Transcript
RM-AV3000 Quick Reference Guide Congratulations on your purchase of the Sony RM-AV3000 Integrated Remote Commander. Sony has created this guide to help you start using this product quickly. Sony Corporation © 2002 Printed in Malaysia Getting Acquainted. 3-245-584-11(1) 5 CHANNEL + / – Buttons scroll through channels. 6 RECALL Button jumps to the previous channel. 7 VOLUME + / – Buttons. 8 MUTING Button. 9 EXIT Button exits menus. A Clock Display shows the current time. B LCD Touch Key Display contains the keys that operate each component. These keys change, depending on the component under control. C Mode Display shows the remote control’s current mode and can also be pressed to change functions on the on-screen Label Keys. 0 MENU Button enters your component’s menus. qa OK and Cursor Buttons navigate menus and make selections. qs SYSTEM CONTROL Buttons enable you to run macros of up to 32 consecutive key operations in length. The MORE button cycles through other macros via the onscreen Label Keys. D Label Keys can have names up to 8 characters in length. You can cycle through different sets of labels by touching the MODE display key, or the OTHER, MORE or TIMER buttons. 1 Component Select Buttons directly select the most commonly operated components: TV, STB (digital satellite receiver), VCR, DVD, CD Player and Amplifier. The OTHER button cycles through other secondary components via the on-screen Label Keys. TV STB VCR DVD CD SYSTEM CONTROL 1 2 3 AMP TIMER OTHER COMMANDER LIGHT OFF MORE VOLUME CHANNEL OK 2 TIMER Button allows you to turn individual program timers on or off. MENU EXIT MUTING Moving Component Select Buttons and Label Keys. The RM-AV3000 can control up to 18 components. Although it comes from the factory configured for Sony equipment, it is also preprogrammed for most other brands of components. Included with your RM-AV3000 is a separate “Component Code Numbers” guide that lists all compatible brands. The RM-AV3000 is designed to operate up to 18 components, but chances you have are fewer than that. You will likely find it more convenient to re-arrange the components from their factory-preset positions, minimizing the need to cycle through the LCD-based Label Keys. If you have any non-Sony A/V components, complete the following steps. SETTING UP NON-SONY COMPONENTS. 1. Consult the tables in the supplied “Component Code Numbers” guide to find the four-digit code for your component. For example, a Philips TV corresponds to code number 8056. The first digit identifies the type of component (8 stands for television), so you will not need to reconfigure a Component Select button before entering a new device’s code. 2. While holding the COMMANDER OFF key, press MUTING. The word “SET” will appear on the LCD screen. COMMANDER OFF MUTING SET 3. Press the PRESET key. The word “PRESET” will appear at the top of the screen. 4. Select the component you would like to configure by pressing the appropriate button or LCD label. Once you’ve selected a component, the LCD screen will show the currently assigned code number. 5. Using the numerical keypad on the LCD screen, enter your component’s code number followed by ENTER. To erase an incorrect entry, press CLEAR. For example, to configure a Philips TV press 8, 0, 5, 6 and ENTER. After pressing ENTER your four-digit code and “OK” will appear on the LCD screen, accompanied by a beep. RECALL 8 0 5 6 3 LIGHT Button turns the LCD backlight on or off. 4 COMMANDER OFF Button turns the Remote Commander off. Setting Up the RM-AV3000 for your Components. For more information, please turn to page 6 of the Operating Instructions. Loading Batteries, Setting Time and Day. LOADING BATTERIES. The RM-AV3000 accepts four AA batteries. Slide open the battery compartment and align the + and – terminals according to the markings inside. Replace the cover. When changing batteries, the Remote Commander will not lose your programming. ENTER 6. To set another code, repeat Steps 4 and 5. 7. Press COMMANDER OFF to finish. 2. Select the day of the week. Use the F/f cursor keys to choose the day, then use the right cursor key to enter your choice. IF YOUR COMPONENT IS NOT LISTED. Even if your brand of component isn’t listed in the “Component Code Numbers” guide, you may still be able to find an appropriate preset. 