Download U602L AT Command Reference Guide

AT$NWBAND
Command
AT$NWBAND
Command Function
Reads the band preference. The band preference returned is read from NV
item’s NV_BAND_PREF_I and NV_BAND_PREF_16_31_I
Query Syntax
AT$NWBAND=?
Query Response
<band> bit definitions
Write Syntax
=<band_pref>
Write Response
Read Syntax
AT$NWBAND?
Read Response
4e80187
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
— <band_pref>
This is a 32-bit hexadecimal value that has the bits set for each band that needs to
be enabled. Refer to the query operation for the meaning of each bit.
U620L AT Command Reference Guide
10