Download User Manual - Quevo Audio
Transcript
User Manual PLEASE READ BEFORE USE Thank you for choosing our Wireless Sport Earphones.This manual will guide you through everything to get up and running! Please read through the manual before using the earphones. 1. Keep the earphones away from sharp edges, uneven surfaces, metal components and anything else which could damage your earphones. 2. Do not modify, repair or disassemble your earphones without professional instruction. 3. Do not clean your earphones with corrosive or volatile liquids. 4. Do not use your earphones in a hazardous environment. 5. Keep the product, accessories, and packaging parts out of reach of children and pets to prevent accidents and choking hazards. Inside the Box IMPORTANT SAFTEY INFORMATION Do not use your earphones at high volume levels. Listening to loud sounds for an extended period of time may cause hearing loss. Do not wear your earphones whilst driving or in any activity that could bring you near moving vehicles. Begin with earphones powered off. Then Hold down “ ” button (for about 5 seconds) your earphones will then enter pairing mode, and you will hear the voice command say “Pairing”. The “ ” logo will also flash red and blue. After the first successful pairing your earphones will connect with your device automatically every time. Please turn on the Bluetooth function on your device, then look for QUEVO – QA18 and connect. If your device tells you to enter a password please enter ”0000” as the pairing code. Included are S/M/L secure fit ear hooks and ear buds. The correct size ear hooks for your ear will be the ones which fit snugly into the bowl of your ear and lock into the top. Make sure to test out all sizes of ear hooks, only with the perfect size will you enjoy the best fit & optimum sound quality. Charge the earphones via USB cable, the " " will turn red whilst earphones are charging. The " " will turn blue once fully charged. Power on: Hold down the “ ” button for 3 seconds to turn on your earphones, the voice command will say “Power ON” and the “ ” will flash blue slowly. Enter the pairing mode: Hold down the “ ” button to turn on your earphones and keep holding the button down for another 5 seconds until you hear the voice command say “pairing”. The “ ” will then flash red and blue. Increase Volume: Press “+” button. Decrease Volume: Press “-“ button. Power off: Hold down the “ ” button for 3 seconds until you hear the voice command say “Power OFF”. Low battery warning: “ ” will flash red and the voice command will say “Battery Low”. Charging: Charge the earphones via USB Cable, the “ ” will turn red whilst earphones are charging. Answer telephone call: Press the “ ” button to answer telephone call. End telephone call: Press the “ ” button to end telephone call. Reject call: Double press the “ ” button to reject a telephone call. Call back last caller: Double press the “ ” button to call back last caller. Pause Music: Press the “ ” button to pause music. WARNING Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution with regard to inserting objects into ear canal, use at own risk. ATTENTION: These earphones conforms to a water-seal rating of IPX4, which ensures the earphones will show no adverse damage even if exposed to water splashing from any direction.