Download Precision Power Analyzers - Equipements Scientifiques

N4
Precision Power Analyzers
Leading wideband accuracy
Wide frequency range
Fast sample rate and No-Gap
Leading phase accuracy
Built in high precision current shunt
Versatile interfaces
Range of PC software options
PPA5500 Series
PPA1500 Series
Basic 0.02% (PPA5500) plus class leading high frequency performance
DC, 10mHz to 2MHz PPA5500 (30Arms) and PPA5500-LC (10Arms)
DC, 10mHz to 1MHz PPA5500-HC (50Arms), PPA1500 (20Arms) and PPA1500-HC (30Arms)
2.2M samples/s (PPA5500) 1M samples/s (PPA1500)
High accuracy is maintained even with noisy or distorted power applications
0.005 Degrees plus 0.01 degrees per kHz (PPA5500)
30Arms (PPA5500), 10Arms (PPA5500-LC), 50Arms (PPA5500-HC), 20A/30Arms (PPA1500/HC)
All models also support external shunt resistors or current transformers
RS232, USB, GPIB (PPA5500 option), LAN (option), Torque and Speed (PPA5500)
Remote control and monitoring of real time data, tables and graphs plus export of
measured data into various PC formats
(ES) Equipements Scientifiques SA - Département Réseaux sans fil - 127 rue de Buzenval BP 26 - 92380 Garches
Tél. 01 47 95 99 50 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
PPA5530 Precision Power Analyzer
FRONT VIEW
③
①
④
⑥
⑤
⑦
⑧
②
① FRONT USB PORT
USB memory port allows data to be saved directly to a USB pen drive
② POWER BUTTON
③ DISPLAY SCREEN
White LED backlight colour TFT display with high contrast and wide viewing angle
④ SCREEN DISPLAY OPTIONS
Zoom, Real time, Table and Graph options
⑤ MEASUREMENT FUNCTION SELECTION BUTTONS
• POWER ANALYZER
• POWER INTEGRATOR
• HARMONIC ANALYZER
• TRUE RMS VOLTMETER and AMMETER
PPA5500 SERIES
• IMPEDANCE METER
• OSCILLOSCOPE
PPA1500 SERIES
⑥ MEASUREMENT SETTINGS BUTTONS
MODE SELECTION
Acquisition settings - Sets wiring configuration,
Smoothing and data logging
Coupling - Set coupling to AC, DC or AC+DC, also set bandwidth
Range - Internal or external attenuator, autoranging settings, scale factors
Application mode - PWM, ballast, inrush current, power transformer, standby power
Plus direct configuration of - Alarm, Auxiliary, Remote, System and Program functions
⑦ MENU SELECTION AND CURSOR CONTROL
⑧ START, STOP, ZERO AND TRIGGER
Trigger button refreshes measurement, Zero resets datalog or allows an offset trim
Start and Stop buttons provide manual control of a measurement period
2
REAR VIEW
⑨
⑨
⑬
⑩
⑨
⑬
⑪
⑫
PPA5530 (3 Phase)
⑨ PHASE INPUTS
Direct voltage Input: 3kVpk (1kVrms) in 9 ranges
Direct current Input: 300Apk (30Arms) Standard Model, 30Apk (10Arms) Low Current
Model, 1000Apk (50Arms) High Current Model
External voltage and current sensor inputs to 3Vpk in 9 ranges - BNC Connector
PPA1500: 300Apk (20Arms) direct current input, PPA1500-HC: 1000Apk (30Arms)
⑩ SYNC CONNECTOR
All PPA models can offer 6 phase analysis using the PPA dual data log PC program
Additionally two PPA5530's can be connected via the extension port and sync BNC
connector to form a 6 phase analyzer when a PC is not available (PPA5500 only)
⑪ EXTERNAL SENSOR INPUTS
+/-10V or pulsed input from torque and speed sensors provides direct measurement of
mechanical power + Analogue output (PPA5500 only)
⑫ PC INTERFACE CONNECTIONS
Standard interfaces RS232 + USB + LAN (Optional) + GPIB (Optional on PPA5500 only)
⑬ LOW NOISE EFFICIENT FANS
Air bearing low noise fans are utilized to ensure minimum audible and electrical noise
while maintaining a stable operating temperature for the high precision low inductance
internal current shunts
③
④
⑥
①
⑤
⑦
②
⑨
⑨
⑨
⑧
⑫
PPA1530 (3 Phase)
3
FEATURES
■ High Speed Power Measurement
PPA5500
Measurements include all frequency components in power waveforms for example, fundamental, harmonics of the
