Download 1 2

2MH/2MJ/2MK/2ML
5. Remove the transfer roller’s shaft from
the both transfer bushes.
6. Remove the gear Z16 from the transfer
roller.
Shaft
Transfer roller
Shaft
Transfer bush
Transfer bush
Transfer roller
Gear Z16
Figure 1-5-45
7. Check or replace the transfer roller and
refit all the removed parts.
Gear Z16
Caution: When refitting the transfer
roller, be careful about following point.
Push the release lever to raise the lever
end, then insert the front of gear Z16
under the release lever end.
Release lever
Transfer bush
Transfer roller
Transfer bush
Figure 1-5-46
1-5-31