Download 4140XMPT Installation Instructions

Previous Menu
VISTA
SERIES
PARTITIONED SECURITY SYSTEM
4140XMPT
INSTALLATION
INSTRUCTIONS
Meuv2m2
237
CONGRATULATIONS
on your purchase of the VISTA 4140XMPT!
The purpose of these Installation Instructions is to give you a brief overview of
the VISTA 4140XMPT system, and provide instructions for installing a basic
system.
As always, ADEMCO is there for YOU! Our SALES and TECHNICAL
SUPPORT sti are eager to assist you in any way they can, so don’t hesitate
to call, for any reason!
East Coast Technical Support: 1-800-645-7492 (8 a.m. -6p.m. E.S.T.)
West Coast Technical Support: 1-800-458-9469 (8 a.m.-5 p.m. P. S.T.)
PLEJWE,
Before you call Technical Support, be sure you have:
Checked all wiring comections.
● Determined
that the power supply and/or backup battery are
supplying proper voltages.
s Verified your programming information where applicable.
● Noted the proper model number of this product, and the version level
Gfknown)
along with any documentation that came with the product.
● Noted your Ademco customer number and.lorcompany name.
Having this information handy will make it easier for us to serve you
quickly and effectively.
●
Again, CONGRATUMTIONS,
-2-
and WELCOME ABOARD!
—.—.
TABLE
1.
Il.
— ——
OF
GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . .
lNTRODLfCTtONTO THE CONTROL............................. ~
suMAARYoF41~SY51’EMmnmEs
............. 5
mmowcnm
TO P~ED
SYSTEMS............... 6
Suit Psr6tkmii Futures .................................... 6
~
of pu6fii
........................................ 6
Global PmWoningFosmms6 Rasw-s .................. 6
~
Spsoi6cF~
..................................... 6
v.
Powot%?Q
Addidon,l C@lsobs..,”
.... ........................ t2
FlustIMounAng
WhTrkn Ring10t(51~
............. ti
A@sting ms AlphsCorlsdsvi
Angls...............l2
EXTERM4L=NDE%
........................................... *
............................................ 13
............................................ 13
UL lnsMation8 ................................................... W
-*
~
........................................... 13
Sh6xJy
.............................................. 13
............................................................... 13
Zonoc 2-8 ........................................................... u
.................................
rl%-~y~
.................. ............. :
...................................... a
MrslsssSmok@~
PASSIVE INFRARED DETECTORS.... ..... ...... .. ........ 13
GSREAKDETEC_
.................................... $4
P~UNECU4NE~
....................................M
cOOJOJTORXI~ER
OUTPUTS...................... .. M
............................................. M
Grwsrdsmrt.
............................................ M
Rmnots K9yswitdl (4146)...................................... ~
~
Consds soundsroP9m40n........................l5
........... . ... ....... W
CONNECTOR J6 INPUTS&~LfTS
s
EventLoggingPhnK Como@om
-~
~::::::::::::::::::::*
21~Ul;~N:
& POWERING .............. ...........ll.
............................................................
Moudf9u@ts41~m
Sad.. ........................ 17
~WG~2ailtlaaMlat
.................................... g
........................................
Primary Powor..................................................... m
Su&up .
................................................... *
.................................... :
....................................
............................................
...................... :
................. 16
.................... .. ....... 10
sEclJmYAccEs CmEs ..................................... s
...................................................... a
Dmplsy a Print Modes......................................
x
Closr Event @ ................................................... ~
V1.
PERIPHERAL DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . .11
REMOTEcONmLEs .............................................. 11
5137AD ~sdls
A@hs LCD Cor?sds................. 11
. m Calsdn ....................................11
..................................................11
9%$s2ss
..............................11
surtsos
Moun6ng610calsdos
......................... 11
hsubl,
Consola DIP ~
~pERA7,0N
User CodDs& LO* of AuttKwy............ ............... s
hkdbpkPsnibwIw
(GOTOFtmo60n)...............t9
Instsuor m
...................................................... a
Master/Msnsgor Cocos...................................... 2f
Ooomtor C*s ................................................... 21
Dboss ~...:
................................................... %
~~G~lEL-TIME
CLOCK-... .......................2I
..............................................
Arming Fm@aC ................................................. :
Psrtnion-m7u
Commands.................................. z
vii Cspsbiutin of ● User..................................... z
vi
Dwnbs&4Msssagm ..............................z
using6rsSuiit-h User%Guids............................... a
Displaying Dosoriptorx.......................................... 2
z
...........................................
A%tiwctitiitis
.......................' ..........'.... 33
%klJti~
................................................ a
...................................................... a
Other Trwbb conditions...................................... 33
PRmEDuREs..............................a
EVENTmNG
......................................................... @
Houso l~ntifmtin .............................................. 9
Tmnsmittor ldsntifiosfb. ....................................... 9
Sdftsrtim
D@mrrnins
Houso10......................... 9
Ctrodrhg TmnsmitmrHwso IDs.............................. 9
GoNo * T@stM.... ......................................... e
=ti~tiNdiOS
....................................... :
...............................................
Wxdossbns Typos............................................ 10
Adti80tis .......................................................... lD
Wxss
Dwioos................................................. 10
Iv.
-.——--——
ZONE CONFIGURATtONS . . . . . . . . . . . . . . . .. . . . . . . . . . 7
ZONE IVPE DEFINlmONS......................................... 7
SAStc9 mwiREDzaES
................................... 7
Zono l ................................................................ 7
zon@ 9................................................................ 7
Zonoc 24 ............................................................ 7
2-WIWOJNG
LOOP (thtf@ibSX
LooP)...................... :
...........................................................
Pollinglaop Dwioss............................................. 8
WIRELESS EXPANSION ........................................... 9
=4RF Rowiwrs .....................................
DO* .................. .
-ting
m- *W*=
wmti
Ill,
--
CON:Y:IHJS
V1l.
SYSTEM COMMUNICA~ONS . . . . . . . . . . . . . . . . . . . . 25
—
SpwDud Rspming............................................. z
A&moo Low sposd.............................................. :
.............................................
SEscmmdma
4+2 ~Wtig
...................................................... 3
4+2 Expms8....................................................... s
~,i3!JllJl&$01qRsPor@
............................... g
............................................
Tabbof CataotlDEwrrt
Cdos ............................ s
. .
~
m........................=
PROGRAMMING THE SYSTEM ................... 27
GENERALPROGRMMNG PROCEDURES
................. z
Commdosbon DsfwH Progmmmin3
....................... D
UssrFIWK3yZons,Dsvios& AlphsProgmmmkq....... 27
Programming SbpS.............................................. 27
COMMUNiCA~ P~NG
...........................a
................................................. a
a~
‘ brIFti
................... a
=Y~
~
w
~ -~
@ p................... .
.................................
.................................... B
.......................................... a
.................................................... a
arwh@mrmhg ............................................... a
............................................. m
.............................................. 3t
EnmrklgZons Dsso@@m..................................... 3f
m
Cus&rl Wds ..... .................................... 3t
cm8ting Pardbn Doson@m................................. 31
Cmdnga ~
Msssqs .................................. S!
V~d~
In Msmofy............................. a
Vlll.
lx.
DOWNLOADING PRIMER . . . . . . . . . . . . . . . . . . . . . . . . 33
nsmfoci THE SYSTEN. . .. . . .. .. . . . . .. . . . . . . . .. . . 34
tJsinQTest Mods.................................................. a
SysWm Test.............................................. 3t
Tming ti ~
-B
AmUser........... ............ x
uLfNSTALLATtoNREWWEMENTS.............. ............ a
x.
. . . . .. . .. . . . . . . . ... . . . . . . . .. . . 35
T-ESHOOTING
...........................................................
HARD-WIRED
ZoNEs 1+ ......................................... :
................................................................... 3
WRELESS............................................................ s
................................................ 9
CaAuncAmats
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 38
xl.
X11. 41sOWH OPERATION k WIRING . . . . . . . . . . . . . . . . 30
DtP SWITCH S-G
TABLES . . . . . . . . . . . . . . . . . 40
PROGRAMMING
FORM ... ....... ......... .. ....... 43
tNDExTo PRDGmMFIELm ....................... ............47
-3”
LIST OF FIGURES
3.
SYSTEM .. .... .................... ....................... ......................... .. .......... .... .. .. .. ............. .. ..5
ADDRESSABLE
CONSOLE WfTH DIP SWITCH ............................................................................. 11
SURFACE MOUNTING THE CONSOLES ... .... .................. ........... ...... ...... .. .. .... ... .. .......... ............ .. .11
4.
POWERING
i5.
FLUSH MOUNTING
1.
2.
PARTITIONED
ADDITIONAL
6.
ADJUSTING
7.
CONNECTOR
0.
GROUND
9.
REMOTE KEYSWITCH
10.
REMOTE
11.
EVENT LOGGING
12.
DIRECT
.... .......... .. ...... ......... .... .. .. .. ...... ................. .................... .....l
2
...... ............ .. ...... .... ................. .. ........... .. ...................... .......l 2
THE VIEW ANGLE/lNSERTING
THE N~EPMTE
......................................................f
2
J7 ............. ................. .......................... .................... ...... .................... ...... ... ........ ... 14
START MODULE .................... ................................ ........ ........ ......................................14
CONSOLE
MRING
SOUNDING
MOUNTING
~14.
MOUNTING
15.
4190WH
16.
SUMMARY
. ....... ........ .. .. .. ........... .. .... .. ........c... ................. ............ ............... .. ..l 5
DIAGRAM ........... .............. ........... .............. ................. ........ ....... 15
PRINTER CONNECTIONS
WIRE DOWNLOADING
13.
-4-
CONSOLES
THE CONSOLES
. .............. .... ............. .. .. .. .......... .... ....... ..................... 16
CONNECTIONS
............................................................................16
THE PC BOARD ............. ............................................................................................ 17
THE CABINET LOCK ... ................................................. ................. ............................. 17
WIRING DIAGRAM .................. .... .. .. ..... ........ .. .... ...... .. .. ... .......... .... .......... .38
OF CONNECTIONS
DIAGRAM .....................................................................................39
OPERATION&
L
GENERAL INFORMATION
INTRODUCTION
TO THE
CONTROL
NOTE: At hast orw 5137AD consob must b. used with this system.
)
J
The VISTA 4140XMPT Oontrol is a micropmcasaor baaed, Programming can be performed at the office prior to
programmable, partitioned syslom, and features EEROM inatal~!on, or on the job site directly from the czmaole,or can
memory technology (power baa does not result m tha loss of be downbadad from a remote locationor at the pb site (using
information). The Control supports up to 9 wired zones of a PCAsptopwith 41 OOSMSerial Modub) by usingthe Ademco
protection, expandable to 64 zones (wired and/or wireless) 4130PC Downloading Software. For installer oonvenienca,
using 2-wirs polling bop devices, andlor wireless transmitters the Control is Pm-programmed with a sot of standsrd values
(5700 serias), and supports alpha (5137AD) display oxwoias. that ia designed to meet the needs of marry installations.
Before installing this partitioned system, become completely These values, however, can be changed to suit ths needs of
familiar with the partitioning concepts, including zone any particular installat”mn. The Control can also be predWibution (each zons can be assigned to only one partition), programmed by the installer with one of four standard
user code usage and authority levels, and the friendly alpha communication default programming values, thus further
saving time and effort.
console programming for zones and descriptors.
SYSTEM IN GENERAL
. Up to 8 bgical partitiin~of operation,
and supports up to sixteen 5137AD
consoles.
. Built-in Polling Loop interface, with
polling loop terminals located on the
panel’s terminal
block, allows
expans”mnup to 64 zones.
. Supports up to 50 tatching type 2wire glass break detectors on zono
8.
. Supports up to 16 2-wire smoke
detectors on zone 1.
. Quick (forced) bypasa feature
bypaases all faulted zones with
singie key entry sequence (Oode +
BYPASS + #).
. Memory-of -alarm feature. which,
upon
disarming
the
system,
automatically displays all zones that
were in an alarm condnion WW the
system was armed.
. Seif resatting
circuit breaker
protection eliminates the need to
replace blown oartridge fuses.
. Built-in Users Manual (5137AD onty).
By depressing ●nd holding any o~the
function keys on the oonsde for 5
seconds, ● brief ●xplanatbn of that
particular funotion aorolta ●crosa the
atpha-numaic d-y.
. Afl programmed descriptors can be
displayed (one at a time) by pressing
and holding the READY key for 5
seconds, then releasing the key.
This sewes 8s ● check for instafiera
to be sure ●ftdescriptors are ●ntered
properly.
. Large oabinet with removable door
for easier instafiations.
PROGRAMMING
. Up to 128 user sacurii oodes (max.
●
✎
●
●
●
✎
✎
●
99 par partition)can be programmed,
each with various levels of authoriiy.
Installer code override faaturo.
Inetalier coda will disarm system only
if it was uaad to arm the system.
All zones and partitions can be
assigned atpha deacriptiins.
Up to 20 custom words can be addad
to the buitbirrvocabulary.
Thalatter%-or-’s
”oanbaaddadto
descriptors.
programming
for
Easy
oommunbation fields. Simply ●nter
the desired code for ●aoh zone.
Communication defauff programming
can babadad anytime, anddoasnot
affect non-communication program
fiefds.
Diracf wire downbading sari be done
without ● modem, using ● PC or
La@op computer and 4100SM Sariaf
Modufa.
Easy programming of zones using
#93 Menu Mcda.
COMMUNICATION
All 64 zones cart report to a cantrai
station using any repofiing format.
●
Callback
defeat
option
for
downloadhg.
●
Real-Time cfock included for time
related functions. NOTE: 5137AD
console must be used to set the reaitime clock, or can be set using
Oownbader software.
●
Random AC Loss and AC Restore
reporting option eends report
randomty from 10-40 minutes after
AC Iosa, to hetp prevent central
stations from receiving an overload
of reports dua to ama blackouts.
●
Intelligent test reporting option
means teat reptma will not be sent if
arty other report was sent within the
programmed test report interval.
✎
Sptit/Dual reporting communicator
option.
●
Optii to afbw ● oancal report to be
sent, ●von after Bell Time-out has
●nded.
✎
PC Downbader abiiity to command
output vottage triiger to pulse on for
2 seconds.
●
ParfmningArcftiirs
-5-
INTRODUCTION
TO THE
PARTITIONED
SYSTEM
● n ovarvlow
of t ho 4140XMPT
~hlo
soctlon
1s Intondcd
to ohm you, tho Installer,
oonoepta. For spaclfk
quastiotw on progrsntrnlng or using specific ●sp~cts of tho panel,
THE SYSTEM sections ‘of this manuai.
to the SYSTEM OPERATfON ●nd PROGRAMMING
partlt toning”
plosae rofor
+
The 4140XMPT represents the iateet in apace pmtadion mohndogy. Combining wired, wirefesa and wiling loop xonos into one
environment. A petitioned
powarfui wntrol. the 4140XMPT & ● ~ntroi communicator capable of suwrting a true ~itionti
onvironrnant is one whereby muftipio unmiatad users wish to be protected by ● saourity system yet aech user raquims the
operational freedom * have tho system behave as if it was theirs and theirs alone. Thb global definition impiks a bt of things in
terms of the required fasturos of tho equ@manf you will install. Some basic foatums ●re fisted below
BASIC PARTfTIONING
FEATURES
Easy to use ●nd program as the simpieat alarm system.
✎
irttagrity of aecurhy is not oompromiaed for arty usats of the system.
●
hhwant miiabiiii of the partitioned syatom is equal * a stand alone aiarrn system it purchased Saparmoly.
✎
Flexible numbar of consobs per partitiin (UP to 16 ●nyway you want to assign th.m!)
●
128 User Codes assigned virtualiy anyway you want them (99 msx per any partition, otherwise no restricfiirrs) Enough to
handle the largest commercial pbs.
●
M zones em~yi~
wired, wireless or multiplex technobgy (install any mix for any type of amstruction chailengas!)
✎
Appropriate sounds and massages to assigned ansoias only (Each system appears to be independent to users)
✎
Abiiii to inhbit other mnsoias from using your paftition (Total saourffy in a strip mall environment)
✎
=10”
fundion provides ~ss
to other partitions (fcieaifor executive access to factory for ●xampb)
✎
per partition (Allows key paopb in a partitiin to have campiate oontrol ●nd iimit eystem tampering
Muftii bvois d ●ut~
by Othere)
✎
Arty zone can be assigned to any particular partitiin (Easy to instail, allows logical assignment by the daabr)
✎
inteifigent parMionmns programming hap (Siipiifies the programming ●nd reduces errors)
✎
Programmable 4-charac@r Partition name displayed when needed (No need to memorize numbers - name ●nd number ●re
shoivn
for you)
●
EXAMPLES
OF PARTtTtONING
in surveying deaiers throughout the country, we have
iearnad of two giobai appiiitiona
for partitioned control
panels. One is ● typical two family house (residential), the
other ● Factory/Offiie environment (commercial). Theee
broad dassifiodions can batter be understood by way of
exampias.
lWO FAMiLY HOUSE: YouWe just ●rrived at a pb site to
quote ● security system. The ownor wants an alarm ●ystem
whkh ha oan use for his famify (living upstairs) AND ha afso
wants b provide protection for the aaparata living quarters of
his mother (iiirtg downataira with aeparata ●nfranoe). The
owner obviously wants to keep oo$ts down yot provide
protadion and flexibility for hm mother iiving downstairs. You
GLOBAL PARTtTiONING
FEATURES
AND RESOURCES
in any system, oartain physical system components ●nd
features ●re shard by ali pertitiins or assigned to a speoifii
Dartition. in the 4140XMPT, tha foibwintt eiemertts are
.*-
CMtinn
l..*Muuhb *nnm9uailir
in ●ddition to the physioaf devioas whioh ●re shared, the
system shares some software features on ● global basis as
oouidchooaatoirtstatlatradiil
aiamrpanalto kaepmsts
down, but the system would be very limiting for ●ither the
mothor or tho upstairs family. To moot the fioxibWy
roquimmonts ● s deeired, you oouid install two traditiinai
●iarm panels, but the cost might cause you to bse the
business. Now you can quote the 4140XMPT
with
oonfiienod
FACTORY/OFFiCE:
You arrive at ● smafi manufacturing
cmoem boiting to pmvido proteion throughout tMr offiis
as woil as ttiir factory. The very nature of the business ia
such that factory wrkara mrrre to writ at 730AM ●nd bava
at 4PM, whifa the offkes are open 830AM to 6WPM. Some
●xocutivas wan want to stay late at night or oomo W
to
wotk after 6WPM.
irtetafiii two panais (one for the faotory,
one for the offiis) would oartainiy work at ● aret premium,
to gain
but think of ati the comptox.hy whan ownors tried
~
to the factory after hours...two aoceas oodes to
remember, aooidarttai false atarrtte. Even the reef frustration
ofrtot W~ngabie topmparfy Pr09ramth. twosyatornsto
●ifow ●asy aoceas from the faotory to offii or vice varsai
htstaffthe 4140XMPT, your programming pmbfams ●re over,
~
g~~lof
the buahess wiil approd$ta its fbxbffh’y
-6-
..
11
r
-.-—
mrv-i
.1
delaat
I
I
4
,—
.. . —. —..
PARTITION
SPECIFIC
FEATURES
Many davbes ●nd functions need to be reservad on a partitiin
basis to orovide cwoparmaration and flexibility for irtstatfations.
,,:. .
Il. ZONE CONFIGURATIONS
ZONE
TYPE
DEFINITIONS
The VISTA 4140XMPT System albws up to 64 zones of hard-wire, pollingbop andlor wirebss protection,distributedamong up
to 8 partitions. Each zone must be assigned to a zone type, which dafhes the way in which the system responds to faults in
that zone. In sdditkm, there are three keypad activated zones (PANIC keys, see note below) for each partition, a polli loop
supervision zone, and four RF supmisory zones, tvm for each 4280 or 4260-8 RF Receiver installed.
TYPE 1: ENTRYEXIT
#1
Used for the primary entry/exit route (ox: front door, main
entrance).
TYPE 2: ENTRY/EXIT
#2
Used for a secondary entry/exit route (ox: Garage door,
bading ti
door, basement door), where more time might be
needed to get to and from the ~nsole.
TYPE 3: PERIMETER
BURGLARY
Used for exterior doors and/or windows whmh require an
instant alarm when violated.
TYPE 4: INTERIOR BURGLARY (FOLLOWER)
Used for areas where an entry delay is required only If an
entry/exit delay zone is faulted first.
TYPE 5: DAY/NIGHT
BURGLARY
USsd for zones WMI anain a foil-protected door or window
(such as in a store), or to a zone cevering ● sensitive area
such as a stock room, drug supply room, etc., Or othor
controlled access area where immediate notificafiin of an
entry is desired.
TYPE 6: 24 HOUR SILENT ALARM
This zone type is generafly assigned to ● zone mntainings
Hofd-up or Panic button that is designed to initiate ●n afarm
report to the Cantrat Station, but whti produces no visual
displays or alarm sounds (ox: banks, pwelry exwnters).
TYPE 7: 24 HOUR AUDIBLE
This type also assigned to a zone containing ● Panic button,
but whch will initiate an audible alarm in sddiin to an afarm
report to the Central Station (ox bedside panic).
BASIC
~PE
8: 24 HOUR AUXIUARY
This type assigned to a zone containing a button for use h
personal emergencies or to a zone containing monitoring
dev”ms such ●s water sensors. temperature sensors, ●tc.
Designed to initiate ●n alarm report to the Central Station and
only provides Console ●larm sounds and alarm displays.
TYPE 9: SUPERVISED
FIRE
Used for zones containing smoke detectors, heat datectors,
pull stations, MC. An open in this zone will initiate a trotJbb
eignsl. A short in this zone will initiate a fire ●larm (pulsed
●xternal sounder and report to central station).
TYPE 10: INTERIOR BURGLARY (DELAY)
Thii type is similar to type 4, except that entry delay ~ms
whenever sensors in thii zone are violated, regardless of
whather or not an entry/exit delay zone was faulted first
NOTE FOR PANIC KEYS
Keypad panic zones share the same zone roeponse type for
all 8 partitions, but panics may be individually ●nebbd for
each partitikm.
IMPORTANT!
FAULT ANNUNCIATION
Polling bop and RF faults (zones 88-91 & 97) will report as
trouble cmditions only, ●nd ●s such, should be assigned
●ither zone type 00 if no annunciation is desired, or zono
type 05 if ●nnunciatbn as trouble mndiiion is desired. See
FAULT ANNUNCfATION notes in POLLING LOOP and
WIRELESS EXPANSfON sectionsfor more information.
9 HARD-WIRED
ZONE 1
This zone has a 350 rnillisacsnd response ●nd can ba
assigned to any zone type. ft ~
be EOLR supervised or
cbsed circuit unsupervised as required (the red PCB jumper
is used to make this sabction). This zone is the only zone
that can support up to 16 2-wire smoke detectors. See
SMOKE DETECTOR CONFtGURATfON section for ● fist of
compatible detectors.
When use of the EOLR is sebcted (red jumper intact), both
open circuit and dosed circuit devices can be used. Connect
closed-circuit devices in series with the bop wires, and
connect open circuit devices in paraflel across the bop
wires. The 2,000 ohm EOLR must be connected across the
loop wires at the last device. When use of the EOLR is
disiled (red jumper cut), only closed circuit devices can be
NOTE: EOLR supervision must be selected whenthii zone is
used as a fire zone. Maximum zona resistance, excluding
EOLR, is 100 Ohms.
ZONE 9
This zone is unsupawised and can be assigned to any zone
type except fire. Only dosed-circuit devices can be usad.
Connect these devices in series with one another between
terminals 22 & 23 (see SUMMARY OF CONNECTIONS
Diagram). This zone can be programmed for either normal
responee (350msec, the default responso) or for fast
response (1 Omsec). This zone is suitabfe for monitoringfast
●cting glass break sensors or vibration sensors when
programmed for fast response. Avoid using mechanical
ZONES
magnotie or rday type contacts in this zone when
programmed for fast response. Not. that tho maximum
resistance for thb zone is 300 ohms.
ZONES 2 THROUGH 8
These zones have a 350 milfis~nd roapoma and can be
assigned toenyzonetyps. Ttteycenba EOLRauparviaedor
dosed circuii unsupervised, as required (program field “41
deterrninos whether or not these zones will use fhe 2,000
ohm EOLR Enter [1] in fiafd ●
41 to dthe use of EOLR’S
on zones 2 through 8). ff programmed for use with EOLR’S,
both closed-circuit and open-circuit devices can be used
with the 2,000 ohm EOLR resistor across the bop wkas ●t
the fast device. ff the use of EOfR’e is diaabfed ~41-1), only
clod-oircutt devices can be used.
zOttS 8 has the SddSd C8pSbiky Of SUppOdng Up tO 602
wire, latching type glass break detectors. See GLASS
BREAK DETECTORS section for ● list of compatible
detectors. These detectors may be reset at the oonaob in
the same manner se two wire smoke detectors. (i.e. asoond
entry of %)FP sequence). zone 8 should be oonfiiurad es m
EOLR type zone when glass break detectors are used. The
maximum resistance per zone, excluding EOLR, is 300 ohms
for zones 2-7, and 100 ohms for zone 8.
NOTE: ff fatting type devices are insfafbd on both zones 1
& 8, and these zones ●re ●ssigned to dtierent partitions,
there IS ● POSSIMY ths4 d both dewcss go mto afarm at the
G
-7-
2$3
2-WIRE
POLLING LOOP EXPANSION
(Zones 10 through 64)
GENERAL
lNFORMATtON
Tho 4140XMPT provides a buift-in 2. wire polling toop
intatiaoa whbh ●llows the number of zones to be ●tpmdad
from the basic 9 zones to up to 64 zones using various
RPMs, and the 4280 RF Raoaiver. Sse babw for ● tist of
armpstfbta sensors.
Thapoftii
bopprmMaa powartoaensorsand aervasasa
communbatbn path between the panel and sensors. Eaoh
sensor must be aasignod ● unqus address tO number (frmm
10-64) bafora bdmg oonnectod to the polling hop. Most
sensors have DIP switches for thb purpose. Sea the DIP
SWITCH SIVfllNG TABLE FOR POLLING LOOP DEVICES
for information on how to assign lD numbers using DIP
awhchas. Care must be taken to assign unqua tD numbers
to S*
sensor ‘mordor to atbw tho panel to supervise ●nd
provide unquo oonaole status indbatiins for individual
sensors.
connect thcsa sensors ~ terminate 24 & 25. Sensorsan
:?adto ● singlerun, or groups of sensors may be
eon
2 aaparat. wire nJnSwithout affecting the
abiin
Jpewiso individual swtsora. Follow the wiring
tiruc’m. ,vaprovided with irtdiiual aansOra (4180WH Wing
diagram is provided at the ●nd of this manual). Be sure to
oberva sensor polarity when wiring. Ilta maximum albwabfs
wire run tength batwmn tho panel and tho last sensor on ●
givanwiraruniaasfdbwa:
be=’
ADVISORIES
The maximum allowable ourrant draw on tho polling bop is
64mA. Ftafor to tho POLLING LOOP CURRENT DRAW
WORKSHEET (found in the POWERING THE SYSTEM
section of this manual) for currant draws of various polling
bop devices. If more than 64mA is being drawn, use of the
4197 provides ●mther toopwith 64mA avmtabb.
Mah cartsin to indurh tho total currant drawn on the polling
bop in the AUXILfARY CURRENT DRAW WORKSHEET (sea
POWERING THE SYSTEM section) when fiiuring the total
power supply.
auxiliary bad on the
pOnOrS
p8n0rSIMPORTANT!
s22gau@a@650bat mall
s20gsugs@s60kaImax
●4gmlga@mootastmsx
NOlt
Twlsmdm raammsndsd
tordnorrrdwbllms.