fundamental and the carrier of a PWM inverter output by maintaining 2.2Ms/s sampling at any drive frequency
●
200kHz
●
●
●●
●●
●●
●●
●
●
●
●●
●●
●●
●●
●
●
●
●
50/60Hz
●●●●●
●
●
●●
●●
●●
●●
●●
●
●●
●●
●●
●●
●●
●
●
※PPA1500 sample rate 1MS/s
PWM
●●●●●
●
High sample rate at all times
Inverter output waveform
Unique FPGA and DSP architecture permits full
2.2Ms/s sample rate at any fundamental frequency
PWM carrier signal
Fast sampling reliably captures fast switching
waveforms
■ 2MHz Wideband Frequency Response
PPA5500
With 2MHz bandwidth and exceptionally flat response, the PPA provides precision analysis of total power in
applications such as lighting ballasts or PWM drives that involve a wide range of frequency components. Proprietary
to N4L, a digital process called Expanded Nyquist Sampling ensures no alias components
Low Bandwidth
Filtering
PPA Wide Bandwidth
Analysis
Voltage
Fundamental
+ Harmonics
Carrier, Harmonics
of Carrier + Noise
Frequency
PWM Frequency Range
■ High Accuracy
PPA5500
Unique voltage and current analogue card design ensures high accuracy for both power and harmonic analysis
Class Leading
Power Accuracy
Power Accuracy: [0.03% + 0.03%/pf + (0.01% x kHz)/pf] Rdg + 0.03%VA Rng
240V (300V Range), 1A (3A Range), Power Factor : 1
100.0%
10.0%
Accuracy〔%〕
1.0%
0.1%
4
0.1
1
10
100
1000
Frequency〔Hz〕
10000
100000
1000000
■ DFT Real Time No Gap Analysis
PPA5500
PPA1500
Many power applications have fast changing asynchronous current pulses which are not suited to fixed data
length FFT analysis. The PPA series combine a real time DFT (Discrete Fourier Transform) technique with
variable window no gap analysis to ensure the optimum speed and accuracy at all times
Low Duty Cycle Standby Current
Event
Event
Event
PPA Series IEC62301 Testing
Event
Missed
Gapped analysis causes events to be missed, resulting
in inaccurate measurements
・Missing data compromises power accuracy
・Long term measurement integration achieves
approximately correct average power
■ Up to 6 Phase Analysis
Event
Event
Event
FPGA/DSP Real time measurement with no gap
・Real Time No Gap analysis ensures correct
power measurement
・Simultaneous fundamental and pulse frequency
synchronization quickly obtains the correct power
PPA5500
Master/Slave mode enables two PPA5530's to be fully synchronized into a single 6 phase measurement system
※4 or more phase measurements provided via N4L PC software or master slave mode
INVERTER DRIVE
Ph1
Three Phase
Motor
Rectifier
Ph2
I1
I2 I
3
V1
V2
V3
Ph3
Torque &
Speed
Sensor
PWM
Sync Cable
（Extension+Coaxial）
PPA5530（Master）
3Ph Input
PPA5530（Slave）
3P3W + Mechanical Power
3P2W + Independent Ph3
DC Bus
3Ph PWM Output
Mechanical Power
Advantages of Dual PPA vs Single instrument
・Twice the processing power as one unit
・Flexibility between different applications
・Units fully synchronized giving single point of control
Measurement parameter examples
・Input/Output power measurement
・Efficiency of the inverter
・Inverter output voltage harmonics
・Motor drive characteristics
5
FUNCTIONS
■ Input Torque and Speed Sensor
PPA5500
Direct measurement of torque and speed from dedicated inputs that are fully synchronized with the voltage and
current channels permits true real time power conversion efficiency to be evaluated
①
②
③
①TORQUE Bipolar±10V
Bipolar±10V / pulsed
②SPEED
③ANALOGUE Analogue output of
selected function ±10V
Graph
Real time data
■ Built in Amplifier and Unique Shunt Resistor
AMP &
Attenuator
Model
PPA5500
A/D
Converter
Low Current Model
9 ranges: 3mApk - 30Apk (10Arms)
100mΩ Shunt
PPA1500
PPA5500
—
PPA1500
The PPA series use a single shunt resistor
unique to N4L that combines exceptional
linearity and no need for relay switching
which can cause measurement errors
Standard Model
High Current Model
9 ranges: 30mApk - 300Apk (30Arms) 9 ranges: 100mApk - 1000Apk (50Arms)
