Download CERTIFICATION REFERENCE CERTIFICATION

Certification reference
"Heat Pump" NF mark
NF 414 Rev 8
33/42
CERTIFICATION FILES
The application for the right to use the NF Mark must be drawn up in one hard copy, and one electronic
copy, addressed to EUROVENT CERTITA in accordance with the templates defined below in French or
English.
If the product comes from a manufacturing unit outside the European Economic Area, the applicant will
appoint an authorised agent within the European Economic Area who jointly signs the application.
An application concerning a product availing of a foreign conformity mark or a test certificate issued by a
foreign laboratory is processed according to existing recognition agreements, in accordance with the
general rules of the NF Mark.
A copy of the conformity certificate/declaration to European directives must be attached to each
application.
Electronic versions of letter templates and data sheets may be obtained from EUROVENT CERTITA.
8.1
“APPLICATION FILE” CHECKLIST
CHECKLIST
Documents to be provided
Application for the right of use according:
• Standard letter 1 in case of application for the right of use or subsequent admission application
• Standard letter 2 in case of application for extension of the right of use
• Standard letter 3A filled in by the applicant/holder joined with the visa of the distributor (if
relevant) and 3B, if the latter is not the applicant/holder of the right to use the NF mark, in case of
a maintenance application
General data sheet regarding the applicant and the stakeholders according to the standard sheet 1
Commitment sheet according to standard sheet 3 In case of subcontracting (as defined in §1.2), in case of
an admission or extension application
in case of an admission or extension application
Commitment sheet according to standard sheet 4, in case of authorised agent (as defined in §1.2.2)
Declaration of product conformity to the European directives and regulations which are applicable
according to standard sheet 5
in case of an admission or extension application
Wiring diagram in case of an admission or extension application
Specification plate: in original or copy format which must features the NF logo marking draft. For splits
and multisplits, that of the outdoor and indoor units
in case of an admission or extension application
Installation and user’s manual in French
Distributor’s commercial documentation
in case of a maintenance application
Technical data sheet according to standard sheet 2
in case of an admission or extension application
Test reports, original, in Franech and/or English
Note: Each test report is preferably accompanied by a synthesis examination report
1 report for every 5 models of the range (cf. §3.2.3.2)
8.2
SHEETS AND LETTERS MODELS
No. of
copy
1
1
1
1
1
1
1
1
1
1
x