Download Edge Racing Evolution Programmer Installation

08-09 6.4L Ford Power Stroke
Racing Evolution
Installing the Evolution (6.4 L)
The Evolution programmer connects to the OBDII diagnostic port of your
vehicle. Follow these steps to install the Evolution:
1. With the drivers side door open, detach the weather stripping at the end of
the dashboard. This will enable you to pull off the access panel that is
located on the left side of the dashboard. (see figure #1 & #2).
Remove the access
panel by pulling from the
bottom first, then work
your way up to the top.
Figure #1
Figure #2
13