Download AT-6 User Manual.CDR

Item No.: F3401(Yellow)
Item No.: F3402(Gray)
WINGSPAN : 1450mm (57-1/16")
Instruction Manual
The manual suit for every color scheme of Freewing AT-6 Texan.
The manual only choose one color scheme as an example.
The manual is only for reference. All is according to the actual product .We can't note if any
improvement or upgrade.
Spareparts support , please visit www.sz-freewing.com to search.
Version No.: F3401-V01
MADE IN CHINA
Catalogue
1
5
11
12
13
Product Introduction
Assemble Instruction
Center of Gravity
Assemble Structure
Motor Specification
3
5
11
12
13
Thanks very much for your purchasing our Freewing “AT-6 Texan”, it use the EPO material
and add parts of carbon material to ensure its strength structure.We have spent a lot of
energy, under the premise of make sure the flight performance, we try the best to do it close
to the real plane. We hope that you have many pleasant flight with your AT-6 Texan.
Its structural design is very reasonable, you can finish its install very quickly. Install main
wing and tail wing is extremely simple.Only take several minutes,you can complete its
assemble. Please read the assembly manual carefully to familiarize you with all the steps
before starting.
The following is our basic specification.
Specification
Material
EPO
970mm (38-1/8")
Fuselage length
Wingspan
1450mm (57-1/16")
Flight weight
1950g (68.78 oz.)
Pull
2550g (89.94 oz.)
Motor size
Prop size
Battery
ESC
Servo
Landing gear
3648-650KV
2-Bladed 14*7
4S 14.8V 2200mAh 20C
40A ESC
9g servo (4pcs)
17g servo (1pcs)
Metal Scale Electric Retract
Aileron
YES
Elevator
YES
Rudder
YES
Throttle
YES
Flap
YES(Do it by yourself)
According to different demands, we provide RTF, ARF(no transmitter, receiver ,battery and
charger),Airframe only, the three equipment for your choose. Please refer to the following
list to take an inventory and make sure it is complete.
Note:1.Picture use ARF version for your reference.
2. refer to RTF version
refer to ARF version
refer to Airframe version
EPO Foam Fuselage
Motor
ESC
Servo
Battery
Charger
Spare Parts Bag
Manual
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-1-
Version No.: F3401-V01
: F3401-V01
Accessory Bag Content List
(RTF\ARF)
( Airframe Only )
Spare Parts Bag
Spare Parts Bag 1
No.
Name
Specification
Qty.
No.
Name
Specification
Qty.
1
Screw Driver
/
1
1
Screw Driver
/
1
2
Screw
PM4*50mm
2
2
Screw
PM4*50mm
2
3
Screw
PM4*35mm
2
3
Screw
PM4*35mm
2
1
4
Screw
PA3*42mm
1
1
5
Screw
PA3*35mm
1
2
6
Screw
PT1.7*20mm
2
2
7
Screw
PA3*10mm
4
Clips
4
Screw
PA3*42mm
5
Screw
6
Screw
7
Clips
8
Y Wire
L=100mm
2
8
9
Main Wing fixing
plastic part
1
9
Y Wire
L=100mm
3
1
10
Main Wing fixing
plastic part
1
11
1
1
12
Air Inlet
/
/
/
1
Tail Wing fixing
plastic part
13
Velcro
20*60mm
1
14
Metal Wire
L=41.5mm
2
PA3*35mm
PT1.7*20mm
1.2mm
11
Air Inlet
/
/
/
12
Velcro
20*60mm
10
Tail Wing fixing
plastic part
1.2mm
2
1
Spare Parts Bag 2
No.
Name
Specification
Qty.
1
Propeller
2-Bladed 14*7
1
Note:
1.This is not a toy .It is for experienced modelers only. You are responsible for the safeoperation
of this model and any damage of harm it may cause.
2.Before flying the AT-6 Texan for the first time .Please read through the instructions
carefully and make sure that your radio equipment is working properly and has been range
tested prior to flight.
3.Young people under the age of 14 should only be permitted to operate this model under the
instruction and supervision of and adult with modeling experience.
4.Please keep these instructions for future reference after completing model assembly.They
contain information critical to the safe operation of this model.
