Download TP-Link Archer C8 Quick Installation Guide
Transcript
Quick Installation Guide AC1750 Wireless Dual Band Gigabit Router Power adapter 7106504809 REV1.0.1 Connecting the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the Archer C8’s Internet port. 4 Turn on the Archer C8. Archer C8 Connect to the computer Internet Power adapter Modem 1 Turn off the modem, and remove the backup battery if it has one. 3 Turn on the modem, and then wait 2 minutes for it to restart. 2 Connect the modem to the Internet port on your Archer C8 with an Ethernet cable. 5 Verify that the hardware connection is correct by checking these LEDs. Power On 2.4/5G On Internet On Note: If the 2.4/5G LED is not on, please verify that the wireless switch on the side panel of the Archer C8 is on. Configuring the Archer C8 with a Web Browser 1. Connecting your computer to the Archer C8 (Wired or Wireless) Wireless Settings WAN Connection Type Region and Time zone Test Your Connection USB Features Use the USB port for media sharing, storage sharing and printer sharing across your local network. You can also setup an FTP server to access your files remotely through the Internet. Summary Auto Detect Dynamic IP PPPoE Static IP L2TP PPTP Wired Note: If you are not sure which WAN Connection Type you have, use Auto Detect or contact your Internet Service Provider (ISP) for assistance. Next Ethernet cable D Click ‘Next’ to continue. Note: You may rename your 2.4GHz/5GHz wireless network name and create your own password. if you do, the wireless connection will disconnect automatically, and you must then sign in with the new names/passwords to regain access to the Internet. Wireless Use the default network name (SSID) and password printed on the product label on the rear panel of the Archer C8 to connect wirelessly. Wireless Settings WAN Connection Type Region and Time zone 2.4GHz: 2. Configuring the Archer C8 with a web browser A Enter ‘http://tplinklogin.net’ in the address bar. Use ‘admin’ for both user name and password, and then click on ‘Login’. ON Password: 12345670 ON OFF Network Name(SSID): TP-LINK_7AFF_5G Password: 12345670 Next http://tplinklogin.net E Confirm your settings, and then click ‘Save’ to continue or ‘Back’ to change them. Wireless Settings WAN Connection Type B Select your region and time zone, and click ‘Next’ to continue. Test Your Connection Region: United States Time Zone: (GMT-08:00)Pacific Time Internet Connection Type: Dynamic IP Wireless 2.4GHz On Name(SSID): TP-LINK_7AFF Password: 12345670 Wireless 5GHz On Name(SSID): TP-LINK_7AFF_5G Password: 12345670 Wireless Settings Region and Time zone Region: United States Time zone: (GMT-08:00) Pacific Time Save Test Your Connection Summary F Finish the configuration. WAN Connection Type Wireless Settings Test Your Connection Note: The Quick Setup wizard will bypass Step C and go to Step D, if an Internet connection is already established. Web Management page password: A. Restore the Archer C8 to its factory default settings and then use the default User Name ’admin’ and Password ’admin’ to log in. Summary Wireless Network password: Congratulations! A1. The default password is printed on the product label on the rear panel of the Archer C8. A2. If you have changed your wireless password, log in to the Archer C8’s Web Management page, go to ‘Basic’->’Wireless’ to obtain or reset your password. You have completed the Quick Setup process. Click Test Internet Connection below, then click Finish. C Select your Connection Type and if you are unsure what your connection type is, select ‘Auto-Detect’. Click ‘Next’ and follow the instruction to continue. A1. With the Archer C8 in the ‘Power On’ mode, press and hold down the ‘Reset/WPS’ button on the rear panel of the Archer C8 for approximately 8 seconds. A2. Log in to the Web Management page of the Archer C8, and go to ‘Advanced’ -> ‘System tools’->’Factory Defaults’, click ‘Restore’, then wait until the loading progress bar finishes. Q4. What can I do if I forget my password? Region and Time zone Next Q2. What can I do if I cannot access the Internet? Q3. How do I restore the Archer C8 to its factory default settings? Back WAN Connection Type A1. If the computer is set to a static or fixed IP address, change the setting to obtain an IP address automatically. A2. Verify that ‘http://tplinklogin.net’ is correctly entered in the web browser. Alternatively, enter ‘http://192.168.0.1’ in the web browser and press ‘Enter’. A3. Use another web browser and try again. A4. Reboot your Archer C8 and try again. A5. Disable then re-enable the network adapter being used. A1. Check if the Internet is working properly by connecting a computer directly to the modem through Ethernet. If it is not, contact your Internet Service Provider. A2. Open a web browser, enter ‘http://tplinklogin.net’ and try to set up again. A3. Reboot your Archer C8 and try again. A4. For cable modem users, reboot the modem first. If the problem still exists, log in to the Web Management page of the Archer C8, and go to ‘Advanced’ -> ‘Network’ -> ‘MAC Clone’ , click on ‘Clone MAC Address’ then click on ‘Save’. Summary Region and Time zone Copyright © 2014 TP-LINK Technologies Co., Ltd. All rights reserved. Printer Sharing Q1. What can I do if the login window dose not appear? Back Login Local Storage Sharing FAQ (Frequently Asked Questions) Note: If the login window does not appear, please refer to FAQ->Q1. admin Media Sharing Test Your Connection OFF Network Name(SSID): admin Remote Access via FTP Server Summary TP-LINK_7AFF 5GHz: USB Sharing Port Test Internet Connection Back Finish