1. While holding the COMMANDER OFF key, press MUTING. The word “SET” will appear on the LCD screen. 2. Press the PRESET key. The word “PRESET” will appear at the top of the screen. 3. Select the component you would like to configure by pressing the appropriate button or the LCD label. 4. Press the CHANNEL +/– buttons to search through all built-in code sets for this component category. 5. For each code number, aim the Commander at your component and press the POWER key on the LCD screen. If your component turns on or off, continue on to step 6. If your component does not respond, repeat steps 4 and 5. 6. Press the ENTER key on the LCD screen. A beep will sound and “OK” will appear on the screen. 7. Press COMMANDER OFF to finish. If none of the built-in codes operate your component, turn to the section Learning new infrared commands. For more information, please turn to pages 12 through 17 of the Operating Instructions. component will appear in the Mode Display key at the top of the screen. 5. While pressing the Mode Display Key (which will read “DVD” in this example), press the Component Select button or Label Key to which you would like to copy the component. The word “COPY” will appear on the screen and the components you are copying from and to will flash on the Label Keys (“DVD -> -> VCR” in this example). 6. Press the COMMANDER OFF button. Sony ha preparado esta guía para ayudarlo a que empiece a utilizar el producto rápidamente. Si posee algún componente A/V que no sea Sony, realice los siguientes pasos. Sony Corporation © 2002 Printed in Malaysia Para comenzar. 4 El botón COMMANDER OFF apaga el control remoto. AJUSTE DE COMPONENTES DE OTRAS MARCAS. 5 Los botones CHANNEL + / – le permiten avanzar y retroceder por los canales. 1. Consulte las tablas que figuran en la guía “Números de código de componentes” para buscar el código de cuatro dígitos de su componente. Por ejemplo, a un televisor Philips le corresponde el número de código 8056. El primer dígito identifica el tipo de componente (8 corresponde a televisión), de manera que no tendrá que volver a configurar un botón de selección de componente antes de ingresar el código de un nuevo aparato. 2. Manteniendo presionada la tecla COMMANDER OFF, presione MUTING. Aparecerá “SET” en la pantalla LCD. 6 El botón RECALL salta al canal anterior. 7 Botones VOLUME + / –. 8 Botón MUTING. DVD to VCR For more information, please turn to pages 48 and 49 of the Operating Instructions. Customizing Component Names on the Mode Display Key and on the Label Key. After moving components, the assigned names may no longer match. You can assign any label of up to 8 characters in length to a component name on the Mode Display Key and on the Label Key. 1. While holding the COMMANDER OFF button, press MUTING. The word “SET” will appear on the LCD screen. 2. Press the SET key on the LCD screen once to display the word “LABEL” on a Label Key. 3. Press the LABEL key. The word “LABEL” will appear at the top of the screen. 4. Press the COMPO key to change the name of a component. 5. Press the Component Select button or the Label Key of which the component name display you would like to rename. 6. Press the Mode Display Key on which the component name is displayed pressed for more than 2 seconds. 7. The LCD-based keypad will now show letters instead of numbers. Each press of a square will rotate the currently highlighted label character through the square’s assigned letters. The lower left and right squares, marked “SYMBOL 1” and “SYMBOL 2” respectively, will cycle through special symbols. Use the G/g cursor keys to select the character to edit. 8. Press the RETURN key on the LCD screen to decide the component name. 9. When finished, press the COMMANDER OFF button to save your changes. TIP: You can customize Label Keys wherever they are in use –– component names, device functions, System Control macros and Timers. See the Operating Instructions for more information. A La pantalla del reloj muestra la hora actual. 9 El botón EXIT se utiliza para salir de los menús. B La pantalla LCD con teclas sensibles al tacto contiene las teclas que permiten operar cada componente. Estas teclas cambian según el componente seleccionado. 