816 9su9s@2400hetmax
IMPORTANT:
The maximum oombinad polling bop run
is 4000’. t! using shielded wire, tho maximum is 2000’. If
bngar wire runs w. neadad, a 4197 Loop Extondar Module
must be used (sea inatndorts indudod with the 4197).
POLUNG
INTERCOM
INTERFERENCE
If an into~m aystom is being used, the pollrng Iwrp wires
must bs as far from the imsrcom wiring as poasibb (miniium
6-). tf this spacing cannot be achieved, shielded wire must
be used. If thii is not done, irtterforonca on the intermm
system might occur. Abo note that the maximum total wire
bngth supported is cut in half when shmldad wire is used.
LOOP
FAULT ANNUNCIATtON
Since the polling bop ●nd tho RF racaivar(s) ●re shared
among the 8 partitions, the scheme for annunciating their
failure is 6s follows:
Respective faults (for zones 86-916 97) will report 86 trouble
oonditiins only, and as such, should be assigned either zone
type 00 if no ●nnundatbn is desired, or zone type 05 if
●nnunciation as troamdhion is desired. tf the polling boP
or RF tink faifs, the corresponding zone number will display a
trouble oondiibn for ●ach panitibrt thatuses the devioa that
failed. In addition, aft zones asaooiatad with that dsvbs will
indicate ● fautt condition. The troubia condition will not
to ●rm thepartitkm, but thefaults
interfere with theability
must first be bypauad.
DEVICES
●ectlon
See
PERIPHERAL
DEVICES
detootoro
compatlblo
polllng
loop ●rook.
psodvo
Infrared
motton dotootors.
for
●nd
4184 Surtaoa Mounted Read Contaot
●
(Wide Gap)
W@e gap aurfaoa mounted raad oontacf with buift-in RPM,
which k DIP switch programmabb.
4208 Eight Zono Polllng Loop Eapattdon
Moduta
4197 Polllna LOOD ExWtdor Module
s Uudtosupewise
upto8hard+vkad daviasviatha
PoltiIIE . Can be u~ if the-2-wira po8ing bop must be greater than
@p. NOTE Doos not st@port 2-wke ●rooks dat@tofs.
the raootnmwtded bngth (40W mu). By installing ● 4197
●
Sat DtPawkhea toidontify 8 zonea.
●t the ●nd of the first loom tha @iin9 fooP -n bS
●
The fm tvm zones can be either normal or fast response
cmtinuad. If more than 84mA naads m be drawn from the
polling bop to power RPMs, use of the 4197 provides
(DIP Swttdt aalaotabb).
anothor bop with 64ntA avaifabb.
●
Afl zones ue EOLR supmised (fkst six zones = 4.7k
ohms, battwmzonas =20kohms), provWedwith tha4208.
s connects to the polfirtgbop and is powered fmm wxiiiiry
power or by ● separate 729 power suppfy with battery
backup.
4190WH Two Zone Rarnota Pobtt Moduts
●
Uaedtot
Wiaa2hard-wirad daviouviatha pdtiibop.
DtP Swk” ?Jmgremmabk
● Thaleft zoneoanba EOLR suparviaad, tfnaossssrY, and
oan aowpt dther ~
or ctoaad oirouft sensors. The right
zone is unsupervised ●nd oan aooept dosed circuit
sensors only. Rofor @ the 41wWN OPERATION sactbn at
thaanddthiirnanuat
formoro~.
●
-a-
WIRELESS
(Zones
.
4280/4280-8
RF RECEIVER
The system supports up to 83 wimbsa tmnamitters (5700
series), plus a 5727 wiretass keypad. To ●xpand tho syetom
using wireless, one or two 4280 RF Raceiiora (or 4280-8 if
only 8 wirelesszones are used) mustbe connected to the
polling loop. The 4280 receives status ●nd slarm signals
from wireless transmitters (@345MHz USA; 315MHz
Canada) within a nominal range of 200 feat, and relays this
informationto the control via the polling hop. Two 4280s can
be used to provide ●ither a greater ● rea of coverage, or
provide redundant protection.
IMPORTANT
Note that if using two RF Receivers, one of
them must be powered from auxifiiry power.
For more information regarding the 4280 instailatkm, refer to
the installation instructionsprovided with the 4280.
E: Unless stated otherwise, references 10 the 4280
Receiver represent the 4280 andlor4280-8 Receivers.
PROGRAMMING
NOTE
All RF zones must be designated as such in their raspacfivo
program fields (1”1 8-1 “25). Any zone from 1-83 can be
designated ●s an RF zone. To enable ● zone as wireless,
simply ●ntar ●‘1” in the bcation for that zone, or us. the #93
ZONE PROGRAMMING
method. Be oaroful when
dealgnathtg RF zonee. If you want ● zone to be ●ithor
●nabb &as
hard-wired or on tho pelting loop, but ~rttaity
RF, the system will ignore that zone. RF ●nabfa overrides
wire!
ff using a 4280-8, onfy up to 8 zones oan be ●nabbd as RF
zorws. ff more than 6 zones ●re ●nabled, the meseaga
‘SET-UP ERROW will be diaphyad.
SUPERVISION
Each transmitter (except 5701 and 5727) is auparvised by ●
check-in $ignal that is cent to the receiver at 70-90 mhruto
intewals, ff at least one Check-in b not received from ●
transmitter within ● programmed intervat (field 1°31 ), the
console will dmpiay the transmitter number ●nd WHECW will
be displayed.
Each transmitter (including 5701 and 5727) is ●lso
supervised for low battery conditbns, and wffttransmit ● bw
battwy signal to the 4280 when the battery has
approximately 30 days of life ramaining. The consofe wilf
display the tmnsmittor number and %0 BAr.
NOTE: After replacing a bw or dead battery, activate the
transmitter ●nd ●nter the security c@de + OFF to dear ita
memory of the low Batter signal.
The 4280 itself is afao auperviaed three waya:
1. ff the cover of the 4280 is removed, ● TROUBLE wift be
disptayed for zones 89 or 91 (if type 05 is ●ssigned in
field 1“09).
2. ff the connection is broken between the 4280 and the
control panal, a TROUBLE wifl be diapfayad for zones 89
or 91 (i type 05 is assigned in fiotd 1“09). In addtin, aff
zones associated with the RF device will report a troubb
conditiin.
3. If, within ● progmmmad interval of time, the 4280 does not
hear trom any of its tmnsm”~ra, ● TROUBLE will appear
for zones 88 or 90 (if type 05 is assigned in fwld 1“09).
HOUSE
fDENTfFfCATfON
The 4280 responds onty to transm”hterawith the same house
ID (DIP awitoh programmable from 01-31). Thb pravants
system intorfomnce from transmfttors in other newby
aystema. To mdce sure you do not cfwose a Houaa ID that is
in US* nearby, put the system in the Sniffer Mode, which b
described fater in thm section.
EXPANSION
1-63)
TRANSMITTER
lDENTIFICATfON
Each transmitter haa its own unique tD number (Zone #),
whii is DfP switch programmabb in ●ach unit. Whenever ●
tmnamisaiin takes ptaca, ●ither for an afarm, fautt, check-in
or tow battery, ths ID number is sent ●bng with the massage
to the 4280 which, in turn, relays this information to the
control panel, whii displays the condition ●nd zone number
on the console. See the DfP SWITCH TABLES FOR
WfRELESS DEVICES at the end of this mmuaf, for individual
transmitter settings.
SNIFFER MODE FOR HOUSE ID (ado + [#1 + [2])
To check for house fDa being used in nearby systems, set
the DfP switches in the 4280 for ● House ID of ’00- (all
switohes up), then enter your “installerCode=+ [#]+ [2]. The
4280 will now “sniff= out any House IDs in the ●rea and
diapfay them. Keeping the 4280 in this mode for about 2
hours will give a good indicationof the house fDa beiig used.
To ●xit the Sniffer Mode, simply key your inataUer code +
OtXWfifi:t
your house ID to one not displayed in the
.
IMPORTANT: Since Sniffer Mode affectively diaabba
mint raceotirw Sniffer Moda oannot be ●merad Wlb anv
.
rtitionis’armid.
J
CHECKfNG TRANSMflTER
HOUSE IDs
(Oode ● [q ● p])
To check that ●ti transmitters have bean set for the propar
houaalD, aetfha4280 totheproparhouaa lDandontartha
Inatalbr codo + [#] + [3]. Aft tranemittere that have been
●tablad for tho parthii in whfch the test was irdfbted wifl be
diapfayed. * aach tranamhtor checks in (up to 2 hours), Its
ID number wilt disappear. A faster way to do this is to fault
●ach transmffter, wh@ cauaaa ● tmnsmiasion to be sent to
tho 4280. When afl transmlttera have checked in, there
shouid be no tD numbara displayed.
1*
NOTE: Repeat this procedure for ●ach partftbn that uses RF
tranamlttem.
BUILT4N “QO/NO GO- TEST MODE (Patontod)
This mode helps determine tho best bcatbn for ●ach
transmitter and is activated by putting the control panel in
the TEST mode ●nd removing tho 4280’s covor. The
racefvera aanaitii
is reduced by haft. Once transmitters
●re pfaced imtheir dasired locations ●nd the●pproximate
length of who to be run to sensors is oonnocted to the
transmitter’s screw terminab, opan circuit ●ach transmitter.
flonotcunducfthi
atsafwithyourhan
d~atoimdthe
transmitter.
ff ● sh’tgb 4280 is used, the conaob wilt beep three times to
indii
signal reception. #two 4280s are uaad, theconaob
wifi beep once if the fti 4280 received the signal, twice ffthe
second 4280 received the signaf ●nd three times if both
raceivara heard the signal (which is daaimbb for redundant
confiiumtions).
tt the oonsota doos not beep, reorient or movo the
transmitter to another boatiin. Usuafly ● few inches in ●ither
diraotion is atl that k required.
To exft thii mode, replace the 4280’s cover, then ●mer the
instafler coda and proaa OFF. Not. that the Receiver’s
aenaftii is fully restored when the cow is rafkad.
-9-
ZV5
.
IMPORTANT
BA17ERY
NOTICE
Tho VISTA wimbss tranarnittws are designed to provkfe bng
battery life under normal operating conditions. Longevity of
batteries may be ●s much ●s 4-7 years depending on the
●vironmont, usage, ●nd the specific WKSIOSSdevice bshg
used. Extomal factors such as humidity, high or low
tampamturas, as well as large swings in temperature may all
raduco the actual battery iii. in a ghran installation. The
VISTA wirobss system can identify a true low battery
situation, thus allowing the deabr or user of the system time
to arrange ● change of battery ●nd maintain protection for
that given point within the system.
6. Refer to the maximum polling loop wirs runs described in
the POLLING LOOP sktio; when connecting 4280s to
the polling hop.
lMPORTA~
The maximum combined polling tip run
is 4000’. H using shielded wire, the maximum is 2000.
FAULT ANNUNCIATION
Since the polling bop and the RF receiver(s) are shared
●mong the 8 partitions, the scheme for annunciating their
failure is as folbws:
Respective fautrrl (for zones 88-91 & 97) wiii report as trouble
conditions only, and as such, should be assigned either zone
type 00 if no annunciation is desired, or zone type 05 if
annunciation as trouble condition is desired. if the polling loop
or RF iink fails, the corresponding zone number will display a
troubte condiikrn for aach partition that uses the device that
faiisd. in addition, ●ii zones associated with that device wiil
indicate a fault condition. The trouble condition wiil not
interfere with the abifii to arm the partition, but the faults
must first be bypassed.
WIRELESS
ZONE TYPES
Each RF zone can be programmed to respond as any zone
type such as ENTRY/EXtT, INTERIOR, PERIMETER, etc.
(sss the ZONE lWES section for ● cmrtplete axplanatbn of
each zone type). Desired aiamt responses areas Ioibws
46mrough._
WIRELESS
46 dwougrr55”(57a
46ttsaq
620r63’
1 tr~h.,
~ thnutnh4+ ●
S..
tho
Peripheral
DEViCES
section
wireieas
smoke
detectors
compatible
passive infrared motion doteotors.
24 HourParic
(sdentor ●udible)
DsynwghtBur@ary
2 Ho ✎✎ ✍Allrlllmru
✍✍✍✍✍
✌
m
:OT:S
.
f40ts tht ZOIWS143 can be USSd,but have the fdkwi~
fimiidons: Tmnsmittsmsatfor zones46-55 M transmit~
●my 12 secondswtrii uw zone is faulted.Transmitterssatfor
Zolws 56-63 win walwmitOrra awry 3 ssoo* Whii faulted.
Theso two ranges ot zone numbets could advarsstydtsct
~smhter banmy life. Transmitterssat form ID of 32 ~gh
47 will hew ● 3 minute fockut batwsen transmissions.Use
this test mngo of zone ID numbers for sensors protecting
~-doomwwif
ltibc-emt$at
mytife.
‘“ ;mnsm!tW IDs 46 though 55 havehigkt si~ priw@.
W* mnsrmtwlDs62md63usunsupsnJisad
m@vrramovatot
r
.,.
-,.
-
I
be 5701Orfpremises
-signal priorityis
fowrhsnthet offire,
buthigherthanburglary.
ADVISORIES
1. Do not place tmnsmtttors on or near metal objects. This
wifi dsoraaea rang. tir
bbck tmnsmissiins.
2. Ptaca the 4280 in ● high, centrafiy bcatad ama for boat
raoeption. Do not ptaca racsivar on or near metal objects.
3. Tho 4280 roceivor must be at least 10 feat fmm tho
Control panel or any remoto censolos to ●void
intedoronce from their micaoprccassor.
4. When connecting a door/window contact to ● 57t 1,
5711 WM, or 5715 transmitter, avoid ● wire bngfh of 20-24
inches. Thii particular length dacraasss range. A shoner
or bngor bngth has no effect.
UL
NOTE:
For
UL
Housohold
Burglary
Installations,
wired ioops connocted
to these
dwicos
cannot ●xceed 3 foot.
5. tf duai 4280s or 42808s am used:
A. Both must be at iaast 10 loot from ●ach other, as wsli
as from the Controi panel and remote oonsofas.
B. One of the 4280s or 4260-8s must be powered from
Aux. power so as not to ●xcasd 64 mA poiiing foop
current rating.
C. The house iDs must be the same.
D. Using two Ftsceivers doss not incmaso the number of
transmitters the system can support (63 transmitters,
pius a wirebss keypad).
-1o-
DEViCES
for
●nd
5701 Panic Transmitter
. Progmmmabta for ●ither silent or ●udbia 24 hour alarm
(can be DIP switd programmed for zones 62 or 63).
5711 Sllmline Dcor/Window
Transmitter
●
Can be used with any dosed arcuit sensor. NOTE: Can be
used on any zone 1-63 but, it programmed for zones 3247, there wili be a 3 minute iock-out between
transmissions.
5711 WM Door/Window
Transmitter
w/Reed Switch
●
Siimiine doortwindow tmnsmitter with buitt-in reed switch
(magnet inciuded). Can be used with any closed circuit
ssnsor. NOTE: Can be used on any zone 1-63 but, if
progmmmad for zmes 32-47, there will be ● 3 minute bckout between transmissions.
571 5WH Univorsai
Transmitter
. DiP switch saiectabb for fast response, open or closed
circuit sensor usage, and has ● tamper protected cover.
Use in appiiiions where open circuit heat detectors ●re
needed or wham fast rasponae devices ●re needed.
NOTE: Can be used on any zone 1-63 but, if programmed
for zones 32-47. there will be ● 3 minute tock.out between
transmissions.
5727 Wireiose Keypad
●
Wkeiess keypad that can be used to turn the burgiary
protection on and off, and features the same buitt-in panic
functions as wired consobs for either sibnf or audible 24
hour ●larm. An LED indication iiihts each time a key is
pressed to verify transmission (LED boated in the ~]
READY key).
●
The keypad is identified as zone Wr when it transmits low
battery messages. Ths keypad panics ●re idontifbd as
%~!g~
[#l, ‘W for [#]+ [3], and W5- for ~]+ [1] if
.
S716 Door/Window
Transmitter
●
Can be used with anY open or closed circuit sensor (DiP
switch selectable), and features a built-in read switch.
NOTE Can be used on any zone 1-63 but, if progmmmed
for zones 3247, thers wilt be a 3 minute Iook+ut between
tmnsmissions.
Ill. PERIPHERAL
DEVICES
REMOTE— CONSOLES
— ——
GENERAL
The 4140XMPT supplies up to 750 ti of auxitiary power tir
rmrrote consoles, pelting bop devices andbr other auxiliary
devices such as motion detectors or 4-wiro smoko
detectors’. The 4140XMPT supports, independent of
●uxiliary powor considerations, up to 16 5137AD
addressable romoto consoles. Up to 8 cortsobs can be
powered from the ●uxitiary powor output provided that the
total current drawn from this output does not axoeed 750 mA.
You must keep this in mind wtmn adding rsmoto consoles so
you dent ovordraw current from tho parwl. This would resuft
in ● battwy which doos not charge properly or possibly ●
tripped auxiliary solid state circuii brwkor.
ADDRESSABLE
CONSOLE DIP SWfTCH SETTtNGS
IMPORTANT! You must eelect ●n ●ddress of O, 1,2, or 3
if standard defaults era to be programmed, since these ara
the only consob addresses enabbd by the standard defautL
IMPORTANTI
Tho Stsndar4 Defeult
ensbtas only these 4
oensolo ●ddrosees (0.$).
Satattosstonscuuob mons
of rhsse-ss0s.
use
-tDsrlsbb
%%%%%
addresses,
It the auxiliary load is determined to be greater than 750 mA,
then additional consolos can be powered from a separate
power supply. The diagram on the next page shows how to
make connections to the s~ate
power supply.
“ 44w
NoT’Esoms Wrsionsofdis
5137ADcutdsmsyhswa6
posirionDIP switi. Ths
●lxth swltoh Is not wad
with tho 4140XMPT ●nd
shouldbe put in tho UP
posltlon.
smokedstscws csnnotbeusedbULUsmd@iation$.
5137AD ADDRESSABLE
ALPHA LCD CONSOLE
●
Equipped with a programmtile 2-line, 32.cftaracter (16
characters par line), backlit alphanumeric LCD for
complete zone identificat’mn in English language (if
descriptors are programmed). Keys are also backfii.
●
An alarm sounder is buitt in, eliminating the need for ●
separate indoor sounder.
●
DIP switch selectable tD number, which aflowe cortsob to
display unique, partitiin spscifii messages.
●
90mA current drew.
ADDRESS W “
DO not U80 wddroas 81
with
the
4140XNP~.
Address 31 causes the
conwkJ m Opsrers in mna@rsssaMe mods (Le. like
8 standard,
nonad&ossaMs 5M7cmsob).
PROGRAMMING
THE CONSOLES
Consobs must be programmed for type, parUtbn number and
console ●oundor suppression options. Refer to the
●sction (DEVICE
PROGRAMMING
THE SYSTEM
PROGRAMMING) for instructions.
WIRING
CONSOLES
Consoles may be wired to a single wire run or indtiual
consoles may be connected to separate wire rune. The
maximum wire run bngth from the panel to a conaotewhich is
homerun back to the panel must not exceed:
s22gaugs@450fset msxknum NOTE: Tlwtwlerhofas*rwm
szogsugs@700 faetmsximum ~rnllstlmoxcosdm
018 gauge@ I 100bet maximum _~~~~~~w
~~
#169wJ90@17=fsot~
#nldOdmke
ff more than one consob is wired to ● run, then-the above
maximum bngths must be diviied by the number of czmsobs
on the run (i... the maximum bngth wwid be 225 feet if twu
consobs are wired on a S22 gauge run).
~
Note that iii
wiring to the wnsobss must be wrr@etodbefore
tfre corrsoks can be mounted.
1. Use the tamplati provided (on ● 5. Spfii the intarfacs wiring to
separate sheet) to mark the
the wires on the interface
positions on the wall for the
connector
supplied with
Insulated
mounting bobs ●nd the cut-out
consoles).
for the wiring. ”
aotdertess wire sptbes (eg.
311)maybeusodforsPlbin9.
2. Pull the interface wiring in the
watl through the cut-out.
6. Attach W main body of tho
consote to the wstl-mounted
3. Removo the console’s back
back cover. TIM console is
cover. Remove the securing
properly ●ttached when it
screw at the front of tha wnsob
snaps into place. Uso tho
to release the back cam.
securing screw (previously
wiring
4. Pass the interface
removed) . to . secure
the
through the opening in the back
.
consota tottre McK cover.
wve~, than mount the back
II
cover to the watl with screws.
““.-
“wl!iw--LB
~,<
--
/
Pbtwea. sunPAcs MOWmJO~
11 -
2+7
POWERING
ADDITtONAL
CONSOLES
Up to 8 consoles can be powered from ths 4140XMPT
auxiliary powor output provided that the 750mA rating is not
●xceoded. The 4140XMPT’S bSdUlp battery Wiit SUpp~
powor to these consoles in the event that AC power is bst.
Connect these conaobs using consob wire cobm shown.
Additional consoles can be connachd to the system by
using a regulated, 12VDC power supply (eg. 487-12 suppliis
12V, 250mA; 488-12 supplies 12V, 500mA). Nets that the
maximum number of consoles supported by the system is
16.Connect additional consoles as shown below, using the
consob wire mbra shown. Each 5137AD drawa 90rrtA Make
~:d to obsorve the ourrent rstings for the power supply
.
Wire run lengths from the 4140XMPT to consotas are lied
on the previous page ( maximum combined wire run lengths
for all consoles must m OXCSed2000’, or 1000’ifshielded
cable is used).
Ths 467-12/488-12 power supplies have a backup battery
which can power these cmsoles in the event of AC power
toes. Note that oxwobs powered from supphss which do net
have a backup battery will not function when AC power is
bat. In this ease, make sure to power at bast one amok
from the 4140XMPT’s auxiliary power output.
I
auPPtEMENIARY
SuwLr 1
~
4140XMPT
lERMINAlSlmP
[
I
IMPORTANT:
Make connections directly to the screw
terminals as shown. Make no oottnoctlon to the COnSOb
bluo wire.
-4.
FLUSH MOUNTING
WITH TRIM RING KtT (5137TRK)
1. Cut out a 4-3/4- high by 8- wide opening in the wall
between studs, no bss than 1-lfi from dther stud. Use
the template provided to mark the cutaut.
2. Insert the four 1-1~- long #6 aorows through the
mounting holes in the Trim Wrg and then attachthe four
metal securing dips, as shown in the d~ram. Use only
two or three turns of eaoh screw, allowing the metal dips
to hang freely. ThtI clips must not protrudo beyond the
sides of the Trim Rktg or you will rnt ba abb to installthe
Trim Rhg into the cut-out in the next step.
!!,
. ,
4,
. ,
.—
L
,,
.
3.
4.
5.
install the tnm nng mto the opanmg m the wall with the
hinge clasps to the right. Making sure the trim ring is
straight, tighten ●ach dip screw, making sure thm the
atmchad dlp slides down into its guide track.
Install the Oonsob as follows: Engage the hinge deeps
on the trim ring with the notches located in the back
(right-hand side) of the Oonaole’s front panel. Swing the
bft side of the panel toward the trim ring (the panel will
phmt on the hinge clasps), and press firmly until the
panel “snaps”dosed.
Use the panel securing screw” (supplied with the
Oonsob) to secure the bft side of the panel
----
~~-_~m
—.——
.:!. A. Ov*-..
-. . .
-.. -.
A
●
-
—
\\
~ADJUSTING
THE AL HA CONSO
Insert the end of the smalk key-shaped tool (supplied) into
the small hob to the bft of the console display window (the
adjustment screw is rooassod in this hole). Turn the
adjustment screw to the left or right until optimum viewing is
achieved. Be sure to take the height of the users into
account when making thm ●djustment.
mm
—-w
k’
D
=_—
EXTERNAL
SMOKE
SOUNDERS
RELAY OUTPUT
Tho4140XMPT~
mwotbddsyou@@~bw@d
to powsr ●rtsrnsl slsrm soundors. Oonnoctionssrs mark to
tormirmb 4 @ositiW output) ●nd s (nogstivo rsturn). Soo
SUMMARY OF CONNECTDNS Disgrmr.
NON-UL
INSTALLATIONS
For non-UL installations, ths totsl ourront drawn from thm
output csnnot sxoood 2.8 reps. A bdtsry must bs instaflad
si~ this OUrrontis Stt@iSd by tk httwy. UP to *
702
tirommk
ti,
ti#hmb.
wbti719skons
b Us@d,Wirsd in psrsflsl.
DETECTORS
ZONE 1
Whan programm~ 8s srr EOLR supondssd PtRE zons (rat
jumporintact and20nstyp.09b
Pm9m tiokf*02), upm
When
sixtoan 2-wiro smoko dotuaors oan b. USA
progrsmmsd for fii, tho 00DE + OFF squsntx
momontarityintormptspoworto routdwsmokoti-.
,4TH
,1
Ma
%=3
UL INSTALLATIONS
For UL hmtslbtbns, tho totsl currsrtt drswn fmm this output
●nd tho suxilii powsr output combinod,osnnot ●xcsd 760
mA For ●xample, if two BRK PA400 piszo ●lsrm soundsrs Wmasmc bss
1 BmQ661DH
widrn@lmX@4mA~,tin~ti~tiSUKW61OH
Ionmmonductdsw. wluHm51mema
24 mA) is ●vailsbls for ●uxilimypowor output USS.
ADVISORIES
lMPORTANfi
Gohg bsyond tha ●bovs rncmionsd tim”hs
htiEO~ktitattkoddtk~,tia
zons is not
will owrfosd thopower suppfy or may possibly trip ttw boll
WOW* s%wwbod. Tho sy8tom may not rsspond to srr
output thornd tilt
bmskor.
oooncimuit within tho20no.
COMPATIBLE
SOUNDERS
dsrm CUrrsnt providsd by this zono is SUtfidSllt to
702 outdoor Slrsn
WppOrtopsrs
tkmofonf yonodstauor
kltttoslsrmOd ststo.
●
Sstlerwd
Sirsn(drlvorblath) Wld Ws8thsrpmof
tor Olmbor
SSSkhrboryin SASf09HAR0-WIREDZONE
ssdion.
use.C8nbewk9dtor si6rsrmWa*sound8ndkrsMti
120d6@lots@L lRissimncwI d80ttsmnPsr PrOmcsdorialr ZONES 2 THROUGH S
bs mmmtsd in ● moml @not (716), which OM bs tsmpsr Thsss20rtas 08nsuppoft ssmsny4-wim uttofcodotsotors
protscwd.
mo9rtbspoworsd, wtwnprograrmnodua
FtRE20ns,tYPs
719 outdoor slrm (Cempast)
09, in progrsmfisld “02. Thsro Sro Onfy*
rquirsrnom (1)
“ compsunu-Wudshsn
@hmrW6t4n),sndw
sshmrdbr
Ths20nssmustbsc@@ursd forEOLRsuImisbm
and(2)
ouMooruao.Cm bowirsdbrsitmra zor
Msawrd, wrdis 8 norrnalty-sod,
momontary switoh must bs instsllstt in
mtadat60=@
10koLA706SE abbmtiswdkbls,uMdcm
aorisswith thopowwmtha dotochn inordormabwmsot
bs~pmmasdumomsuy.
ofthosrnoks dstootttm aftorartsfsrm. Tho dstoctofs must
740 High Intsrwlty Soundor
bowirsdinp8rslbl, whhtho EoLRstth9tsstdstuaorfor
fufl
wsnsitysoundsr
rswat122ds @fotnL71ris ~.
