Download Dell UCS-71 User`s guide
Transcript
PERC H200.book Page 23 Tuesday, July 13, 2010 4:15 PM LED Port Activity Feature for 6Gbps SAS HBA Only The 6Gbps SAS HBA controllers are equipped with port activity or status LEDs. The LEDs enable you to quickly determine the status of an external SAS port. Each x4 connector has its own set of LEDs. Table 3-3 describes the color of the LEDs and corresponding SAS port state. Table 3-3. x4 Connector LEDs Description LED Color SAS Port State Off It means any one of the following: • Power is off. • Port has been reset. • All links in the port are either disconnected or the cable is disconnected. Green All links in the port are connected and functional. Amber One or more links in the port is not connected. This is only applicable in a wide port configuration. PERC H200 and 6Gbps SAS HBA Features 23