0 El botón MENU le permite ingresar a los menús del componente. C La tecla de modo de visualización muestra el modo actual del control remoto y se puede presionar para cambiar las funciones de las teclas de etiquetas en pantalla. qa Los botones OK y Cursor le permiten examinar los menús y realizar las selecciones. qs Los botones SYSTEM CONTROL le permiten ejecutar macros de hasta 32 operaciones consecutivas de teclas. El botón MORE recorre cíclicamente otras macros mediante las teclas de etiquetas en pantalla. D Los nombres de las teclas de etiquetas pueden ser de hasta 8 caracteres. Puede desplazarse a través de los diferentes conjuntos de etiquetas presionando la tecla de modo de visualización o los botones OTHER, MORE o TIMER. 1 Los botones de selección de componentes eligen directamente los componentes más utilizados: TV, STB (receptor de satélite digital), VCR, DVD, reproductor de CD y amplificador. El botón OTHER recorre cíclicamente otros componentes secundarios mediante las teclas de etiquetas en pantalla. TV STB VCR DVD CD SYSTEM CONTROL 1 2 3 AMP TIMER OTHER LIGHT COMMANDER OFF MORE VOLUME CHANNEL MUTING RECALL OK MENU EXIT 2 El botón TIMER le permite activar o desactivar el temporizador de programas individuales. 3 El botón LIGHT se utiliza para encender o apagar la luz de fondo de la pantalla LCD. COMMANDER OFF MUTING SET 3. Presione la tecla PRESET. Aparecerá “PRESET” en la parte superior de la pantalla. 4. Seleccione el componente que desea configurar presionando el botón de selección o la tecla de etiqueta correspondiente. Cuando haya seleccionado un componente, la pantalla LCD mostrará el número de código actualmente asignado. 5. Con el teclado numérico de la pantalla LCD, ingrese el número de código del componente seguido de ENTER. Para borrar una entrada incorrecta, presione CLEAR. Por ejemplo, para configurar un televisor Philips presione 8, 0, 5, 6 y ENTER. Después de presionar ENTER, aparecerá en la pantalla LCD el código de cuatro dígitos y “OK” y se escuchará un pitido. 8 0 5 6 Para obtener más información, consulte la página 6 del Manual de instrucciones. ENTER 6. Para ajustar otro código, repita los pasos 4 y 5. 7. Para terminar, presione COMMANDER OFF. 1. Presione el botón de selección de componentes o la tecla de etiqueta que corresponda al componente que ajustó. Para visualizar la tecla de etiqueta correcta, presione el botón OTHER para desplazarse a través de todas las opciones. 2. Encienda el componente con el interruptor de encendido. 3. Apunte el control remoto hacia el componente y presione la tecla POWER en la pantalla LCD. El componente debe apagarse. 4. Si completó el procedimiento satisfactoriamente, verifique que las demás funciones del componente puedan utilizarse desde el control remoto. De lo contrario, o si el aparato no se apaga, consulte la guía “Números de código del componente” para probar con otros códigos. El modelo RM-AV3000 está diseñado para operar hasta 18 componentes, pero en la práctica las posibilidades son menores. Probablemente le resulte más conveniente reorganizar los ajustes de fábrica de los componentes, reduciendo así la necesidad de pasar por las teclas de etiquetas. EN EL EJEMPLO SIGUIENTE COPIAREMOS LOS AJUSTES DE LA TECLA DVD A LA TECLA VCR. 1. Manteniendo presionada la tecla COMMANDER OFF, presione MUTING. Aparecerá “SET” en la pantalla LCD. 2. Presione la tecla SET en la pantalla LCD una vez para que aparezca COPY en la tecla de etiqueta. 3. Presione la tecla COPY. Aparecerá “COPY” en la tecla de modo de visualización en la parte superior de la pantalla LCD. 4. Presione el botón de selección de componente o la tecla de etiqueta que desea transferir. El SI EL COMPONENTE NO FIGURA EN LA LISTA. Aunque la marca del componente no figure en la guía “Números de código del componente”, aún podrá localizar un preajuste apropiado. 1. Manteniendo presionada la tecla COMMANDER OFF, presione MUTING. Aparecerá “SET” en la pantalla LCD. 2. Presione la tecla PRESET. Aparecerá “PRESET” en la parte superior de la pantalla. 3. Seleccione el componente que desea configurar presionando el botón o la tecla de etiqueta apropiada. 