Download FreeWave Technologies Multipoint Diagnostics Program User

FreeWave Technologies
900MHz, 2.4GHz, and 1.4GHz Spread Spectrum Modem
Multipoint Diagnostics Manual V 2.16D
Each entry uses a value between 0 and 255.
Radio ID = 65535 * Super byte + 256 * High byte + Low byte.
8.3.3.14 32 Diagnostics
Diagnostics
Enabled
Disabled
9
Set-up Menu setting
1 to 63
0
Diagnostics setting
1 to 63
255
Ending the session
Saving the information gathered through the session may be a good idea if it has not already
been saved previously. See paragraph 5.4 Saving Network File and paragraph 6.2 Saving Data
for further information.
When done, communication with the Master must be ended.
If the communication was directly through the serial port, close the port with the "Communication"
/ "Close Comm" menu.
If the communication was directly through an Ethernet Network (either TCP/IP or UDP/IP), close
the connection with the "Communication" / "Close TCP/UPD" menu.
LUM0003AB Rev C
61 of 63