Download FC2250 Series

Flatbed Cutting Plotter
FC2250 Series
Advanced Flatbed Cutting Plotter on Cutting and
Creasing Applications.
Packaging
Cardboard
E/F/G Flute
Traffic Sign
Offset Print
High-intensity
Reflective film
Garment Shoes
Pattern
Blanket
Print & Cut
Label
Monument
Sandblast resist
rubber
6 models are available, differ in sizes and hold down methods.
The built-in Automatic Registration Mark Sensing system further simplifies contour cutting of printed
materials. Incorporates ARMS to ensure precise cutting. Cut decals & other P&C application with ARMS.
A tool lineup for cutting of thick paper and corrugated cardboard E/F/G grade.
Fulfilling the max high pressure 1kg, and enables you to cut thick material.
A USB2.0 interface.
Software applications that improve work efficiency.
Achieves a best-in-class cost performance.
Flatbed Cutting Plotter
FC2250 Series
Applications
Advanced Technology for Plotting, Cutting and Creasing Applications
Monument
Garment Shoes
Pattern
Traffic Sign
6 models are available. Each model has
different table size and hold-down methods,
allowing you to select a model which meets
your needs.
FC2250-60VC 920x610mm,
FC2250-120VC 1200x920mm,
FC2250-120ES 1200x920mm,
FC2250-120MG 1200x920mm,
FC2250-180VC 1740x920mm,
FC2250-180ES 1740x920mm,
Cutting Master 2
This plug-in software allows direct cutting
from graphics applications. For higher
productivity, create graphics or text in Adobe
Illustrator or CorelDraw, then simply output
directly to the plotter.
USB 2.0 interface making a plug and play.
Layout instructions are sent
together with the cutting data
for designs printed using layout
functions such as set in a RIP,
enabling continuous detection
of registration marks for cutting.
This feature is excellent when
high accuracy is needed when
cutting an array of copies.
Four-point registration mark sensing and X/Y-axis correction
uses high-precision positioning to ensure accurate cutting of
graphics that have been skewed or distorted during printed.
Data
Cut
Skewed/distorted
printed graphic
Graphtec two-axis corrected
cutting
Conventional single-axis
corrected cutting
Segment area correction
The intermediate registration marks in horizontal direction are
detected to allow four-point correction for each individual
segment area. This enables high-precision positioning of the
whole area of prints that skewed during printing process.
OS version
• Windows, 2000, XP, Vista
• Mac OS X, 10.2 or later
Software version
• Illustrator for Windows 8, 9, 10, CS,
CS2, CS3
• Illustrator for Mac 10, CS, CS2, CS3
• Corel DRAW 10, 11, 12, X3
Cutting data sent
to plotter with
layout instructions
1cut
2cut
3cut
4cut
• Output in separate layers or separate colors can be specified.
• Output conditions can be selected by layer name or color.
• Supports a sorting function to minimize media movement
• The Weed Border cutting function enables automatic output of
a border to facilitate weeding of the cut media.
• Any drawing exceeding the plotter’s Valid Area can be output in
multiple pages using the Tiling function.
• Output conditions can be managed by media name.
• Matrix Copy function
• The Cutting Simulation function enables checking of the cut
sequence, changing of the cut sequence, and tiled cutting prior
to actual output.
2-Tool Mounting for Easy Switching
Two tools can be mounted at the same time for easy switching. If you
mount the cutter plunger and the creasing tool at the same time, you can
perform both cutting and scoring operations without having to exchange
tools.
If you mount a plotter pen, you can draw check plots before commencing
the actual cutting.
Simple creasing function
A simple creasing function to create fold lines for clean folding on
microflute and cardboard has been enabled.
Automatic registration mark detection
Patent
pending
Versatile software D-Cut Master
This software reads a DXF file in the AutoCAD R13 format
and then enables data display, deleting, sorting, changing
of the output order, specification of output setting, and
saving functions as well as creation of GP-GL plot data
and output to a plotter.
Creasing functions
Multiple registration
mark correction
Four-point registration mark
(two-axis skew) correction
Print
The powerful ARMS (Advanced Registration Mark
Sensing system) feature simplifies contour cutting of
printed images as well as significantly improving overall
productivity for contour cutting items such as labels or
stickers.