4. Presione los botones CHANNEL +/– para realizar una búsqueda de los números de código incorporados para la categoría del componente. 5. Para cada número de código, apunte el control remoto al componente y presione la tecla POWER en la pantalla LCD. Si el componente se enciende o se apaga, prosiga con el paso 6. De lo contrario, repita los pasos 4 y 5. 6. Presione la tecla ENTER en la pantalla LCD. Escuchará un pitido y aparecerá “OK” en la pantalla. 7. Para finalizar, presione COMMANDER OFF. Si no puede operar el componente con ninguno de los códigos incorporados, consulte la sección Aprendizaje de nuevos comandos infrarrojos. Para obtener más información, consulte las páginas 12 a 17 del Manual de instrucciones. DVD to VCR componente seleccionado aparecerá en la tecla de modo de visualización en la parte superior de la pantalla. 5. Mientras presiona la tecla de modo de visualización (en este caso, “DVD”), presione el botón de selección de componentes o la tecla de etiqueta donde desea copiar el componente. Aparecerá “COPY” en la pantalla y los componentes parpadearán en las teclas de etiqueta (“DVD -> -> VCR” en este caso). 6. Presione el botón COMMANDER OFF. Para obtener más información, consulte las páginas 48 y 49 del Manual de instrucciones Personalización de los componentes en la tecla de modo de visualización y la tecla de etiqueta. Después de mover los componentes, es posible que los nombres asignados ya no coincidan. Puede asignar a un componente cualquier etiqueta de hasta 8 caracteres en la tecla de modo de visualización y en la tecla de etiqueta. 1. Manteniendo presionada la tecla COMMANDER OFF, presione MUTING. Aparecerá “SET” en la pantalla LCD. 2. Presione la tecla SET en la pantalla LCD una vez para que aparezca “LABEL” en la tecla de etiqueta. 3. Presione la tecla LABEL. Aparecerá “LABEL” en la parte superior de la pantalla. 4. Presione la tecla COMPO para cambiar el nombre de un componente. 5. Presione el botón de selección de componentes o la tecla de etiqueta en la que desea cambiar el nombre del componente. 6. Mantenga presionada la tecla de modo de visualización donde se muestra el nombre del componente durante más de 2 segundos. 7. En la pantalla LCD se mostrarán letras en lugar de números. Cada vez que presione un cuadrado el carácter de la etiqueta actualmente seleccionado rotará por todas las letras asignadas al cuadrado. Los cuadrados del extremo inferior izquierdo y derecho, marcados como “SYMBOL 1” y “SYMBOL 2” respectivamente, se desplazarán cíclicamente a través de símbolos especiales. Utilice las teclas de cursor G/g para seleccionar el caracter que desea editar. 8. Presione la tecla RETURN en la pantalla LCD para determinar el nombre del componente. 9. Cuando haya terminado, presione COMMANDER OFF para guardar los cambios. SUGERENCIA: Puede personalizar teclas de etiquetas allí donde se estén usando: nombres de componentes, funciones de dispositivos, macros de control del sistema y temporizadores. Para obtener más información, consulte el Manual de instrucciones. Programación de una macro para operaciones de una sola tecla. Aprendizaje de nuevos comandos infrarrojos. The RM-AV3000 allows you to program a sequence of functions that execute with one press of a button. So, you could have your entire system power on or off just by pushing “System Control 1.” Your Remote Commander can hold 15 System Control macros and 18 Component Select macros, each containing up to 32 steps. Suppose one or more of your components is not listed in the “Component Code Numbers” guide and you can’t find a code using the “If your component is not listed” procedure described elsewhere in this guide. Don’t worry! The RM-AV3000 is “learning” capable, meaning that you can teach it infrared commands from your component’s existing remotes. COLOCACIÓN DE LAS PILAS. El modelo RM-AV3000 le permite programar una secuencia de funciones que se ejecutan con solo pulsar una tecla. De este modo, puede hacer que todo el sistema se encienda o se apague presionando solamente “System Control 1.” El control remoto puede guardar 15 macros de control del sistema y 18 macros de selección de componente, cada una con hasta 32 pasos. Si alguno de sus componentes no figura en la guía “Números de código de