Transcript
Moore Club Chair Assembly Instructions STEP 1 Remove Legs and Hardware from the bottom of the Club Chair. STEP 2 Place the 2 Curved Front Legs into the Front Leg Positions. The Front Legs are interchangeable. STEP 3 Place the 2 Angled Back Legs into the Back Leg Positions. The Back Legs are interchangeable. STEP 4 Tighten each bolt through the washer with the wrench clockwise. HARDWARE LIST: STEP 5 STEP 6 Insert the bolt through the washer into each leg and tighten with the enclosed wrench. Remove the WHITE protection strip from the Bottom edge of the chair and place the BLACK cover over the bottom of the Club Chair to complete. 1 L-SHAPE WRENCH*1 2 BOLT*8 3 WASHER*8 4 FRONT LEG*2 5 BACK LEG*2 6 COVER-UP FABRIC*1 7 INSTRUCTION*1