Download PRESYNCHRO Tutorial/Reference Manual

ACTUATIONS
ACTUATIONS
ACTUATIONS
12*<Actuated Movement>
Defaults:
Menus/Groups:
12*NO
[PARAMETERS] [INTERSECTION]
The purpose of this command is to enter the type of phase module present, actuated or nonactuated, for each movement of the current intersection.
<Actuated Movement> is a keyword describing whether or not the movement is part of an
actuated phase, as described below:
NO
YES
the movement is not part of an actuated phase (default).
the movement is part of an actuated phase.
Notes
•
Specifying YES for all non-zero lane groups indicates a fully actuated signal.
Specifying NO for all non-zero lane groups indicates a pretimed signal.
Specifying YES for some, but not all, non-zero lane groups indicates a
semiactuated signal.
PRESYNCHRO
B-65
Reference