ARMS will automatically read several types of patterns.
• Direct output from the software
• Output by layer / color
• Possible to check the cutting lines by preview
window
• Multiple over cutting is possible
• ARMS can be controlled by software
• Centering, Rotate, Mirror for easy layout
• Matrix copy for higher productivity
• Auto-welding for binding same color of shapes
• Tiling / Paneling for segmentation of cutting
Label
Main functions
Main Features
Includes speed up to 400mm/sec (16 in/sec) and 2 pens as standard equipment.
Print & Cut
Blanket
Includes a range of software applications that improve work
efficiency and simplify operations.
Fulfilling the max high pressure 1 kg enabling you to cut thick material.
ARMS
Cardboard
E/F/G Flute
Offset Print
High-intensity
Reflective film
Vacuum suction
Vacuum suction
Electrostatic adhesion
Magnetic
Vacuum suction
Electrostatic adhesion
Advanced Registration
Mark Sensing system
Packaging
Sandblast resist
rubber
The first registration mark is detected
automatically, eliminating the need to position
the head to the registration mark manually.
Subsequent registration marks are
automatically redetected even if marks are not
immediately found, saving the time of starting
over.
• Up to three fold lines can be selected.
• Spacing between the lines can also be specified.
• Repeated creasing can also be specified for each line.
How to determine the number of creasing lines
Single-line creasing
Materials of a thickness of up to 0.1 mm
Double-line creasing
Full software support
Registration mark commands are
provided to control ARMS functions from
your software applications such as the
Cutting Master 2.
Cardboard of a thickness of approximately
0.1 to 0.5 mm
• Cutting Master 2
Triple-line creasing
Line spacing
Corrugated cardboard of a thickness
of approximately 0.3 to 0.5 mm (rigid cardboard)
Specification
Model name
Configuration
- 60VC
VC
Media hold-down method
610 x 920 mm
24.0 x 36.0 inch
Effective cutting area
Maximum medium width
Number of pens / cutters
Maximum cutting speed
Cutting force
Minimum character size
Mechanical resolution
Programmable resolution
Cutter and pen types
- 120VC
- 120MG
- 120ES
- 180VC
- 180ES
Digital servo, Flatbed
VC
MG
ES
VC
ES
VC model : Vacuum suction *1 , ES model : Electrostatic adhesion , MG model : Magnetic
1200 x 920 mm
1740 x 920mm
47.2 x 36.0 inch
68.5 x 36.0 inch
1010 mm (43.3 inch) (Y-axis direction)
2
400 mm/s (16 inch/s) (40-step range)
Pen 1: Max. 4.9N(500 gf), 40-step range (1 to 40), Pen 2 : Max. 9.8N(1 kgf), 40-step range (2 to 80)
About 10 mm square (varies with the character font and media)
0.0025 mm
GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ *3 : 0.025 mm
Cutter blades : Supersteel, Pens : Water-based fibertip, Oil-based ballpoint, Disposable ink *4
Marking film (vinyl, fluorescent, reflective), Stiff paper/card up to 0.5 mm thick,
Sandblast rubber sheets up to 1.0 mm thick, High-intensity reflective film, Polystyrene foam sheets
Cutting media
Interfaces
Command sets
Buffer memory
Distance accuracy
Repeatability
Perpendicularity
Power supply
Power consumption
Operating environment
Guaranteed precision
Level
External
dimensions
(H x W x D)
60degree inclination*2
Weight (including stand)
857 x 920 x 1285mm
33.8 x 36.0 x 50.6 in.
approx. 58 kg
128 lbs.
RS-232C, USB 2.0 (full speed) ; auto-switching
GP-GL and HP-GL™ *3 emulation (selected by menu)
2 Mbyte
Within ±0.1% (plotter mode)
Within 0.1 mm (plotter mode)
Within 0.5 mm/900 mm (plotter mode)
100 to 120 VAC, 50/60 Hz; 220 to 240 VAC, 50/60 Hz
100 W or less
Temperature: +10 to +35 deg.C, Humidity: 35% to 75% RH (non-condensing)
Temperature: +16 to +32 deg.C, Humidity: 35% to 70% RH (non-condensing)
944 x 1568 x 1285 mm
37.1 x 61.7 x 50.6 in.