“ ommPscthieh
Tosupuvbs powor, ●SRK hh. A7771soI EOL
soundsrsmits=’oar
piordng”, ~h~
sound. This Rdsy hhdub b mconrmondod.
sowrdsrrnbo nmurrrdtifbra
dwthdudsd)or~(m
POLLfNG LOOP SUOKE DETECTORS
706SEcdinct).
Osnboaddsdtotho 2+uiro Po2ingLoaponzonw10throqh
ABBIW1 MOtW Ml & Box
1“03,
64 (ss progrsmmsd in fblds ●O3 “04, “OS, 1%% l=
“ AMSECOrnomrbsllcboxmsdat81 *@lotsst
l*04Mdl”06).
Thssodouotom smwkodhpsrslbfbths
PMOOB (boigo)/PA400R (rod) Indoor Plus Sounder
PoNn9bop
osnddonot ti-fisfymwap
●
Bwhdoorpisso
sourr&(rsd or bsies), radam*@
lo fsot tosotswitoh. Thopofiing bopprovidoapoww
wtdrosot
signslstoths dsts@om, sswotlssslsrrrt sndtroubbsignsb
fmmthsdot~
Rofort9tho msximumpoWirrgbopwirs
PASSIVE INFRARED MOTION
runsli6tsd inths POLLWGLOOP sootbnwhat us@polfirrg
DETECTORS
bopsmoICodstwaom.
Rstsr to ths PIR htsllstii
Instructbns for inasWbn hints 41@2SD Phstooktdo Pang
Lsop Smsks Detoswr
buMl RPMMrMi8
astoths bsstmounting batiort.
●
Orwpismphmmbak smO1mdsmsmrwBl
w-~
4278 Ousd Etomonl Potllrlg Loop Pm
PIR wfdr built-in RPM whii b DtP switch 41WBDT Phomuootrb
Polllna Loop Smolco Dotostor
“ e~t
wlt+oat Domator
-~-m-mm.~
smdw dstador w16r126+ (6PC) hnt
mkmmkxboth widssrlgbsnd ouminmmrmws 8c@os@mo, ●aspbo@phoashW
F9auruan
suxilisrysm
sorlomprhmpsrmits Omnweon
&mmmr.mdbuiRa RPMwhMrb DlP8amr~.
I
&
Snothsrnsubyobudd
cuitdsrrns
srwar(msdsonmas=).
yzcP6zcmlz8u0&i yloks
tpssaor
mmbusWnimlkabn~wmlbuut4rl
427s Dual Etomart Pottha Loop PtR
●
Dud ●lomont PIR wib built-in RPM whioh is DIP SWitOh
m@rlchiBDtP ssdlpro#mmM
. Indudss- rnirrm W both wids angls ●nd
sndomuso Uw16=’A-AJSY
WIRELESS SMOKE DETECTOR
mum o@diG&
Smelts Dotootor
rrdnor.Suitt-irr
6706 Wlrobss Photdoot *
.O1Opiws 8nlolrads90mrwahbdt-bl ~(DtP8wkh
Sn6 Wlrotoso PIR
progq
* zorws 46-66). S@+
UL Listsd 66 dB
●
Tho5776is absttmyopsrstsd. wimbss#u-m
pbmsbcmdsrnlsourdsrmtmd
blskwbmaywmhg.
akctsbbpubceun;
thm
infmmd*tirtitim&
an bsnwnimmdbya4260 (4260.@wimisumd8f9-~~p
mvitdtpqmnmmMkrr zonnw7.
~:
Wba3W
bokltbsnWsn~*m~~*”
-13-
GLASS
BREAK
DETECTORS
PHONE
GENERAL
INFORMATION
Zono 8 can support 2-wire, latching type glass break
dotectora when configured as ●n EOLR supervised zone.
The seand CODE+ OFF sequence momentarily interrupts
power to th~ zone to reset devices wired to it. Use detectors
whii am compstibfe with the ratings babwr
standby
Voftage:
5VDC
- 13.8VDC
Standby Resistance: Greater than 20k ohms (equivalent
rosiatanca of all detecbra in paralfel)
A&rm ~OtanCO:
LOSSthan Ilk
OhlllS (SOSnote betow)
AtarmctJrrOW
2mA-lomA
Roast Tree:
LINE
CONNECTIONS
GENERAL
INFORMATION
incoming phone iine and handset wiring is connected to tha
main terminal block as follows (refer to SUMMARY OF
CONNECTIONS DqramY
TB1-26:
Local Handset (TIP)
TB1-27:
Local Handset (RING)
TB1-28:
Incoming Phona Lins (TfP)
Inarming Phone Line (RING)
TB1-29:
ff if is desired to mnnecf the panel to phone lines that require
ground startcapaMliiy, then a 675 Ground Start Moduts must
be used. Thii modub is triggered by one of the outputs on
the connector labeled J7 (see CONNECTOR J7 TRIGGER
oulPuTs).
LOOSthan 6 aemntfs
The IEl 735L ●ones deteclora have been tested and found to
be compatible with these ratings. Up to 50 IEI ?35L
detectors, connected in parallal, may be used (the , arm
current provided by this zone is sufficient to support
operation of only one detector in alarmed state). FoIfow the
manufacturer’s recommendations on proper instsllatiin.
NOTES:
Detectors which exceed Ilk ohms in alarm, but maintain a
voltage drop in afarm of bss than 3.8 vofts can afso be used.
WARNING:
To prevent the risk of shock, disconnect
phone lines at tetaI jack before servicing the panel.
IMPORTANT
ff the ~mmunicator is connected to a tebphono line insiie a
PABX. be sure the PABX has a back-up power supply that
can support the PABX for 24 hours. Many PABXS ●r~ not
power backed up and connection to such a PABX wifl rosuft
in a communicationfailure if power is lost.
tJse of N.O. or N.C.’contacts
on the same zone may prevent
proper glass break detector operation.
See Adviiry
in BASIC 9 HARD-WtRED ZONE section,
coNNECTO
(Ground
Start
Module,
R J7 TRIGGER
K.yswltch,
GENERAL
lNFORMATtON
connector J7, focated on the right hand side of the main PCB
provides 4 trigger outputs for operating tho 675 Ground Stan
Modula, the 4146 Keyawitch, ● remote consob sounding
piezo, and for triggering auxiiii
afarm signaling equipment
(LORRA’S, STU’S, ●tc.)
The pin assignments of thii connector ●re shown befow. Use
only the 4142TR 9-wire cab& (mraitable as an option) for
making connections to ths connector.
1 Is rated ●e ?ollowe:
When kthrated: 10-13.8 VDC through 4Kohms
Output
OUTPUTS
Remote
Console
Sounder,
etc.)
GROUND START MODULE
Not Intandod for use In UL L18tad ●pplloatfons.
An optional 675 Ground Start module can be used for
installations having telephone Iinos wh@h require ground
stacf instead of loop start operation to obtain dial tone from
the tetca centraf office. ff used, program fmkl 1*46 must be
●et to ‘O” (factory dafauft) and the 675 Ground Start Module
must be connected to the panef’s J7 connector trigger output
1, to auxilii power, and to the ‘RING side of the telephone
fineas SflOWO
inthediagram babw.
Use the following procedure to determine whii
tebphone line is the %lN& aide:
When Do-activated: 100 ohms @ ground
●arth ground,
tebphonefii.
●. connect the ‘+- taad of a DC voltmeter to
Other outpute ●re rated ●s follows:
When Actiiated: 10-13.8 VDC thtough SK ohms
When De-activated: lk ohms b ground
artdthe”-”tead toonesideofthe
b. Thawirawhii
OutPM 1 operates, by detautt, as ● trigger forths 676 ground
start r@ub.
Thii output may optionally be programmed to
operate ●s ●n openlciosa trigger or as ● romota @naole
sounder output. Only one of thase optiona may be used at
●ny time.
Outputs 2 & 4 operate, by dofauft, as Fire ●nd Silent
P@c/Durass
triggers respactivoly. Thoso triggers may
optionally be programmed to act ●s Arm and Ready status
indicators when it is des”ti to use the 4146 keyawii.
reeds +50VDCisths%lfW
L
i
{
-m
s CUM-
~6666b666
~
#
~
~
i
!
m
=
cvl_-
/////
I
<
-14-
ml wummmm m4usca~~~
UD
WT2mm ~-o
-I ~~
aw4 aom~m~-~
sida.
When the panel has ● message to transmit to the oentral
Statiom it witl seize the line. go off hook ●nd then trigger the
675 nrodub to connacf the %lN& side of tho tebphona fine
toaarthgtound. Thapanelwilt oauaethsmodufeto breakthe
connection between “RING ●nd earth ground when ● diil
~
b oM$in~o
.
-t
1
t
side of the
m--
m_-
—
—
w
w~~
-
m~~
---
.
.ww~-=-_
m- -m-*o
mwu*c-ma
~mm_--~
m-m ● —
m9msm
*--*-*-
REMOTE
KEYSWITCH
4146 Ksyswlteh la not UL
NOTE.
●pprovod.
tho alarm
If th. koyswitch option is selected (fwld “15),
trigger outputs are dti.
An optional Rornoto Kayawitch oan be used tor remoto
●rming ●nd dissrming of tho system. Not. that
●rming may only ba uaod In on.
koyswltch
psrtltlon. tt usad, pfogfem fisld “15 must ba eat to ths
dasirad ptition to ●nabfa tha kayawitch option, and the
4146ksysw&h’s normatlyopenrnomentafyawitcff
andLEOa
mustbsconnsctadwZona7and tith. J7w~tfigg.f
outputsrospsctivsly.A 2k EOL resistor must be umnactd
acfos8tha awitchrsgafdla$s ofwhathafof notzcmas24$f.
aelaotad to use EOL resistors. Sss d~rarn befow.
A momentary short across thm zona will arm tho systam in
the ‘AWAY m~e. M the $hoft & heM for mom than 3
seconds, the system will arm in the STAY mods. (i.., all
zones designated as zone types 4 or 10 will bs automatically
bypassed). Aftar thasystem has besn afmad, tha next tirna
zone 7 is shorted, the system will disarm.
An optional dosed-circuit tamper switch (modal 1t 2) oan ba
wirad in swiss with zone 7, so that, it ths switchplata is
romovad from the wall, tho tamper will opan. disabling
kayswitch opemtbrr until the system is nsxt disarmed from
tha console.
NOT12 Onfy on. kqawhch with LEOS can bs supportsd by
tha system’s power suppty.
NOTE: Operucioao reporting for keyaMoh b ●nab&d in
fiikf”40, arxithakaysmMh raportaasusero.
LEO Indioettons
r
w.
~
dofinod
‘-
‘-”-—
~
+=4-------?5-
‘-’L3+---+?J!
.
I
%kMO?E
CONS OLE S OUNDER OPtRATiON
& WIRING
An optional Arnaaoo PAL 328N an be used for instattatbna
wharo it is desirad to ramoto tho sounds produoad by the
consob’s WWin piszo sounder for one parlitii. The panel
will remote all sounds (i.a. alarm, tfoubla, chime. entry/exit,
●tc.) produced by tha oonsois’a built-in sounder sxcapt tor
tho short clicks ●ssooiatod with ~nsob ksy doprossion.
On. application of this featuro might ba to produoa chinm
is distant from the pansl’s
sounds in ● bcation whti
consoles. If used, program field 1“U must ba set to 7 to
●nable tho romoto oonsola soundor @on, and the Amaeoo
piazo must ba oonnactad batwoon tho panal’s auxiliary
power and tha J7 mnector trigger output as shown babw.
in addition, field “15 must ba usad to salact the partitiin
whoso consolo sounds ara to trigger tho aourrdar. Zona 7
must be aaaignad to ba a ksyswitch zona (evan it byswhch
is not Ussd).
b---
:=
1L----
1-
41Uma
-
to. ~00NS0L2~wlaIna
-15-
2?5/
CONNECTOR
(Event
Logging
Serial
J8 INPUTS & OUTPUTS
PrIntar/41gOSM
EVENT LOGGING PRINTER CONNECTIONS
Connector J8, located above connector J7 on the right side
of the main PC board, is intended to be interf~d to a focal
aerial printer via the 4100SM aerial interlaoa module, in
wtii~bm
~m
k b desired to print the ●wrnt bg on ●
boal prmtor. Make connections between J8, the 41OOSM
modub ●nd the aerial printer 0s shown below. Refer to the
●vent logging section of th~ manual for ● daaaiptiin of the
console commands whii inkiata event bg printing.
NOTE 1: Pnmor must be confffurad es fofbwa:
●8datab*. noparity, latopbit
●
Sooor 1200baud(1200preferred)
●
Hardware handah~
usingDTR signal
NOTE 2 The 4100SM module is su@ied with a 10 foot
Or m extensionoabb can be
RS232 cable. A bngor -e
used if the 4140XMPT and aerial printer are separated by
more than 10 teat, but the total cable bngth should be less
than 50 feat.
NOTE 3: Most printers •it~r ignore the CTS, DSR ●nd CD
signats, or require thorn to be h“qh (i.e. 3-15VDC ●s
measured on RS232 DB25 connector
pina 5, 6 & 8
respectively with respect to ground pin 7). The 4t 00SM
module sets these pins high, tf the printerbeing used will not
operate with these pina hqh, then clii the blue (CTS), whiie
(DSR) or red (CD) jumpers on the 41oOSM moduleto set the
corresponding signal fbating. Importantpins on the RS233C
cable are pin 3 (data out), pin 7 (ground) ●nd pin 20 (DTR ready).
Dlr.ot
Wlr.
Dmvrtloadlng)
DIRECT WIRE DOWNLOADING
CONNECTIONS
Tha 4140XMPTcan be dowdxsded withoutusinga modemor
tebphone tineby using41 ~2PC DownloadingSoftware ●nd a
41oOSM Serial Modub.
IMPORTANT:
The
connsctlons
botwaen
the
thwr
4140XMPT
wtd th. 41OOSM ●re dllferent
those
shown
In
the
41OOSM
installation
Inatruotlorw. See dwgram below for correct mnnactions.
In edditiin, when the ~reen’ wire is referred to in step 2 of
the IN CASE OF DIFFIC ~LTY section of the 41OOSM
Instructions, use the “WCet” wire,
tinnactor J8, located above connector J7 on the right hand
side of the main PC board, :s intendad to be interfaced to
either a local sarial prk w (see EVENT LOGGING
00NNECTfDNS) or a computer terminal. Make connections
to a oomputer terminal as shown below. Note that ths
violet wk.
connection
for computor
terminsis
differe from that ueod when concocting ● ●oriai
printer.
NOTE 4: The DTR signal, as moaaured at 41ooSM TB1,
should be high (9.5-14VDC) when tho printer is powered,
proparfy connected, on-line and ready to print. Thii signal
will ba bw (O-1.5VDC) when the printer is not poworad, not
proparly camsctad, off-fine or our of paper. The 4140XMPT
will not aend printingdata to the printer unlessthe DTR signal
is high.
h
-1
s *
●
1
4
7
●
#
0000??
@
fl
a~
[
21
q
Figua 12.DIREm WiRE DOWNLO& OWNECTtONS
IV.
MOUNTING AND POWERING THE SYSTEM
MOUNTING
MOUNTINO TNE 4140XMPT PC BOARD
Bdor. mountine tho cirouit bored, k oortsirr that tho
dam rnotsi knookouts hsva boon romovod, 00 NOT
MPT TO REMOVE THE KNOOKOUTS AFER TNE
A
w
CIRCUfi EOARD NM BEEN INSTALLED.
throo mountingdips on ths rsisod osbinot tsbs.
Obsowo propor ofip orisntstion to avoid d8m8go to tho
dtp when mounting screws ●m tightonod and to svoid
proMsmswith insortbnand romovalofths PC bosrd.
1. Nurg h
ADVISORY
Make osrtain that tho mounting oorows us rsuondy
tight
tohauro that thors is 8 good ground oonnsctbn botwoon tho
PC bud snd #o abirwt. Also, drossMd wiriq awsyhorn
ths mbroprocsssor (oontsr) sootion of ths PC board. Ths
08binM providoa 2 loops on its loft snd right sidswdls for
●choring field wiring using tio wraps, Thoss stops ●
importsnt to minimizingths risk of psnsl RP intsrtorsnoswtttr
toiovision rcooption,
2. lmfitk~dtka~wititb$b$dw~
of ths @Mnst. Maks oortain that tho board rests in ths
sbtsas Mo8tsdinsts
p2dct8il.
3. swing tho bus of tho bosrd into ths mounting dips and
sscuro the bowd to tho cabinet wiih ths~mpsnyirrg
straws (u iliustratsd in stop 3 d,tait).
,r ,,
w
‘1
S&JP
-
-
=%%=—’
um)
Fblmla. MounnNo T?tE?c BoAmD
MOUNTING TNE CABINET LOCK
1. Romovs ths lock knockout on h oontrol osbiit covor.
lnsorttho koyinfotho iocfLPositiithobck
inthshols
making certain that tha Isti wili msko =ntact with ths
istchbmckotwhon thodoorisoiosod.
2. Whilohoidii
tholock stsady, inssrtthofsminsf
the rotsiner slots.
)%-A
r
w“
dphto
Pl@w014. UwNTlrw
mEamrJETLoott
-17-
253
POWERING
PRIMARY
POWER
Powor to the 4140XMPT oontrol panel is supplied by mmdol
No. 1361 ● Piug-in Transformer whti is rated ●t 16.5VAC,
40VA Cauth must be taken when wiring this transformer to
tho panel to guard ●gainst blowing tho fuss inside the
transformer (non-rapiaceabie).
●
NOTE: lfas 1361CN Transformer in Candan
ineteMons.
BACK-UP
POWER
in the evonf of an AC power loss, the 4140XMPT control
panel is supportod by ● back-up, rechargeabfa got cell
battery. YUASA NP4-12 (12V, 4AH) and NP7-12 (12V, 7AH)
battorios ●ra recommended.
Do not use Gates
batterlos
(aealad
load-acid
type).
The standby battery is automatkalfy tested every 24 hours,
beginning 24 hours after ●xiting programming mode. in
addition, entry into the test mode wifi ause a battery test to
be initiated.
NOTE: The above f~uros are approximate, and may vtuy
depending u~n the age, quality, and capacby of the battery
atthetimeof the ACioss.
● Uas 4AH batte~
for UL htdadms.
THE
SYSTEM
EARTH GROUND CONNECTIONS
in order for the tiihtning transient protective devioes in this
product to be effective, the designated earth ground
termina~ must be terminated in a good esrih ground. Tha
foiiowiig ●re ●xamples of good earth grounds ●vaiiabfe ●t
most instaiiations:
Metal Cold Water Pips: Use s nonarrosive metal strap
(-r
~ ~mme~~)
firm@=ured to the pipe to which
the ground lead is eiectricatiy camected snd secured.
AC Power Outlet Ground: Avaiiabie from 3-prong,
120VAC, power outieta only. To test the integrfty of the
ground terminal, use ● three-wire arouit tester with neon
imp indiiors, such se the UL-Listed ideal Modei 61.035,
or equivsbnt, avsiiabia at most electrical supply atoms.
POWER-UP
PROCEDURE
1. Fiil out the Poiiing Loop Current Draw and Auxfiary Devios
Cument Drsw Worksheets shown below. Make sum thst
the currents drswn from these outputs do not exoeed
their respective ratings.
CAUTiON:
Faiiure to observe the potiing loop current
rating wili cause poiiiig loop malfunction. Fsilure to
obsewe the auxiliary output current rating will result in ●
battery which does not charge properiy or possibly ●
tripped cirouii breaker.
2. WIrs the 1361 transformer (1361CN in Csnads) to the
panel (before anrrecting the battery) ss shown in the
suMMARY OF coNNEmONs d~ratlt. m M pluginat
thistime.
3. ~~
dlillii~gebop
and auxiliary devices, suoh 86
O
4. Piug the 1361 into sn 24 hour, uninterrupted AC outlet.
After ● few seconds, the green POWER LED on the
console(s) should iiiht and the oortsoie(s) should display
-DfsARMED READY TO ARM.=
5. Connect the battery as shown in the SUMMARY OF
CONNEC~S
diagmm.
●
POLLING
LOOP
CURRENT
DRAW
WORKSHEET
AUXILIARY
DEVICE
CURRENT
A*m 6--A
675 GroundSranModUls 50mh
4260 or4260-6Rsoam 40m tit
Suilr-kr PoMQ ISoP
(-
A107Dal
lLcYM)F-*imm
. .. . . -.—
-.-..—. ,—..
42W &ZoIW RPM
4ao-68arle
.*
“0
-18-
RF
tfthe Uslaxrent-~64mA
~rnoddemustbusad.
tfueinotwo4260s or426Ms, youaIeawuwof*
hmwxiiiny powsrhsWof ushgs41@7boPe~
-.
m
i
DRAW
WORKSHEET
1
V.
SYSTEM OPERATION
SECURITY
ACCESS
CODES
GENERAL
lNFORMATfON
The VISTA 4140XMPT System ●ltowa up to 128 (99 maximum per partition) saourity aceass rsdes to be assignsd, aach
identtfii by ● war ID number. In additiin, tha Quii Arm foatura oan also be Prograrnrnad,whbh ●nabbs the [#] k.y to h
proasad instead of ●ntoring tho security cod~ when arming tho syatom. Tho oodo must still ba ●ntorad when disarming the
syatom. Nota that OpwvCbso reporting of Ouii Arm is ●ablad it Lfsar2 is ●nabbd for Op@Cbsa raporting, and that Qu’bk
Arm mporta as Uaar O.
USER CODES & LEVELS OF AUTHORfTY
Each user of ths syatsm oan
L
be aasignsd various levels of
o
●uthority (tslls system what
1
systsm functions that user is
2
authorized to do), and can
3
have
different
levels
of
4
authority within each partitiin.
5
Use the “View Capabilities”
UU===
E 6
keypad function to view the
pa~iions ●nd ●uthority levels
for which a particular ussr is
●uthorized.
In highsst to
lowest ranking, these fevels
are 83 fofbwa:
B
Instsllor
fLevel 0}
Can ps~-m afl s~stem functions (arm, disarm, bypass,
etc.) and is the onty user that can ●ntar program nmda.
Enter program mod. and ntdw imrorammingchangaa.
●
- Change liiaownmda.
Add, Dolets,
Change MASTER,
MANAGER,
or
OPERATORS.
Selsof op9n/doa6 reports for ●ny uaar.
Oparats ● partition, but CANNOT DISARM ft arrnad bv ●
rmde othar tian INSTALLER’S mdo (iuding Oubk ~).
●
9
.
.
.
Maator (Lavsl I)
●
May cretto other usora of ths aystsm babw thii level
(Maator cannot assign anybody ● Iavsi of Oor 1).
●
Ohangshiaownooda.
●
Add, Debts, Changa MANAGERS or OPERATORS.
c OEankfoso raoortirw of ●dded ooarator users will BE
SAME ●s his own [&nablad or di~ad
as assignad by
INSTALLER).
●
Oparate ● partitbn.
Manager (Levoi 2)
●
Can-parform atl systam fundb~
(Ann, D-,
Bypa6a,
ate.) programmed by Maator.
✎
May create othor uasrs of tha aystsm bebw thii taval
(Manager cannot assign ●nybody a bvel of 0,1, or 2).
✎
MW changa his own coda.
✎
May W
DaIata, Changa OPERATORS. “
●
Opankfoaa raportingof addaduaaraWitiBE SAME as his
own (onabfad or disabkt u aaaignad by fNSTALLER or
MASTER).
●
May oparata ● partbion.
Operator
(LoWS
34)
fmvaat tavda of users.
w May operate ● partitbn with ona of the three OPERATOR
●uthority bvsts A through C tistsd in ths OPERATOR’S
CODE paragraph Iatsr in thii section.
●
Our@as (Lavol 6)
●
Oanarrn anddmthe
SYStan butaboaandasitant
duress moaaage to central atatbn (If aenrba is
concocted).
. Code is aaaignad on ● partition W partitibn basis.
Ganoral Rules on Authority Lavols ●nd changoe
To kaap thii atmduro manageable, the fofbwing rubs appfy
to uaara whan making modificationswithin the syatom baaad
on ths uasr code authority bvela:
●
A uaar may not debto or chango the user code of ths
SAME or HtGHER authoritythan which ha is assignad.
. A ussr may only ADD users to ● LOWER uthorhy Iavat.
●
A user may assign other users aooeas to othor partitions
onfy il ha hnaatt has access to those partitiina.
●
A uaar can only be DELETED or CHANGED from withinthe
I partitiin ha is ●ssionad.
MULTfPLE PARTfTION ACCESS (GOTO Funotlon)
To maka ● partitionad ●nvironmont particutarty uaafuL tha
syatammuat afbwforcertain paopfatohava acoaaatoothar
partitions. This ia particularly true in ths Factory~bs
●nvironment whare tha president of ths oompany wanta
aoosss to any area of hm company. Tha 4140XMPT has
w
fbxibilhy in supporting thii raquirsrnartt. On ● USER
baais, ●ach usar is programmed for ● baas partitbn (the orw
ha normally is aaaignad) and ona or mora partitbna which ha
oanbaauthorizad to~.
In ●ddltbn, within ●aoh partitiin, ●ach USER may ba
oroorammad to have different levels of ●uthorftv. For
;x~-mob. Usar #3. th. V.P. of Enginaarino. o&rld ba
usigned to work-within the Engi;ooring ‘baparfmont
(Partitbn 1) of ABC Manufacturing. Since ha naads tha hd[
capabilities in his area, ho is ●aaignad as ● MASTER with
Lsvaflauthority. Thiarnaana hsmay Arm, Dbrrn,Bypasa,
Add or Modii uaara in partttion 1. tt is atao ● raquiremant
that ha be abla to gain access to tha manufacturing ●raa
●ncy basis. You oan set thb up
(parthiin 2) on an ●m
aaailywtthths 4140XM 3 bynowrqusating thathsafsoba
aaaignad to partitiin 2, with ● taval of authorhy set &war,
auoh as Levah4 (OPERATOR Lavel B) whbh albwa him to
Arm ●nd Disarm, but nothing ●laa. Ths oontrol will
●utomaticafiy assign hlm tha next availabb user numbar
within partition 2 and doss not raquira reprogramming of Ma
afrasdy dating 4 dqit aaourky Oodsl This typa of Satup can
badonstoraaoh usarofthasystam and forarryoombindon
Ofuptospartihal
EXAMPLE
OF MULTIPLE
PARTITION
ACOESS
In the abovo ●xampfa, Uaar 3 haa MASTER ●dhortty in
parutbn landoPERAToR
Bauthdty inpartitii2.
Hi
wm-h_n2bU_rStiti4d@Mdktti
awn. for both partitbna.Acosaa to Othar Partitbrrs. Not.
mtia-rnu-rb~~~m-inam,ti
system WS autornaticattyassign an unuaad Uaar numbar.
Aaaignii users to othar partitions is ona thing, but how
about actuafly baklgaua
arandtry
ingto%aa”onaoftha
●shptakey
otharpartkii?
Tha4140XMPThasdevabpad
aquanos (ooda + ~] + partitiin numbar O-6, partith O
raturna to tha dafauft partitbn for that conaofa) aohama for ●
uaarto go to anothor -in.
-19-
/75
5
.
Once them, the current display baoomaa attached to that
psrfttiin and status rqueats, etc am now diaphyed for that
P@bnsu*a@=fo
f@-*e@eeswithmkay
wttriaa. To ratum to your orightal parthbn, YOUmay ●nter the
same key aaquanoa ●nd ●nd if with your normal partitiin
number or T.
You’re now ba& to where you started. ft’a
thataimpial Yournay viawthm operation as8bigsebctor
awkofrandyau aroatthaawftcii atthecOnsaIa.
EXAMPLE: User may be regularly ●ssigned to partition 1.
