Download IllumiRay User Manual (98 Kb PDF Format)
Transcript
IllumiRay Solid-State Mini Light User Manual Description The IllumiRay uses solid-state electronics to provide a superior light. The IllumiRay will never heat up or burn out. It draws minimal current and runs on 12 volts. Parts List : 1- IllumiRay Solid-State Mini Light Installation and Use The IllumiRay receives power through a standard 3.5mm audio cable. Plug the IllumiRay into a jack that will output +12 volts to the tip of the 3.5mm audio cable.* Secure the IllumiRay to a safe place and neatly arrange all wiring to ensure safety and a clean look. *(see Related Products below for power and switching options) Technical Specifications Input Voltage: 12 volts DC Maximum Current: .065 amps Service There are no serviceable parts on the IllumiRay. Please contact Richardson Products Inc. about any problems. Related Products product # 060791 060713 06079W 06079R description Black Jack Switch NI-CD Battery Pack IllumiRay- White IllumiRay- Red Warranty and Disclaimer Richardson Products Inc. warrants that the IllumiRay Solid-State Mini Light shall be free from defects of workmanship and materials and will perform in accordance with the product specifications for a period of one (1) year from the date of sale by Richardson Products Inc. to the dealer. If the product fails to perform in accordance with the product specifications, Richardson Products Inc. will repair or replace, at its discretion, the defective material or part. This warranty does not cover damage caused by accident, misuse, abuse, alteration and other defects not related to material or workmanship. Richardson Products Inc disclaims all liability for economic loss, loss of profits, overhead or consequential damages which may be claimed to arise from any sale or use of this product. 9408 Gulfstream Road Frankfort, Illinois 60423 Website: www.RichardsonProducts.com Email Address: [email protected] Phone: 815.464.3575 Fax: 815.464.3576 IllumiRay Solid-State Mini Light User Manual Description The IllumiRay uses solid-state electronics to provide a superior light. The IllumiRay will never heat up or burn out. It draws minimal current and runs on 12 volts. Parts List : 1- IllumiRay Solid-State Mini Light Installation and Use The IllumiRay receives power through a standard 3.5mm audio cable. Plug the IllumiRay into a jack that will output +12 volts to the tip of the 3.5mm audio cable.* Secure the IllumiRay to a safe place and neatly arrange all wiring to ensure safety and a clean look. *(see Related Products below for power and switching options) Technical Specifications Input Voltage: 12 volts DC Maximum Current: .065 amps Service There are no serviceable parts on the IllumiRay. Please contact Richardson Products Inc. about any problems. Related Products product # 060791 060713 06079W 06079R description Black Jack Switch NI-CD Battery Pack IllumiRay- White IllumiRay- Red Warranty and Disclaimer Richardson Products Inc. warrants that the IllumiRay Solid-State Mini Light shall be free from defects of workmanship and materials and will perform in accordance with the product specifications for a period of one (1) year from the date of sale by Richardson Products Inc. to the dealer. If the product fails to perform in accordance with the product specifications, Richardson Products Inc. will repair or replace, at its discretion, the defective material or part. This warranty does not cover damage caused by accident, misuse, abuse, alteration and other defects not related to material or workmanship. Richardson Products Inc disclaims all liability for economic loss, loss of profits, overhead or consequential damages which may be claimed to arise from any sale or use of this product. 9408 Gulfstream Road Frankfort, Illinois 60423 Website: www.RichardsonProducts.com Email Address: [email protected] Phone: 815.464.3575 Fax: 815.464.3576