Download User Manual

HP_RG_319955-001.book Page 11 Thursday, April 3, 2003 11:23 AM
Reference Information
FAX Class 1
Command
(Conexant)
+FAE=n
Data/fax auto answer: 0=disable (default), 1=enable.
+FAR=n
0=disable adaptive reception (default), 1=enable.
+FCL=n
Set loss-of-carrier delay in units of 100 ms (n=0 to 255).
+FCLASS=n
Set active service class: 0=data mode (default), 1=Fax Class 1,
1.0=Fax Class 1.0 mode, 8=voice mode.
+FIT=n,a
Set DTE inactivity timeout n seconds after which modem goes
on-hook (a=0) or DCE goes on hook (a=1).
+FLO=a
Set flow control type: 0=XON/XOFF and RTS/CTS flow control
turned off; 1=XON/XOFF flow control in either direction; 2=RTS
for flow control of modem by DTE, and CTS for flow control of
DTE by modem.
+FMI
Report modem manufacturer.
+FMM
Report modem model.
+FMR
Report modem version, revision, or date.
+FPR=n
Set DTE/modem interface rate in bits/sec: 0=automatic
detection (default).
+FRH=n
Receive data with HDLC framing.
+FRM=n
Receive data.
+FRS=n
Receive silence, n ×10 ms.
+FTH=n
Transmit data with HDLC framing.
+FTM=n
Transmit data.
+FTS=n
Stop transmission and wait, n ×10 ms.
Reference Guide
7–11