componentes” y no puede encontrar un código con el procedimiento “Si el componente no figura en la lista” descrito anteriormente en esta guía, no se preocupe. El modelo RM-AV3000 es capaz de “aprender”, lo que significa que le puede enseñar comandos infrarrojos desde los controles remotos existentes del componente. IN THE FOLLOWING EXAMPLE, WE’LL CREATE A MACRO THAT POWERS ON A TYPICAL SYSTEM. You can also use this procedure to teach special commands to the RM-AV3000 that might not be in Sony’s library of pre-programmed commands. Although the Commander is not capable of learning from absolutely every remote control, Sony’s special learning technology will work with the vast majority of components. TV STB VCR DVD CD SYSTEM CONTROL OTHER AMP TIMER LIGHT If a System Control or Component Select button already has a macro or learned signal on it, the RM-AV3000 will flash “NG” when you attempt to program over it. Clear the button before programming a new macro by holding DEL and the button you want to reset (for more information, turn to page 51 of the Operating Instructions). 2 3 COMMANDER OFF CHANNEL OK EXIT STB VCR DVD CD AMP OTHER MORE VOLUME MUTING RECALL 5. When you’re finished, press the SET key on the LCD Display. If your macro does not operate reliably, try rearranging commands, or adjusting the amount of delay that the RM-AV3000 inserts between each command. See pages 34 and 40 of the Operating Instructions for more information. TV 2 While holding the COMMANDER OFF button, press MUTING. The word “SET” appears on the LCD screen. 3 Press the LEARN key. The word “LEARN” appears at the top of the screen. SYSTEM CONTROL 1 2 3 TIMER LIGHT COMMANDER OFF MORE VOLUME EXIT MUTING 4 Select the component you would like to teach commands to by pressing the appropriate Component Select button or Label Key. AMP RECALL 5 Find the button on which you would like to place the new command. If you are adding a command to a Label Key, press the Mode Display key repeatedly to cycle through all available choices (in this example it will show “VCR”). 2. Seleccione el día de la semana. Utilice las teclas de cursor F/f para escoger el día, luego utilice la tecla derecha para ingresar su selección. 3. Ajuste la hora con AM/PM. Utilice las teclas de cursor F/f para seleccionar la hora, luego emplee la tecla de cursor g para ingresar su selección. Para retroceder y realizar un cambio, presione la tecla de cursor g. 4. Ajuste los minutos. Utilice las teclas de cursor F/f seleccionar los minutos, luego emplee la tecla de cursor g para ingresar su selección. Para retroceder, presione la tecla de cursor G. 5. Cuando haya terminado, presione la tecla SET en la pantalla LCD. 6 The word “LEARN” will start flashing on the RM-AV3000. Now, press and hold the button on the other remote control until you hear the Remote Commander beep. “LEARN” will stop flashing. IMPORTANTE DVD CD 1 2 3 OTHER AMP TIMER LIGHT COMMANDER OFF MORE VOLUME CHANNEL EXIT MUTING RECALL TV 2 Manteniendo presionada la tecla COMMANDER OFF, presione MUTING. Aparece “SET” en la pantalla LCD. VCR 3 Presione la tecla LEARN. Aparece “LEARN” en la parte superior de la pantalla. AMP 4 Seleccione el componente al que desea enseñar comandos presionando el botón de selección de componente o la tecla de etiqueta apropiada. TV STB VCR DVD CD SYSTEM CONTROL 1 2 3 AMP TIMER OTHER LIGHT COMMANDER OFF MORE VOLUME CHANNEL MUTING RECALL OK MENU EXIT 5 Busque el botón en el cual desea colocar el nuevo comando. Si agrega un comando a una tecla de etiqueta, presione la tecla de modo de visualización varias veces para desplazarse a través de todas las opciones disponibles (en este caso, “VCR”). 6 “LEARN” comenzará a parpadear en el RMAV3000. Ahora, mantenga presionado el botón del otro control remoto hasta que escuche un pitido. “LEARN” dejará de parpadear. TV STB 2 VCR TV 3 EXIT 3 7 Repita los pasos 5 y 6 para enseñar otras funciones. DVD DVD CD LIGHT AMP OTHER COMMANDER OFF CHANNEL TIMER OTHER COMMANDER OFF VOLUME MORE LIGHT CHANNEL AMP RECALL TIMER MUTING CD VOLUME MORE 1 Manteniendo presionada la tecla COMMANDER OFF, presione MUTING. Aparecerá “SET” en la pantalla LCD. 2 Presione la tecla SYSTEM. Aparecerá “SYSTEM” en la parte superior de la pantalla. 