10mΩ Shunt
3 mΩ Shunt
8 ranges: 100mApk - 300Apk (20Arms) 8 ranges: 300mApk - 1000Apk (30Arms)
10mΩ Shunt
3mΩ Shunt
x10 Mode - 10mApk - 30Apk
x10 Mode - 30mApk - 100Apk
External shunt options
(DC ～ 1MHz, 0.1% Accuracy, Inductance<1nH)
Model
HF500
HF200
HF100
HF020
HF006
HF003
Maximum Current
Rated A
Peak
500Arms
5000Apk
200Arms
2000Apk
100Arms
1000Apk
20Arms
200Apk
6Arms
60Apk
3Arms
30Apk
Bandwidth
DC ～ 1MHz
HF003
Selected Shunt
Measured Current
exceeds capacity of
internal shunt (such as
EV motors)
Selected Shunt
Shunt output
Current
Detection
HF500
Shunt output
Current
Detection
HF003
Utilising external shunt resistors
6
HF500
Small battery powered
equipment
MEASUREMENT DISPLAY
■ Power Analysis
PPA5500
PPA1500
Any parameters can be enlarged with the
zoom function
Zoom function enabled on total watts, rms voltage, rms current and frequency
All power measurement and
RMS values are computed
simultaneously allowing any
measured value to be selected
and viewed during analysis
Here, three phase total power is
selected with all primary power
functions in each phase plus
frequency, a selected harmonic,
dc watts and phase to phase
voltage
Mechanical power, Maths and
Efficiency functions can also be
added to this screen giving real
time analysis of all electrical or
electrical to mechanical systems
3 Phase analysis display selectable in both Total and Fundamental values
MEMORY
Large 1GB (PPA5500 series) internal memory, data
logging from 10ms intervals with synchronization
to the fundamental frequency and no gap between
measurements
Datapoint storage up to 10M in the PPA5500 series
and 16k in the PPA1500 series
Alternatively the data can be stored in an external
USB pen drive or directly to PPA Dual Data Logger
PC software
Voltage, Current, Frequency and
Power - Examples of graph mode
Trend analysis
7
MEASUREMENT MODES
■ Power Integrator (power consumption) Mode, RMS Meter Mode and
Impedance Meter Mode PPA5500 PPA1500
Power Integrator mode
RMS Voltmeter mode
Impedance meter mode
Note
In addition to detailed measurements of the phase power parameters, you can check the balance of power
between the phases and observe computed neutral current when 3 phase 4 wire connection is selected
■ Harmonic Analyzer and Oscilloscope
Harmonic analyzer (Bar graph)
PPA5500
PPA1500
Harmonic analyzer summary page
Harmonic analyzer table
Oscillosope - Voltage and Current display, Phase 1,2 and 3
Note
In Harmonic Analyzer Mode, the PPA1500 provides up to 50 Harmonics with real time, table or bar graph
presentation. Measurements are in absolute magnitude and percentage of fundamental with harmonic phase also
available. The PPA5500 extends the harmonic range to 375 for aerospace applications and also includes an FFT
spectrum mode for analysis of interharmonics
8
ACQUISITION SETTINGS
■ Auto-Ranging, Range Up Only or Manual
PPA5500
PPA1500
Range modes are selectable
Performs automatic switching of voltage and current ranges up and down depending on the level of
①Auto-Ranging
the measured value with all inputs linked or ranged independently to ensure optimum accuracy
Performs automatic ranging when the input is 120% of range, ranging up only
②Range up only
No automatic ranging, user specifies the range in which to operate
③Manual
(Used when input voltages and currents are known)
■ Independently Set Input Coupling
PPA5500
Independently set input coupling so different methods of sensing can be implemented. Such as a CT on phase 1
and shunt sensing on phases 2 + 3
■ Wiring Settings
PPA5500
PPA1500
Various wiring arrangement
settings to satisfy a complete
range of setups found in power
analysis
HI
ACH1 LO
HI
VCH1
LO
LO
N
LO
N
LO
VCH2
L
HI
HI
1 Phase 1 Wattmeter
LOAD
VCH1
LOAD
HI
LOAD
L
ACH1
HI
LOAD
L
ACH2 LO
2 Phase 2 Wattmeter
or
HI
Ph1
ACH1 LO
