Download Setra Systems 12000C Product specifications
Transcript
Ultra-Low Pressure Generating and Documenting Calibrator SPECIFICATIONS Measurement General Specifications Pressure Transducer Accuracy ±0.04% FS Pressure Units (Selectable) n.W.C., PA, kPa, mbar, cm W.C. Pressure Fittings Barbed, Plug-in O-ring Quick Connects Precision 0.0002” W.C. Warmup 1 Hour Electrical Banana Plug Jacks Reading Rate 20 Readings/Seconds, Typical Voltage Meter ±0.005% FSO at ±10.5 VDC Gravity/Orientation Negligible Current Meter ±0.005% FSO at 4 to 20 mA Shock and Vibration 5g, Maximum Excitation 24 VDC Nominal for 4 to 20 mA Output, Adjustable to 5 to 24 VDC for Voltage Output Communications RS 232 Control Display 3.5” Transflective Type TFT Color, QVGA, 64-k Color Controlled Pressure Stability 0.0002” W.C., Typical Calibration Stability (Pressure Span) 0.2% Rdg./yr Calibration Stability (mA and Voltage) 0.01% FS/yr Calibration Adjustment Zero Tare Compensated Temperature Range 40°F to 120°F Storage Temperature Range 40°F to 160°F Temperature Effect (Zero) None, Zero, Tare Keypad Pocket PC Touch Pad Minimum Controlled Pressure 0.00005” W.C. Temperature Effect (Span) 0.01%°F Size: 11” x 14” x 6” (27.9 cm x 35.6 cm x 15.2 cm) Dual Reference Pressure Ranges See Order Info. Certification NIST Weight 16 lbs. (8.2 kg) Pressure Types Gauge and Differential Pressure Media Clean, Dry, Non-Corrosive Gases Overpressure Limit 5 Psid Power 120/240 AC, 50/60 Hz, Battery Li Ion - 8 Hours Operation, Integrated Charger Control Time User Selectable calibrators DIFFERENTIAL PRESSURE Model 869/869XP Electrical Connections + EXC 24VDC SIG (+) _ EXC COM EXC COM +SIG -SIG SIG COM EXC 24VDC COM EXC 24VDC COM SIG (-) SIG (+) SIG (-) SIG (+) SIG (-) P-Switch SPST Current Internal Excitation 3-Wire Internal Excitation EXC 24VDC SIG (+) External Power Supply + _ + _ External Power Supply + _ EXC COM SIG External Power Supply COM EXC 24VDC COM EXC 24VDC COM SIG (-) SIG (+) SIG (-) SIG (+) SIG (-) 4-Wire Internal Excitation + _ 3-Wire External Excitation Current External Excitation EXC COM +SIG -SIG EXC 24VDC SIG (+) COM SIG (-) 4-Wire External Excitation ORDERING INFORMATION Ordering Example: 86910R5WD015WDPN = 869 Calibrator, 0 to 5 in. WC (Range One) to 0 to 15 in. WC (Range Two), PDA Included with a Standard Pharmaceutical Interface. 8 6 9 1 Range One Range Two PDA 8691 = 869 Inches.W.C. Pascal 0R5WD 0 to 0.5 050LB ±50 001WD 0 to 1 100LD 0 to 100 005WD 0 to 5 100LB ±100 2R5WD 0 to 2.5 250LD 0 to 250 015WD 0 to 15 250LB ±250 R25WB ±0.25 500LD 0 to 500 0R5WB ±0.5 500LB ±500 001WB ±1 10CLD 0 to 1000 2R5WB ±2.5 10CLB ±1000 005WB ±5 35CLD 0 to 3500 015WB ±15 35CLB ±3500 P User Interface Includes PDA N Standard User Interface E Expert System SSP-869 Rev B 12/07 Model For calibrating hard to reach analog transducers, a 2-wire and 4-wire configurable length electropneumatic assembly is available from 6 to 15 feet. ©2014 Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc. Phone: 800-257-3872 • Fax: 978-264-0292 • setra.com 95