3 Presione el botón de control del sistema o de selección de componente al cual desea agregar la macro. El botón seleccionado se mostrará en la parte superior de la pantalla. 4 Seleccione el componente que contiene el primer comando que desea agregar a la macro (en este ejemplo, “TV”). 5 Presione el primer comando que desea grabar (en este ejemplo, “POWER”). Puede acceder a otras teclas de etiquetas en cada aparato en particular presionando la tecla de modo de visualización en la parte superior de la pantalla. 6 Repita los pasos 4 (si cambia de componente) y 5 para cada comando adicional que desee grabar, hasta un máximo de 32. 7 Cuando haya terminado, presione el botón COMMANDER OFF. 1 Coloque el RM-AV3000 y el control remoto del componente de manera que se encuentren frente a frente, a una distancia aproximada de entre 5 y 10 cm. Si tiene problemas de aprendizaje, modifique la distancia entre los dos controles. OK VCR RECALL Para obtener más información, consulte las páginas 7 a 11 del Manual de instrucciones. También encontrará información sobre cómo cambiar la pantalla LCD y los intervalos de la luz de fondo. Hay más botones de selección de componentes y de control del sistema de los que puede ver inicialmente. Cada vez que en esta guía se indique que debe seleccionar una de dichas funciones, recuerde que puede acceder a otros botones con las teclas de etiquetas de la pantalla LCD. Si presiona los botones OTHER o MORE se desplazará cíclicamente a través de un número mayor de posiciones de selección de componentes o de control del sistema. MENU Si la macro no funciona satisfactoriamente, trate de reajustar los comandos o de ajustar el intervalo que inserta el modelo RM-AV3000 entre cada comando. Para obtener más información, consulte las páginas 34 y 40 del Manual de instrucciones. SYSTEM CONTROL 2 SYSTEM CONTROL MUTING 8 When finished, press COMMANDER OFF to save your new functions. For more information, please turn to pages 19 through 28 of the Operating Instructions. VCR SYSTEM CONTROL EN EL EJEMPLO SIGUIENTE PROGRAMAREMOS EL COMANDO PLAY DEL CONTROL REMOTO DE UNA VIDEOGRABADORA EN EL MODELO RM-AV3000. MENU 7 Repeat steps 5 and 6 to teach other functions. STB EXIT For more information, please turn to pages 31 through 41 of the Operating Instructions. STB OK VCR TIP: You can select a custom label when learning! See the Operating Instructions for more information. TV También puede usar este procedimiento para enseñarle al RM-AV3000 comandos especiales que podrían no estar incluidos en la biblioteca de comandos preprogramados de Sony. Aunque no es posible que el control remoto aprenda desde todos los controles, la tecnología de aprendizaje especial de Sony funcionará con la gran mayoría de los componentes. 1 1 TV OK TV EJEMPLO: CÓMO CREAR UNA MACRO QUE ENCIENDA UN SISTEMA ESTÁNDAR. Si un botón de control del sistema o de selección de componente ya posee una macro o una señal aprendida, en el modelo RM-AV3000 parpadeará “NG” cuando intente programarlo. Antes de programar una macro nueva, borre el botón manteniendo presionado DEL y el botón que desea reajustar (para obtener más información, consulte la página 51 del Manual de instrucciones). CHANNEL OK MENU 1. Después de colocar las pilas, aparecerá “CLOCK” (reloj) en la pantalla LCD. Debe ajustar la hora. Presione DS TIME para seleccionar “Daylight Saving Time” (horario de verano) durante los meses de verano en áreas donde se emplea el horario de ahorro de energía. En caso contrario, presione STD TIME para seleccionar “Standard Time” (horario estándar). La palabra SET parpadeará en la pantalla LCD. VCR MENU 1 While holding the COMMANDER OFF button, press MUTING. The word “SET” will appear on the LCD screen. 2 Press the SYSTEM key. The word “SYSTEM” will appear at the top of the screen. 3 Press the System Control or Component Select button to which you would like to add the macro. The selected button will be shown at the top of the display. 4 Select the component that contains the first command you would like to add to your macro (in this example, “TV”). 5 Press the first command you would like to record (in this example, “POWER”). You can access additional Label Keys under each device by pressing the Mode Display Key at the top of the screen. 