Ph1
HI
Ph2
ACH2 LO
Ph2
HI
Ph3
ACH3 LO
Ph3
HI
HI
HI
VCH1
VCH2
VCH3
LO
LO
LO
or
3-phase 3 Wattmeter(Reference to neutral)
9
ACQUISITION SETTINGS
■ Bandwidth Settings
PPA5500
DC(DC-5Hz)DC measurements up to 5Hz
Low(DC-30kHz)Basic power (50/60Hz) including harmonics of the
fundamental while rejecting high frequency noise
Wide(DC-2MHz)
Wideband applications such as PWM inverter drives including all power components for true total power
Example of independent wiring configuration
showing 3 phase individual coupling settings
Note
The PPA5500 series includes a programmable digital filter that allows users to set a preferred bandwidth
■ Display Settings, Smoothing Response and Frequency Reference
①Display update rate
Various settings for the display
update rate (12.5ms ～ 10s) which
also increases the smoothing when
used together with the smoothing
option. A 'window' option permits
direct control of the measurement
window size
PPA5500
PPA1500
Example of setting the window, eg (50Hz set to 20ms)
②Smoothing settings
Wo r k i n g i n c o n j u n c t i o n w i t h
the speed setting, a smoothing
filter can then be applied to the
measurements. Normal and slow
options are available which apply
an increasing time constant to the
output of the measurement window
■ Frequency Reference
PPA5500
・Display update speed settings
・Setting the filter (normal/slow)
PPA1500
When making a precision measurement of ac power,
correct synchronization with the fundamental frequency
is essential. The PPA series provides a solution to
frequency synchronization in a wide range of applications
including Standby Power, Variable Speed Drives,
Electronic Ballasts and DC to AC Inverters with the option
to select voltage, current, speed or ac line input as the
frequency reference. The PPA5500 series also provides
fully independent frequency detection an all phase inputs
1:5 cycle (10Hz standby current period)
Power measurements synchronized to low duty cycle
current pulses of a power supply in standy mode
10
1:5 duty cycle standby power measurement cycle
1:50 low duty cycle (1Hz) power measurement
APPLICATIONS
■ Application Modes
PPA5500
PPA1500
In addition to the usual power measurements, various modes are pre programmed into the instrument including
"PWM motor drive*", "ballast lighting system", "inrush current", "power transformer*" and "standby power"
*PPA5500 only
Battery
Graphical display
Input signal
Inverter output
signal
Inverter
Motor
Load
Example setup when measuring inverter output with respect to load
Mode Selection
PWM torque and speed sensor selection
Scale factor of analogue
speed and torque inputs
■ Inductance Loss Analysis
PPA5500
PPA1500
An example of analysis of dynamic inductance losses
Real time data
11
PC CONTROL AND DATA ACQUISITION
■ PC Software
PPA5500
PPA1500
Analysis carried out by the instrument can easily be transferred to a PC via USB, RS232 or LAN
① PPAcomm PC control, data storage and print
The instrument can be controlled
from the PC software remotely
Real Time Data Display
② PPA Dual Data Logger Exceptional flexibility and ease of use with all the primary functions of PPAcomm plus
master/slave mode for 4-6 phase applications and data/image export to Text file, Excel, Bitmap or Clipboard
Simultaneous
display of master
and slave units
Real time Datalog
a. Measurement parameters are chosen by the user from tick box options
b. Real time results can be displayed as latest value, table or Graph
c. Datalogging results are then saved in the selected format
Capture up to 60 measured functions per line
Data Export options
A Bitmap image of any PPA screen image can be copied
to clipboard or imported directly into documents
Measurement tables generated by the data logging function can
be exported directly to Excel
12
③ PPA Standby Power.
