Download Fire Sense 60460 Instructions / Assembly
Transcript
Model #:60460 (866) 985-7877 2 - Wall Mounting Bracket Ceiling Screws Drill 5/1 6" Pilot hole 1 5/8" depth Floor Floor Heater MUST always face the floor Ceiling Correct Route power cord below and away from head unit as show in box 5. Ceiling Wrong Ceiling Correct Wrong Creates a generous zone of comfort! Min head unit clearance from combustibles 10" wall and 12" ceiling 45-55 degree angle of operation 84" 1500W Quartz Halogen Lamp 10ft Uses standard 110V household current 10.8ft 19ft SAFE for INDOOR Applications too! Grounded outlet Grounding pin 60460 End connectors Clip ends must be aligned as close to end connectors of lamp tube when installed. Do NOT allow to touch tube lamp itself. 2 sheet metal Screws 6 small bolts Connecting wire lead Metal friction clips Push apart sligtly to remove lamp tube end connectors wire lead terminal connector Front Vent Panel Remove & Replace ENTIRE Lamp assembly including lamp, end connectors & wire lead NOTE: do NOT allow any metal to contact actual lamp tube Fire Sense R R and Well Traveled Living R are registered trademarks of Well Traveled Imports, . All lncassembly instruction presentations R Traveled Imports, lnc. and protected are by U.S. copyrights and trademarks. All rights reserved. are the property of Well