This would be t- default display for this user, howevar he
may ‘SOW to go to partitiin 2 for example. (Assumes he
has been programmed for aooass to partition 2) The user
inters hia normal aamsa code and the proper squonce to
select ●n@wr partitiin followed by the number 2 for partition
2. ~
dmay will now select partitiin 2 information for view
●nd further action. In the above ●xampte notice that no
aoeass is afbwad far thii user into partitions 3-8. Attempts
to access these partitions would be den”bdautomatiiliy.
INSTALLER
00DE
(Uaar #1/Authortty
fmml O)
●n tnstafbte Code rnitiaflyas pan of
The instafbr wrams
the programming prooedum, and thii -O
is the only oode
that parmtte -my
into the programming made (unless “98
has been pmvbusty usad to ●xit the programming mode, see
bebw). The lnst~br’a Code can also b used to perform
normal system functions.
I e AUU a maw.r, mmagm
Etierltir-+[8]+-Mr#+-M~do
The ayatam atso pmvidea an Instalkr Ode bohut feature,
which pr.vents the uss of the Installer’s Code from re●ooosaing the Programming modo ●fter the initial
programming. Thii feature is activated by pressiW “98 to
●xft Programming mod..
Tho only way to ●ccess
programming mode once this feature is aotivated, is by
~~
d
the aystom and powering up again, ●nd then
~bg-htha
”and#kaysattho
sama timawithin30
seconds of power up. ff re~ea
to Programming mode
using the Instafbr’s Code ki desired after initial progmmming,
then ●xit Programming mods by pressing “99. For additional
aoourfty, the inatafler code can be used to disarm the system
ortfyti ilwasuaadto armthasyatom.
The Inatalbr also programs tho master aacurfty oudas, whii
am the oodaa intended for use by the primary users of the
ayatent. Thamastaroodas oanthanbe usadtoaagignupb
99 bwor bvol cxtdas, which can be used by other users of
tis~m-~n?hanatib~titicr~.
Note that Opan/Cbse
reporting for tho Instatbr ode
is
●nabled in fwld %9.
Asaftippad fromthafactory$ theinitiaf kwtalfatimde&~
~rammed
(default. 4-1-4-0), ad oan be ohangad by the
kmtaffarb any cede daaimd (program fii WO).
coa.:
Console will prompt for Authority level. Enter the level
number as fotkms
1 = Master (Arm, Dbarm, Bypass, ●dd or modify lower
bval users)
2- Managar (Arm, Dm,
Bypass, add or modiiy bwer
level Usars)
3= OPSrator Level A (Arm, Disarm, Bypass)
49 Opsrator LOvalB(h,
Dm)
5= Operator Level C ( Arm, Disarm only ff system armed
with thii ode)
6- Duress (Arm, Dunn, triggers sibnt panic alarm)
Oonsolo witl than prompt for OpartKXose repoting option$.
Press O (NO) or 1 (YES). Oonsolo will also prompt for
●uthority of this user to access other partitions. Press O
(NO) or 1 (YES). If YCS, tha next partition number in
is
sequence will be dmptayad with ● prompt askktg if ~s
desired. Press O (NO) or 1 (YES). fl no, the next pdtiin
number witl be diied
with the “access desirti prompt. tf
yes. the system will ●utomatically assign ● user number and
will prompt for the amhodly bvol thm user should have in the
assigned partition. Enter the desired authorfty level number.
The nexf partitionnumber will than be displayed with a prompt
for access. When ●ll psrtitiins have been displayed, the
umsols will aomll through ●ll partitions to which aocass has
been ●ssigned, and will display the user number ●nd
authorhy level for ●ach.
To CHANGE ● Maator, Martagor or Operator oode:
Enter fnstalbr ~
+ [8] + User number + new oode for that
user
The system tit detect that the uaor number is ●tready
assigned and wftl prom@ Mthii is ● new uaar. Pmsa O (NO).
Theeystemwillthen tiithatthe
ohangoisatbwad basad
an authdzatbn bval. tfthauaar nuntber isthaaamaasthe
Installer’s, the system will prompt for the new code to be
reantomd. This prevents -idontaHy
changing a h~h level
oode.
~
Users #16 - #99 will ropoti as Usar ~15kHmogsbled for
~
uring user oode ●ntry, normal koy
IMPORTANT!:
dapasms
atotharomsotes
inapartitiin
wiftbeignomd.
However, panio key depression will oaues ●n ●larm and
tarminato user ●rrtry.
t OPE@J/CLOSE REP ORTING
NOTE When adding ●
user, tho syatom will only prompt far 6petibeo
report
~Wtith.WfsM~n9-&t*&r.Wna
Maetor or Martagor adds ● now user, tho now user%
OpOt@bOO [email protected] will be the same as that of the
Master or Managar ●dding the user. M Open/Cbaa reports
by the kbtor or Manager, the
amrequirad *ba@eotabb
fndaffar should assign two MaaW or Martagor user oodas:
one wffh Opart@oaa raporting ●nabfad, and one without
-2D
or upwaIor
-
To DELETE s BMtor,
Mattagor or Oparator ood.:
Entar fnatallerooda + [8] + Uaar number + fnatalkr cads
The system wifl promfx if thii -e
should be deleted. Press
o (NO) or 1 (YES). N yes, that user’s code will be removed
from all partitions to which it had been assigned, ●nd ●ll
wthorixatbn bvafs and other information about that user will
be delatad..Note that ● user can only be defetd from the
partitiin m whd n was first ●ssigned, ●nd can only be
debted by ● user with ● hgher authority level. A user oannot
delete hmseff.
TO
EXIT
THE
USER
CODE
ENTRY
MODf&
either
.,
MASTEWMANAQER
CODES (Authority
Lavolo 1/2)
Tha Mastar CXrdais ths do intwrdad for uss by ths primary
usars of tha system when psrformhtg sysfam functbns, and
can bs changsd by tho Master Usar. Ths factory dafault
mastar do
is %2-3-4. Por ●dditbnaf ssourity, thsMaster
Cod. oan b usadm assign bwar faval codas (maximum of
99 par p@tiin), which can bs usad by ~ndary
usars of
thasystamwho donothavoa naadtoknowtha Master_
w).
(supervisors, ●mpbyass, doaning Poraonnal. fa~
Eaoh user’a cod. oan bs indiiuafty diiinatsd or -ad
at aly tkno.
OPERATOR CODES (Autttorlty Lsvols 3=S)
Opomtors can ●rm ●nd disarm ths system to tha authority
asslgnad, but cannot sdd or modify ●ny user. Tha tabfa
Mow fiis tho thrss ●uthority Isvols. H Oparator Lsvol C k
soloctsd (somotimcs known ●s Babysitter cod.), that
opamto~ cod. osnnot ba used to disarm tho system
unlsaa tha systcm armed wkh that ccdo. This cods is
usually assigned to parsons who may havo tha rrasdto arm
and disarm ths system ●t specific times only (ox. ●
babystttar noods to oontrel the system only when
babysitting).
OPE NICLOSE
RkP OR TING: Not. that opsn/cfoso
ofths
raporting ●ablas for addsd uasra wa tha cams as that
master or manager adding ths nsw usar.
oPERAlOR LEVELS w AfJTHoRf’lY
%nctlons
Pormlttad
Lovol 17 MI*
Opsrmor Laval A Ant
3
4
IOPS rater Lavsl B Arm, DmnT
LavsltqAm,
Disafmonly ifafmdrdh
I s lopsmtor
Isamoaids
I
can bs usad
Master Ccdos ●nd ●ll fewer tavel tics
intorchangesbly when psrformiflg sysfom functbns withh m
psrtftion (a system ●rmed wfth a usots tompomry oods oan
ba disarmed with the Master Code or wrothor user’s
tornporary ~),
with ths excsptiorrof tho Operator Lovsl C
Code describsd Iator in thii asctbrr.
10 ●dd, chango or doloto ● Msna@or or Oparator
cod.,
follow tho samo prooaduros doscribsd in ths
INSTALLER CODE paragraph, substituting Master or
Manager cod. for Instatlor @o. Not. that ● MANAGER
cannot dobta, charrgoor add ancthor MANAGER.
‘-=+
I
I
I
DURESS CODE (Authortty Lavcl 6)
-dur--bamo~d-ndmga~titiba
csntral monitoringstation fftho usar is baii fomad to disarm
(or arm) tha systam under threat. This faatura is only usaful
if tha systam is oonnsctad to ● oontmfstation. Whsn tha
system’s Auxiliary Vottago Triggers ●m oonnootad to
●nothor communication’s madis (Dorivad Ch8nnafAong
Ranoo Radio). not. that duress is signaffsd on tha cams
trigg;r that tinals silant psnb (whoro~ durass has fts own
uniqus rapcrt whan digWy communicated).
Thadumssmda hasaignsdon aparfltiiby
psrthbn and oarr ba any ~
dssirad. When usad, ths system till
d~(tim),
tiWtisotia
@km-@
ti~tid
atatbn. Thara wifl ba no indication ●t tfw consols that an
alarrnwassant.
SETTING
THE REAL-TIME
CLOCK
PROCEDURE
T& :t&:&Em~he
[3] or [1] kay to change from ?
clock, or tho cbdr can bs sot via tho Oownbador scftwara.
10 ●ntor raal-tlma clock mod., prsss CODE + #63.
Thsd*witl
show
Tho-?=frldbatos thaarrrsnt rnoda. Tha[6Jkayohangas tha
mod. from DAY to HOUR to MINtJIE to MONTHto DATEto
YEAR. Ths [4] koy drangss thsmods in ravarss ofdar.
Tho [3] & [1] kays am USOdto sat tho T’t=ATE
vafucS.
Tho [3] ksy moves ths TIME/DATE ahsad, tha [1] kay nrwas
tho TfME/DATE backwad.
To act tha Urea: press [6] until tho 7 appears in ths
hours poshionothen usa tha (3] or [1] kay to sat tha hour.
Pmss[6 qdnti-ti[3]or[l]~*m~tinti.
Usaths h kaytosst AMor PkA.
Toatbti,~~[6]~uti~tio?~in
tha month @tbn,
than USCtho [3] Or [1] kSy to SCf fhc
month. P-h[6]*qti
ti*tbp]w[l]w*
satths dam. Prasstho [6)ksyagain andusathsp]or
[l]
kaytosafto sstthsyoar.
To ●xft ctook mod., press ●fthor tho [8] ksy or tha ~]
kay. Exfting wfth tha [8] koy wifl savs all changas. Exiiirtg
w2h tha ~] kay wii ●xit without changing any of ths vafuaa
(uSad Whan viswing tha timo sattings, but no Changes am
dasimd).
-21-
25
‘?
KEYPAD
GENERAL
INFORMATION
Note that if QUICK ARMise nabted (field “29), the 1#] key
oan be pmssad instead of entering the security coda, for
●ny of the ●rming prooedums (Away, Stay, Instant,
Maximum, etc.).
Thakeypad afbwathe usertoarm anddiaarrntha ayatom.
●nd perform other ayatom Iunctiona,such ●s bypassing
zonos, view messages from the oentml atatiin and disptay
zone descriptors. Zono ●nd system conditions (darer,
troubb, bypass) are diaptayed in the Dispby WI*.
When ●n afarm otawa, oonsob sounding ●nd ●xtomal
soundhg will oowr, and the zone(s) in abrm witl be diapbyed
on the corrsola. Pressing any key will sitonos the oonsota
aoundsr for 10 aeamds. Dsarming ths system will sibnce
both console and external sounders. When the system is
disarmed, any zorms that were in m dam condtbn during
the armed perbd will be dsptsyed (memory of atarm). To
ctaar this display, simpfy repeat tho disarm sequence (ontor
the SSOU~ code and press the OFF key).
Tho oortsobs afso feature chime ●nnunciation,
key pairs (for sibnt, ●udiile,fir.or personal
●nd 3 panio
●mergen~
alarms) which can notify the central station of ●n alarm
conditiin, if that servios is connected.
ARMING
FUNCTIONS
The folbwing is a briif list of system mrnmanda. For detaited
information concerning system functions, refer to the User%
Manual.
Dlaarmed
Not
Ready Before ●rming, the system must
be in the READY oondtiion (atl
zones must be intact). tf the %JOT
READY message appears, press
the READY r] koy to display
tautted zones.
Arming Away
AW’~g
Stay
At
-g Instant
A{ .ag Maxlrttum
Enter *+
Enter oode +
Enter *+
Etier mde +
AWAY ~
STAY [3.
tNST J
MAKfMUM~4].
SUMMARYW ARMINOWOES
Disarming
Bypasalng
Chimo
Mode
Zonos
Enter code + OFF [1).
Enter coda + BYPASS [6]+ zone
number. To automaticallybypass
atl fautted zones, use ~uick
Bypass” method: Enter csde +
BYPASS + [#l.
Enter cede + CHIME [9]. To turn
chime mode off, ●nter oode +
CHIME a@n.
PARTfTION “GOTO” COMMANDS(5137A0
OnfY)
Each oonaob is ●ssigned ● defauft partition for display
purposes, and will show only that parlitiin’s information. To
aee information for another partition, or perform system
functions in another patiion, use the GOTO command (ads
+ ~] +pa.@tiin nym~r O-6). The oonsob will remain in the
new parhtmn untrl directed to go to another partition, or until
90 seconds has etspaed with no keypad -.
-22-
FUNCTIONS
VIEW CAPABILfTtES OF A USER (5137AD only)
The conaob wiff displaythe partitionsthat user is authorized
for, the user number, ●nd the authority bvel for all partitions
authorbed. Enter arde + lx] + [r@].The user’s oapabiiitkw in
oaoh authorized partition will typioally be displayed ●s
folbws:
me users opanmoae reponcapabmy
is shown by the dot folbwing the
●
uthority favel. ff Open/Cbse is not
EzEl
●nabled for ● user, the dot will not
appear.
VIEWING DOWNLOADED MESSAGES (5137AD only)
Users may occasionally resrive messages on the mtsob
tfispfay from their installation mmpany. When this occurs,
the console will display ‘Message. Press O for 5 sacs.-.
Instruct the user to press and hold the O key to disphy the
central station’s message. Note that the system must be in
the READY state to view these massages.
USING THE BUILT-IN USER’S MANUAL(5137AD only)
An abbreviated User’s Manual is stored in the system’s
mmov, and -n be psrticutartyuseful to the end user if the
printad Users Manual is not conveniently acceasibb when
the user needs to perform a seldom used and unfamiliar
system procedure. Ths Buitt-in Users Guide is displayed by
simply pressing any of the function keys (e.g., OFF. AWAY.
STAY, MAXIMUM, BYPASS, INSTANT, CODE, TEST,
READY, #, ●nd CHIME) for approximately 5 seconds and
then releasing it. Abbreviated instructions relative to the key
that has been pressed witl than be displayed (2 lines of text
●re diapfayed at a time). This function operates in either the
armed or the disarmed state.
DISPLAYING DESCRIPTORS
(5137AD only)
The Atpha Conaobs an dispfay ●ll programmed descriptors,
which is useful to the instafbr when checking entries, and
can be helpful to the user when there is ● need to identify
zones. To disptay dadptom,
press and hokt the READY
key until the buitt-irt instructions for that key ●ppear, then
roteasa the key. The zone descriptors will appear one at ●
time. for ●bout 2-3 seconds aach. For faafor vWIW. Pfes$
the READY key to dthe next descriptor in numeriil
order and so on. When afl descriptors have been disptaywf,
the Oontrol wilf ●xif disptay mode. To ●xh display mode
bafore ●ll desoriptora have been displayed. enter the
aaourityde
andpressfhe OFFkey.
PANIC KEYS
There ●m three pairs of keys (1. + 1], [# + 3]. ~ + #]) ti~t ~
programmed, an be used to manually initiito alarms ●nd
send ● mporl to the cantrat station. Each pair of keys can be
indwidually programmed for 24 Hour SWnt, Audible or
Auxitiary (Emergency) responses. The panic function is
activated when the appropriate pair of keys ●re pressed at
the same time.
The panic hmdions am identifbd by the system as follovm
95
*+1
96
#+3
99
*+*
For 5137AD oonsolos, these panic keys oan ●lso bs
programmed with an a@ha descriptor.
IMPORTANT:
For the Panic functions to be of practical
vafue, the system must be connected to a oentral station.
TROUBLE
CONDITIONS
OENERAL INFORMATION
Tha wrd “CHE*
on tha Oonsolo’s diapiay, aooornpanbd
~am~~g~tk%nwb,~~.--oba
tmubb
_—— rnnditbn tn tha watom, Tha ●tdlbb warnhm sound
oan ba silamd by pmaihg ●y kay, Inatruoi uasi to oail
for sorvba Immadlatoly upon saaing ●y of tho fof~ng
rnoaaagcs.
“CHECK” MESSA@ES
c A display of “CHECK aommpanbd by ● display of w or
mora zono dasoriptor(s) indiiataa that ● probbm ●xiata
wtth thoso zono(s). First, dotormino tf ttm zona(s)
disdavad am intact and maks thorn SD U thav ara not. if
(Odeplus OFF) to dsar
the display. -
. A display of tha wrd ‘CHEC~ acmrnpaniadby ● numario
display of 897 indicates that a shotl ●xists on tha Polling
b30D ●nd mav sdiminatosome of tha omtaction. Fautt Vr
●
can” bs ssigned an ●lpha doscr~r
when using tho
5137AD resole.
. A display of tti WOmf“CHECK ~~bd
bY ● nUfnSfiO
display of ‘S8”, ‘89=, %O-. or WI= indioatos ● 4280
Racaivor problem. Faults %8”, %~ %& & ~1” can ba
●ssigned alpha daacriptors when using tit. S137A0
consofa.
CONDITIONS
A dlaplay of %OMM. FAiLURF at ths Oonaota hdbataa
that a talk
murrad In tha talophona oornmunbatlw
portbn of your syatam.
OTHGR TROUBLB
●
. Adbpiayof ’LO SArandazono_r,
m~W
byaonoapar mlnh-ptitio~hd~~a
tow battwy oenditbn axbta in tha wtrsbaa tranamittar
dia@ayad. Tha audbb wamlrw sound maY ba $Iian08d by
prassing ●ny kay. A display of ‘SYSTEM LO SAr
indbatos that ● bw battery conditbn axtata with tha
ayatom’9 kradtup battaryo
●
A display of ‘4280 SET UP ERROW at tha oonsoia
hdiithat
a42iB0-6raoaivar iabaiiusadhaaYs@n
with mora than 8 RF zonos programmed. if this b mt
oorraciad, non. of tho zonos in tho syatam wlil bs
~*=imHWm&mu~
8 RF zonas ara dasirad,● 4260
.
POWER FAILURE
tftha POWER indbaioriaoff,and
thamaaaaga”AC1._~
diiad,
tha C@nado is Oparatingon battaty powar only.
Chadt to ass that ysur ayatwn’s plug-in tmnafomr has not
basn~ntaiiy
pybdout. tnatructtha usartooafia
if AC powar oannof ba
asrvba WmSanWW immadiify
rastorad.
~
for tima ●nd data stamping to ooour, tha ●yatom’o roai-ttrno oiook must ba sat.
THE REAL TiME CLOCK aaotion for dotsiis.
Programing
GENERAL
lNFORMATtON
Ths system can ba oonfiiurad for tha foifowing .vanf bg
The system has tha abitii to racord various avonta in ●
activitk
historv km (224 want CSDSCihd whamin cacti avont is
●
racordd” k 06 of fiw- ca~~o$s
(alarm, A,
bypass,
To ●ithar raoord ●vents but not print thorn unbas
opan 6 system), with tha tima and dah of ks oocurronoa (if
wmmandad bdoso, ortoautomathffy
print thaavanta
raal-tima dock is sat). The bg may ba viswd (Dispby Mod@)
as thay amu (fiitd 1“72).
●
USiW a 5137A0 @la mnsob, oroan ba printad (print Mods)
Spadfio catogorias of ●vants to ba toggad oan ba
on a serial printer (connactad to tha ayatam via ● 4100SM
Ssbctivoiy anabbd (kid 170).
Sarial Moduia: soo 00NNECTOR J8 iNPUTS & OUTPUTS
c Thotirnaatmpcan tJaprogrammadfor aMwr120r24hour
saction for amnaction dataita).
brmata (fii 1“71).
Thaprintartmud mtacanbsaatto aithar3000r 1200bmst
(fiitd 173).
Diaptay Mod.: Enter OOD~~]
+ [8] + [0]
sat awnt tog t.hnddato raport ●nabia (fbfda 1*4O* 1*41).
Print Mod.” Enter CODE + [#]+ [6]+ [1]
Enabiaraporting ofavant bgoapac&y (b.50%fui180%
Ciaar Event Log: Enter CODE+ [#]+ [6]+ P]
full & ovarfbw) programmedinfialda1“406 1*41.
To
EXfT
Event
Lo
Mod.:
Press
*
at
an
time.
~;
In ordor
Rofor to tho S~NG
-23-
EVENT
LOGGING
DISPLAY
& PRINT
MODES
After ●ntering either mode, tho foUowingwitl be d~ed:
ENTER O. RECENT
The Event Log hotds up to 224 wonts, ●nd can display or
print ●ll wonts in ● oatogofy (oomphto), or only tho60
wonts in ● cawgory oocurring sinoa tho fast Clear Event Log
command (reoant). Note that ones the Event @ is Mf, the
oldost event will be ●rasod upon the logging of ●ny new
went. Prass the dosirod display mode key, O or 1.
~
The eystom afbws viewing of any partition’s event fog. Enter
tho part&ion number for the panition whose wonts am to bo
all partitbn’s events.
dmpfeyed. Entorirtg O(NO) willd-y
For dispfay and printing purpoeas, ovonta U. stored on ●
partition by partitii baaii (excepl aystam wants), and ars
9into fiie ategories as Mows.
Use tho [3] & [I] keys to eoroll to tho next or
Previous cateoorv suaons resoectivetw
Disptsys
for Sonesmet
dsrrnaheva
hevsaiUmrausaden
beonrosmradrnsdsctedpsrtMrl.
Disptoys timeldsm for Zonos -t
hsveausada 80uUsorsuporvisnw
ODn&ioninae
kctadparmolt
tino/dsts
DisPhYsdmeMa*
timf-tit
hsvsbeon bypassodinsefeow
partition.
Di8ptaya tires, dam end user
rwrnbar for cash ●rming ●nd
EVENT LOG
muw
I
IE5YzEl
disarminQof rho Systemfor be
partition~.
Displays thne/data for systam
probtams, suoh ●s AC Loss,
oommuniostion failure, ●tc.,
rogardiessof pufidon.
Db@Wdamofwsnkrn
ohronobgioel ordar, from most
-t
m ddost
10 dleDlav the wmtte In ● particular
oetegory,
mreas ~81 ~ the desired ceteaorv screen. ff in Diiofw
be,
&&tts witi appear one at ~ tirno fmm the most ra&ti
to the ofdest. Press [8] again b dispfay oaoh subsquent
event. ff in Print Mods, the first press of [8] will ceusa tho
printer to print aft ●vents in that category, with each ●vent
●utomaticefiy sorofted on the d~fey console. Tho foffowing
iss typical display
8howsburglsry alannoccurmdin
zono30fpudtion 8,st12.U2AMon
-1.
After the fast ●vent in the sdected category has boon
d~tayed, the foffowing wifl appear for a law seconds:
I
The
system will
●utomatically
return
to tho
RECENTtCOMPLETE selection screen dascrbod ●arlier.
-24-
CLEAR EVENT LOG
To otear tho Event Log, ●ntor CODE + [#] + [6] + [2]
m fdbwing will -kppw
~
Press [1] if Event Log is to be cfoard from momo~. Atl
wonts in tho tog will still be disptsyed if tho FUU LOG DUMP
option is sela&ted. Only those events oocurring from tho
timo of tho CLEAR command will b. dmpteyod if PARTfAL
diapfay option is selected. Press [0] if ovont log is not to ba
doarod et this time.
ft [1] b proaaad, tho foftowii will appeac
I~1
prw 1-YES
J
Press [1] il it is desired to dear the ovont log. Press [0) if
event fogisnotto be cloarad.
SCREEN
REOENT
lYPE
~
DEFINITIONS
f
Events sines lest CLEAR
Dmpkly s all events
Typo of event (Burg., Fire,
etc. )
Zono (awnect) number
User numbar
VI.
SYSTEM COMMUNICATION
2. Two message rounds are .Iiminatad by tho use of ●
SPLITIDUAL REPORTING
oheoksum dwh. Instaad of tho communbator aendhtg 2
Dual raporting(%1) sands W ropofis to both prtmwy and
ssoondmy phono numbam. Splft rsporting altowa ropma to b
divided betwsan tho phono numbers ~rding
to the fiifd’s
(1*34) solactions. Spliiual
roportlng can ba ●act6d by
●nablii dual repotting and ●nabling ona of the split mportlng
options in fiofd 1“34. ff optbn [1] is s6factad, di atarrns, alarm
mstoros and canoal ropom will go to both phona numbers,
whii atl othar reports wifl go to the saoondary phone number. ff
[2] is sebctad, opantcbss and test mossagaa wifl go to both
ohono numbem. whife ●ll othor reoorts will w to tha orfmaw
FORMAT
SPLIT
31
1%4
o
la2
ADEMCO HIGH SPEED REPORTfNQ
ADEMOO’a Hiih SpaadforrnattransmUadafa in DTMFatar@a
of 10 characters por saoond. Tha handshake frequanoy &
Hz fofbwed by 23oO H& and the kfaaoff fraqusnq b
R@orthgC+tbns:
- 1400
1400 Hz. lhs maasago cmntains13 dgtts as foftowc A4.digff
eunt
numbar + ●ighf channafa of zons informatbn (1-3 or
duress PIUS3-1S) + on. status channal whbh idantifii the
typa of ●vanta baii reported in tho ●ight zorw bcatbna. A
typial Hqh Speadraportwifl bekiasadoffin undar5aaconds.
O&nlWmghso
ouldhav60neotth
efo30w@toondnbrrx
ADEMCO LOW SPEED
AOEMCO LOW SPEED is a pulsedformatwhbh respondsto
81400 Hz handshako and kiss-off. and transmits data w~h
1900H2 pub bnos @ 10 pUISSSpar second (pps). A fypioal
by
message ~nsists of two rounds whd must bs tmffi
the racaiver. A ~mplete standard raporf consists of ●f&har●
3 or 4diiit acceunt number followed ~ ● ld~it alarm ooda.
Though 2 rounds ●re santj only the vafid raport k displayed.
[n expanded reporting, two messages are sent, two rounds
par message, the first bahg tha ~unt
number and ●h
me,tksmmwl~tiemodeb-tih
wasassigned. A complete expandad raporf consistsof ● 3 or
4-digit account number folbwed by ● I digit afarm oode, then
the alarm cx%feis repeated, folbwed by tho ohannal nurnbar.
E)(. Smrdard CCCC E whsrw &=rXk2
~
ExPandd
ycc:
Z-zonalDads
SESCOA/RADIONICS
●nd
in
tho
Standard
●xpandod
reporting
SESCOA/FtADIONICS
format is virtually tho sams as
ADEMCO &w Spaad ax~pf fortha folbwing:
1. ThahandsMwandkiss*ff fmqumoyis22cONz
2. Thadsrais8an4mit9sdwi611600H2fx4aamnas.
3. Thararaof rmsmissbnis20ppc.
4+2 REPORTIN@
numbar and ● 2A 4+2 report cons.bta of ● 4dqit ~unt
digit alarm code, or ●vent code. 4+2 raports oan be
accomplished either in ADEMCO Low Spead (10 pps), or
SESCOA/R.ADIONICS (2o P@ format.
In 4+2 reporting 8 uniquo 2digif code for ●ach zone is
reported. A 4dqir acoounf number followad by ● 2dwit oode
is sent, wham the first digit is the actuaf event such as in
ALARM, RESTORE, or TROUBLE, ate, and tha aaoond digit
of tho oodo reprosants tho %ona- share the worn ~ad.