Full compliance testing to IEC62301
On completion of the
standby test, a full test
report can be exported
directly to a spreadsheet
Standby power test screen with real time update of IEC62301 criteria
■ Connection Interface
PPA5500
PPA1500
RS232 (standard), USB (standard), LAN (optional), GPIB (option for PPA5500 series)
PPA5500 Series
PPA1500 Series
■ Data Logging
PPA5500
PPA1500
Utilizing sophisticated frequency detection techniques, synchronization with the fundamental ac waveform is
automatically achieved. Datalog intervals can be set from 10ms with measurements saved to a PC or internal memory
Datalog menu, interval set to 10ms
13
SPECIFICATION
PPA5500
PPA1500
General
Crest Factor
20(Voltage and Current)
Sample Rate
2.2Ms/s on all channels, No-Gap
1Ms/s on all channels, No-Gap
Standby Power
IEC62301 Compliance
Application Modes
PWM Motor Drive, Ballast, Inrush, Power Transformer, Standby Power
Ballast, Inrush, Standby Power
Frequency Range
DC,10mHz ～ 2MHz - PPA5500-LC(10Arms), PPA5500(30Arms)
DC,10mHz ～ 1MHz - PPA5500-HC(50Arms)
Voltage Input
300mVpk ～ 3000Vpk(1000Vrms) in 9 ranges
(240Vrms within 300Vpk range, using 20% overange)
Range
Internal
Accuracy
External
0.02% Rdg+0.03% Rng+(0.004%×kHz)+1mV
300µVpk ～ 3Vpk in 9 ranges【BNC connector 3Vpk max input】
Range
Accuracy
Normal
DC,10mHz ～ 1MHz
x10
DC,10mHz ～ 100kHz
Normal
x10
Normal
x10
1Vpk ～ 2500Vpk(1000Vrms) in 8 ranges
100mVpk ～ 300Vpk in 8 ranges
0.05% Rdg+0.1% Rng+(0.005%×kHz)+5mV
0.05% Rdg+0.1% Rng+(0.01%×kHz)+1mV
1mVpk ～ 3Vpk in 8 ranges【BNC connector 3Vpk max input】
0.02%Rdg+0.03%Rng+(0.004%×kHz)+1µV
0.05%Rdg+0.1%Rng+(0.005%×kHz)+5µV
Current Input
10Arms Low Current
(PPA5500-LC)
4mm safety connectors
Internal
External input
(External shunt
Current sensor)
30Arms Current
(PPA5500)
4mm safety connectors
3mApk ～ 30Apk(10Arms) in 9 ranges
20Arms
(PPA1500)
0.02% Rdg+0.03% Rng+(0.004%×kHz)+
Shunt 4mm
Accuracy
10µA
Safety
Connectors
Ranges
30mApk ～ 300Apk(30Arms) in 9 ranges
Ranges
0.02% Rdg+0.03% Rng+(0.004%×kHz)+ 30Arms
Accuracy
(PPA1500-HC)
100µA
Shunt 4mm
Ranges
100mApk ～ 1000Apk(50Arms) in 9 ranges Safety
50Arms High Current
(PPA5500-HC)
0.03% Rdg+0.06% Rng+(0.004%×kHz)+ Connectors
Accuracy
Touch proof screw terminal
100µA
BNC connector
Ranges
300µVpk ～ 3Vpk in 9 ranges
(Max input
BNC Connector (Max
0.02% Rdg+0.03% Rng+(0.004%×kHz)+ 3Vpk)
input 3Vpk)
Accuracy
1µV
Ranges
Accuracy
Ranges
Accuracy
Ranges
Normal 100mApk ～ 300Apk(20Arms) in 8 ranges
x10
10mApk ～ 30Apk in 8 ranges
Normal 0.05% Rdg+0.1% Rng+(0.005%×kHz)+500µA
x10
0.05% Rdg+0.1% Rng+(0.01%×kHz)+100µA
Normal 300mApk ～ 1000Apk(30Arms) in 8 ranges
x10
30mApk ～ 100Apk in 8 ranges
Normal 0.05% Rdg+0.1% Rng+(0.005%×kHz)+1mA
x10
0.05% Rdg+0.1% Rng+(0.01%×kHz)+300µA
1mVpk ～ 3Vpk in 8 ranges
Accuracy 0.05% Rdg+0.1% Rng+(0.005%×kHz)+5µV
Phase Accuracy
0.005deg+(0.01deg×kHz)【PPA5500-LC(10Arms), PPA5500(30Arms)】
0.01deg+(0.02mdeg×kHz)【PPA5500-HC(50Arms)】
Normal
0.01deg+(0.01deg×kHz)
x10
0.01deg+(0.02deg×kHz)
Normal
[0.1%+0.1%/pf+(0.01%×kHz)/pf] Rdg+0.1%VA Rng
x10
[0.1%+0.1%/pf+(0.02%×kHz)/pf] Rdg+0.1%VA Rng
Power Accuracy
[0.03%+0.03%/pf+(0.01%×kHz)/pf] Rdg+0.03%VA Rng
CMRR - Common Mode Rejection Ratio
