Download Chauvet SM-80 User manual

Snapshot
SM-80
Mini Snow Machine™
Ok on Dimmer
Outdoor OK
Sound Activated
DMX512
Master/Slave
115V/230V Switch
Replaceable Fuse
User Serviceable
Duty Cycle
USER MANUAL
Chauvet, 3000 N 29th Ct, Hollywood, FL 33020 U.S.A.
(800) 762-1084 – (954) 929-1115
FAX (954) 929-5560
www.chauvetlighting.com
TABLE OF CONTENTS
1. BEFORE YOU BEGIN ................................................................................................................................ 3
WHAT IS INCLUDED......................................................................................................................................... 3
UNPACKING INSTRUCTIONS ............................................................................................................................. 3
AC POWER ................................................................................................................................................... 3
CONTACT US ................................................................................................................................................. 3
SAFETY INSTRUCTIONS ................................................................................................................................... 4
2. INTRODUCTION ........................................................................................................................................ 5
FEATURES..................................................................................................................................................... 5
PRODUCT OVERVIEW ..................................................................................................................................... 5
3. SETUP ........................................................................................................................................................ 6
SNOW FLUID ................................................................................................................................................. 6
FUSE REPLACEMENT ...................................................................................................................................... 6
MOUNTING .................................................................................................................................................... 6
Orientation ........................................................................................................................................ 6
Rigging ............................................................................................................................................. 6
4. OPERATING INSTRUCTIONS................................................................................................................... 7
MANUAL OPERATION ...................................................................................................................................... 7
TIMER OPERATION ......................................................................................................................................... 7
TROUBLESHOOTING ....................................................................................................................................... 8
TECHNICAL SUPPORT ..................................................................................................................................... 8
5. APPENDIX.................................................................................................................................................. 8
GENERAL MAINTENANCE ................................................................................................................................ 8
RETURNS PROCEDURE ................................................................................................................................... 9
CLAIMS ......................................................................................................................................................... 9
TECHNICAL SPECIFICATIONS ........................................................................................................................... 9
SM-80 User Manual
2
2006-12-13/15:33
1. BEFORE YOU BEGIN
What is included
¾
¾
¾
¾
1 x Mini Snow Machine™
Timer Remote
Warranty Card
User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present, and have been received in good condition. Notify the shipper immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box
and packing.
AC Power
To determine the power requirements for a particular unit, see the label affixed to the back plate of
the unit or refer to the unit’s technical specifications. A unit’s listed current rating is its average current
draw under normal conditions. All units must be powered directly off a switched circuit and cannot be
run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used
solely for a 0% to 100% switch. Before applying power to a unit, check that the source voltage
matches the unit’s requirement.
Warning!
Verify that the voltage required by your unit matches the line voltage applied.
Damage to your unit may result if the line voltage applied does not match the
voltage required by your unit. All fixtures must be connected to circuits with a
suitable Earth Ground.
Contact Us
World Wide
SM-80 User Manual
General Information
Chauvet Lighting
th
3000 North 29 Court
Hollywood, FL 33020
voice: 954.929.1115
fax:
954.929.5560
toll free: 800.762.1084
Technical Support
Chauvet Lighting
th
3000 North 29 Court
Hollywood, FL 33020
voice: 954.929.1115 (Press 4)
fax:
954.929.5560 (Attention: Service)
World Wide Web
www.chauvetlighting.com
3
2006-12-13/15:33
Safety Instructions
Please read these instructions carefully, which includes important
information about the installation, usage and maintenance of this
product.
•
•
•
•
•
•
•
•
•
•
•
•
•
Caution!
SM-80 User Manual
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
This product is intended for indoor use only!
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no
flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
Always disconnect from power source before servicing or replacing the fuse and be sure to replace
with same fuse type and rating.
Secure unit to fastening device using a safety chain.
Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate unit at temperatures higher than
this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center. Always use the same type spare parts.
Don’t connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid aiming the unit at people while it is on.
There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service,
please contact CHAUVET at: 954-929-1115.
4
2006-12-13/15:33
2. INTRODUCTION
Features
•
Adjustable output of snow
•
No warm up time
•
Disperses snow over a large area
•
Wired timer remote included
Product Overview
At the rear:
Fuse holder
Remote control socket
Air volume knob
Fluid
Tank
Manual
Snow
Button
Handle
Nozzle
Safety
Hook
Timer
Remote
SM-80 User Manual
5
2006-12-13/15:33
3. SETUP
Snow Fluid
Before connecting this unit to the mains power supply for the first time you must first fill the fluid
tank with snow fluid and attach the sock to the front of the unit.
Disconnect the power cord before replacing a fuse and always
replace with the same type fuse.
Fuse Replacement
With a flat-head screwdriver, unscrew the fuse
holder from its housing. Remove the damaged
fuse from its holder and replace with exact
The fuse is located
inside this
compartment.
Remove using a flat
head screwdriver.
FUSE
same type fuse. Screw the fuse holder back in
its place and reconnect power.
Mounting
ORIENTATION
The snow machine must be used in a horizontal position sitting on a level surface or it may be
mounted using the bracket provided. Ensure that the snow is not shooting directly at anyone’s face.