(but not nacossarity ths actual zons numbar). Each cods in
itsaff is unique to ● sp6cifiizon6. ffdesired, thaadual zone
2digit
numbar can bs raportad by ●ntering the mrresponding
y~rn~t=rx.
zona 1= [0] [1]: zona S3- [6] m. A raporf
..
12S4
S@(%W~boa~
rounds per report, B sands only 1 round wtth a oheduum
digit ●t the ●nd. Doing this ●bo halpa in deoreaaing the
tinwlttalwa foraraporttobasert
3. The hmdshaka fraquency is 1400 Hz followed by 2300
HZ6ndthakiasoff frquo*k1400*
—rRoWt2RE61m.2oN2 a.
4+2 EXPRESS
ADEMCO’S now Express format providas tho ●m.
information u the&2 format, but with threa diffo~
1. Tho datm is transmitted in DTMF (Dual Tono MuttiFmquoncy, fcnown as VouchTono”. d m. ~.
of 10
characters par sscond). Thii greatfy dacreasas tha tfma if
takas a roporf to go through to c6ntraf atatbn. An average
4+2 Low Spsadraportmight takeasbngas
20asoondsto
Oomplota its raport but 4+2 Exprass takas Under 3 sacs.
“NOIE. Ctwvnfl wM-nthausarlDW,
A-Fif OpWCbs
fv-wm~
Ths status channal might have orw of ths fotbwing oondhiinx
1. DlfREss&OroumssPb
schsrswk6.150nty)
2.mNfNG
3. SYPAss(Forcblrlsb 1401ty)
4- CWSING
5-TRCtlJu(For~ld~)
6- ~M
~A~:
●AclQS6inctWvdl
●msAmRYirlchW0d2
•~TAWER&I~3
•~oNmhctmsnt4
7-~~~A~
~1.uq)
g.~~
Atypbafhqh apoadrsport may bokasfoffmw
l~Sl15s7(ti#l=ti_wtiti2d3)
LIMITATIONS
l.Whanuaing Adamoohiihapssd, mmanbartharearo onfyls
charmebavaiUfa, pbsadurasa ohannaLUmorathanlS
zon6aareb6ing usad*th6ywi9 hav6toahar60hsmWs.
2.WM AdaHiih Spaod reporting, channels 9-15 cannot
raporttmubfas
or~.
usethass
channalsforzonas
that
wffl
notraporf thesa oondhiins.
CONTACT ID REPORllNG
This is the onfy format that can identify ●ll S4 profadion
zonas by thair uniquo zona (Contaot) ID numbsm, ●nd
providos ● l-diiit avont quafifiar and 3digit, spacdbdy
defii
wont ~.whii
quickfy idOfltffiiStho ~ndiibn
baii mportad.
~
tDraportain DTMF (DualTonsMutii-Frquancy@ 10
characters per aacond) and responds to ● 1400 HZ fofbwad
by2300Hz h6ndshake,6nd a1400Hz tdssoff. This form6f
also US6Schadcsum instead of tww messago vorifbatbn. A
~
mporf takes undar 3 ●aoonds.
-lDRePortiqtakaa
thaforrrr@ OCOOQEEEGGZZ
wham
mo
z
-
Cuaamar(sukrbar) nwnbsr.
EvsruQ&iarowhom:E-lw9&rllxJ&as10rs
EwrMoods(2haxadawMI
tionmsnsxtpags.
“
Fmmnrssnbsr.
zmwommdforusnbu~
hedwrn(ool~
orussrnunrbsr(oo1470)
torop@0bsersporm.
Sysmrrr
Srnsssaoss
(AC@s&W* lest, sk)
oonmnZsroaSintlazzzbmaOn.
(3)
-Es9/
1
TABLE
OF CONTAC
Codo I DofUrltlon
IlO
IFm Alarm
- RF
vision
Ir
II
BfV
knr
J
WBurg181y
--- –—
.-—
I
I
rtAlarrn
nuxiliary
**
{
r-.
409
4f 1
441
, . ..JmAiarrn
“B
{
u-
i
570
601
602
621
622
623
624
626
lKwsw
! call be%meqlr-3aterI ArmedS1rAv
Bwass
I
Manually Trigqerad Test
Periodic Test
I Event b Reset
I Event Log 50% Full
I Event Log 90% Full
i EventLw Overflow
Time~ate Reset
I
ADVtSORY: Adamda new Contact tD reporting is capabfe of uniquety reporting all 64 zones of information, as well as
685 receiver using software bvel 4.5 or
openings and cbaii
ti afi 128 users,@ oerrtralstationsequipped with the Memo
higher. 685 software fevela bebw 4.5 oannot ●upporf Contaci ID reporting. For information regarding updating the 685
receiver, amted Adontoo’s Teohnii Support groq at 1—80&S6-7492 (NY) or 1-800-458-9469 (CA).
4140XMPT
COMMUNICATION
Contaot
No ●ffect
or ●xQanded
Enables alarm restores
Add cheokaum digit
Define -es
and
selects 4+1 or 4t2
Dofiis atarrn went
Ooda
“79, ’80
“49
“81, “82
56, ●
59,
“64, ●
“61. ●64. “66.
[“69: “71: ●74.
PROGRAMMING
High
No effect
ID
GUIDE
Speed
No ●ffect
No Offact
Enables ●larm roatorea
No effeu
Iatdigit ●nabba raporl
wit la non-zero
i%atMas ramrta
Enabfos alarm restores
Add checksum digit
let digii enablae report
it It is non-zero
haions raoortino ohnl
ti-~f ~arootia
.
i
Ireportrlg
I No ●ffact
I
I
No effau
I
Enabbs report
“50
SaaooatRad”smow
selects fKOd digit time
inatoad of fried
NOTES
fbta: Low speed win
not send 3+2
ntaaa8ges. Zone fD
dgit is suppressed.
-26-
Enablesrepmt
W. Alarmchannel
nwst be programmed.
(01-15)
.–
.
‘1
)40 ●ffect
No ●ffect
disirad,
ifntuafba
* &o&fary,
if must
be used for primary. ~
used on primary, any
~fonlmucnab
w.
usadonfJoth prirnuy&
aeamdary phone #a.
Express
No effect
No offecf
Enables alarm restores
No offad
Define odes and
selects 4+1 or 4+2
Dafws alarm event
code
I
I
I
I Defines code and
aelaota 4+1 or 4+2
I
Enablesreportand
sebota let d~it of. the
24igit event ode.
I NOTE: No reatorea
if event not sent.
No effect
I
I
VII.
PROGRAMMING THE SYSTEM
GENERAL
GENERAL
PROGRAMMING
PROCEDURES
lNFORMATtON
Review the global and specifii partitioning Isstums Iited in
the GENERAL INFORMATION esction of thii mmmi More
~amming.
Theeyatam isshippad withasetof prs-progmmmad vatuaa
that aro designed to moat tha naods of many installations.
Thaaa an ba ohangod by ths inatafbr to suil apacifii naeds
if dosirod.
In ●ddition, four sam of pro-programmed
oommunioation dofautt values can dao ba badad by ths
instalbr, ●ach sat designed tor ● specitii communbation
format. Thoea too can be ohangad to sutt tho nsads of 8
particular installation.
Chsnges to these pm-programmed
values can b.
programmed directly from the console (5137AD onty) or from
an IBM compatible computor terminal ●ithar mmotdy (using ●
HAYES 1200 SMARTMODEM) or at the job sit. (using the
4100SM Sar@l M~uio). Both rnothods use tho 4130pC
Downbading softwsm (be sum that the software vsrsion
used includas s 4140XMPT menu election). Soe tho
DOWNLOAOING sactbn for more information.
For ●lpha oonsolos, Engfish Language descriptions of ths
zonos and ● custom inatafler mesaago (whii appears when
the system is ready to arm) oan be progmmmsd using ths
built-in vooabuiary of words (sss 693 MENU MODE, ALPHA
PROGRAMMING paragraphs tatar h thii asctbn).
USER-FRIENDLY
ZONE, DEWCE ~ ALPHA
PROGRAMMING
(669 Menu Mods)
To help set up ● partitioned ●nvironmonf qubkfy ●nd
accuratoiy, Adom~ has providad ● tmmandous * to ths
programming prooaas. Inatoad of tha traditional msttrod of
programming ●ll tho fietds assooiatad with zonas and the
partitions thay ●re associate with, you may now fogiity
program ● zone for aft tts charactoristii se promptad by tha
4140XMPT (mfor to tha #93 MENU MODE aaction for dataits.
This ensures that you assign ●aoh zono to a p@tion and
that a zone rasponso type has bean asaignod.
Thb user-friendly schamo for programming aliiinafaa the
possibility of you forgetting to ●ntar ● fii pmparty or simpfy
forgetting it attogetharl The system can now ba programmed
the way you approach your insfaflatii,
by zonaal
This User Friendfy Manu Mode can afso be uead for
programming remote ~nsota chamctaristba, and tor
●toring alpha desufptom.
COMMUNICATfON
DEFAULT
PROGRAMMING
Thor. W. fiio sate of pra.progmmmad dofautta ●vailabb
(on. standard, ptus four diffemnf oommunbatbn dafaufts).
Anyonsofthaaa
oanb9toadad intotha syatom’snwnory.
Rotor to the COMMUNICATtON PROGRAMMING section for
instructions.
PROGRAMMING
STEPS
1. Enter Progrsmmlng mode (5137AD only)
Programmingmodscanbaantarad inonaoftwo~
1) Byd~~tir]ti
[#]k~athmttitihh
30 seconds after powsr is apptiodto tho ControL
2) By keying the inatallar oodo, folbwsd by doprsssbn of
CODE+ O+ Okays. ~ol*ryinstallsr*
canba
--htiPWm*”
Immediately followhg ●ntry into the program mod., the
foltowingwitl be d~ad
on a 5137Atl
Program Mode
●Fflf#viaw-oo
Following the above display, the syswm is ready to bs
programm~ for tho communication format pammoters, or
accept data ●ntrias.
Dafaulto
2. Sot Standard ●ndlor Communloatlon
Rak to the PROGRAMMING OOMMUNICATtON DEFAULTS
section
for further instructions if on. of tho four
communicationdatautt programming sate is used.
only oonsoba
NOTE: tf standard dafautta ●rs to ba Mad,
withanaddmaeoto003willba snabbdAmwotswhhona
of these addmaaas must be uaad to program fha system.
3. Frogrsm data fblds for syatom paramatsra
Program afl gbbsl programming fiilds, including phons
numbsrs and aocount numbars, as well as ●ny other
programming fiitds mquimd b oustomKo the system to the
noads of tha installation. Not. thct program flolds
soktlon)
●nd 2“00
1 ●26 & 1“27 (RF dovlco
(number of partftlons) must ba progrmnmod.
When finished, program atl parfftbned programming fiitds by
entering ● part-tin spacitii tiitd number. Rspaat for ●ach
partition uead in the system by preesing “91 to sotsct the
next partitbn. Rafor to the PROGRAMMING DATA FtELDS
aaction for spaoifii oommands and inatmctbns.
4. Uaa #63 Menu Mode for zone programming
RafartotheZONE PROGRAMMING aactbn b programzone
r~~
~,
~ign rigflf bop ZOrwaSlld wireless ZOnSSO
and assign zonas to partifbna.
S. Uaa 663 Menu Mod. for dovlos progrmnnlng
Rater to the DEVfCE PROGRAMMING aactbn to assign
mwob ID numbers and dsfauft partitionstor aach oonaota,
and to Sebctivaty Suppress CsrtainOonao& Soundii.
6. Uaa #63 Menu Mod. for programming ●lphc
doaorlptors (5137AD only)
Refers the PROGRAMMING ZONEDEBCRfFTfONSsection
to ●nter zono ●nd partition descriptors ●nd ● custom
inataflar’s meaaago.
7. Exit Programming Modo
Exii programming mode by pmesing aither ’98 or “69. A
Seoondontryof”w
israquiradif
thaixitisba ingdonafron
tiitis l*o0 and above. To pmront m—acosnb Progmrnmfnf
modousingtha tnatafbr%ooda, usa”66. Thaonlywaytor*
~Pmgramming
modOisbydapmaaing boththar]anc
[#] keys at tho eamo limo wtthin 30 saoonds of power up
Exiting byuaing W9ahvaysalbws mantryinto Programming
m~~~
~&~
cads. Eiihar way of exkii wil
m.
-27-
263
COMMUNICATION
GENERAL
lNFORMATtON
To hafp ●xpsdite ths installation, Monm has fnmpomtsd 4
difbmnt communbation defsutta in tha ViSTA XMPT Control
(Low Spaod, Momoo ExPrass, Momoo High Spaad &
Adamoo’s naw ~
ID). Thaaa dafdts ●utomatiasily
program industry-standard ode assignments for zonos,
keypad panics, non-alarm and Supervisory Conditions, and
can bs foadad ●t ●ny timo without dfocting nonmmmunbatbn program fmids. lMng thasa dafauita savas
programming tirnal Attor bading ons of tha oommunioatbn
dofauits, you only rmad to wiro tho dovbas to their
appmpr@o Zonaa, and program tha fofbwi~
“Csntrsl,srationphornnumbsr(s),*m&%
. SubsonWs~nt
numbsr(s),ti
%2*W
“Zxletyps ~,
flaW %2-W t lml-lm6
“Dshys, tirnsom, mdmkdmsou s mm options.
The systarn is then oparationai.
LOADING
COMMUNICATION
DEFAULTS
Ones the Programming mods is ●ntorsd, clam ths syatsm’s
rnamory by pmsa~ ●97. Thii ●nsuras ●il program fwlds am
sat to their fuaory sat, pm-progmmmsd vafuaa. if dasirod,
toad ona of tha mmmurkatii
dofautt programming ssts by
94), than
first changing fO tha 1“XX sat of fialds (pr.as ●
omering ona of tha following fisid numbaw
TABLE OF DEFAULT PROGRAMMING CONUAND6
EFAULT
RAMMING
~0= LOAD THIS
PRE=
I
The program fiaids that ●ro dfaotad by badhtg ons of ths
commurtioation dafaufts u. fiaids “46 - “62, Default vaiuas
for ●ach communioatbn da@utt am iiatad on tho psgo$
following tho Programming Format tha ●nd of thii manual.
For detaibd information about raporting formats, saa tho
SYSTEM COMMUNICATION saotion. Aftar bading w dtha
dafautf SOtS, proooad to -M
tha aystarn data fiaid$ =
daaufbed in tha PROGRAMMING DATA FIELDS aadion.
flELDS
EASY=TO-PROGRAM
COMMUNICATION
Tha ViSTA XMPT programming schamo oiiminatas ths nssd
to program zonas to ohannaia, and than ohannais to oodaa.
tf programming ~mmunioation fiaida manuafly, s“knpfyantor
whamvor oodo (3+1, 4tl, 4+2 or Mama
Expraas) b to bs
Sam for oaoh zona (including panics, non-alarm oocfas ●d
suparvbory oodas). NOTE: Entar “Ir to transmit an ‘A-,
Whiiappaars aawattharaaivar.
All zonas ●re saparatad into groups of 8, with oommon
raatom, troubia ●nd bypass oodaa for ●very 2 groups (16
zonaa). Thare am 2 doubiadigft antriaa for ●ach ooda. For
3+1, 4+1, 4+2 ●d Adamoo Express, W firsf •~ry k ths
atarmoodsfora standadrsport. Thoaaoondantry iattwlD
digit for an ●xpandad 3+1 or 4+1 r.port. or ~r ● 4+2 ~
Adamoo ExprassrapofL lffhasaoond digii@O, ~3+lor
4+1 (or 4+1 axpmss) non-a~.$
~i b. ~
numbar fistd,
if only tins d~ita am ●ntomd in ths -unt
ths ID or sacond dnita am igti,
ff m~.
*
Ad.High Spaed format, tho first digit retry fs ths ohannoi
aaaignmom for that zone, and thasamd dwitisignoradif
●ntamd. For Contaof ID rapofiinfi, th. first diih .mIY (non zero ●mry) onabbs reporting for that zono, and tho
aocord digit is ignored.
-28-@ontlnwdonP
eoss)
PROGRAMMING
NOTE: Rastotii mprms for ●n went wlli not bs sant ff ths
ovont itself is not ●nablod, won il ● mstom code is
pqrammsd for that went.
ENABUNG
OF DtALER REPORllNG
BY PARTtTION
in order to onabis distar mporta for ● partition, ●n account
numbsr (fiiids ●32 & “90) must bs programmed for that
nurnbsrsst for
psrtifiin. Ths Controi is ahippsd with ●n ~nt
partftiin 1 onfy (sat to FFFF). Partitbna 2-8 have no aouwnt
numbs ~mmmad.
In ●ddiiion, in ass of phons fin. taiiuro, the ‘COMM. FAIU
rnasaags wifi not ba diapisyad in psrtitiina whbh do not have a
pfifn~ acaum numbsr programmed.
SUMMARY OF DEFAULT CONSEQUENCES
LoW Spood (“94”80)
faading tits default doas ths following:
●
Saiacts bw apaatf, standard format with no chscksum, for
both phons numbsrs.
●
Assigns ths fofbwing raporf codas:
03 for zonss 2-47
01 for zonss 1 & 46-55 (fro zonas)
02 for zones 62,63 (panic tmns), & %, 96.99 (kPM*)
09 for ail alarm raatoma
●
Enabisa ati zons typs tmtoraa.
ADEMCO
Exprooa (-94”81 )
Loading thii dofautt doss ths following:
●
Ssiscts Mom= ●xpmsa raporting formatt *
*urn*
tor both phons numbars.
●
Raporloodaa forzonas 1-64, 4260s and kaypadpanicsars
asnt as thak raspsctiva zons iD numbars (01-64, 88-91, 9599), Durosa is sant as QD”. Aiarm ratirs is %“ + 2nddigif.
●
Enabias aii zons typs MOMS.
ADEMCO High Spaad (’94”82)
Loadii his dafauft doaa ths Mowing:
. Salaota Adamoe High Spasd formal with no chackaum, for
bdh phona nurnbsrs.
“ Rsportingis8saKPd*ti-*mk:
channstlforzonss l&46-85 (Fiwozonss)
channsi2forzatas 2-6
Channa13forzonsa 916
channai4forzonsa 1744
Channa15forzonas 3247(RFintarbrzonSS)
Channsi6forzonsa 66-61664
Channai 9 for zonas 62 & 63 (panic transmitter)
ckti7*tia(m689)
6p**ti@7)
Channs18fOrfirSt42if0 @&91)
Channais 10,11 &12 forkaypadpanba
95, 96&99
raspoctivefy
●
EnaMaa afi ZOnStypa rSStOMS.
●
Enabbs DUmSSto bs aam.
ADEMCO’S Contaot ID (*94983)
Lo.adirrgthii dafauit doos tha foiiowino:
●
Saiscta Contact to format for both phons numbsrs.
●
Raporting is ●nabisd for all zonas.
●
●
Enabiss attzona typs MStOMS.
Rafor to ths SYSTEM COMMUNICATION saction for went
cods dafhitbna.
4140XMPT
PROGRAMMING
FORM
Rdor b ths InsWMion Instmtm“ % INDEX OF PROGRAMM It@ FIELDS for numofical list ol program fislds.
Sti2?d
d.t2Utt V21u2g2?s shown in H.t2
[ ], othorwiss d.tautt. 0.
FtiskwrIin
Wan
bSDIOBwmO$U&IW
#IS~MSIXI~.
ind~o ~ttiorsncesfmm 4140xmp orog
round ● fti-nuhr
“00
NsTAILER mm
*4mo.s
tmo]
ASS!G N RESPONSE
●O2
●O8
[-l
TYPE FOR ZONES
●O4
● 0s
(“1s) KEWCHASSIGNMENT
Enwmh-~bwd,14,~]
(Enter
l~ol
c1
00-10: sos R..DOnSO TvD@# box bdow)
f ●OS “
1“02”
1“Od1 ●OS
SYSTEM
MISCELLANEOUS
OFTIONS
TEST TIMER
❑ l~~tikW’tiU
❑
“21
DISASLEF*TIME~
❑ [lmblohodiaabb
(“25) BLJRGMRYIRIGGERm
ZONE RESPONSETYPE8
●41 EOLR DISASLE (Zones 2-8) ❑
tiaR
~
Mbowtila1 ●46 AUXILIARYOUTPUTENASLE ❑
●14
ZONE9FAST~RESP
“26
ldDWNO@fC&IWMIUOIU]
●27
~
●3O
1 ●33
~
w@c ~
lWCN-mE
OR ROTH
loTouchT~ [~]
ML
“83
TOIJ(X+-TONEWMOTARYBACKUPENU
TESTFEPORTMERVAL
1~1
2“m -m~~p
ml
~]
00-= ~ -.
.
❑
(980) RESTOREREPORTIBUFJG
~:1~=~--
“31 PASXACCESSOODE
m.oaw(11-12)
❑
*W-U
m
~=’TWPOIWTktE
oom~s..~
ooLmdl~
❑
•1
lqO&(noRpalWnIifqoeluf9pMrl
-momluy8@nwbl
Enmrmwvalm
km, W1-lWOObmmpm [024kb024brU
[ldt.ca~
l~til
OPTIONS
IN7ELLGENT TEST REPORTING
mmmm
1~,~]
●33
●34
“42
●43
●45
848
’47
●46
“53
●4@
STAND~ANDED
❑
onclcln
pRo82ypa98
.-
REPORT FORSECONDARY
.TluqllW191.talf
.
Ba
_.
9s0
●3S
“36
“37
●44
PARTITIONED
SYSTEM
(2”00) NUMSEROFP~
PROGRAMMING
•1
211ar14 [1]
FIELDS
(2”19)
usEPARTmoN
oEsoRIPToRs
n
~~
1~
40L]lllj4611111J
~
OR RF RCVRi
& PANICS, & TNEIR SUPV. ~ RES70RE CODES
[All -OS default to 00]
74 CODE 75 ID
●78
88~1
ml
[-l
-Rm.
Glow
Lwsdtay
bw%
AC b
ACTest
Prog.Tamp.
q
I II
I J(*+8)
ZONE TYPE RESTORE EN BL=
●7B
ZONETYPES 14
❑
ncloclcl&l
1
2345078
OPEWCLOSE
REPORTtNG
1~~1
(“40)
1“40
❑❑
KEYSWITCH
STAY H
1“41
-mD*R
Tii20tor2vortt
bgro8st mm
Evonttog50% &SO%tulI mm
Event ~
+
OVOffbW mm
d%?l
ldrmblDbY221m~*mmm
(1*71)
M
10
@
FOR
❑
15m
mmm
mm
GIGI
mm
mm
mm
mm
mm
mm
I=ofublo:
p-dhabto]
*Eb”’O
OGGING FIELDS
%VENT
(Raal tl~ ctook must h oat-do
(1”70) EVENTLOGTYPES
●82
●81
ms)m
1~4t+0LJRWST-~T
n
(0-12lwr~ 1-24
ha#
(1”72)
EVENTLOGPR_R~UK
~h
1~
(1“73) PRtNlER6AlJD RAIE
c1
c1
la
*1200]
767
PARTITION-SPECIFIC
PROGRAM FIELDS
thispaga lorthe partitions used in the installation.)
(DufMcatO
field rnmdw.
To progmm thssa fialds, enter a partitiimspsclfii
To select ths nsxt pmtltlon, press ●91.
fl.ids,
press 999.
To mtum to the globsl progmm
PARTITION
#_
PROGRAM
PARTITION
FIELDS
EXIT DEtAY w
●11
ENmYDEtAY#2
●12
ExtT
m{
GI
“lo
EXITDEtAY *1
[
pq(OMsiffU81500wrle9)
’11
ENTRY-Y=
(T’lwoM56mumuuldB)
“12
EXITDEtAY 62
ml
ml
“13
HSouNDERmm
m
ol.ls Em$2MMJW8Io4].WlhlUn4rlWM
msfnfLL.
❑
“16
CONFtRMATtON OF ARMtNG DING
ldlMo; foddllOl
DEtAY 62
“33
“16
CONFtRMA”
OF ARMINGDNG
1~~]
“22
“22
“23
●23
●29
●2S
●32
PRtMARY SUBSCRIBER ACCT #
cZlm
Enor-:
●39
INHIBIT BYPASSOF A ZONE
‘m
0141; loowa9zam@
(OmBptF&ozamOO)
mnbo@pmt,dJ
●SS
ENABLEOPENCLOSE REPORT n
“3s
●B4
m
*S5
•1
[1—mmhJO@mbopa
●8S
BURG. AIARM COMM. DEtAY
1.16 ~
&moo@]
ENABLE PERM. BACKLBHT
n
$~loa-kl
1“45
ENABLECONBOLE n
t~,~l
ANNUN.DURNG EWT DEIAY
1*47
la:~]
ENABLECHNEANNLN.
ON EXERNALAURMSOUNDER
1*S2
cANcELREPoRTFEsTRICTmJ
l-~mMT~~*]
2“18
❑
ENABLEGOTOFORTHLSP~
l~;
[~1
SWINGERSUPPRESDN
115k
MNtbow[~bruL.
ENABLE DL4LER REPORTS
FmiJy$luREss
sEwNDARYwsscmERAczT#
mmmm
W (11-1S) [1S1S1S1~
❑
c1
n
D
REPORT
●S7
●9O
EHiNilD
1*43
ENABIE OPEWLOSE
●SO
1~1
“@o SECONDARY SUSSCR@ER ACCT#
Ew~.
NHtBtTBYPASSOF A ZONE
ol.ls&mna
“85
@s](W15 WINS15UUlnd8]
[15lS151~
FDR NSTALLER CODE t-
swtNGER suPPREstoN
ENTRYWARNING
]RWWs-15~)
oi-sl:loolfd-@mwlFkOzonu)anbbYPundl
01-lsdmm [la, wabowr( dnwod)brut..
“87
I
PRMARYSUBSCRBERAccT #
mNiHilml
Enm~HN1.lSl
DD
w (1$-151 [151s15lSI
FUR tNSTALLER CODE ~~~
●84
FIELDS
P31m@15-1$~)
lill=let*-,s==@@
ALARAmsouNDERDuR4TmN
“38
PROGRAM
●OS
m
“10
●32
#_
❑
K=IIOl
ml
❑ KHJcl
9S
9689
DuNss
PROGRAMMING
’94
●99
KkY COMMANDS
Nextset of Iislds
Pravious sat d fiatdsor ●xit Urogramming mods
’91
“03
●D8
Salad naw partitiin
Entar Zona/AlptrStDaVioaP mgmmming mod.
Exit programming mock with installarIock-oul
GLOBAL PROGRAMMING FtELDS
Ths global(i... non-partition spaoific) programming fiilds am
groupad into thrao sata (or “pages-), as raprossntad in tho
diagram bslow. Tho first sot is aocasssd as soon ●s
programmhg mode is ●ntard. To ~
tha othor ask of
fialds (indicatad on tha programming fom by ● ~“ or W in
front of the 2dqit field •ddrc~), pru
“94. Noto that the
alpha consoles display the wrds ALT PROGRAM MODE to
indicate tho higher sat of fmlds. To rstum b ths pmvbua sat
of fialds, pmaa “99. Whan progmmming data fmlds, ths fwlds
fbtad in th. tabls in ths ZONE PROGWMING auxion an
coda + [q +
[0] + [0]
“94
tsantsr
~mlng
msda
●94
1
●
9:
(gbbal),
and aoms oan bs difforsnt for aach partition. Liatsd in ths
tabls bsbw am tho apacifii fmlda that oan bs dafii
for
Oti parthbn.