250V @ 50Hz - Typical 1mA (150dB)
100V @ 100kHz - Typical 3mA (130dB)
Measurement Parameters
Total Power (W), Apparent Power (VA), Reactive Power (Var), Power Factor (pf), Voltage (V) & Current (A) - rms, rectified mean, AC, DC, Peak, Surge
Crest Factor, Form Factor, Star to Delta Voltage
Frequency (Hz), Phase (deg), Fundamentals, Impedance
Harmonics, THD, TIF, THF, TRD, TDD
Integrated Values, Datalog, Sum and Neutral values
Datalog - Up to 4 user selectable measurement functions (30 with optional PC software)
Datalog Window
No-Gap analysis, Minimum window 10ms
Memory
10M records into flash RAM (Non-Volatile)
RAM up to 16,000 records
Communication Ports
RS232
Baud rate up to 38.4kbps,RTS/CTS flow control
LAN(Option L)
10/100 Base-T Ethernet auto sensing
GPIB(Option G)
IEEE488.2 Compatible
—
USB
USB 2.0 and 1.1 compatible
USB
USB memory port
Analogue Output
Speed Input
Torque
Bipolar ±10V(BNC)
—
Analogue bipolar±10V or Pulse count(BNC)
—
Bipolar ±10V(BNC)
—
4 〜 6 Phase (Master/Slave) + Auxilary
Auxilary Port
4 〜 6 Phase measurement (Master/Slave)
Sync
Extension
—
Standard Accessories
Leads
Connection Cables
Connection Clips
CD-ROM
Power, RS232, USB
36A 1.5m long 4mm stackable terminals
1x red, 1x yellow and 2x black per phase (1x red, 1x black with HC version)
20A (Std version) or 30A (HC version) 1.5m long 4mm stackable terminals
1x red, 1x yellow and 2x black per phase
4mm terminated aligator clips - 1x red, 1x yellow and 2x black per phase (1x red and 1x black per phase with PPA5500-HC version)
CommView2 (RS232/USB/LAN), Command line, Script based communication software
Instruction
Manual
User manual, Communications manual
Other Documents
Calibration certificate, Quick start guide
General
Display
Dimensions
Weight
Safety Isolation
Power supply
14
320×240 dot full colour TFT, White LED Backlit
480×272 dot full colour TFT, White LED Backlit
130H×400W×315D mm excluding feet
92H×215W×312D mm excluding feet
5.4kg(1 Phase), 6kg(3 Phase)
3.3kg(1 Phase), 4kg(3 Phase)
1000Vrms or DC(CATII), 600Vrms or DC(CATIII)
90 〜 265Vrms, 50 〜 60Hz, 40VAmax
MODELS
PPA5500 Series
Phases
Model
1 Ph
PPA5510-LC
2 Ph
PPA5520-LC
3 Ph
PPA5530-LC
4 Ph
PPA5540-LC
5 Ph
PPA5550-LC
6 Ph
PPA5560-LC
Phases
Model
Specification
DC,
10mHz ～ 2MHz
3mApk ～ 30Apk
(10Arms)
PPA5500 3 Phase model
1 Ph
PPA5510
2 Ph
PPA5520
3 Ph
PPA5530
4 Ph
PPA5540
5 Ph
PPA5550
6 Ph
PPA5560
Phases
Model
1 Ph
PPA5510-HC
2 Ph
PPA5520-HC
3 Ph
PPA5530-HC
4 Ph
PPA5540-HC
5 Ph
PPA5550-HC
6 Ph
PPA5560-HC
Specification
DC,
10mHz ～ 2MHz
30mApk ～ 300Apk
(30Arms)
Specification
DC,
10mHz ～ 1MHz
100mApk ～ 1000Apk
(50Arms)
PPA5500 units in Master/Slave mode, synchronised for 4-6 Phase measurements
Touchproof 50A
screw connectors
used on
PPA5500-HC and
PPA2600-HC
versions
PPA1500 Series
Phases
Model
Specification
1 Ph
PPA1510
2 Ph
PPA1520
DC,
10mHz ～ 1MHz
100mApk ～ 300Apk
(20Arms)
3 Ph
PPA1530
1 Ph
PPA1510-HC
2 Ph
PPA1520-HC
3 Ph
PPA1530-HC
PPA1500 3 Phase model
DC,
10mHz ～ 1MHz
300mApk ～ 1000Apk
(30Arms)
Accessories
Leads and Interfacing
Type
36A 4mm to spade (option)
Specification
1.5 Meter - 36A lead set with 4mm stackable safety terminals
