Download Gronomics VGS 33-23 Instructions / Assembly

Vertical Garden Stand
Assembly Instruction
1
VGS 33-23
Parts Identification
1
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
Torx® T15
NOTE: The vertical garden stand can be equipped
with a self watering system, contact Gronomics at
1-855-299-6727.
2
Parts List
DESCRIPTION
ITEM
QTY.
PART #
1
1
VGS 33-23
Vertical Garden Stand
2
4
CS8-112ZY
Screw, #8 x 1-1/2”
Packaged & Inspected by:
Date:
Continued
www.gronomics.com
East Bethel, MN USA
763-753-7374
2
Installing The Vertical Garden Bed
Lower the vertical garden bed into the garden stand
(Item 1).
Vertical Garden Bed
Fasten the vertical garden bed to the garden stand with
four 8 x 1-1/2” screws (Item 2).
Install Screws
Into The Predrilled holes
2
2
3
Install Screws
Into The Predrilled holes
2
1
Soil Mix
NOTE: Before adding the soil mix, verify that the vertical
garden stand is secure and stable. Verify that all back rails
and shelf rails are completely installed.
Slowly place the soil mix into the top of the vertical garden.
Add soil mix until it is approximately one inch below the top
back and shelf rails.
www.gronomics.com
East Bethel, MN USA
763-753-7374