To
●poclflc fields, ●ntor ●
pmtltlon
spoclflo flald ttumbar (ox. %9). T h ●
sooosa
parfttion
dmwfUprom@fortha
daairadpwtition numbsr. Oncsths
partitiin numbsr k antorad, tha partitiin -i
fmfds for
that oartitbn osn ba uroorammad. Whan rnmofotad, prssa
I
Prsos W
Prss. W1 to oalsot nut pmthlon.
to rstum to tho olobal prsorammlno ffstds,
in sddabno xonaa and mnaolaa mustbs assignada dsfautt
partition by using ths #93 Msrtu mods. Nets that ●ach
ansola an ●bo bs indiviiuafty programmed b ●uppmsa
-isarm
baspa, Sntrylsxtfbsapa and dtirns mods bsspa
w**~3-w.
TM*k*pmvant
unwantsd
aaundafrom d-ussminothsr
arsa$dttto pramiga$.
k.
t
●99
\
PARTITtON PROGRAMMING
Vafusafor aoma programmingfidds am ayatsm *
ThspaWonad programmfngfisMs am~aldpp8d
when programming ttm gbbat fiifds. To aoaas thoaa
_m~fi.kblpmsa
Wl. whkhwfllprorn@ you fofth8
partitton nurrtbordaaikad. Aftsr afl fii
h that partkion am
pmgmmmad, prsas ●91 to program ttta naxf partitiin’a
pamnafsm RapaatforsllfMkbrts
uasdbtthaayatam,
PARTfTfONED PROGRANMI
●go
m
DATA FIELDS
I
“121E~
I
To program spacl(k data flaldq pmas [*] pfuaths2dgit fmld addmas, than rnalw tha mquiti •m~lti
wnaofa
will hasp whorl ● fistd has ban amplatdy programmed and
diapfay tho next fidd in ssqusnca.
will ●utomatically
Partitioned programming fields ●m akippsd (mfor to
PARTlT1014tt4G PROGRAMMING paragraph). lf tha numbsr
of digits that you ●ntsr in tha data fwld is lass than tha
maximum parmittad (CX. phono numbsr), ths oonaola
data
displays tha fast onfry ●nd waita. To prooaad, tha fisld to ba progmmmad must bs ●ntorad manuafly (ox. praaa
“05).
To vlsw tho oontsnts of ● data ftsld, pr.ss [#] plus
tha2digit fiofd address.Ths fiild’s ●ntrisawillbs diapfaysd,
butnocharrgsacan bsmads,
Wnv
m..
*
-1 Av
In 0sss of ●rrora: tf ●n ●ddrosa is impropsrty ●ntomd,
tha conaols will disptay FC. tf ● program ●ntry is impropsrty
ontorad (for oxampto, ● hrgor numbar than that whii is
parmttkd), tho mnaobs dwitl go btank. In ●ithar asa,
simply m-ardor tha oarract numbsr.
(OonlhMdkwsa)
-2s-
24$’
#93
USER
FRIEN DLY MENU
MODE
GENERAL
INFORMATION
#93 MENU MODE KEY COMMANDS
Aftar prografnming afl aystom ralatad programming f~lda in
rlmskkm!rnods
tha USLMIWay, PMSS~
tO displayths firstChO& of ths
Press~ haveoonsolsaccspt ●n~.
t 1 3snmsumk@y.
1;
thrao rnonti driven programming functions, which am: Zons
@ups @ nsxt scraan dmplay withoutcharromoembnn
.-1
I M*
Programming (for programming zona typas ad assigning to I
0
lpfo Sstoanswsrrdo
partitions), Alpha Programming (for progmmmirrg ●tpha
1
Pmcc m mnYES
doacriptors) & Dovioa Programming (for programming
console Charaotoriatioa). Pmas O (NO) or 1 (YES) in
Scapsstrom Illanu Inoda, bsok into fieldprograrnminq
raaponaa to tha aaluakrn. Prassing O will display tho naxt
-1
llllLMh
choba in squonca. Rater to tho ZONE PROGRAMMING I
section
for
instructions
for progmmming
zono
chamctariatii,
tha DEVICE PROGRAMMING section for
NOTE: Tho following fields should ba preset baforo
instructions for programming ramoto ansotas, and the
baginning: 1“26 First RF Expander; 1●27 Second RF
ALPHA PROGRAMMING ●action for programming ●lpha
Expandoc %00 Numbar of Partitions.
doscriotors. lha fii of commands uaad whila in tha menu
modoisshown attharight.
I
ZONE
PROGRAMMING
Tha foll~~
fislds can ~ programmed by using ths ZONE
--------
w
I
DEVICE PROGRAMMING
. . .. .
.—
1. E~or Pa-ramming mode, then press #93 to display
‘ZONE PROG?. Press O (NO) to display ‘ALPHA
PROG?”. Press O aaain to disolav “DEVICE PROGY.
Prass 1 to enter DEVk2E PROG~MING
mods.
IMPOR
TANTt:
Noto that bofom
chamotoristica, fidds
programming
zono
2.
Enter the 2-digif console ID number as set by its DIP
switchas (01.31). Press ~] to aceapt entry.
3.
Select the typa of consob, ●lpha or fixed-word, as
promptad (01.afpha; 02.fixad-word). Press ~] to accspt
●ntry. Entering 00- console not usad.
4.
Enter tho consofa’s defautt partition number (01 to
mdrnum numbar of panitiins programmed for system in
field 2“00). This is tha primary partition for whioh the
consols is intendad to ba usad. Press ~] to accapt
●ntry.
5.
Enter ● numbsr 00-03 for tho oonsole sounding
suppression options dasirad for this oonaols as folbws:
1“26 & 1=7 (RF Expandsr SalsUs)
●nd fwfd 2=m (numbar of partitions) must ba programmed.
This idontifios the ttss of RF Raoakrars and the numbar of
partitions baing usad in tha system.
1. Enter Programming ~,
then prasa #93 to dispfay
ZONE PROG?. Prass 1 to ●ar ZONE PROGRAMMING
Enter 00 for no suppmasbn.
Enter 01 to suppraaa amWbarm & ●ntry/axif baaps.
Entar 02 to suppraaa ohima mode baaps onty.
Enfar 03 to supprass arrnldiirm, ●ntrylsxit snd chims
mods baspa.
zona numbar to ba pmgrammad (01-64, 86-91,
2. %%the
S5, 96,97 or 99). Press ~] to ~
wrtry.
3. Enter tha zons raspoma typa for thatZons (01-10). Tha
aoraon will ●ufomatioaffy dmpfay ths zona typs for tha
numbar ●ntorad. Prass ~] to aooapf ●rttry. ff ● different
zone rasponaa typa is dosimd. antor ● dfloranf numbar
and prass p].
4. Dopanding on whsthor or not RF Expansion haa ba~n
programmed, and ifthiszona iabatwaan l-63, thaaystam
will ask tf thm & an RF (wiroleas) zona. Entar 1 for yes, O
for no. Pmsa ~] to accapt ●ntry.
5. ffthszonanumbar is batwaan 10.64 andthazonahasnot
baon aalaotad as 8 wimlass zona, tha aystom will ask if
tikkar@~~mw.
E~ltiy~,
Otirm. Pws~]
to aooapt anfry.
6. Enter tha partition numbar for this zona. Prass p] to
●rttry.
mpt
Tha display wifl mpaat with fha zona numbar quaatbn for
programming tha ofhar zonos in tha syawm. Enter 00 to
●xif back to normal progmmmirrg mods.
-30-
Ths soraon will display tha naxt oonaola numbar to bs
~-.
6
-. Prasa 00 b axil Manu Moda.
No=
~~ob
addrcaa 00 is always b% sat to ●n alpha
~b
withno sounder auppmssion options.
.
ALPHA PROGRAMMING
Asslgrhg
Zen. & Pm’tltlon Dosorlptors
tt using ● 5137A0 ~neolo, ● user friendly Engfiih language
doscriptionlbcetion of all protection zorms, partitions
keypad panbs, polling bop short ●nd 4280 supervision
faults -n be programmed into the s~rn.
Each descr”~icrn
can be composed of a combination of words (up to ●
maximum of 3) that ●re selected from ● vocabulary of
approximately 220 words stored in memory, and ●ny word
can have ●n ‘s” or -‘s “ ●dded to it. tn addition, up to 20
irrstatlordefined words oan be added to those ●lrsady in
mmory. Thus, wtm an afarm or tmubb mews h a zone, ●n
eppmpriato doacription for the location of that zone will be
displayed at the amsole. An irrstatbr’s message can also be
programmed for ●ach partition which wifl be dispteyed when
the systam is %e~
(ex. lHE PETERSON%).
Entering
Zone
Descriptors
1. SelectZONE DESCRIPmade.
Tho consab keys patform tho followingfurrcfbns:
[3] Scrolls both ●lphabet and actual words in escandhg
●lphabetical orcbr.
[1] Scrolls both alphabet and actual words in
descendhg alphabetical order.
[2] ~swromows-%=~”’s”ba~-.
[6] Toggles between stphatret and actual word Ii uead
to accept ●ntries.
[8] Saves tho zone dadption in the system’s memory.
[#] # plus zone number will display the doscriptbn for
that zone.
2. Key “01 to begin ●ntsiringtho descr@ion for zone 1, (by
“02 for zone 2, ●O3 for zono 3 ate.). The following W61be
displayed: “ ZN 01 A
Nota that the first latter of the afphabet appears attor the
zone number, and that the zone number is automatioafly
included with the deecripbn.
3. Select the first btter of the desired descrbtiin htote that
‘A” is already dispbyed). Use ~-p]
to &an&
through
the alphabet ●nd koy [1] to go backward. For exampb,
assume the desired description for Zons 1 is BACK
DOOR. Press key ~] repeatedly (or hafd down the ksy)
until %“ appears, then press key [6]. to dispfay the first
available word beginning with B. Repeatedly press key [3)
to advance through the ●vailable words until the word
BACK is displayed. Press key [1] to move backward
through tho word list.
To add an ‘a” or - ‘a ‘, prsss the [2] key. The first
depression adds ●n ‘a=, the aeoond depression adds an ■
‘s’, the fhkd depression dwfaye no character (to erase
the character), the fourth depraasbn adds an “c-, ate.
To accept ths WW press the [6] key, m
to99~ ~
to atphabet fist.
4, For selection of the naxt ward (~),
~a
$t.P 3* but
press key 13] until tlw desired fii letter of the next word
appears (in thm ●xampfo, W). Than press key [61b
display the f~ avaibbfe word beginning with ~. Press
key [3] repaatsdly until the desired word (DOOR)
appears. To aooeptthe wed, presstha 16] key, which
sgain toggles beck b atphabet list.
5. When all desiredwordshave been ●nterad, press ~ [8]
to store the deacriptbn in memory.
6. To review the zone descriptions, key [#] plus zone
number (e.g., #01 ). To adii zone deacriptiins. key ~]
plus zone number (e.g.. “01)
7. TO .xit the zone desdptbn mod., fW ~.
NOTE: Alpha descriptor entry can be ●ntored focaffyat the
5137AD console or remotefy using ● 4130PC Downbder.
To program alpha descriptors,ontor Programming mode,
than proas #33 to display ‘ZONE PROG7. Pm
O (NO) ~
display ‘ALPHA PROG’?. Press 1 to ●ntor ALPHA
PROGRAMMING mode. There are 5 sub-menu eebctiorts
that will be displayed one ●t a time. Press 1 to select the
mod. desired. Press O to display the next morh availsbb.
The ●lpha sub menu sobctbns am:
Addl ng Custom Worda
Up to 20 instefbrdefined words can be added to the butt-in
vooabulery. Eaoh of the 20 Wards= can actustly ooneist of
several words, but bear in mind that ● maximum of 10
charactere oanbeueedfor -wanlatring.
1. Select CUSTOM WORD mode. The keys parform the
folbwing functions
[3] Advances through a@habet in ascending order.
[1] Mvanees through a@mMt in dascsrrdii order,
[6] Selects desired Iattec moves the cursor 1 space rigM.
[4] Mows the cursor one epaoe to the left.
[7] Inserts ● space et the cursor bcation, ●raskrg w
oharacfer at that focatiin.
[8] Saves the new word in the aystem~ memory.
~] Returnsto deacripbr ●ntry mode.
4. K~tbnum*d-~~orwd~tigtib
oreated (01-20). For ●xempts, if you are creating the fikst
ward (or word string), ●nter 01: when oraating the saoond
wwd, ●nter 02. and so on. A oursor witl now appear at the
begiining of the second line.
5. Use tho [3] key to ●dvanoe through the ●lphabet
(numbers, symbols ●nd special characters ●re included).
Lfsetha(l]keyto movabsckthrough the@abat.
IMPORTANT:
Custom words must baain with an
alphabetic character. ff numbers or ~mb%-sre usd ti
the fii character. tha word wifl not be saved.
6. When you have reached the desired charauar, press the
[6] key to sefacf k The cursor wifl then move to the right,
in positionfor the next character.
7. Repeat steps 5 and 6 to create the desired word (or
words).Note that the [4] key can be used to move the
cursor tothefaff ifnecesaary, end that key~canba
used to inter ● blank {or to ●raea an existing chareuar).
Eaohwardorword atringoannot axoeedlocharutars.
8. Preee the [6] key to save the ouetam word(s) and return
tothe*ED
??dbplay. Thecu$tomwxwd (or stringof
wards) will be ●utomatbally added to the buitt-in
vooebularyattheenddthegroup
ofwurdsbegiining with
the same btfer.
94 Repeat stops 4 through 8 to crest. up to 19 ●ddiinal
custom words (or word strings).
10. Press the r] key to return to the 9ZN ?? dieptay, and
follow the zone dasafptbn entry procedure to assign the
newwordsto azonedaecriptbn.
Il.
Key OOtooxltthe zonedascr@bn programmingmode.
Creatlrtg Partltlon Descriptors
1. SelectVan DESCRIPT: mode. The system witl ask for the
psrtitiin number desired. ~er the number as a eingtakey.
2. Folbw the same procedure as for CUSTOM WORDS,
●xcapt that partition deaor@om are IkrMad to four (4)
charaotors (ax. WHSE for warohousa).
-31-
2?)
Croatlno A Custom MOB-O.
D18PlaY (Instahr’s
M.ssao.)
to rcplsos READY TO ARM with tho
Normal~, when tho system bin tha disarmed ststo, the
2. For cxamplo,
mossago SERVICE*4=01 77, proosad as folbws:
following display Is prasant on tha Consolo.
“-DMRMED”READY TU ARM
Prass ths 16] koy to movo tho cursor to ths dght, and
oonthw
until tho cursor is posltkmd ovar tha fkst
Psfi or afl of tho above messaga osn be trddiad to oraatc ●
bostionon the saoondfins.
ouatom Inatdlor mossago for ●aoh partition. For ●xamplo,
‘-DISARMEDon tho first iii or READY TO ARM on ttw
Presstho [3] koy to advanos through tfw ●lphabat to the
saoond Iins could be roplaoed hy tha indlatiin
company
first desired character (i thii oaao. “S). ~SS fh~ [11W
rum. or phono numbar for service. Not. that tharo am only
to go backward, when necessary. When tho desired
16 charactar spaoes on ●aoh of tha two Iinas. To oroato ●
charauor is rsachad, press [6]. Ths cursor will then move
ouatom display massaga, prcmad as follows:
to ths naxt position, raady for ●ntry of ths naxt character
(m thm ●xanrpie, %7. When the cursor raachas a position
1. SeIad DEFAULTSCREEN mode.The oonsolewifl ask for
ovar an ●xistii Charactm, pressing the [3] or [1Jkey will
the partitii numbar for this massage. Enter ths partitii
●dvanoa or back up from that character in the alphabst.
nurnbar number. Press (’l to ~
entry.
Prcwead in this mannar until all characters in the message
Thafdbwing wiuappaac
two been onterad.
““DISARMED”””
3. To store this new display message in memory, press the
[8] key.
READYTOARM
A cursor will ba present at ttw ●trame left of tha first Iii
(over the first “star). The [6] key is used to move the
cursor to the right ●nd ths [4] key to movethe cursor to
the bft. Key 171may ba used tO W ifI$efi s-s
or.-
4. Press the ~] key to return to the “ ZN ?? display. To
confirm that the new message has been stored in
memory, press 00 and then press 00 again. The new
massage shoufd be dispfayad.
existing chu-a6tem;
5. Key 00 to exit the descriptorlprogrammingmode.
Vo[
BULARY
OF \
ALCOVE
ALLEY
AMBUSH
AREA
f#ThENT
IRDS STOREO
FOIL
AIR
COATROOM
collection
coMslJsTioN
FOYER
mm-
coMPlmR
CONTACT
w
:)
G&l&FgY
DESK
OHECTOR
DINfNG
psNsuylNATof
ES
G&ST
BABY
BAOK
BASEMENT
BATHROOM
E%OOM
BEU
BLOWER
BOILER
BOITOM
BOX
;=!NG
sum=
CABINET
OASE
CEILING
CELLAR
:=
CLIP
CLOSED
cOtN
“Note: lhis
-32-
‘bowti
HEAT
HIGH
Wx&P
DOWNSTAIRS
DRAWER
DRIVEWAY
INSIDE
lf4ERJoR
@JIRUsloN
JEWELRY
ELEcmo
EMERGENCY
LA&DRY
EWWCWW
E%fOR
F~
FAtLURE
FAMILY
FATHERS
FENCE
FILE
%
MAtDs
MAtN
MASTER
MAT
N
W
RtGHT
MEDICAL
ATTIC
AUDfO
AUXILMRY
U MEMORY*
MAGNETIC
LEVEL
LIBRARY
X&T
LIVING
LO~lffi
MEINCINE
MICROWAVE
MONEY
MONITOR
MOTHERS
MoTtON
mm
SAFE
SCREEN
SENSOR
SERVICE
NURSERY
SIDE
:KJ.m.
OFF=
OIL
SMOKE
SONIC
~RINC3
OLJTSfDE
OVERFLW
ovERHEAD
%%%
~f+wf?.R
PAtNIING
PANtc
STATtON
STEREO
PASSIVE
PATK)
PERIMEIER
PHONE
Ptiti
POINT
POLtCE
POOL
POWER
L@O
RADto
LOWER
REcREAmN
fIAAOHINE
REFRtG
facfoty-pfovidd
vocabulary
SHOOK
SHOP
of twrds is subjwf to change.
_
TOOL
HSMRTER
ULTRA
UP
UPPER
UPSTAIRS
UTtLITY
VALVE
VAULT
VIJ~W&N
WALL
WAREHOUSE
WASH
WEST
%!:
M=vlss
YARD
ZONE
o
STRESS
glJwJE
E
Supervised
~~P~;;$ON
4TH
m
swrroH
!%
TAMPER
TAPE
9TH
TELOOFHONE
TELLER
TEMPERAlwE
Vlll. DOWNLOADING
PRIMER
—
—..———...- ..-
—---- -.-—--
WHAT CAN BE DONE ONCE PANEL W ‘ON-LINE7
●
Arm the System in the Away Modw Disarm the System
Downloading dbws tho operator to mmototy ●ccess,
✎
Bypass ● zone
progmm, ●nd control the security system over normal
●
● New Progmm Download
Foroa the System to ~
tebphone lines. Anything that can be dona directly from tho
✎
Shut Down Communication (dialer) Functions (nonkeypad can be dona remotely. using DOWNLOADING. To
payment d monitoringfees in an owned system)
hwnioad, the tdbwing is MqUiMd:
1. An IBM PC, or compatible oomputor with MS UM 3.1 or ● Shut Down afl Sacurhy System Functions (non-payment for
● teased system)
highar, to run tho DOWNLOADING program. MS DOS
✎
Inhti Local Keypad Programming (prevents takeover of
stands for: Mii
Disk Operating Syawm.
your •~nts)
3. A HAYES 1200 SMARTMODEM (mrtomak feval 1.2 or ✎
hqhen internak bvel 1.1 or hqhar). tt thsse bvais cannot ✎ Laave ● meaaaga for customer (5137 ONLY)
Cemmand the System to Upbad ● COPYof its Resident
be found locally, an ●xtemd modem an be purchased
from ADEMCO, or contact HAYES for ● free updam. Other ✎ Program to the ofb
Read: Arming Status, AC Power Status, L@ of Faufted
●ven it claimed to bs 100%
brands are not compatible,
zones, List of Bypassed ~fW,
224 Ewnf Log, List of
conrpatbb.
Zones Currently in Alarm, List of zones Currentty in
4. 4130PC V-LINK@’ DOWNLOADING
softwar., from
Troubb, List of RF sensors with low battery =lldii’bft$
●
ADEMCO. This software is ●vailable in both 3-1/2Set the Reai-Tima cbdL
(4130P3-3) and S-1/4- d~keftas, ●nd incfudes ● complete
HOW SECURE IS DOWNLOADING?
User’s Manual.
Accessing the Control from a remote bcation is protected
HOW DOES DOWNLOADING
WORK?
against campromiaa by the use of 4 bveis of protection:
At the protected premises, the Control panel must be
1. Securiiy Code Handshake: The subacr”tir’a account
connaded to the ●xisting telephone fine (refer to the PHONE
number as wati as an 8d@ fD number (known only to the
LINE CONNECTIONS section). No progmmm”~ of the panel
offii)
must be matched between the Control ●nd
is rquirad before downbadii to ●n iniiial inataiiation.
computer.
To download, do the foibwing:
2. Hang.lfp and Catl-Bacic The Control panel wiU%ang-up”
1. Enter the installer ~e
+ [#l+ ~. ~
panel temporarily
●nd call the computer back at the pm-programmed
●nables ● ring aunt of 5 ●nd sets the Downbad catnumbr only if the security codes match.
option to “1- (caitback rmt required).
3. Data Encryption Atl data that is exchanged between the
2. Call the panel using the downbader aoftwam set to
computer and Cantmlbmcrypwd toreducethe posaibiMy
%iFtSTCOMMUNtCA~
nmda.
ofanyune~ths
iineandcorrupting dti
4. Operator Acoess Laveta: Up to 15 operators can have
3. The downloader will establish ● session with no ~
access to the DOWNLOADER each having thdr own bgThe panel informationcan then be dwnti.
on code. However, each operator can be assigned one of
In order to remotely ●ccess, mntrol or program the alarm
three ievefa of access in both FILE ●nd COMMAND
panel, a ~ir& must be eatabiiahadbetweenthe oomputM and
functions, as fotbwa:
tha cimtrol panel, as Mows:
WHAT IS DOWNLOADING?
1. The computer calfa up the Control panel. (’l%. phone
2.
3,
4.
5.
6.
7.
FILE ACCESS:
Read Onty: able onty to bok at the database; cannot
number for each customer is ●terad into thecustomer’s
change ●ny information, and cannot sea the customer’s
account fk on theoomputor).
access ~des.
The Control panel “answers” at the pra.progmmmad ring
Part ReadlWriie: ●ble to took ●t ●nd change ●ll
count and executes a handshake with the ~r.
informatbn. except the aratomer’a access ~dea.
the Control
The computer sends ● rqueat for oaf-to
Full ReadMfte: ebb to look at and change any and all
unteaa dkback is not required.
informationin the database.
CONTROtJCOMM
ACCESS:
The panel acknowledges the request ●nd hangs up.
Read O*
ebb only to Upbad and arm the system. Not
During the next few seconds. the control will process the
ebb to DtSARM, BYPASS, or change any information.
request making suro certain ●ncrypted hrformatbn,
Part ReadlWrit.
able to ARM, BYPASS, UPLOAD,
received from the canpuwr, matches ils own memory.
DOWNLOAD but cannot shutdownthe system.
Upon a successful match, the Control panel will seize the
Full Read/Write: able to perform ●ll =ntrol and status
phone tine and cdl the ~mputer baclG unless caft-back b
commands, os well as shutdown atl or part of the system.
not required.
NOTES:
The computer ●nswers, usualfy ~ the second ring, and
1. Each time the Control panei is accessed (whether
●xecutes a handstdte with the panef.
successful or unsuocesaful). ● PROGRAM TAMPER
The panel then sends other default information to the
reportMO) is sentto centraliiafiom if programmed. computer. ft this information matohos the computer’s
2. ~30wnbdk’ig,
the console will display ‘MODEM
information, ● succosaful link is ●atabtiihed. This is
known as baii “ON-LiNE”.
● download or ● save is don., an automatic
3. Whatier
ADVISORIES:
1. Aiarm ●nd trouble responses and reports are dieabbd
during on-lime time. Should an ●vent occur during thii
tima, the msponaa will take place and the report will go
through as soon as the remote access sequence is
aJmpiatad. Afarm and trouble conditions 8ra not ignored,
they are simply delayed.
●re inactivo
during downloading
2. Tho keypads
communication, and resume normaf functionsafter hang
tkneatampia done, indiithadata
andtimeotthefast
downbad (oraave) and the operator ID number.
4. TIM avemge time for ● complete downbed, hrcf~tng
initialoafl-up, hang-up and ~
is under 4 minutes.
5. Amrnpiete hardoopyd oechindiiidimla caountcanbe
obtdnadbyanna&g
a~rtothamrnpder.
Rafarm
youroornputer owner’a manuator~your
daaiarfor
prhter moommendationa.
UP.Atlkeypad●ntriesare ignoredduringon-tinetime.
-33-
IX.
TESTING THE SYSTEM
USING TEST MODE
ARMED SYSTEM TEST
After tha Ijtstaflatlon b oomplatad, the Socurfty System IMPORTANT1 A masaago will bs sent to tho oantral otmbn
8hOUfdbs thoroughly taatad C8 fobws:
atatbn that ● tut
during tha folbwlng tosta. Notify thaoantral
1. Wtth tho Syatom In tho dkmad stat., chaok that ●ll till ba In ~raaa,
~mimflDSMED-P-r]~stitaw
b NOTE A d-y
FAILURE’ lndioatos● fdhlm b
of -MM.
displayad, praaa tha ~] kay to dbplay tha daacdptora of =mmunbato (no Kiasotf by tha raodvor at tha cmtml atatbn
thhttad
Zona(o). Raatora fauttad Zona(s) ff ~,
afbr tha maximum numbar of tranamiasion altwnpta la triad).
‘“Disarmed””
READYTQ ARM& dbpiayad.
ff thb oaura, varffy that tha phons Iina b ~nnactad, tha
2. Erttor tha aaoudtyooda and praaa tha TEST kay. ~C mrract raport format b programmed, UC.
and 1, Armthasyatam arxltaultona orrnorazorraa, siiancaabrrn
axtarnalaoundar (if uaod) should sound for 3 ~
then turn off (tha syatom b opamting on tho bad(-up
00Uftd.r(.) ●aoh tima by ●ntoring tho ooda and prassing
battery onfy at this tirno).
OFF. Chack that Entry/Exit delay zonos provido tho
aasignad daby timas.
NOTE 1. If tho aoundor doss not sound, this may ba ●n
indii
that tha ~
battery is dii
or missii.
2. Chock tha kaypad-initiatad abrms, ff programmed in field
“OS,by praaaingths Panic kaya ~ ●nd #, 1 ●nd ●, ●rrdbr3
and *). tf the syatam haa boon programmed for audible
●mordancy, tho oonaolo will ●mit a bud, steady alarm
sound. Tha word AIARM ●nd a descriptor %9= will ba
d~dtir”
ti#.
(til~O=o
vti,
a-Wwtilk
dbplayad; if 3 and # ●ro proaaad, a W= wiflba diaplayad).
Sikwa the alarm by ●ntering the saourity oodo ●nd
proasing OFF. tf tha system has boon programmed for
silant panb, thars will ba no audii
alarms or d~ys.
A
raporl will ba aant to tha oantral station, howavor.
NOTE 2. Aa ● romhdar that ths ayatom is in tha Test mode,
tha Consola will Wnd 8 Singla baap at 1~
intarvals if
no protection zonas ara vblatad.