1x Red, 1x Yellow and 2x Black per phase plus alligator clips
1.5 Meter - 36A lead set with 4mm to spade for HC terminals
RS232 cable
RS232 9pin serial Cable
USB cable
USB to 9-pin RS232 (Option)
Master-Slave cable (Option)
USB 2 Meter A male to B male
USB ～ 9-pin RS232 Serial Converter
Leads for connecting 2x PPA5500 in master/slave mode
36A Connection lead set
Interface (Optional)
Type
PPA-LAN interface
PPA-GPIB interface
PC Software (Optional)
Type
PPA Dual Data Logger
PPAcomm
PPA Standby Power
PPAsoft PC software
Rack Mount Kit (Optional)
Type
Specification
Rack Mount brackets
PPA26/5500 19in rack mount brackets (model specific)
Rack Mount panel
PPA2500 19in rack facia panel
Carry cases (Optional)
Type
Soft carrying case
Hard flight case
Specification
Option L - LAN Interface
Option G - GPIB(IEEE488)Interface - PPA25/26 and 55 series
Specification
PC control and data acquisition of 1 to 6 phases with selectable
Real Time data, Graphing, Datalog and versatile export options
Basic PC Control, Data storage, Print features
Standby power measurements and reporting to IEC62301
LabView based software, PC Control, Data storage and Print
P R O D U C T
PPA1500
Basic Accuracy
V, A rdg error
Power rdg error
Phase
Internal
Master/Slave
operation
Voltage Input
Max input voltage
No. of ranges
Direct Current Input
10Arms model
20Arms model
30Arms model
50Arms model
No. of ranges
Connection and extension port accessories (Optional)
Type
Specification
Breakout box
Simple analyzer connection between source and DUT
PCIS
10Arms 300Apk rated Phase Controlled Inrush Switch
0.05%
0.10%
PPA2500/PPA2600
0.04%
0.05%
1〜3
4〜6
—
2500Vpk
8
—
○
○
—
8
3000Vpk
8
○
—
○
only PPA2600
8
Documents (Standard)
Type
9
○
—
○
○
9
Specification
Calibration/Test &
Inspection certificate
PPA Certificate of calibration
Spare set of manuals
User manual
Comms manual
C O M P A R I S O N
PPA5500
0.02%
0.03%
Specification
Black nylon with shoulder strap
Hard case with moulded lining suitable for shipping
Frequency Band
20A & 30A Shunt
10A & 30A Shunt
50A Shunt
Features
USB Memory port
Real time clock
19in Rack mount option
Other features
Speed-Harmonics/sec
Non-volatile memory
Internal data logging
Torque and speed Input
Dimensions - Excl. Feet
H x W x D (mm)
Weight
PPA1500
PPA2500/PPA2600
PPA5500
DC 〜 1MHz
—
—
—
DC 〜 2MHz
DC 〜 1MHz
—
DC 〜 2MHz
DC 〜 1MHz
○
○
—
—
—
only PPA2600
○
○
○
300
300
1,800
192kB
4
—
1GB
16(4 X 4)
○
92 x 215 x 312
192kB
4
○
125 x 355 x 250
125 x 430 x 250
130 x 400 x 315
3.3 - 4kg
5 - 6kg
5.4 - 6kg
15
Accessories
External Shunt Resistor (DC ~ 1MHz)
Model
Basic accuracy
number
HF500
0.2mΩ (±0.1%)
HF200
0.5mΩ (±0.1%)
HF100
1.0mΩ (±0.1%)
HF020
10mΩ (±0.1%)
HF006
100mΩ (±0.1%)
HF003
470mΩ (±0.1%)
Maximum current
Continuous
Peak
500Arms
5000Apk
200Arms
2000Apk
100Arms
1000Apk
20Arms
200Apk
6Arms
60Apk
3Arms
30Apk
Phase accuracy
0.1˚
0.1˚
0.05˚
0.01˚
0.001˚
0.0001˚
Probe/Clamp Current Transformer: AC
Model number
Measuring range
M3 UB 50A-1V
100mA ～ 50A
M3 U 100A-1V
1A ～ 100A
S UE 200A-1V
1A ～ 200A
S UE 250 500
1A ～ 250A/500A/1000A
1000-1V
UE UE 1000A-1V
1A ～ 1000A
SM UE 1000A-1V
0.5A ～ 1000A(1%>100A)
SM UB 1000A-1V
0.5A ～ 1000A(0.5%>10A)
