Download Vizio E470VL User manual

1
E470VLE
3. Using a Phillips-head screwdriver,
attach the base to the TV by inserting
and tightening the included screws.
Be sure the mount you choose is capable of supporting the weight of the TV. After
you have determined that you have the correct mount for your TV, you can begin
the installation.
To install your TV on a wall:
1. Disconnect any cables connected to
your TV.
4. Move the TV with attached stand into
an upright position and place on a flat,
level, and stable surface.
2. Place the TV face-down on a clean,
flat, stable surface. Be sure the surface
is clear of debris that can scratch or
damage the TV.
5. To ensure proper ventilation, leave at
least 1” of space between the back of
the TV and any other objects (walls,
etc).
1”
3. Using a Phillips-head screwdriver,
remove the base by loosening and
removing the screws.
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult the information
below to find the appropriate mount for your TV model:
E470VLE
Screw Size:
M6
Screw Length:
20mm
Screw Pitch:
1.0mm
Hole Pattern:
200mm (V) x 400mm (H)
Installing a TV on a wall requires lifting. To prevent injury or damage
to the TV, ask someone to help you.
2
4. Attach your TV and wall mount to the
wall, carefully following the instructions
that came with your mount.
Use only with a UL-listed wall
mount bracket rated for the weight/
load of this TV. See Appendix A Specifications for the weight of this TV.