NOTE 3. In tha last mode, no alarm raporta will ba aant to tha
oarrtral atatbn. Abo, tha ●xtornat aoundor (i mad) will not ba
activatad.
Doors ●nd Wtndowa
OpanandcJoaaoach pmtact@doorandwindow inturn. Each
should produca thraa boaps from tha Conaob. Tho
=~ratimnzotit
ii~onfhatinaola
3. Notify the carttral station that ●ll tasts ●ro finbhad ●nd
.
. varify rasutts with tham.
MotIon
Dotootors
Wafk in front af any intmior motbn damotom. Man for thrw
TURNING TNE SYSTEM OVEf! TO TNE USER
baapa when tho datactor aansa$ movamont. Whila it ia
of ths ●ystam to tha uaar by
sctivatad, its daacriptor wilf remain d-ad
on tha Consob. 1. Fulty ●plairr tha ~ratbn
going ovor each of Its functions as WOII so the Usar’a
Nota that wiralosa PIRs wifl havo ● 3 minuta Iodrnut hatwaan
Manual S1.pphad.
transmisabns to oonaarvo batbty Iilo (ronwva -r
for walk
taat b overrida tha 3-minuta Ioctwut).
2. In Particular, ●xpldr the oparation of ●ach zone
(entry/exit, parimotor, {ntarior, fire, ●tc.). Sa sure tha
Smoko Dotootors
user undoratands how to oparate ●ny ●mergoncy
Fotbw tha taat procAuro providadby tha manuf~uror of
fa8turo(s) programmed into tha ayatam.
●ach smoke dotaotor to ●nsura that ●ll dotactors w.
lMPORTANTf: In tha spacas providadin tho Uao~s
oparatbrral and ara functioning proparly.
Manuat,mwrd tha Entryand ExitDatayt.hnaa,andthosa
NOTE: A 2-wiro amoka datactor dwffi not obar until tha
btctbns that hava baan programrnodintotha ●vailabb
Taat rnoda is ●xitad.
Tumfng Off TEST mod.
Enfarthaaocurky mdaandpraaatha
OFFkay.
3.
pairaofPANtckayac41 #,16=,36 #).
Maka ●ura tho user undorstanda tho importanoa of
tasting tho
●ystom at Iaast waokty, foibwing tho
Pm=dWaprOvibdi nfhautiManuat.
~
UL
IN
IREMENT
WtroninstaNingapankhadsystam, ULroquirasthatthafofbwingtraabaarwd
mkmtbaownad andmanagad by fhaamoparaon(a}
1, ASpartitii
2.
3.
4.
AllpartWns rnuatbapartof onabueding atonastraataddraaa
-d--~(a)mmb~-m~-~-~d~-.
Tha Contmfcabinat itaalfmust batamparmtactad
andcmmactdb
S.
Downbadii is notparrniaabta.
amaasbthaarol oabinafwifl
oauaaanitarrn.
●24hourtypa zonoauchthat anyurrauthorizad
installttr should assume the responsibUityof dewfoping andoffering
a regular maintenance program to the
~
atiti-mmdti~memamw
Useraswella
sacqbung ti~r-ti~rmbn
must be incfudd
component parts. R acerrtmncfatbrts
em’s pmpe r oPe ration at alf times.
toirlsuremesYst
=34-
for a apedfic progfarn of f~eti
testing (at feast weekfy)
X. TROUBLESHOOTING
RPMs
CONSOLES
Con80k
●
●
ta lnooambk:
●rmtlo dkdav
Zonos Indkating
Powor down ~rnptak~
(AC + battc~), disconnect the
battery, ●nd powar up again (AC only).
Chock that ●uxiliary voltago is betwoon 12.5VDC14.oVDC. if m d~nnsct
afl auxitii devii,
and take
●nether readhg. If within tha abovs fangs, there is too
much currant being drawn by the ●uxiliary dovicas. (see
tho Polling Loop & Auxiliiry Device Workshaats for the
current draw of ●ach dev’be). tf still not within the above
mngeo chsck incoming power from the No. 1361
transformer. Vohage should bs 16.5VAC. ff bebw 15VAC,
carefully cheek the AC supplyfor a minimum of 110 VAC.
With all auxifiary dev”kes ●nd battery still disoonnacfed,
check the voltage on the red & black battery leads. It
should be 13.65VDC (approx.).tfnot,raplsos the Control.
ff it is@ 13.65VDC, the battery may not be ●t full charge
(allow the bafkry to charge 12-24 hours bsfore
moonnecting the auxiliry devioas) or the batterymay bs
bad, andnotabbto hokfacharge.
Consoto dlspkyo “Not Ready” but no zone k
●
dkplayod what the ~] ready koy b dopro8sed
Chaokto rnakosure thsra is ● zone tVPSrasponsa ●ntemd
●
in program tiitd “05 for %7 fpotling b
rasponso
is ●ntorad and
titt).
● tikp short are,
ff no zone
the dispfay
will only read wOT READY, without an ●xpbndi.
●
●
Ched( to dotermino if ● right bop has bean ●nabbd for an
RPM in a zone ●xpanded syskm and rm zone msponaa is
assigned to that sensor foop.
A zona programmed as ● 24 hour Want (type 06) is fautkd.
HARD-WIRED
ZONES,
1-9
Zono 1 In troubk (“CHECK”)
ff programmed for fire or burglary using opsn-circuit
sensors, ● 2,000 ohm EOLR must bs used ●oss ths
●
zone, at the fast devioe, as daacribad m ths SYSTEM
CONFfGURATION: ZONES sactbn.
2-S not doteotlng faufts when tholr EOLR8
shorted (READY dkpfay days on)
ff using EOLRS, check that progmm fbfd “41-o ff not
usingEOLRS,“41.1.
Zone 0 k Indkstlng ● fautt (“READY” wtll not
Zonos
●m
●
●ppear)
●
‘CHECK” conditions
. check that the DIP switches are set Oormctly.
●
K only left loops am bsii ussd, mako sure program fiitds
“06, ●
07, “08, 1“10, 1*11, 1“12, and 1“13 am pmgrsmmad
as v.
. ff both left and right toops are bshg used, make sure
program fields “06, “07, “08, 1“$0, 1“11, 1*12, and 1“13
am programmed with W% for the bft hops and ‘1”s for the
right hops. NOTE: On a 4190WH you cannot use ● right
Ioopunlessthe bftbopisusedalso.
.
Check pelting toop voltage at the cmtroi as wall as at each
RPM. Thsm Shodd be fluotuafing8-11 VDC wr the bq.
“ Check if programmed for tamper detection in pmgmm fwld
“24. II “24= 0, the RPM will oome up in troubb when its
mvar is removed (4190WH onty).
“ tt a 4208 is bsii used kr zones 10-17, program fiikt ●86
must bessttor”l”, andtha DIPwvitchesahouid beset 8s
follows: 1,2,3,4,-ON,
5-OFF.
If ●ny other 4208
86 must - V end the
oontiiumtbn is bshqf used, fiikt ●
DIP switches sot ●ccording to tho instructions
-mpsnying
tha 4208.
Zonoa Indkstlng
●
Thii zono is for dosed drouff, unsupswfssd uss onfy. Do
notuseoponcirouit do~sorsn
EOLRonthiizons.
Zen. 9 fake ●krms psrlodlodly
Zone has bsen programmed for ● rsspo= timo of 5-10
milliseconds ~1 4), ●nd should be used with ‘Fast
●
rosporrso”devioas, such as vibratbn sorrsorsor glass
break sansors. onty. H devicsswith 8 msponsstime of
gmatorthan 10 miffissconds
am used,tho zone may fats.
atarm duo to oontacf %ounoa”, tf ussd &r areas where
vibrations may oocur.
Zonos 1-9 not dotootlng faufts (READY Ilght
stays on)
ChaCkPr09mmfia!dS1018and l“19tomaks sursthswimd
zone(s)in questionhmmnotbeanwablsd as RF zones.
fauft oondltlons (“READY” not
dlsplayod)
. tt‘usirig● 4W0Wt+,maka ●um that the jumpsrs am sst up
in ~rdanoe
with ths EOLR behg usad on the tstt bop
(the right toop rrevor uses ●n EOLR). Sss the 4190WH
WfRING DtAGRAM in ths SPECIFICATIONS section for
~Wdt-XVdEOR.
. H using ● 4208, make sum the zonos are setup wtth ths
arract EOLRS. Se. tho SYSTEM CONFIGURATION:
ZONES section for 42o8 usage.
. ff using ● 4186 rfght toop, mako sure onty ctossd~rcuif
dsvicss am used, and chsck the program tiolds %6
through “08, and 1*1O through 1“13 to mako sum ths
zonsainqusstbn aresnabbdas right toopsft’).
“87” ●ppeam In ooneofs dkptsy wfth mpld baepfng
●
Thii indaos
that ● “short= has bsen dstected on ths
P-W *.
“ OMcatOcJkll&*pobrfty
fs~atthsmlltrolas
Disoonnssf the potlirrgtoop and chdt for continuky from
tiehh(+)bdhbtigmd.hsmub
no continuity to ground. tf them is a ground, ths aouros
must bs found and ●laminated.
“READY” dkpfay not gelng out when zonos faulted
●
●
Ohsokprogmm fiil”19through
thszonss krquestbn aratienabbd
l%5tomakssursthat
as ffzonsa.
Makosure sachzonsinqumtion has bsonprogmmmedfor
“ ● msponss intibtds %2-*O5 and l“ol=l”m.
Coneda dbptays “NOT READY” but no zon. k
dkpky.d wh.n r] READY k.y k d.prosssd
programfidd$ 906 through●08. ●nd 1.IO through
1“13 to make sure that MM boos are ●nabled for the
●
awmctzo
nea.tfno
righttrxipsare-bsii
●
uasd, thssefiekts
should -v.
●
-~rmtiM*W@Wsurotkmkamw
msponsa ●ntered for WT. tf ● poltii foop short ~rs
and no rasponso is ●ntersd for 37, the dwlay wouid
indii
‘NOT READV with rm ●xpbdon.
. A point pmgmmmad for 24 hour silent (typs 06) is faufted.
- 3s -
275
WIRELESS
’88” or ’90” ●ppeara ttt oonsofa dbplay ●nd rapid
bsanlrta ooours
●
●
✎
●
The raoeiver ia not raoaiving ●y signets from arty of the
trartemittdrs in tho aystom. An W“ is for the2nd rscaivcr;
●*
is for theIstraoeiver. These d~bys ●m ●nablad
by assigning ● zone rasponsstype in progmmfiitd V09.
cheek that the ●rtonna b inatatiad proparty ●nd is not
shortod to ●ny matal objoot, mfsr to WIRELESS
ExPANsfoN
aeuionfordataiia.
thatth. tran$mittora ●m powered
●
Chti
that polling bop polarity is oorract ●t the control
panai, aswsflasat oach4280.
✎
Check oorttinuity from (+) sido of ths bop to ground
(disconnect the potting loop from the control firstl) - ●n
open shoufd be mad (no continuity). tf ● short to ground
●xists, fti and ●fiminato the short.
✎
VOttageacrosa the polling bOp at the control panel
●t ●ach 4280. if used - them should be
fluctuatbn betwsan 8-11 VDC.
~
●s WOII as
Dotormina if ●nything b blocking tmnsmission to the
reoeivar (ox: ntetaf cabhtata or shelves, etc.)
diapiay not going out ufhan RF zortos
M 4280 b uaad. remove ha covor. Put the system h the
;READY”
.. .
test mode, fhon sss if tha transmitters ckk-in.
ff rwt,
move the reoehrorto another focationand teat *sin.
. Check that the house iDs match between the transmitters
besmlno 000UrS
. Tb ~ivar
is rrm raspondii to tho Canfrol panel An %~
mfsra to the second receiver and ● %1” refers to the first
raoeivor.
●
H@80buti,Mtiti~~S~rkonatiW
magnet is in dose proximity to the read switch.
✎
Check that the arttrol b wired properly b the raoehrer.
tf 4260 is used, determine that theourmnt dmw on tho
polfing loop is not mom than 64mA. ff the draw does
exceed 64mA instafl ● 4197 loop axtondcr module, or
-r
the 4280 from auxitiary power, as doscribad.
✎
●
voft batteries.
CharStthatthe houseIfYantabh between tmrtsmitters ●nd
’88” or “81” ●ppswa in oortaolo display ●nd rapid
✎
snd rapid
booDina occuis
●
T& ifiioatss that tho polling bop has stfhor ● dirsct short,
ors short to ground on tho (+) side. Miiht ●lso indicate that
the 4280 RF Racaivor is causing the short (diseannect
4260 to Vsdfy).
up with fresh 9
the racaiw.
●
“07” ●ppsars In tho conaoio dlcpby
Chec4cthat the wire run length is in agraemont with the
racortrmendad wire gauge.
kt tho system, ●m
Zonos, not progmntned
Indloatlrtg
“CHECK” oortdltlons
and the receiver.
●
Check that the rsceiver is onabbd in program fields f “26
for the first receiver and 1“27 for the second receiver.
●
Check that the zones in qusstion ●re enabted for RF in
program fia~s 1*18 through 1“25.
. Check that a zone response is progmmmad for the zones
in question, in fields ’02 through“05, and 1“01 through
1“05.
. Chaokthat the racahrah antennais properlyinstalled.
. Remove ●ny ssnsors from tho transmitters and shon
across the transmitter terminals. Then fault the transmitter
to sea tf the “READ~ iight goes OUt.tt il does not go OUt,
check the programming for that particular tmnsmittac if it
dOSSgo out, check ths sensors on *M ZOIIS.
.
Move the receiver to another toostionfor batter reoaotion.
Conao& diaptays “NOT READY” but no zone “is
Check programfwlds “02 throughW6, ●nd 1●O1through disptayed when ~] READY koy is deproessd
l*05tomaka 8uraattunuaetfzonaaara0W.
Checkprogramfiiid “OSto makesure37 has a zone tVDS
onterad U ● foop short oocurs and no raspoiiia
. Cti
programfmtds1“18through1%!6to makesurethat
is ●ntered for %7, the console woutd display only oNOT
sltnon-RFzonss areos.
READW,with no ●xptadom
Zortos Indlcstlng ‘NOT READY” oortdltlon, but
A Sient Panb artdiiion may be present. Key the security
trsnsmlttor oontaot toop is intaot
da+oFFwsae
tithamndiicbar’s.
Put the system in the SNiFFER MODE forat taut 2 ftoura,
Whlta in the “TEST” mode, some or stt of ths
to as. if another system in ths arsa is using the aamo
trsrtarnittors sre not responding, or sro
house ID. U so, changs thm system’s houaa tD number.
Make sure zonos in question ●re seiectad as RF &t fmtda responding irrogutarly
TheTest’as the-racahratssensitivityby 50%. This
1“18-1”25.
meansthat as brrg as ● transmitter responds, its location
on. or mors transmlttors ●rs htdloat)ng ‘CHECK”
is satisfactory.
oondftlons ●fter ● whlls; oonaolo bseping rspldty: .
Move the affected transmitters to another location and ra. Chsck that the transmitter havo tho oorrsct houss ID
test.
There may be something blocking its transmission
programmed.
path.
check that tho trarrsmittors have the correct transmittm ID
.
●
●
msponia
●
●
●
●
●
ssaignad.
. Chti
that the tranamittsra have fresh batteries.
●ffeoted, move the recaiver to
location. There may be something Mocking its
If afi transmitters ue
●nether
reception.
. tf no raoaiver bcation oan be found that can reliabty
receive at/ transmitters, add ● second receiver in ●
different bcation in the premises to ●xtend the RF
coverageof the ayatem.
-36-
COMMUNICATIONS
FAILURE” la dlmlawd
“COMM FAILURE” (5137AD)
‘COMM
●
indicates thst tho
communicamr has attomptad 8 timaa to send ● report to
the central station but did not get kissoft.
●
Chock with the central station to mako sum the
programmed format is ●ccaptabb to the central statbn’a
racaivor.
●
Check program field “49 to sea it singlo mossago with
checksum has been onabted. The central station receiver
might not be able m hendte chedtaum.
✎
✎
●
●
Chock program field 1●34 to see if split repofiing is
enabled. tf only ● prim~ centml station ptmna number is
being used, field 1“34 must. 01
Check program fmld “31, PASX ACCESS CODE. Entar up
to 4digha only if an outside lie must be accessed before
the number is dialed or if “call waiting” is to ba suppressed.
The latter feature must be obtainod from the bcal
telephone curnpany. To make sum tits field is empty, koy
%1” to ●raae this bC8tiOn.
●
Chaok program fiotd “30 for oithor TouchTon. or rotary
diahng. tn most CSSSS,E rotary is selected dialing will be
successful, but if TouchTone is solocted, than the tina
must be ● TouchTone tina. tt is POSSMOthat ● tins that hd
permitted TouchTone swvics previously was now being
biodtad from that use by the telephone _ny
because
the user wee not paying for that service. At inetsllatkm
time, it is important to check with the user to determine if
they era paying for TouchTone service.
H SESCONRADIONICS
format is being used, check
program fmld “30. tt hexadecimal codos ●re being sent,
enter ● W. U only 0-9 is being sent, oithor ●”1● or a T is
acceptable.dC~~dw~h the central station to verify
.
If 3+1/4+1 LOW SPEEDisbahg used,cha& theID portion
of the won coda folds. There should be W- in afl of these
fields. Some central station receivers
cannot handle
seared digit re~rting.
●
Chad the telephone numbers progmmmad in fields =
“34.
●
Listen to the outgoing all attemps using ● handaeL
●
on the Tebo connector.
Check thewiring
-37-
&
XL
4140XMPT
PtrYslcal:
SPECIFICATIONS
CONTROL
12-lm
x 14-W-H x 3-D
Eloctrlcal:
VOLTAGEINPUT:
From Ademco No. 1361 Pkrg4n Transformer (use 1361CN in Oanada) rated 16.5VAC, 40 VA.
ALARMSOUNDER0Lf7P~
10VDG13.8VDC, 2.8 amps max. (non-UL installations),75omA lass aux. current draw (UL
installations).
AUXIUARYPOWEROLfTPtJV 9.6 VDC-13.8VDC, 750mA max. For UL installations,the accessories connected to the output
must be UL listed, and rated to operate in the above voitaga range.
BACK-UPBAITERY
12VDC, 4AH or 7AH gal d.
YUASA NP4-12 (12V, 4AH) or NP7-12 (12V, 7AH) remmmendad.
Use 4AH battery for UL installatkms.
STANDBY:
4 hours min. with 750 mA aux. load using 6 AH battery.
CIRCU~ PROTECTORS:
Thermal circuit breakers are used on batterY incwtto protect aoainst reverse battew
conrmctionsand on alarm sounder output 6 ptbtact against wfing fauks (Shorts). “
A solid state atcuit breaker is used on auxiiiiry power output to protect against wiring fautts
(shorts).
DIGITAL
COMMUNICATOR
FORMATS SUPPORTED:
ADEMCO HtGH SPEED
ADEMCO 442 EXPRESS
ADEMCO LOW SPEED
ADEMCO 00NTACT fD
SESCOA
RADIONiCS LOW SPEED
LINE SEIZE: Doubie Poie
RINGER EQUIVALENCE: 0.78
FCC REGISTRATION NO.: AC396U-66192-AL-E
4190~
OPkRATIC)N
& ~[N~
5137AD REMOTE CONSOLES
8.4 inches
Width:
Phyaicai:
Height:
4.75 inches
1.1 inches
Dsipth:
Eioctrical:
Interfaca
Wiring:
RED: 12VDC input (+) auxiliarypower
BLUE: Not Used
GREEN: Data in
YELLOW Data Out
BLACK:Ground and (-) connection from suppiamental
power suppiy.
DIAGRAM
The 4190WH is a 2-zona (known as bft and right ioops)
RPM. The left ioop can be used for cloeed-circuit
devices, with or without EOLR supervision, and for
open-circuit devices. with EOLR suoervisbn. The ieft
loop can also be” used with fast-response
(1 O
millisecond) devices. if necessary. Foibw the chart for
cutting the correct jumpers and choosing the correct
JUMPERS
resistor when using the left loop.
The right loop is for ciosed-circuit, unsupervised use
only, and has a response time of 400 miiiisaconds. The
jumpers do not affect the right bop m ●ny way. Do not
use a rosiator on this hop. Note that the right bop can
only be used it the ieft Loop is also used, and that the
right loop numerically foliows the iaft loop’s zone
number, wh~ is set with the unit’s DiP switches (ax. it
krff ioop is zone 12, right bop is zone 13).
IMPORTANT:
The tamper/supenrision reeponsa of
the 4190WH is determined by the zone response type
assigned to the loft loop (even if the right bop is
aaeigned ● difbront response type). Whiie the system
is disarmed, tampartsuperviaory fauits wili ●lwa ys
reportas troublemessages.Whilethe systemis armed.
tampar/supervisory faults will repofi as troubbs if the
iett bop is assigned a non-burgiary response type (i.e.
fire, panic. aux), and will raport.as alarms if assigned a
burgiary response type.
-38-
Voitage Input 12VDC
Current Drain: 90 mA (5137AD with
backiiihting)
RXECUT-
USAGE
(LEFT
ZONE
ONLY)
ut for low currsnl mods (reed tvoa Switches):use the
W,WO ohm resistor,pmvidad.Must_&cutif BLUEjuntpr is
cut. 4t90WH draws1 mAhornthepollingloopinthismade.
Cut tor use wrthno EOLR (doserkurcwtonly). Doingttus
●utomstioallyputsan internalS0,000ohmresistorh series
withbe zone,so thewhitejumpermust also be cut.
Hgh ctment mode:Uss the 4,7W ohm resistor,prowdsd,
Wialmachnkd swkchesin eitherm opemcircunor cbssdckuit oontigwation.41SOWH&aws 2 mA from Uw polling
loopinthismode.
/’EiiiwF-O=Oilnl
‘---
3maN--==rw~
..-.---1
.. .. . .. . . .. .---
. ... ... ........... ... . .
w
-)
277
OIP SW1’OH TABUES FOR AOD~LE
-40-
CONSOLES AND POLLING LOOP OEVICSS
DIP SWITCH TABLES FOR POLLING LOOP DEVICES
,
-41-
DIP SW7CH TABLES FOR WIRELESSDEVICES
5701 Panic xmtr.
14cnme
ID
m
swttchselting
forAll
Devices Excmt5716
mm
5727 Keypad
000
mom
000
m
D
XMTnm
G 41/
S775 PIR
D@toctmKmflsnlttter
ICI!EJ
I
l\
b
C!i’!l
UP.
hnnlfm
en9XWROG3
*
6706 smoke
Detutorflmnwnmef
km
-W*
UP
dn
!5715
---Univenwl xmtr.
,
.
d
c1
o
~fmmi?a
Ugl
Bw Transmitter
s711/6711wM
DwidWndow Trandttw
H
U
1t40usElofl~
r
1
am
m
SloE
m
Cl
-42-
4140XMPT
PROGRAMMING
FORM
Rofor to th6 fnstafhfion Instmctm
- ‘s INDEX Of PROGRAMMING FIELDS for numenosl hstof program fields.
Standard dofauft vafuos ●rc shown m braokats [ ], othorwise dofauh = O.
Fiufdsshown in2s&oMbop+ugrammsd
using thu693MOnumodu.
Paronthosos ( la round ● fmkf number indicate diffmwm8s from 4140xmp programminrafolds.
SECURITY
OPTIO
+]
ASSIGN
RESPONSE
❑
(“1 5) KEYSWITCH ASSGNMENT
Enmr4di91E,0-s
f41401
Errwmnt-~-.ld;[bdsabla
7YPE FOR ZONES
(Enter
00-10;
so.
Re8~onw
1
7YDOS box balow)
1“”09
911 /
j 14fmvR
UsOollorzwwvrwmqulm
ding UWrr4maCw9
huiu
(SS-91)
w Soubin(IypoS).Enmr
Oowno ~nm
DESIGNA lE
RIGHT
“06DDDDOU0
10
11
~
LOOP FOR MULTIPLEX
●XPANSION
1“10
12
13
AC LOSS OPTIONS
“17 AC PCXVEFt
LOSS=Dffi
●1S @POWER LOSSALARM
*4
1S
c1
❑
16
1= .s;
C!CM
~a
t-~]
“1s
lWWI
a
O&no
24
26
AcFWDWfZE
❑
s
0000
37
26
ldMdamx@
0
POWERUPIN PREVDUS STATE
[l+ate
-I”*U
W
40
1044 mm.:P-1
❑
1•33
R)UCWONE WROTARY SACKUPENASLE
m
t~;
●33
PRIMARYPHONENUMBER
❑ nminDnnnoan
%4
SEOONDARY
PHONENUMSER
Dclunclnnclclnc
“42
DIAL TONEPAUSE
n
P-saOaJn@l-ll~,a30a0mn118. MbvklL
●43
DIALToNE~
“48
“47
“48
“49
●SO
E””’”-
lo’”--“s1
c1
DUALFEPORTM
❑
[14mltkwwodial
mnoko+tauM,
sundd
“45
~1
PRIMARYFORMAT
•1
w6m0dl=0maaQ2=Mmn!0
w-~
LOWSPEED FORMAT@nary)
a
~Low6Pob111.1~
1“34
SECONDARYFOFMAT
c1
P-LatspOOdk
lanmc?ct~
m-~
LOWSPEEDFORMAT(Sac)
c1
~Lon$vwJk*~
OHECKSUM
VERIFICATION
0
~s lomol
-
●52
-
●5,
❑
=-—K-SELECT-
•-~WWmmR,
●3S
●36
I
l——
,
nm.
●37
r
“u
PARTITIONED
(2”00)
SYSTEM
NUMSEROFPNWITKWS
NuMsERoFcQDEs
PROGRAMMING
n
PEF?PARITnoN
FIELDS
(2”19)
‘rlw 14 [1]
7DAP~
D
~kt~
EIIR14
(2”07)
4q--J
c1
s~
c1
Sln
c1
K1
a
a
a
a
a
=0
slf-J
d-l
-
-44-
USE PAR~DESORllTORS
AS~ZON/ES
(2’07)
lo
1s1s1s1s1slq
I
\“84 “CODE–“55
——
ID “56~~n=
------
i71
‘g7.- ID
~J
“s8
17m
1—
REPORT CODE & ID 01 T’
%4 CODE %8 ID %8 CODE ~G’in
“+%
=[~
~]
41T1
I I JI
A-ilm
42mri-1 ~
●63
●59 CODE ●69 1D ●61 CODE “62 ID
~lMri,t
r-i-l
2sl-il
m
~]#.llnnmL
~
T*
~)
TtiWL
ALARM
36wl Fi
iwlm
?
A.==
*..
II
~-
-
IAmmm
.— . .._. .
i%lildbt
—
●69
CODE
70
-——--—
--—-
ID 71--—CODE 72 ID
49~–1[[1
S7[I-[111
W[ll[llqll[lll{
——
S1{III[159111111W
-
●73
[ll&lnlW
——
ITraulds
—
TIM8Mt
6217
ml q“l
IT
——
———
63~{lll]611illllw9YPuIbm
m
I
I
I----“81
F-D@
m
m
m
m
m I I
m D
m m
CD ml
m ml
m El
I
1“40
1“41
F- Digit w
Digil
Annd STAY m
Tti8tosotorov9nt
bgruat
Evontlog50% &W%fulI
Event log ovorfbw
m
ml
m
Iil
m
m
m
-4s-
765
PARTITION-SPECIFIC
PROGRAM FIELDS
(me
tti paw fortheptitions used tn the insWatiin.)
10 program these flelda, enter a partition-speclfk
field nurrber.
To aeleot the next partltlon, press “91.
To return to the gtobal program fields, press “99.
—.- —.—--- -..