/
/
/
/
/
/
kHz
kHz
kHz
kHz
kHz
kHz
Frequency range
40Hz ～ 5kHz
40Hz ～ 5kHz
40Hz ～ 5kHz
Clamp diameter
15mm×17mm
15mm×17mm
50mm ø
Category
CATIII
CATIII
CATIII
40Hz ～ 5kHz
50mm ø
CATIII
40Hz ～ 5kHz
15Hz ～ 15kHz
15Hz ～ 15kHz
43mm ø
54mm ø
54mm ø
83mm ø
(125mm×47mm or
100m m×58mm)
83mm ø
CATIII
CATIII
CATIII
P32 UE 1000A-1V
5A ～ 1000A
40Hz ～ 5kHz
P32 UE 3000A-1V
5A ～ 1000A
40Hz ～ 5kHz
Probe / Current Clamp (Hall effect): AC + DC
Model number
Measuring range
SC 3C 1000A-1V
1A ～ 1000A
P20 3C 2000A-2V
40A ～ 1000/2000A
P40 3C 4000A-2V
40A ～ 2000/4000A
P50 3C 5000A-2V
50A ～ 1000/5000A
High Performance Probes
Model
ULC Probe
ATT20 probes
ATT10 probes
TT-HV15 High Voltage
probe
External Shunt HF-003
Frequency range
DC ～ 2kHz
DC ～ 2kHz
DC ～ 2kHz
DC ～ 2kHz
Clamp diameter
59mm ø
83mm ø
83mm ø
83mm ø
Voltage range
～ 1000Vrms
—
—
Frequency range
DC ～ 2MHz
—
—
Specification
Ultra-low capacitance probe, 1000: 1, 1.5pF
20:1 HV Attenuator
10:1 HV Attenuator
15kVpk
—
TT-HVP 15HF , 1000:1
External Shunt HF-500
Current Clamp SC 3C 1000A-1V
CATIII
CATIII
Category
CATIII
CATIII
CATIII
CATIII
Current Clamp P20 3C 2000A-2V
HV Probe TT-HV15
All specifications at 23˚C ± 5˚C . These specifications are quoted in good faith but Newtons4th Ltd reserves the right to amend any specification at any time without notice
The N4L product range includes Frequency Response and Impedance Analyzers, Selective Level Meters and Laboratory Power Amplifiers
Phase Sensitive Multimeters
Applications
• Power supply phase margin and gain margin (FRA)
• Inductance, Capacitance and Resistance (LCR)
• Analysis of mechanical vibration (HARM)
PSM1735
10µHz 〜 35MHz
• Phase meter calibration (VVM)
PSM1700
10µHz 〜 1MHz
Contact your local N4L Distributor for further details
Newtons4th
Newtons4th Ltd (abbreviated to N4L) was established in 1997 to design, manufacture and support innovative electronic equipment to a
world-wide market, specialising in sophisticated test equipment particularly related to phase measurement. The company was founded on
the principle of using the latest technology and sophisticated analysis techniques in order to provide our customers with accurate, easy to
use instruments at a lower price than has been traditionally associated with these types of measurements
N4
Flexibility in our products and an attitude to providing the solutions that our customers really want has allowed us to develop many innovative functions in our
ever increasing product range
Newtons4th Ltd are ISO9001
registered, the internationally
recognised standard for
the quality management of
businesses
Distributed by:
In recognition of the technical
innovation and commercial
success of the PPA series, N4L
received the "Innovation 2010"
Queen's award for enterprise
Newtons4th Ltd
30 Loughborough Road
Mountsorrel
Loughborough
LE12 7AT
UK
Phone: +44 (0)116 230 1066
+44 (0)116 230 1061
Fax:
Email: [email protected]
www.newtons4th.com
Web:
2011 Newtons4th
ref: 526-001
(ES) Equipements Scientifiques SA - Département Réseaux sans fil - copyright
127 rue© de
Buzenval BP 26 - 92380Document
Garches
Tél. 01 47 95 99 50 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com