Download Epson EH-TW550 User`s guide

Problem Solving
89
Moving images are not displayed
Check
Remedy
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Are the contents of the moving image you are trying to project
copyright protected?
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Projection stops automatically
Check
Is Sleep Mode set to On?
Remedy
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.
s Extended - Operation - Sleep Mode p.78
The message "Not supported" is displayed
Check
Is the image signal format setting correct?
(Only when projecting images from a video source)
Remedy
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.75
Do the image signal resolution and the refresh rate correspond to the Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
mode?
the computer.
(Only when projecting computer images)
s "Supported Monitor Displays" p.110
The message "No Signal" is displayed
Check
Are the cables connected correctly?
Remedy
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "From Installation to Projection" p.28