Download Electrolux ES 16/1 Specifications

75 0.87 kW
12 kW
230V~ 50 Hz
(single-phase)
400V 3N~ 50 Hz
(three-phase +
neutral)
Blast Chiller
0.45 kW
208V–240V~
50/60 Hz
230V~ 50 Hz
(single-phase)
230V~ 50 Hz
(single-phase)
230V~ 50 Hz
(single-phase)
Stand Mixer
Island/Wall
1 Chimney
Island/Wall
2 Chimneys
Ceiling
Internal blower
4A
2.2 A
1.1 A
2.1 A
3.2 A
5A
15 A
<1 A
18 A
4.5 A
13.2 A
Max
Current
Water Drain
3/4 Cold water supply
Oven drain
(drinking water)
outlet diameter
Max temperature 20 °C,
25 mm
Pressure between
150 and 600 kPa
Max
(1.5–6.0 bar / 22–87 psi)
temperature
– Please see note on
100 °C
water quality below.
Inlet Water
Outlet at the front at
floor level through
the kickplate – see
diagram
Outlet at the front at
floor level through
the kickplate – see
diagram
Air inlets at the front
at floor level
through the kickplate
– see diagram
Natural Gas G20
Air inlets at the front
(20mbar), 1/2
at floor level
bottom side. For
through the kickplate
other gas families see
– see diagram
installation manual.
Air inlets at the front
at floor level
throgh the kickplate
– see diagram
Provide air vent exit on
upper side of cabinet
 100 mm (3 15/16)
Moist air/cooking smell
discharge at rear to be
conveyed externally.
Hot Air Exhaust
Outlet at the
backside of cabinet
– see diagram
Around door - no
connection required
Cold Air Intake
Air intake from the
front side - provide
the air vent inlet in
the area below the
appliance
Gas
In some areas a water treatment system may be needed to prevent damage to the system.
Data on total hardness, conductivity, Chloride Cl – and pH, which are readily available from the water supply company, are needed for the evaluation.
0.85 kW
0.50 kW
0.25 kW
0.75 kW
230V~ 50 Hz
(single-phase)
3.5 kW
Precision
Vacuum Sealer
400V 3N~ 50 Hz
230V~ 50Hz
(single-phase)
Surround
Induction Zone
Sear Hob
230V~ 50 Hz
(single-phase)
Gas Hob
3.5 kW
6.0 kW
400V 3N~ 50 Hz
(three-phase +
neutral)
Combination
Oven
Induction Zone
Nominal
Power
Electrical
Power Supply