Transcript
****Owners Manual Update**** As a Valued Customer of Master Spas, Inc, this Owners Manual Insert is being issued to keep you informed of the changes that have been made since the original Owners Manual was printed. At the time of print, the manual was accurate in its information. Master Spas reserves the right to change or improve its product without prior notice. We hope that this insert will serve as a useful and informative document that you can refer to for the entire time you own your spa. Should you have any questions concerning the operation of your spa or the information provided in your owners manual, feel free to contact your dealer at your earliest convenience. Page 39 Original Topic Diagnostic Messages PHL, PHH, SAL, SAH Changed to Removed from Manual. Reason Feature no longer available. 32 Icon Legend: Fiber Optic Light Icon-Spins when the wheel is on; stands when wheel is off. Press the "Light" button to turn the light on and off. If left on, the light automatically turns off after 4 hours. Our new L.E.D. controller operates as follows: Press the "Light" button to turn the light on and off. If you wish to change the "function" of the lights, turn the lights off, then on within 5 seconds. If you wish to leave the lights in the same "function" setting for the next use, turn the lights off and do not turn back on for at least 5 seconds. 36 "Light" Description of operation Description below "Light" Removed and replaced with the following reason. Our new L.E.D. controller operates as follows: Press the "Light" button to turn the light on and off. If you wish to change the "function" of the lights, turn the lights off, then on within 5 seconds. If you wish to leave the lights in the same "function" setting for the next use, turn the lights off and do not turn back on for at least 5 seconds. 41,46 "Light" Description of operation Not a change; simply a more detailed description. Our new L.E.D. controller operates as follows: Press the "Light" button to turn the light on and off. If you wish to change the "function" of the lights, turn the lights off, then on within 5 seconds. If you wish to leave the lights in the same "function" setting for the next use, turn the lights off and do not turn back on for at least 5 seconds.
