Download Fire Sense 60460 Instructions / Assembly

Model #:60460
(866) 985-7877
2 - Wall Mounting Bracket
Ceiling
Screws
Drill 5/1 6"
Pilot hole
1 5/8" depth
Floor
Floor
Heater MUST always face the floor
Ceiling
Correct
Route power cord below and away from head unit as show in box 5.
Ceiling
Wrong
Ceiling
Correct
Wrong
Creates a
generous zone
of comfort!
Min head unit
clearance from
combustibles
10" wall and
12" ceiling
45-55 degree
angle of
operation
84"
1500W
Quartz Halogen
Lamp
10ft
Uses standard
110V household
current
10.8ft
19ft
SAFE for INDOOR
Applications too!
Grounded outlet
Grounding pin
60460
End
connectors
Clip ends must be
aligned as close to
end connectors of lamp
tube when installed. Do NOT
allow to touch tube lamp itself.
2 sheet metal
Screws
6 small
bolts
Connecting wire
lead
Metal friction clips
Push apart sligtly
to remove
lamp tube end
connectors
wire lead
terminal connector
Front Vent Panel
Remove & Replace ENTIRE Lamp assembly
including lamp, end connectors & wire lead
NOTE: do NOT allow any metal to contact actual lamp tube
Fire Sense
R
R
and Well Traveled Living R are registered trademarks of Well Traveled Imports,
. All
lncassembly instruction presentations
R
Traveled Imports, lnc.
and protected
are
by U.S.
copyrights and trademarks. All rights reserved.
are the property
of Well