1
Download Operating Instructions - Lauda
Transcript
Integral T Process Thermostats 7.5.1 Setpoint selection (Level 0) or − Press keys until SET (Setpoint) appears. − Enter, display is flashing. or − Enter setpoint with both keys ( Section 7.3.1). − Display is flashing 4 s Æ new value is entered automatically, or − value entered immediately with key. − For safety reasons the setpoint can only be set up to 2°C above the upper limit of the operating temperature range of the particular equipment type. − Appears when analogue setpoint input is activated. 7.5.2 External actual temperature display − switches line 2 of the display from setpoint SET to the external actual temperature TE, − or outflow temperature Ti if external control is activated Ti. 30 Starting up YAWE 0026 / 23.08.2006