5.If you have any further questions regarding the safe operation of you RC model.pleasecontact
your local hobby shop .flying club or Freewing Model for professional help and advice.
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-2-
Version No.: F3401-V01
: F3401-V01
hijk]lm" AT-6 Texan "， !EPO"#$%，'(*+./"#;<* =,>
? @A BC=D.FGHIBJKCLM，N@A<OPCQRS,MTUVW X
Y C 。[\]P^_`“a”，bcd <Cef！
Cuvhiwy、{|}D~。€、‚Cƒ`„…i†‡。ˆˆ‰ Š H
I ]‹ ?ŒC(，‘|}Cƒ。 USb，’]“XC”•、b–—]˜™Cš ›
B œ 。
S ž C Ÿ ¡ :
çè
"#
ÄÅD
EPO
970mm (38-1/8")
Æ
1450mm (57-1/16")
ÇÈ
1950g (68.78 oz.)
ÉM
2550g (89.94 oz.)
ÊË
3648-650KV
ÌÍÊË
2-Bladed 14*7
¯
Ö
Î
ÇÏÐ
4S 14.8V 2200mAh 20C
40A ESC
9g servo (4pcs)
17g servo (1pcs)
Metal Scale Electric Retract
с
YES
҂
YES
¶Ó
YES
ÔÕ
YES
í î $
YES (é ê ¥ µ、ë<ì)
¢ £ ¤ ¥ ¦ I § ¨ ' C ‰ T ， F G ?©Rª{、ARF(¨«¬­、U®、¯、>°)、
± ² ³ ¨ ' C´ µ ¶ ·  ª K ¸ ¹ º 。’»S¼½´µ½‡›¾b¿ÀC|{O。
ã ：1 . ¾ !ARF´ µ å æ ».
2.
à á â ARF ´ µ
àáâ { ´ µ
àáâ±´µ
EPOÚ Û Ä Ü Ý
Ö
Î
¯
>°
ÞÝß
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-3-
Version No.: F3401-V01
: F3401-V01
ïÝßðñ¼â
ï Ý ß({ 、ARF )
ïÝß(±)
ÞÝß
ÞÝß 1
È
ç è
È
1
ò÷ø
/
1
1
ò÷ø
/
1
2
ò÷
PM4*50mm
2
2
ò÷
PM4*50mm
2
3
ò÷
PM4*35mm
2
3
ò÷
PM4*35mm
2
4
ò÷
PA3*42mm
1
4
ò÷
PA3*42mm
1
1
5
ò÷
PA3*35mm
1
2
6
ò÷
PT1.7*20mm
2
2
7
ò÷
PA3*10mm
4
L=100mm
2
8
ö#üý
1
9
Yþ
L=100mm
3
1
10
€ôõö#Ý
1
1
11
‚ôõö#Ý
1
1
12
; ÿ Ý
/
/
/
13
ùúû
20*60mm
1
14
€  Î ÷
L=41.5mm
2
ç
è
5
ò÷
6
ò÷
7
ö#üý
8
Yþ
9
€ôõö#Ý
10
‚ôõö#Ý
11
;ÿÝ
/
/
/
12
ùúû
20*60mm
PA3*35mm
PT1.7*20mm
1.2mm
1.2mm
2
1
ÞÝß 2
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-4-
ç è
È
1
òóÌ
2Í Ì 14*7
1
Version No.: F3401-V01
: F3401-V01
Install
Note:
1.When install, please read the manual carefully. if you have any questions, kindly contact with your distributor,
or contact us on [email protected]
2.Before install, please refer to P12 ,check the screw position.
3.Spareparts support , please visit www.sz-freewing.com to search.
R：
1． ` „ ， ’ À ， ， ‘  ] l m C ， § F G [email protected] b T 。
2. ` „ ,’ » !12",# $ ò ÷ ˜ ™ C % ! ¥ µ 。
3. ´ Ý 9 : ， ’ ; < F G C = >www . sz - f r e e w in g . c o m; < # ?.
-Prepare to install main wing as the right
photo shown.
-& ' ,( )š € .
-Insert the stainless tube into one wing.
-* ¨+ , - + . Ÿ / € .
