Download Ports and operating elements

System expansions
► If you no longer need the EasyChange rails, secure them again at their location in the drive cage.
► Fit the casing cover back onto the casing (see Chapter "Reattaching the casing cover.", Page 39).
It may be necessary to modify the entry for the drive in the BIOS Setup.
Installing and removing boards
Depending on the device variant, your device will be equipped to accept either
high-profile boards or low-profile boards.
Installing and removing high-profile boards
(device-dependent)
You can install additional modules in order to increase the performance of your machine.
The number, position and arrangement of the board slots on the mainboard can be found in
the manual for the mainboard. Boards may already be installed on shipment.
Board,
A slot cover is provided for every slot. If no board is installed, the slot cover
must be used to protect the slot.
When you install a board, do not discard the corresponding slot cover.
For cooling, protection against fire and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover if you remove the board.
Fujitsu Technology Solutions
53