1687 x 1568 x 987 mm
66.4 x 61.7 x 39.0 in.
approx. 69 kg
152 lbs.
944 x 2068 x 1285mm
37.1 x 81.4 x 50.6 in.
1687 x 2068 x 987 mm
66.4 x 81.4 x 39.0 in.
approx. 74 kg
163 lbs.
*1 A vacuum pump is not provided with VC models.
*2 The writing panel on VC models cannot be tilted.
*3 HP-GL™ is a registered trademark of the Hewlett-Packard Corporation of the United States.
*4 Disposable ink pens cannot be used with the high-force pen.
Supply
Item
Cutter blade
Creasing
tool
Cutter blade
Water-based
fibertip pen
Model
PHP31-CB09-HS
PHP31-CB15-HS
PHP31-CB15B-HS
PHP34-CB30-HS
CP-001
CP-002
CP-003
CB09UA-5
CB15U-5
CB15U-5SP
CB15U-K30-5
CB15U-K30-5SP
CB15UA-2
CB15UA-K30-2
CB30UC-1
KF550-F8
KF550-S1
KF551-RD
KF552-BK
KF555-BL
KF556-GR
Contents
Used with 0.9-mm diameter cutter blades (CB09UA-5)
Used with 1.5-mm diameter cutter blades, comes with one tube of grease
Used with 1.5-mm diameter cutter blades (CB15U-5SP, CB15U-K30-5SP)
Used with CB30UC-1 cutter blade for thick media
For card board
For card board
For corrugated board
0.9 mm diameter, supersteel blade, comes with a spring, for cutting general film
1.5 mm diameter, supersteel blade, for cutting slightly thick film
1.5 mm diameter, supersteel blade, comes with a spring
1.5 mm diameter, supersteel blade, for cutting thick materials
1.5 mm diameter, supersteel blade, comes with a spring
1.5 mm diameter, supersteel blade, for cutting high-intensity reflective
3.0 mm diameter, supersteel blade, for cutting thick materials
1 pen each in red, black, violet, brown, blue, green, orange and pink
2 black pens and 1 pen each in red, blue and green
5 red pens
5 black pens
5 blue pens
5 green pens
Q'ty
1
1
1
1
1
1
1
5 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
2 blades/pack
2 blades/pack
1 blade/pack
8 pens/pack
5 pens/pack
5 pens/pack
5 pens/pack
5 pens/pack
5 pens/pack
The new tool lineup supports the cutting of thick
paper and corrugated cardboard from microflute through E-flute.
Cutter plunger for thick
materials
Cutter blade for thick materials
PHP34-CB30-HS
CB30UC-1
Creasing tool for cardboard
Creasing tool for corrugated
cardboard
CP-002
CP-003
Flatbed Cutting Lineup
Standard accessories
Item
Power cable
Cutter pen set
Water based fiber-tip pen
Sheet holder plates
Hexagon wrench
Height adjustment plates
Durable flexible hose
Description
PHP31-CB15B-HS, CB15U-2SP, CB15U-K30-5SP
KF552-BK
For MG models only (2 large, 2 medium, 4 small)
For M4 bolts
10 mm, 4 mm height
For VC models only, 1.5 to 5 m (can expand/contract)
Connection bore diameter: φ 38 mm (-60), φ 50 mm (-120/180)
Q'ty
1
1 set
1
1 set
1
1 of each
FC4200 series
A1/A2 size flatbed cutting plotter
1
Hose band
For VC models only, φ 38 mm (-60), φ 50 mm (-120/180)
Vacuum pump
installation base
For VC models only
1
USB cable (2.9m)
CD-ROM
CBL1112-2.9M
User’s manual, Driver, other software
1
1
2
FC4210 series
Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.
Specifications are subject to change without notice.
A1 size flatbed cutting plotter for
product packaging mock-ups
503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan
Tel : +81-45-825-6250 Fax : +81-45-825-6396
Email : [email protected]
Website
http://www.graphteccorp.com
FC200711105000AS Printed in Japan