Download ThermaCELL LED AP Instructions / Assembly

All - Purpose
Swivel Light
Clips to ThermaCELL Appliance, hat or belt
All-Purpose Swivel Light
Package Contents:
• All-Purpose Swivel Light
• Clip Attachment
• (2) CR-2032 Lithium Batteries
Attaching to ThermaCELL Appliance:
1) Make sure Appliance is OFF.
2) Insert base of All-Purpose Swivel Light above (or on side of)
your Appliance's grill.*
*ATTENTION: For Appliance models A and B (see illustrations below),
attach All-Purpose Swivel Light to top of grill. For Appliance model C,
attach to side of grill.
Perfect for camping,
hunting, fishing or
any outdoor
activity.
Provides
White OR
Green
Light
Attaching to Other Objects:
1) Slide base of All-Purpose Swivel Light into
open slot on top of Clip Attachment. You will
hear a click when securely attached.
2) Secure Clip Attachment to your hat, belt,
or other object.
All-Purpose Swivel Light Adjustment
If head on ThermaCELL All-Purpose Swivel Light becomes loose (does not
stay in place), please turn hinge screw for desired tightness. For location of
hinge screw, see light illustration in "Package Contents”.
All-Purpose Swivel Light Operation:
Slide power switch located on side of light UP for white light (4 LEDs) and
DOWN for green light (4 LEDs). This light operates in white OR green light;
white and green lights cannot be illuminated at same time.
Battery Installation/Replacement:
1) Locate battery cover on bottom of light.
2) Remove clear plastic insert from battery
compartment (only for first time use).
3) Press firmly and slide battery cover open.
4) Place one battery on each side with open
battery compartment facing you. Left side:
positive (+) up; Right side: negative (-) up.
5) Replace battery cover by sliding until secure.
ThermaCELL Limited Warranty: The ThermaCELL All-Purpose Swivel Light
is guaranteed to last one year from date of purchase. ThermaCELL will repair
or replace, at our option, any ThermaCELL product that does not perform to
your satisfaction. This is a limited warranty and excludes abuse (will be
determined by ThermaCELL) and batteries. Please return defective product,
and receipt of purchase to:
The Schawbel Corporation
26 Crosby Drive
Bedford, MA 01730
Instructions inside
Manufactured in China
LED-AP
The Schawbel Corporation
26 Crosby Drive, Bedford, MA 01730, USA
www.thermacell.com
Phone: 1-8-NO-SKEETER
Email: [email protected]
WARNING: PLEASE KEEP AWAY FROM CHILDREN. This product is not a toy
and contains small parts. Avoid direct eye exposure. Lithium batteries must
be disposed of in accordance with local laws and regulations.
• Swivel feature shines
light exactly where you
need it
• Beam distance over 15 ft.
• 8 LEDs provide white OR
green light
• Battery life up to 30 hours
• Lightweight (1.11 oz)
Contents include: All-Purpose Swivel Light, Clip Attachment and two CR-2032 Lithium Batteries.
Provides White OR
Green Light
The ThermaCELL All-Purpose Swivel Light easily attaches to
all ThermaCELL Appliances, as well as hats, belts and most
outdoor gear.
All-Purpose Swivel Light
Batch code
000000
2
Date: 09.12.11
Project: Revised LED-AP All-Purpose
Swivel Light (changed CAP light)
NON
PRINTING
357
DIE
Scale: 1:1 mm
Client: Schawbel/ThermaCELL
No: THC10-149
All - Purpose
Swivel Light
Clips to ThermaCELL Appliance, hat or belt
All-Purpose Swivel Light
Package Contents:
• All-Purpose Swivel Light
• Clip Attachment
• (2) CR-2032 Lithium Batteries
Attaching to ThermaCELL Appliance:
1) Make sure Appliance is OFF.
2) Insert base of All-Purpose Swivel Light above (or on side of)
your Appliance's grill.*
*ATTENTION: For Appliance models A and B (see illustrations below),
attach All-Purpose Swivel Light to top of grill. For Appliance model C,
attach to side of grill.
Perfect for camping,
hunting, fishing or
any outdoor
activity.
Provides
White OR
Green
Light
Attaching to Other Objects:
1) Slide base of All-Purpose Swivel Light into
open slot on top of Clip Attachment. You will
hear a click when securely attached.
2) Secure Clip Attachment to your hat, belt,
or other object.
All-Purpose Swivel Light Adjustment
If head on ThermaCELL All-Purpose Swivel Light becomes loose (does not
stay in place), please turn hinge screw for desired tightness. For location of
hinge screw, see light illustration in "Package Contents”.
All-Purpose Swivel Light Operation:
Slide power switch located on side of light UP for white light (4 LEDs) and
DOWN for green light (4 LEDs). This light operates in white OR green light;
white and green lights cannot be illuminated at same time.
Battery Installation/Replacement:
1) Locate battery cover on bottom of light.
2) Remove clear plastic insert from battery
compartment (only for first time use).
3) Press firmly and slide battery cover open.
4) Place one battery on each side with open
battery compartment facing you. Left side:
positive (+) up; Right side: negative (-) up.
5) Replace battery cover by sliding until secure.
ThermaCELL Limited Warranty: The ThermaCELL All-Purpose Swivel Light
is guaranteed to last one year from date of purchase. ThermaCELL will repair
or replace, at our option, any ThermaCELL product that does not perform to
your satisfaction. This is a limited warranty and excludes abuse (will be
determined by ThermaCELL) and batteries. Please return defective product,
and receipt of purchase to:
The Schawbel Corporation
26 Crosby Drive
Bedford, MA 01730
Instructions inside
Manufactured in China
LED-AP
The Schawbel Corporation
26 Crosby Drive, Bedford, MA 01730, USA
www.thermacell.com
Phone: 1-8-NO-SKEETER
Email: [email protected]
WARNING: PLEASE KEEP AWAY FROM CHILDREN. This product is not a toy
and contains small parts. Avoid direct eye exposure. Lithium batteries must
be disposed of in accordance with local laws and regulations.
• Swivel feature shines
light exactly where you
need it
• Beam distance over 15 ft.
• 8 LEDs provide white OR
green light
• Battery life up to 30 hours
• Lightweight (1.11 oz)
Contents include: All-Purpose Swivel Light, Clip Attachment and two CR-2032 Lithium Batteries.
Provides White OR
Green Light
The ThermaCELL All-Purpose Swivel Light easily attaches to
all ThermaCELL Appliances, as well as hats, belts and most
outdoor gear.
All-Purpose Swivel Light
Batch code
000000
2
Date: 09.12.11
Project: Revised LED-AP All-Purpose
Swivel Light (changed CAP light)
NON
PRINTING
357
DIE
Scale: 1:1 mm
Client: Schawbel/ThermaCELL
No: THC10-149