Download Concept programavimas

Programmer’s Manual - COMMS FORMATS - Rev 4.50
Page 1
COMMS TASK FORMATS
This section provides programming information for specific Comms Task formats.
CONTENTS
Comms Formats Index ...................................................................... 1
Contact ID Mapping ......................................................................... 2
Contact ID Input Point Mapping Summary Tables .......................... 4
Dialer Attempts and Dial Holdoff Times ......................................... 6
Comms Format
Introduced
Section Number Index
Monitor
Answer Call
PC Direct
IRfast Dialer
Contact ID Dialer
EMS
EarthNet Direct Line
Securitel
Printer
External Modem
Inet
Accept
Poll Data
PACOM
IRfast Backup Dialer
CID Backup Dialer
GSM
SpreadNet Wireless Interface
4+2 Pulse Dialer
Geoquip
8 Pin
C-Bus Serial Interface
Inovonics Wireless Interface
PosData DVR
Dynalite
V1
V1
V1
V1
V1
V3
V1
V1
V1
V1
V3.5
V2
V3
V3
V1
V1
V3.5
V2
V3
Under development
V4.5
V4
V4
V4.5
V4.5
Comms- 1
Comms- 2
Comms- 3
Comms- 4 *
Comms- 5 *
Comms- 6
Comms- 7 *
Comms- 8
Comms- 9
Comms-10
Comms-11 *
Comms-12
Comms-13 *
Comms-14
Comms-15 *
Comms-16 *
Comms-17 *
Comms-18
Comms-19
Comms-21
Comms-22
Comms-23
Comms-24
Comms-25
Comms-26
* IMPORTANT NOTE:
Please refer to Pages 3 and 4 for information on Contact ID Input Mapping, relevant to programming options
in the following Comms Tasks formats:
-IRfast Dialer
-Contact ID Dialer
-EarthNet Direct Line
-Inet
-Poll Data
-IRfast Backup Dialer
-CID Backup Dialer
-GSM
Comms- 4
Comms- 5
Comms- 7
Comms-11
Comms-13
Comms-15
Comms-16
Comms-17
Copyright exists on this manual. Unauthorised copying of this document is prohibited.