Whatever method of installation you choose, the snow machine must not have more than a 15 degree
angle of inclination (tilt).
R IG G IN G
Hanging Clamp
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the
fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
•
•
•
SM-80 User Manual
When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
Safety cables should always be used.
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
6
Note!
Clamp is sold separately.
2006-12-13/15:33
4. OPERATING INSTRUCTIONS
Manual Operation
1)
Plug the remote control unit into the socket at the rear of the unit.
2)
On the rear of the unit, choose desired air volume by adjusting the air volume knob.
3)
Press the power switch on the remote. Red indicator light will illuminate to indicate unit is
working.
4)
Press the “MANUAL” button on the remote control to disperse snow. Snow will continue to
disperse as long as button is depressed.
5)
Adjust output volume dial to desired flow.
Note:
Always monitor snow fluid level as running the machine with no fluid could cause
permanent damage.
Note:
Please do not touch or place anything in close proximity to the nozzle during
operation.
It is advised that the effect be used in well ventilated areas taking care not to obstruct the air vents.
After use, allow time to ‘cool’ for safety before moving or touching.
Timer Operation
1)
Plug the remote control unit into the socket at the rear of the unit.
2)
On the rear of the unit, choose desired air volume by adjusting the air volume knob.
3)
Press the power switch on the remote. Red indicator light will illuminate to indicate unit is
working.
4)
Press the “TIMER” button on the remote control to activate the timer.
5)
Use the “INTERVAL” knob to adjust the time period between outputting snow. Clockwise
increases the interval; counterclockwise decreases the interval.
6)
Use the “DURATION” knob to adjust the length of time snow is output every interval.
Clockwise increases the duration; counterclockwise decreases the duration.
7)
Adjust output volume dial to desired flow.
Note:
Always monitor snow fluid level as running the machine with no fluid could cause
permanent damage.
Note:
Please do not touch or place anything in close proximity to the nozzle during
operation.
It is advised that the effect be used in well ventilated areas taking care not to obstruct the air vents.
After use, allow time to ‘cool’ for safety before moving or touching.
SM-80 User Manual
7
2006-12-13/15:33
Troubleshooting
If you experience low output, pump noise or no output at all, unplug immediately and do the following:
1)
Check fluid level, the external fuse, remote connection and main power supply. If all appear to
be OK, plug the unit in again.
2)
If snow does not come out after holding the remote control button for 30 seconds, check the
hose attached to the tank to make sure there is fluid going through the hose.
3)
If you are unable to determine the cause of the problem, do not simply continue to push the
remote control button as this may damage the unit. Contact CHAUVET Technical Support at the
location below.
Technical Support
Address: Service Dept.
3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.)
Support (Email): [email protected]
Telephone: (954) 929-1115 - (Press 4)
Fax: (954) 929-5560 - (Attention: Service)
Website: http://www.chauvetlighting.com
5. APPENDIX
General Maintenance
Warning:
If your snow machine will be stored for more than 30 days, it must be purged before being
stored. Failure to do so will void your warranty. To purge your fogger or snow machine, follow
the instructions below.
Your snow machine should be purged every 15 days to avoid build-up of particles in the system. To
purge your snow machine, follow these instructions:
1)
Drain the unit of all fluid.
2)
Fill the tank with distilled water.
3)
Run the unit until all the distilled water is consumed (i.e. until the tank is dry).
4)
Store your unit.
5)
It is highly recommended that you run your unit with its respective fluid and then purge the
system AT LEAST once every 30 days.
SM-80 User Manual
8
2006-12-13/15:33
Returns Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products
returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the
fixture. Be prepared to provide the model number, serial number and a brief description of the cause
for the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate
packaging is the customer’s responsibility. CHAUVET reserves the right to use its own discretion to
repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is always a safe
method to use.
Note:
If you are given an RA #, please include the following information on a piece of paper
inside the box:
1)
Your name
2)
Your address
3)
Your phone number
4)
The RA #
5)
A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and
submit claims with the shipper in the event that a fixture is damaged due to shipping. Any other claim
for items such as missing component/part, damage not related to shipping, and concealed damage,
must be made within seven (7) days of receiving merchandise.
Technical Specifications
WEIGHT & DIMENSIONS
Length........................................................................................................................... 13.5 in (343 mm)
Width ..................................................................................................................................6 in (152 mm)
Height .................................................................................................................................7 in (178 mm)
Weight .............................................................................................................................. 5.4 lbs (2.4 kg)
Tank capacity .....................................................................................................................................1 qt
OUTPUT
Volume ............................................................................................................8 cubic inches per minute
THERMAL
Maximum ambient temperature...........................................................................................104°F (40°C)
FUSE
110V Operation ................................................20mm 7A 125V slow blow or 20mm 7A 250V slow blow
230V Operation .............................................................................................. 20mm 4A 250V slow blow
ORDERING INFORMATION
Snow Machine ............................................................................................................................... SM-80
Wireless Remote ..............................................................................................................................FC-5
DMX Converter........................................................................................................................... DMX-3F
WARRANTY INFORMATION
Warranty .............................................................................................................. 1-year limited warranty
SM-80 User Manual
9
2006-12-13/15:33