PARTITION
@_
●O9
ENTRYDEIAY #l
●lo
EXIT DELAY*1
●11
“12
’13
PARTITION
‘0s
ENTRYDEIAY #2
m
ml
@] (@t6-
Klmls-lsoomnm
811
EX17DEIAY 82
~]
fm,pt,9mats~,
812 EXITDEIAY m
AIARM SOUNDERDURATION
pq. ~411Uumstiu
CONFIRMATIONOF ARMINGDNG
1~:
[~
’13
n
“16
15a0ml’dC)
[ –[–] ~]plsh
15su4nds)
m
p4). MMllUn4-brtA
OF ARMING DNG
CON-m
1~
n
~]
“22
%s39
●23
MULTIPLEAIARMS
D
“29
“32
QUIOKARM
c1
[w-t[Iqat bm
PRIMARYSUBSCRIBER
AOOT#
“23
“2s
“32
PRIMARY
SUBSCR8ERAooT#
EHiHiHm
(11-12)
mlmmlml
EfmrM
Enwro&oo;
W (11-16) [1S16161~
“38
INHIBITBYPASSOFAZONE m
Olsl:[oolfalzuna
(QFhalna}aflbby pmaq
●39
ENABLEOPEhlJCLOSE
REPORT
FOR S$JSTAUERCODE1~~
“84
SWtNGER SUPPRES~
m
01-lsti
[l* Mlakuw(d19all@bruL
“84
ENABLEDIALERREPORIS UCIDCJ
FORPANICS&DURESS
%3s83Dwaa
t~
pdm9b10]
●86
❑
“38
w
[1s151s
lsl
NHIBK BYPASS W A ZONE
ol-w;lootitiaolln(m%oqmb~
m
SWINGER
suPmsloN
m
“39
01-lsdmm[l* Mmtbw=[mbruL.
●87
“87
●88
Io21wls-
AIARMsmNDmmtRATm
ol-lsmz~
1
l-almbk~[o+l]
’85
FIELDS
“lo
m
“22
m
ENTRYDEIAY M
mwls-ls~,
lssaOmld@
PROGRAM
#_
r“
ol-ls DlN92~
“16
——- ——. —-— -—. —PROGRAM FIELDS
BURG.AJARMCOM$ADELAY
●88
1~1
l-16~@l10dd9y]
“90
I*43
SECONDARY
SUBSCRBER
AOCT#
“90
DDlrHil
lilcilmlml
ErIwH,
Emrm
6$ (11-15 [1S1S161~
❑
EWmPERM.M~
I=oMM~]
EF[ll-lQ
[161s1514
1~
1*43
ENABLEPERM.BKKIBHT
1*45
ENABLEm~
ANNW. DURING EXKDEIAY
1~~]
1“47 ENABLEWIMEANNUN.
oNExlERNALALAm souNDER
1“47
ENAB1.EcHIMEANNLJN. c1
cME%lmNALAIARMsouNDER
1“52 OANcELREPoRTREsmcmN
1“52 cmcELREPm7REsmcmN
c1
ldmmmwmpmiwl!somripmiodalty]
1“45
ENABLE OONSOLE
ANNUN.
Cl
t~
~]
DURINGEXITDELAY
❑
n
l-nolB8mCmn;
[odtm EWTWULnu
Paiod0rW
2*18
-46-
ENABLEGOTOFORTHBPAR7mON D
ldrnbk;fOdubiO]
2’18
❑
•1
t~~I
1~
~]
pdimbb]
ENABLE
GOlOFORTHISPARTllWN c1
1~
p=dlnbb]
OG
●
.---.—.
---- ------ .-—. —.... .. .
..—
-.....—_.. —-. ..—-.-.
*U
..----— —..-
1
lFoRRFsuPERwsm
I
I
.
- -. . ...-
- ..-. .-—..--—. .
-47-
287
COMMUNICATION
DEFAULTS
“45
mktmv FORM4T
“46
LOWSPEEDFORMAT(Prhary) ~/ir&meuIJNx
“47
SEOONOARYFOWAT
●46
●49
~
for
o ~LW2@d
•1
SPEEDFORMAT(SarA)
no ~m2p48d
/-jg M8nwm2Pnd
ONECKSUMVERIFIOATON
M~
am
-~
“50 SESOOARADIONICSSELECT ~
AMRM REPORT CODE & ID DIG1=
“5510
“54 CODE
1 ~(
“57 ID
3 ml
5 Im’
m
[ml
T-
~]
[ml
Tlbbmt
am
,
l%
C!iiicl
m
J
**m
m
ml
~
““m -——
m
m
E!EJ
m
74 CODE
m
rw[
010 J
Em
ImI
ml
Im
KILl
m
tml
m
m
a!i
“77ID
ml
I&l
43iiiIlIziKl
m
P&J
rum]IzEl
f’J4mlEiEl
21F
m-”
●
iIl——
m-”
w
m
m
Tmwo
web
TmlAb
00
TIM8ML
m00
m00
+*
~
ma
m
IAfll
1234S87
-48-
S
Em
e 10
=m——
‘s1
~
la”
00
ml
bwsd!ory
bws@ti.
Aclsss
m
lwJ
%2
Suar)igll
El
ml
G
&l
m El
m
EiiiIl
Eiiin EEl
m
E
la
m EiEJ
ml
00
zoNE7YPEs9&lo
ABuIa8d
71 OOOE “nlo
FJ
Tom
●8O
EEI E!El””
Em
—— m’-
73
g,-”
L010 Ilmutlb
m G1
m ml
m
I&l Giir
m
m
Eii!Il
r%
ITiFlm
Ao~
9“ dliii?iifirm
Elm
“63
&
00
00
CODES
●62 10
“61 CODE
12iEl
au
Uy$mm
EiLEl
m laml m
&l
m
m
lml
00(1
ml
El--
Tlu@nCalsUM
EiiiEl
El
19pJ3J ml
apiiq
I
>
ALARM REPORT CODE ‘& ID DIGITS FOR ZONES W=64;
“86000E 701D
“64CODE “65 IO
“68
“66000E “67IO
Iml
REPORTFORsEmNDARY
26[-1
EiEHml
m
7 ~j
“6010
“58
m“”
m
%3
mmmmma~
A&trlwrrxTfum@au
sTmmRoExPANoEo
~
FOR ZONES 1-32 & SUPERVISOR Y & RESTORE
m
El
6 1=1
%2
bOm
STANOAROEXP
ANDEDREPORTFORPRIMAFW
AJmmlR8um
00
&l
ml
4 Jml
(“94”80
EIEIEIEIEI
m
G1
ml
2~
LOW SPEED FORMAT
“51 DUALREPoRnNG
00
TIW*L
00
6rml
~ihattu
ADEMCO
EXPRESS
FORMAT
(*94*81)
~ful
“45
“51
“46
“52 sTmDmDExPANDEDREPORT
FORPRw
DUAL ~
EIEmml
EI El-’-
“47
sRBuXTrbIXWRa
“48
●49
●5O
sEscaARADloNlcsSELECT
m
Rdhfiu
“66
●75 ID
m
m
EiiEl
II!EI
m
IzEl
77s)
76
●81
Ciiaml
mm
mm
mEiEJ
mm
ml
F-
“
010
d
@!Il
LowSaltuy m
&w8d Ra. m
ACbu m
m
NoTlE6:D7=
Pdbap3haltm &m9RcvRnotmahh168wWnhmr
$ipm18.
a?kel-RcvRnotm8pmdng. waunn. mPuul
frog.
m
To8t m
FQwt m
m
b
Tampw
U!Ll
4
m
~
%“’~y4jylJfy,y1 ,~
12s4s07
“60
MuETYPEs@&lo
A8udd
8
ma
# 10
-49-
285
“45
COMMUNICATION
PRIMARYFORM4T
“46
W
●47
SECONDARY
FO%AAT
DEFAULTS ior
~
~Hi#lm
❑
SPEEDFORMAT(l%nq)
ADEMCO
“51
%2
HIGH SPEED FORMAT
DuALREPORw@
(“94”82)
m“
sTANDAmQ@ANoED REPOmFoRPRhMRY
2 ~Wgh3pnd
c1
●53
sEsco&RADlmlcs
“50
~ALARM REP
110111
21
co
10101
0121 I 0101
F-1 Rd-
SELEOT
&D
DII=O
9! 013 I I 010 I
10I 013 I I 0101
ON
CODES
!ID
—— ’63
I I o
I 011 I*W
171014
I 010 hlWbb
1610]4 I I 010 I
7-.
Hi &“-
Ezl 12im7 T& k,
IziiIl EiG--——
211 014
I 1 010 I
. . ----
.- -
------
;Y%d
@iEmiEl
@imilIl
——
64LO161\OIO]
AURM CODES
“81
FM.
NON
12iE’1
Is!d
E!iizl
w
66[’[
m
m
13iEl
m
EiEl
d!!’
m
&
EziIl
IziEl
l.owB8ttory II@l
13wB8tR66. m
AOLD66 m
NoTEs97= PadLoap8h0m85a80-RcvRnm19aiVh6 tM6n40w
8ign816.
WJh91-RcvR Irolm6PondW,
b6clounn.
mPm181.
-U!!AJ
-EE1
-’m
Tampw
%g.
;#NE
TYPE RESTORE ENABLES
ZU4ElYPESla
Alordbd
❑
amammmm
1234567
●8O
zoNElvPEs@&lo
A261MM6d
-so-
6
Elm
10
@
.-—
iTtilW
Zim2i
El
——
016110101
10
IOIO16KIUIW
●iiIIEiiIl
flml=
m“’
“m EJ “m EEJ ~T’-’
511011 I 1 010 I
59i 016 t i 010 i
i OtO
-~-v-~t-r-,
----——
-’j
——
IiIllm
“77
291014110101
010
w
IzEl
Izicl
IzEJ
UiLl
ml
DiiEl
m
●45
COMMUNICATION
PRIM4RYFORMAT
“46
LW
DEFAULTS for ADEMCO’S CONTACT ID FORMAT
MalUlcalwl
“51 DLJALREFoRnNG
❑
SPEEDFORMAT(Prinsry) ❑
●47
SE~DARY
●46
LW SPEEDFORMAT(See)
“49
CNECKSUM VERFWm
No&mdLun
~T
•~cmmau
1 0101
A@wIRo&
●53
mm
m~
10I 1101 10101
STANDARDEXPANDED
REm
III”
FORPRMARY
mmmmmm~
❑
●5O SE~~lCS
SELECT
n
ALARM REPORT CODE & ID DIGI=
21 0121
●52
(W4*83)
BYPMs Tfu@ICISlaWBm
sTAND~ANDED
REPORT m
sEcoNoARY
•mmamm’~
hwIIIm~TIUWLawW
~
FOR ZONES 1-32 &_SUPERVISORY k @.ESIoW _~DES
I
010 lTmIUD
181 0[3 I I 010 i
IImEl
241
ID DIGITS FOR ZONES 3344
36101 I]olol
——
w
——
m
m
m
41[4jlo[o
———
——
J
[Olo]opa
w
14111
m
m
m
ORT CODE & ID D
“7610
77 ID
13!zl
Eiiil
m
13irJ
El
ml
ml
ml
El fwsl
m
m
“78
m
01
60[1[5110101
———
10101
61~011110101
——
SYSTEM
AhlllRu
~’1-
IziiEl
ml
m
621017 jlolo[
——
(1+8)
ml
EiiEl
b
Ssttory
Iswsa Ra.
ACLoss
aR2sior2
Test
14!Ll
Eim
ml
m
_
IT
, ~
w
m
m
m
~]
Pow2r[mm
tiram
lProg.Tamper ~
>I?
PE RESTO E ENABLES
[ 010 I
[Ololewal
10IOleypnrru
This equipment has been tested to FCC requirements
the
and has been found acoeptk
for use. The FCC requires
followingstatementfor your information.
generatesand usesradiofrequency energy and tf not installed and used property, that is, in strtot
aooordanoe
withthe manufaoturet’s
instructions,
mayoauseinterferenceto radio andtefevisiinrecetiion.It has
been type testedandfoundto oompfywith the Iimitsior a Ctass B co~ting
device in aooordanoe with the
in SubpartJ of Part 15 of FCC Rules,Wkh are designedto pnwidereasonableprotectionagainst
speoifiiions
suti interferenceh a residentialinstaltatiin.However,thereis noguaranteethatinterferencewillnotoocurina
particularinstaftation.tfthisequipmentdoesoauseinterferenceto rado or televisionreoeption,whii oanbe
determinedby turning the equipment off and on, the user is encouraged to try to oorrecfthe interterenoe by one
or more of the followingmSSSUreS:
tfusingan indoorantenna,havea qualityoutdoorantennainstalled.
s Reorientthe receivingantennauntilinterferenceis reducedor etirninated.
“ Movethe receiver away from the oonfmlkormunicator.
This equipmenf
●
“ Move the antenna feads away from any wire runs to the oontro14mmnunicator.
“ Plug the controlbornmunioator into a different outlet so that if and the receiver are on differentbranchoirwits.
If necessary, the user should oonsuttthe deafer or an experiencedradioltetevisionteohnioianfor additional
Suggestions.
The user or i~ta[ler
msy find the following booklet prepared by the Federal
Comrnunicafkm$
commission he~ul:
“Interference Handbook”
This bookfat is availabta from the lJ.S. Government PrirtWgOffice,Washington,DC 20402.
StookNo. 004-000-00450-7.
The user shallnotmake any chsngesor rnodifiibna to the equipment unless authorized bythe Inefaltatiin
or LJseFs Manuaf. unauthorized changes or modifications 00u1d void the user’s authorfty to OpWSte
Instruotiona
IN THE
In the “event
of
EVENT
OF TELEPHONE
telephone operatbnal pmble~,-ditinne~-
OPERATIONAL
PROBLEMS
the 00ntrol pa-~l by removingthe pfug fIbWIthe
RJ31 X (CA38A in Canada) wall ja~.
We r~mrnend
that you demonstrate rflsconnecthtg the phones on
installation of the system. DOr@tdsoonneotthe phoneoonnectiinin&dethe ControlPanel. Doingsowfllresult
in the loss of your phone lines. If the regular phone works oorrectly after the Control Panel has been
disconnected from the phonelines,The ControlPanel has a problemand shoutdbe returnedfor repair. ff upon
disconnectionof the Control Panel, there is still a problem on the fine, notify the tefephone oompany that they
have a problem and request prompt repair servioe. The user may not under any oiroumstanoes (in or out of ““
warranty) attempt any service or repairsto the system, ttmust be returnedto the faotoryor an authorizedaervioe
agency foraflrepairs.
-52-
CAN~AN
~mT
(DOC)
W
CO-CATIONS
STATEMENT
The Canadian Department of Communicationslabelkfentitiescertifiedequipment.This certificationmeans that
the equfprnenl meets certaintelecommnhcationsnetworkprotective,operationaland safety requirements.The
I
I
~m
does notgwamee the equipmentwiiloperateto the users satisfaction.
Beforeinstatingthis equipment,usersshoutdensurethat it is permissibleto be connectedto the facilitiesof the
focal telecommunicationscompany. The equipment must also be installedusing an acceptablemethod of
connection.In some cases,the conqmy’s insidewiringassociatedwitha singleline individualservicemay be
extendedby meansof certifii connectorasserWy (telephoneextensioncord).The customershoutdbe aware
thatcomptiincewiththe aboveconditionsmaynotpreventdegradationof serviceinsomesituations.
Repairsto certiW equipmentshouidbe madeby an authorizedCanadmnmaintenancefacilitydesignatedbythe
sup~~er.Any repairsor alterationsmade bythe userto thisequipment,or equipmentmalfunctions,maygivethe
telecommunications
companycauseto requestthe userto d-nnect the equipment.
Usersshoukfensurefortheirown protectionthatthe electricalgroundconnectionsof the powerufiiii, telephone
lines and internal metalfii water pipe system, if present, are connected together. This precaution may be
particutmtyfnpxanf h rurafareas.
Caution: User shouid not attempt to make such connectiina themselves, but shoufd contact the appropriate
eiectrfc inspadon authority,or electrician, as apfnpMte.
(LN) assigned to each terminal device denotes the percentage of the total bad to be
connectedto a tebphone ioopwhich is used by the device, to preventoverioadng.The terminationon a bq
mayconsistof anycombinationof devicessubjectontyto the requirementthatthe totaiof the LoadNumbersofall
the devicesdoes not exceed 100.
~
LWquette du miniatr&Jre
des Communicatiis du Canada ktentifie la mat~riel t@rmbgu6 Cette dtiquette certifii
que Ie mafdriel eat conformsA certainesnormesde protection,dexpbitation et de s6curitddes r6seauxde
Le minist&e n’assuretoutefoispas que k matdriel fonctionneraA is satisfactionde
t6i&Xmununicat”ions.
f’utitisateur.
Avant d’instaiiercs mat&iel, t’utiiisateurdoit s’assurerqu”ii est permis de ie raccorder eux installafbns de
t’entrepriaefocafede t#6comnunication. Le matdriei doit dgaiement dtre instaffd en auivant une nWtod accept6e
de raccordement. Dans ce~ins cas, ies fus int6rieum de t’entrepriaeufifis6s pour un service indiviiel a iigne
unkquepeuvent We probn@s au moyen d’un d~itit
homoiogudde raccordement(cordonproiongateur
t6i4phon@e inteme). L’abonnene doitpas oubiier@ii est possibfeque is conforrnifdaux conditbne dnorx%es
I&daaaus n’arnpkhant
pas ta @gradationd servicepar certainessituations.Actueltement,tes enterprisesde
tWcomnunicatbn ne permettentpas que ron mccordafeur mat&iei aux jacks d’abonnds,aauf dana ies cas
x*wM-wmkm*msmLee reparationsde matdriel homobgud doivem dtre effectu6espas un centre d’entretiencanadienaufhorisd
d6aign6par fe foumiaseur.La conymgniade Wcornmunfcationepeufdemander~ I’utifiieur de d&wmcher un
apparsdl ~ la suite de r@arations ou de modifications eftectu6es par Wtiii$titeur ou A cause de mauvais
fonctbnnement.
Pour as propre protectbn, f’utifiaateurdoit s’assurer qua tous ies tiis de mise h is terra de is source deneI@s
s’iiy en a, sent raccord6senaenbie.
6iectrique, dea iignea t61@hmiques et des canafiaafbna d’eau mdtaftiques,
Cetteprecautionest particufiirementhrqmrtanteclansies r6gbnamales.
AvertlaaemeftC L’utitiaateurne dolt pas tamer de faire ces raccordements tuiitime: il doit avoirrecoursA un
aewiced’inspectiondes fnstaliatbnsdfectdques,ou Aun 4ectrbian, aebn fe caa.
~lC)
aaaign6A chaquedispoaitifterminalpourMtertoute surchatgeindiiue ISpourcentagede
fachargetotaiequi peut &re mccwde4 A un citwft t&@honique boudd ufifii par ce dqsitif. La terminaisondu
drcuff bouci6 peuf We conatftude de nln’qwte quells oo~naieon de diapostiifs, POUIVUque is aomme des
indices de charge de f’enaeti
des dispositifsne ddpaaae pas 100.
1
I
-s3-
,
WARNING
THE LIMITATIONS
OF THIS ALARM SYSTEM
Whflethb systemis an advanceddesii aeouritysystem,it doesnotofferguarameectpmteotionagainstburglary,
fii or otheremergency.An afarmsystem,whetheroomnvsrcial
or residential,is subjectto wnpromise or failureto
warnfor a nunlw of raasons. For exarrtpte:
s Intruders may gain aooeas through tmpmtecfed openings or have the technkal sophisticationto bypass an
atarmsensorordisoormad analarm-devbe.
c Intrusiondeteotora (e.g. passive infrared detectors), smoke detectors, and many other sensing devices will not
work without power. BatteIY operated devices wilt not work wtthoutbatteries, with dead batteries, or ffthe batleries
arem~~p~~.
~~~titi~~AC
til MWAtit&ir
X~r-k@titira~
reason, however briefly.
c Siinals sent by wiretesstmsmfttars may be bbcked or reflectedby metal before they reach the alarm reoeiver.
Ennfltis@ml
@h~hn~ti@ti@
movedimothe path.
~~a-t-,
_~n
Wrtia-al~k
c A user may not be able to reach a panio or emergency button quicktyermugh.
While smoke detectors have played a key role m reducing residentialfire deaths in the UnitedStates, they may
not actiie or provideesrfywarningfora varietyof reasonsinas manyas 3S%of atlfns, accordingto data
●
publiihed
by the Federal Emergency Managemem
Agency. Some of the reasons smoke deteotors used in
conjundionwiththis System may not work areas Ioltows. SMOke detectors may have been irrtproperfy instatfecf
and positioned. Smoke detectors may not sense fires that start where smke cannot reach the deteotors, auoh as
in ohimneya, in waffs, or roofs,or on fhe other side of obsed doors. Smoke deteotorsalso may not sense a ii on
another level of a residenceor buflding.A saaxxt fbor detector,forexampfe,maynotsensea fii fbor or
basement fire. Moreover, smoke deteotom have sensing limitations. No smoke deteotor Oan Sense every kind of
fire every time. In general, detectors may not atways warn about fries caused by oareleaaness and safety hazards
Iiie smoking fn bad, vfofanf expfosbns, eaoap&lg gas, Irrpmpar storage or fkrnmabla materfsk, overbadad
elactrioal cirwfts, chfkfren playing with matohes, or arson. Depending on the nature of the fire Sm@Orthe Iooatbn
of the smoke deteotors, the deteotor, even If it operates as antiited,
may not provkte aufficknt warning to albw
all ocoupants to esoaps intimeto preventinjuryor death.
Passive Infrared MotionDetaotorsoanonfydeteotintrusbnwfthinthe designedrangesas d~rnmed
intheir
installationmanual.Passive Infrared Detectors do M provide votumatrfo area protedbn, They do oreatemuttiple
beams of protection, and intrusbnoan onlybe deteotedin unobstructed
areasooveredbythe beams. They
behimt wafk, oeilings, fbora, ofoaed doors, glass partftbns,
Cannotdetect rnotbn or intruabn that takes ~
9kss doors,orwfndows.Meohanioattawrfng, maskfng,paitiiru or sprayingof anymaterialonthe mirrors,
windows or any part of the optioalsystem oan raduoa their deteotionability.PassivekdraradDeteUorasense
of the proteoted area appmaohs the teqwrature
changesIntemperature:however,as the ambientte~rafure
oandeoraase.
range of 90° to 150”F,the detactbn perforrnanoe
-wmiqw~m~am,
bkamm~m~fi~
~mq~m-am~
on~eo*r*
@a**or~~n~.
H_**mtiona
*mm
Wl@tim*m
fmm the bedrooms,thenthey are leasIikefyto wakenor @aftpeopleInsidethe bedmoma.Even paraww wtm are
●
●
Xemymt~arti
wa~Utitimk
~~m~~a
S~,
Xm~rti~r~~,
ti
pa@a or waken
by pSSSi~ tMffii. FinSfty, aiarrn _
devbes, however bud, MSY nOt WSrn ha~
deep sleepers.
Telephonefinesneededto transmftalarmsignalsfmm a pre~s to~ oentrafmonitoringatatbnmaybe outof
servbe or temporalityout of servioe.TefephonaIii are alsosubjectto compromkeby aophktfeatadIntmders.
Even if the systemrespondsto the emergenoyas intended,however,oooupantsmayhave hwffbient timeto
proteotthemselvesfmm the emergencysftuation.Inthe oaaeof a monftoredalarmsysfem,authwttksmaynot
respondappropriately.
This e@pment, likeothereieotrbaldevioes,is subjectto oonponentfailure.Eventhoughthisequlprnetiis
Ooutilairat anytime.
designedtolaat as bng as 10 years,the ekotmnk Oorrponents
The mostoommonoauseof an @armsystemnotfunctioning
whenan intrusionorfn oooursis badeqmm
msfntena~. This alarmsystemshouldbe testedweekfyto makeauraaftsensorsare workingcmperfy.
I~~~a_*emmy
tiem~*tirtimH
*-,
~m-*em
Sma~e
for Insuranoe.Homeowners,propertyownersand reweraahoukfoonthweto aotprudentfyin protecting
tharnaefvesand oontinueto insurethefrfivesand property.
We oontfnueto devebp new and improvedproteoffondevkes. Usersof alarmSySteIJtS
owe Itto fhemsefvesand
Jheir bved ones to learn aboutthese develornnants.
●
●
-s4-
w
ADEMCO
LIMITED
WARRANTY
Alarm Device Manufacturing Company, a Dwisiin of PittWay Corporation, and its d~lons,
subsidiaries and affiliates (%eller),
165 Eileen Way, Syosset, New York 11791, warrants its products to be in conformance with its own
plane and spaMoations
and to be free from defects in materials and workmanship under normal use and service
for 18 monthsfrom the date stampcontrolon the product or, for products not having an Adernco date stamp, for
12 months from date of orlghal purchase unless the installation “hstructions or ~abg
sets fotth a Shotter period,
in whichcase the shorter period shall appfy. seller’s obligation shall be limited to repairing or replacing, at its option, tree of charge for materials or labor, any product whch is proved not inmrrpliancewithSellersspecifications
or provesdefectivein materialsor workmanshipunder normal use and service.seller shall have no obfiitkm under this Limited Warranty or otherwise if the product is attered or improperly repaired or serviced by anyone other
than Memco
factory service. For warranty sewice, return product transportation prepaid, to Ademco Factory
Service, 165 Eiieen Way, Syosaet, New York 11791.
THERE ARE NO WARRANTIES,
EXPRESS OR iMPLiED, OF MERCHANTABiLiTY,
OR FiTNESS FOR A
PARTiClfLAR
PURPOSE OR OTHERWiSE,
WHICH E~END
BEYOND THE DESCRIPTION
ON THE FACE
HEREOF. iN NO CASE SHAU SELLER BE LiABLE TO ANYONE FOR ANY CONSEQUENTIAL
OR incidental
DAMAGES FOR BREACH OF THiS OR ANY OTHER WARRANTY, EXPRESS OR iMPLIED, OR UPON ANY
OTHER BASiS OF LiABiLilY WATSOEVER,
EVEN iF THE LOSS OR DAMAGE iS CAUSED BY THE SEUER’S
OWN NEGUGENCE
OR FAULT.
Baiter does not represent that the pmfucts it seiis may not be compromised or circumvented: that the products
wifi prevent any personal injj~ or property toss by burglary, robbery, fire or othemvise; or that the products wifi in ail
cases provide adequate warning or protection. Customer understands that a property inataifed and maintained
alarm may only reduce the risk of a bu9tafy, robbery, tire or other events occurring without providhg an alarm, but
if is not insurance or a guarantee that such wifi rmt occur or that there wili be no personai injury or propady bss as a
reauft. CONSEQUENTLY,
SELLER SHALL HAVE NO LiABfLiTYFOR ANY PERSONAL fNJiJRY,PROPERIY
DAMAGE OR OTHER LOSS BASEDON A CiAIM THE PRODUCTFAiLEDTO GIVE WARNING.HOWEVER,iF
SEUER iS HELD LiABLE,WHETHER DiRECTLYOR indirectly, FOR ANY LOSSOR DAMAGEARiSiNGUNDER Ti-ffS LIMfTED WARRANTY OR OTHERWfSE, REGARDLESS OF CAUSE OR 0Ri(3fN, SELLER’SMAXiMUM
LiABiLITYSHALLNOT iN ANY CASE EXCEEDTHE PURCHASEPRICE OF THE PRODUCT,WfiCH SHALLBE
THE COMPLETE AND EXCLUSiVEREMEDYAGAfNSTSELLER.Ths warrantyreplacesanypreviouswarranties
and is the onlywarrantymade by Selleron ths product.No increaseor afteratbn,writtenor verbai,of the obligationsof thw LimitedWarrantvis authorized.
w
u6euv2mQ
on@YmgMolal
ullwN~