6 Repeat steps 4 (if changing components) and 5 for each additional command you would like to record, up to a maximum of 32. 7 When finished, press the COMMANDER OFF button. 1 Place the RM-AV3000 and your existing remote control head-to-head, about 2 to 4 inches apart. If you experience learning difficulties, try varying the distance between the two remotes. El modelo RM-AV3000 utiliza cuatro pilas AA. Abra el compartimiento para pilas y haga coincidir los terminales + y – con las marcas del interior. Coloque la tapa. Cuando cambie las pilas, el control remoto conservará la programación. AJUSTE DE HORA Y FECHA. IN THE FOLLOWING EXAMPLE, WE WILL PROGRAM THE PLAY COMMAND OF A VCR REMOTE TO THE RM-AV3000. TV 1 MENU There are more Component Select and System Control buttons than you can initially see. Whenever this guide asks you to select one of those functions, remember that you can access additional buttons on the LCDbased Label Keys. Pressing the OTHER or MORE button will cycle through an even greater number of Component Select or System Control positions. 1. While holding the COMMANDER OFF button, press MUTING. The word “SET” will appear on the LCD screen. 2. Press the SET key on the LCD screen once to display the word COPY on a Label Key. 3. Press the COPY key. The word “COPY” will now appear on the Mode Display Key at the top of the LCD screen. 4. Press the Component Select button or Label Key that you would like to move. The selected VERIFICACIÓN DEL FUNCIONAMIENTO DEL NÚMERO DE CÓDIGO. Colocación de las pilas, Ajuste de hora y fecha. 4. Set the minute. Use the F/f cursor keys to choose the minute, then use the g cursor key to select your choice. To go back, press the G cursor key. IMPORTANT REMINDER IN THE FOLLOWING EXAMPLE, WE WILL COPY THE SETTINGS OF THE DVD BUTTON TO THE VCR BUTTON. El modelo RM-AV3000 puede controlar hasta 18 componentes. Aunque está configurado de fábrica para equipos Sony, también está preprogramado para la mayoría de las demás marcas de componentes. Con el RM-AV3000 se incluye una guía independiente de “Números de código de componentes” que enumera todas las marcas compatibles. Felicitaciones por la compra del Control remoto integrado RM-AV3000 de Sony. Transferencia de los botones de selección de componentes y de las teclas de etiquetas. Learning New Infrared Commands. 3. Set the hour along with AM/PM. Use the F/f cursor keys to choose the hour, then use the g cursor key to enter your choice. To go back and make a correction, press the G cursor key. For more information, please turn to pages 7 through 11 of the Operating Instructions. You can also find out how to change the LCD screen and backlight timeouts. 1. Press the Component Select button or Label Key for the component you’ve just set up. To display the correct Label Key you may need to press the OTHER button to cycle through all choices. 2. Turn on the power to your component by pressing the power switch on the component itself. 3. Aim the Commander at your component and press the POWER key on the LCD screen. Your component should turn off. 4. If this is successful, check that the commander operates your component’s other functions. If this is not the case, or if your device does not turn off, check the “Component Code Numbers” guide for alternative codes to test. Ajuste del modelo RM-AV3000 para sus componentes. Programming a Macro for One-Touch System Operation. SETTING THE TIME AND DAY. 1. After you install the batteries, “CLOCK” will appear on the LCD screen. You should now set the time. Press DS TIME for “Daylight Saving Time” during summer months in areas that use daylight savings. Otherwise, press STD TIME for “Standard Time.” The word SET will flash on the LCD screen. TESTING THE CODE NUMBER YOU’VE SET. RM-AV3000 Guía de referencia rápida VCR Para obtener más información, consulte las páginas 31 a 41 del Manual de instrucciones. SUGERENCIA: Puede seleccionar una etiqueta personalizada durante el aprendizaje. Para más información consulte el manual de instrucciones. 8 Cuando haya terminado, presione COMMANDER OFF para guardar las nuevas funciones. Para obtener más información, consulte las páginas 19 a 28 del Manual de instrucciones.