-Insert the another side of stainless tube into
another wing.
-Use one Y-wire to connect left/right main
wing servo wire. Use another Y-wire to
connect left/right main landing gear wire.
-¨ + , 0 1Ÿ/ - +0 1 Ÿ2 €  。
-!3 ¢" Y”?©4 U 5 &€  6 Ç Ï Ð、с
Î 。
-Press on the left & right main wing.
-7 8 5 、 & €  。
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-5-
Version No.: F3401-V01
: F3401-V01
-Remove the canopy from fuselage.
-@ Ä A BS C D E。
-Press the fuselage on the main wing.
-* ÄF N €  A¶ 。
-Switch on the transmitter, connect throttle
channel and landing gear channel and power
on.
-G H¬ ­ 、 4 U Ô Õ _I JÇ Ï Ð _I ，K
4 U L。
-As the right photo shown, put down the main
landing gear.
-& ' ， MS € Ç Ï Ð 。
-Keep the “put down landing” condition and
power off.
-@ :Q Ç Ï Ð M SN O 。P Q J ¬ ­
L。
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-6-
Version No.: F3401-V01
: F3401-V01
-Turn over the fuslage, press on the main wing
fixing plastic parts.
-RS Ä ，F+ € T ô ö # Ý 。
-Fixed the main wing on the fuselage by
screws.
-! ò ÷* € ô õ N ÄA 。
-Apply the glue to the indicated position.
-N& ' U V， W X Y Z [ \。
-Glue on the inlet decorate plastic parts.
-] A ö # ; ÿI Ý 。
-As the right photo shown, prepare to install
tail wing set.
- & ' 。 ( ) ^ _# ， ( ) š ‚ 。
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-7-
Version No.: F3401-V01
: F3401-V01
-Install elevator
-š Ò ‚.
-Fixed the elevator by screws.
-!ò ÷ ô õ ҂ 。
-As the right photo shown, install rudder.
-& ' 。 š ` a‚  。
-Turn over fuselage, press on the rudder
fixing plastic parts.
-R S Ä ，F + ` ‚ ô õ ö # Ý 。
-Screw tightly to fix rudder.
-b Tò ÷ b ô õ` ‚.
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-8-
Version No.: F3401-V01
: F3401-V01
-Through the plastic chuck to adjust the rod
length, make sure the wing surface is in the
center, then fasten the plastic chuck.
-_` ÷d e C ö # ü ý ， Öh j kÅ l。
N @ A n p C q t S ，F T ö # ü ý。
-As the right photo shown, the elevator is in
the center.
-&'Ò ‚ Î n u Wp N O.
-As the right photo shown, the rudder is in the
center.
-&'`‚ Î n u Wp N O.
-As the right photo shown, the aileron is in the
center.
-&'€  Î n u Wp N O.
-Stick the velcro on the battery to fix it.
PS: the battery range we advise is as following:
4S 2200mAh ~ 4S 3500mAh
-! ù ú û û N ¯. Ÿ n。 ! b ô õ ¯。
Ps： F G v x y ! C ¯ { | S ：
4S 2200mAh ~ 4S 3500mAh
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-9-
Version No.: F3401-V01
: F3401-V01
- How to put electric parts in battery cabin ,please
refer to the right photo.
-¯ D ð 6 Ý} M ¥ µ ’ »& 。
Flap Modification Instructions
We increased the possibility of flap modification. We reserved the servo install position and also prepared the
modify materials (include control wire/plastic arm/ screws). If you need, you can use our parts to increase the
flap function.
íì
F G æ ¾ * B ì í  C ‘ P O 。 é ê í  Î š ¥ µ 、 ' ( ´)B ì '‰ Š C " #（ î $ ÷ 、
Î n ‡ À J '‰ Š C ò ÷ ）.  ] ‰ Š ， ’ y ! F G R ª C ´ Ý æ ] C ¾ * í  。
Preflight
After check everything before flight, as a beginner, we should pay attention of following issues, to make sure our
flight is successful.
1. When use radio set, make sure switch on the transmitter power firstly, then power on the receiver.
2. Before flight, under power on condition, push up and down the throttle and check the motor/ESC work well.
3. Before flight, check well the plane's center of gravity. Correct CG is the key factor of successful flight. Please
refer to P11 to check the center of gravity.
