Download Head Array Control System

Head Array Control System Owner’s Manual
•
•
Operation
Time Out to Menu:
After a period of inactivity (adjustable through programming) the Omni
interface enters the “User Menu” screen. Once in the User Menu,
the head array’s directional sensors/switches are used to navigate
through the menu. The way the head array navigates the menu is
adjustable via programming. Typically, a forward command will move
the highlight to the next choice and left/right commands will adjust or
select the highlighted menu option.
Sequence using Mode Switch:
Use the mode sensor/switch to navigate through each operating
mode directly. Each activation of the mode sensor/switch will select a
new operating mode.
m WARNING!
Do not attempt to operate a power chair with a Head Array without the
assistance and training from a healthcare professional qualified for these
activities. Do not attempt to independently operate a power chair with
a Head Array until a qualified healthcare professional gives you the go
ahead.
27