Download Home Decorators Collection 7474700410 Instructions / Assembly

 HOME
DECORATORS
COLLECTION
INVE74747
SK18156 ELIXIR TALL STORAGE CABINET 50"HX15.25"WX15.25"D
ASSEMBLY INSTRUCTIONS
Made In China
Thank you for purchasing this quality product. Be sure to check all
packing material carefully for small parts, which may have came
loose inside the carton during shipment. Count all parts and material
present. If any parts are missing or damaged, please contact our
Customer Service Department for efficient and speedy service.
Please indicate the model number and code letter of part(S) needed.
IMPORTANT NOTE:Follow instructions listed below in proper
sequence as numbered to assure fast,easy and correct assembly.
PARTS LIST
Foot knob - 4PCS Metal screw - 2PCS
Y
O >
D
Top cap - 1PC Shelf - 2PCS
> © ©
SL
D
IN
7/7
Rectangle metal
Main cabinet - 1PC Shelf holder - 8PCS plate - 2PCS
——2/10—
plastic anchor - 1PC
1-1/2" metal screw -1PC| Plastic band - 1PC
—3/10——
FIG 1
\
/
/, /
/ о = = =
/ \
INF \
\
A —[| T
/
/
\
27%
A
eo Screw 4 foot knobs (2) onto the bottom of main cabinet (1) and adjust level.
—4/10——
FIG 2
—
e Attach shelf holder (6) onto main cabinet (1).
e Each shelf needs 4pcs shelf holders
——5/10—
FIG 3
A
NN
X À 7 Y
E Y 7/6
Y о / ® < a a /
ZA
XX
e Tilt and place the shelf (5) on the shelf holder.
——6/10—
A
\
\
МЕ
№
e Slide top cap (4) onto the top of main cabinet.
——1/10—
FIG 5
I ce
el.
A
A
NL
e Tighten one of the rectangle metal plates (7) totop cap with metal screw (3)
on the back of the cabinet using a Philips screwdriver.
——8/10—
FIG 6
I | EI 4
Y
в <
>
©
[ am €
7
1717
A
e Place the cabinet at desired position by the wall. Mark the insertion point for
the plastic anchor (8) on the wall. Using the proper hardware for your wall
type, drill 1/4" hole.
e Tighten another rectangle metal plate (7) to the plastic anchor (8) by using
the 1-1/2" metal screw (9).
—9/10——
FIG 7
I ce
el.
A
A
NL
- Using the plastic band (10), connect two rectangle metal plates (7).
—10/10——