Download ELATION EZ KLING - USER MANUAL ver 2

Transcript
www.elationlighting.com.
KLINGNET MODE - LED Color Set
Press the MODE button to select "KINGNET". The LCD display will show the default LED
Color Set "DMX RGB". To change this menu item press the SET UP button and "RGB"
will start to flash, then press the UP or DOWN buttons to select the desired LED Color
Set. ("DMX RGB", "DMX RGBW", "DMX RGBA")
KLINGNET MODE - Pixel Height and Width Set
Press the MODE button to select "KINGNET". The LCD display will show the
preselected LED Color Set ("DMX RGB", "DMX RGBW", "DMX RGBA"). Press the SET UP
button and "DMX" will start to flash, then press the SET UP button again and the
preselected LED Color Set ("RGB", "RGBW", "RGBA") will start to flash. Press the SET UP
button again and the LCD display will show "H: xxx", then press the UP or DOWN
buttons to enter the Pixel Height number EZ KLING™ needs to control.
Once the Pixel Height number value has been selected, then press the SET UP
button and the LCD display will show "W: xxx", then press the UP or DOWN buttons to
enter the Pixel Width number EZ KLING™ needs to control.
NOTE: The Pixel Height number multiplied by the Pixel Width number can NOT be
greater than 600 pixels when controlling LED Tape, or NOT greater than 170 pixels
when controlling RGB Tri-Color LED Lighting, and NOT greater than 112 pixels when
controlling RGBW/RGBA LED Lighting.
ARTNET MODE - Type Set
Press the MODE button to select "ARTNET". The LCD display will show "OUT:TAPE" or
"OUT: DMX". Select one of these two menu items by pressing the UP or DOWN
buttons.
ARTNET MODE - IP Address Set, Sub Net Mask Set, and DMX Universe Output Set
Press the MODE button to select "ARTNET", then press the SET UP button to select IP
Address Set. The LCD display will show "ARTNET IP0: !!!" then press the UP or DOWN
buttons to enter the desired 3-digit IP Address of Section 1, then press the SET UP
button to select "ARTNET IP1: !!!" and press the UP or DOWN buttons to enter the
desired 3-digit IP Address of Section 2, then press the SET UP button to select "ARTNET
IP2: !!!" and press the UP or DOWN buttons to enter the desired 3-digit IP Address of
Section 3, then press the SET UP button to select "ARTNET IP3: !!!" and press the UP or
DOWN buttons to enter the desired 3-digit IP Address of Section 4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13" " " " " " " " " " " " " " " " " " " " " EZ.KLING™.User.Manual.Version.2