1
Download Quantum Hardware Reference Guide
Transcript
Intelligent/Special Purpose Specifications The following table shows the specifications for the HLI34000 high speed interrupt module. Specifications Number of Input Points 16 isolated points LEDs Active 1 ... 16 (Green) - Indicates point status Required Addressing 1 Word In Operating Voltages and Currents ON (voltage) 15 ... 30 Vdc OFF (voltage) -3 ... +5 Vdc ON (current) 2.0 ... 8.0 mA OFF (current) 0 ... 0.5 mA Absolute Maximum Input Continuous 30 Vdc Response OFF - ON 30 µs (max) ON - OFF 130 µs (max) Input Protection 30 Vdc reverse polarity Isolation Point to Point 500 Vac rms for 1 minute Point to Bus 1780 Vac rms for 1 minute Fault Detection None Bus Current Required 400 mA Power Dissipation 2.0 W + 0.30 W x the number of points on External Power Not required for this module Fusing Internal None External User discretion 840 USE 100 00 September 2002 353