4. No matter take-off on the road or hand launch, we must upwind to take off.
5. After take off, if any unusual flight or hard to control, we should pull high the plane, then trim to adjust according
to the actual situation to maintain it level flight.
6. When the transmitter alarm, you must end your flight as soon as possible and operate to its landing, to avoid
the radio will be out of control since of low voltage.
7. If any damage in flight, please purchase the spareparts from your distributor or refer to www.sz-freewing.com
to check.
< ã~  €
F G %  N < Q J < ã~ Sn Ÿ ‚。 ƒ， „ yF G C <… * } †。
1、 N ˜ i y ! ‡î u ) ( ， ˆ ‰ @ A Š G H¬ ­ L， ‹ Œ  *U ® _ 。
2 . N < Q,_ N O S,% Ž  A 、 S É  Ô Õ,‘d ’ “ ”6 Ö • ° C– % N Ož — ^。
3. < Q,ˆ ‰ ™ “ C ¥ µ.˜ ™ C ¥ µ ž˜ ™} † <P š › œ.’ »P 1 1b ™ “ C ¥ µ.
4、 ¨ , ž ¹ º  ž Ç § ž Ÿ Ç ， F G ¡ %  ¢ £Ç 。
5、 Ç Œ ， ¬ ¤ < ¥ O … i ¦  î $ ( ， F G% § ¨Èj  ，‹ Œ¢ £ C Y© q t， Ö {
C ªÖ H P 。 y ‘  @ : Ò 。
6、§ ¬ ­ ¬ « ¬ ­ ® Œ ， % ¨ ¯ ° <,± ² ³ <， ´ µ ¶ · ¸} ‡ î u) ¹ î 。
7、 N < ` „ , ¬º » ¼,’ ] C l m ´ Ý.’ » F G C= ½: w w w . s z - f re e w i n g . c o m# ? 。
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-10-
Version No.: F3401-V01
: F3401-V01
Center of Gravity
Check the aircraft center of gravity ,wrong center of gravity will lead to failure fly.
(Please refer to the following photo to check CG.)
FGN<Q‰ Š ™ “ C ¥ µ， ÃÄC¥µ‘P „ —Å]C< ¹Æ。
(’»S¼¾ ' Ç C ¥ b Ö {C。)
CG: 70 ~ 80 mm
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-11-
Version No.: F3401-V01
: F3401-V01
AT-6 Texan Assemble Photo
“AT - 6 Texan” œ
Screw
PM 4*35mm
Screw
PM 4*50mm
Main Wing fixing
plastic part(Front)
Main Wing fixing
plastic part
Electric Retract
Landing Gear
Air Inlet
Screw
PWA 3*12mm
Screw
PA 3*40mm
Screw
FA 2.2*22mm
Rear Wheel Set
Screw
PA 3*35mm
Motor
3648-650KV
Screw PA3*10mm
Spinner
Screw
PA3*15mm
Scale heat sink
Propeller
14*7E
AT-6 Texan
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-12-
Version No.: F3401-V01
: F3401-V01
Motor Specification
∅3
.2
m
m
M8.0mm
m
36.5mm
m
.5
50
mm
3.2
4- ∅
3.0mm
61.5mm
Model
3648-650
AT-6 Texan
KV Value
650RPM/V
YELLOW
BLACK
RED
Volate
( V)
Current
( A)
Pull
( g)
RPM
Weight
( g)
G/A
No Load
Current
Prop
ESC
14.8
31
2500
----
198
53.3
1.7
1407
36A
Item No.: F3401(Yellow) ; F3402(Gray)
: F3401() ; F3402( )
-13-
Version No.: F3401-V01
: F3401-V01
Have Fun!
We hope that you have many pleasant
flights with your AT-6 Texan !
Shenzhen Freewing Model Co.,Ltd
HK Freewing Model International Limited
Add.: FeiYi Building,face to Labor Bureau, Fumin Middle Road, Dalang Town,
Dongguan City，Guangdong Province, China
Web: http://www.sz-freewing.com
Email:[email protected]
Tel: 86-769-82669669
Fax:86-769-82033233