Download Sony WALKMAN MZ-E35 User's Manual
Transcript
D z 3-861-297-01(1) B P A z G 1 3 = /Operating Instructions 1 3 = PLAY MODE + 1 (• + 1 HOLD = 1 = PLAY MODE + MZ-E35 1 NH-9WM (N) 2 Sony Corporation © 1997 Printed in Japan HOLD (• + 1 2 ◊ ◊ p OPEN 2 PLAY MODE HOLD c 3 EJECT E 2 • • LOCK v • 1 RELEASE v 40 f 1 v • f1 1 • 3 v • fSHUF DIGITAL MEGA BASS DEGITAL MEGA BASS 1 MD WALKMAN 2 ∫ v b v n LoBATT 2 * • 3 6 NH-9WM N C 8 LR6 (SG) 1 16 LR6 (SG) 1 • DISPLAY OPEN • • AVLS F NH-9WM N * 1 OPEN ( • 4 • 1 3( (•+ • P = ) DISPLAY H + ( ( ) ) 1 2 AVLS 3 • VOL v AVLS LIMIT 2 AC AC-E15L DC IN 1.5V • 8 3 VOL AC v p 4 VOL 2 2/REMOTE 1 DC IN 1.5V p AC ı z • English 1 b PLAY MODE 2 f 1 As you read, refer to the illustrations in the Japanese text. 1 3 1 1 • 1 1 1 1 b • 1 AC AC-E15L NH-9WM CPA-8 DCC-E215 *MDR-D55 MDRD77 MDR-E888SP SRS-A41 SRSA91 CKMD4 CKMD10 • • AC b • • AC AC-E15L EIAJ AC Welcome to the world of the MiniDisc! Here are some of the capabilities and features you will discover with the new MiniDisc player. b • • Small body almost the size of a MiniDisc jacket Ideal weight and size; fits in your shirt pocket. • Shock-resistant memory offsets up to 40 seconds of optical read errors. • Low power-consumption design enables long playback with a single "chewing-gum type" rechargeable battery. • HOLD cover on the main unit prevents unintended operation. • Shuttle dial remote control with LCD Keep the main unit in your pocket and operate the MiniDisc player through the shuttle dial on the remote control; The LCD diplays track information, playback mode as well as battery condition. • zMD playing b 2 REMOTE Playing an MD! A • b VOL b AVLS • NORM • * 2/REMOTE Before using the supplied rechargeble battery for the first time, charge it. Other choices are a dry battery and house current (see "Power Sources"). The player automatically switches to play the stereo or monaural sound according to the recorded sound. • 1 • Charge the supplied rechargeble battery NH-9WM with the supplied battery charger. • 2 Open the rechargeable battery compartment lid and insert the charged battery. GaAlAs 790 nm • Press P on the remote control. (Continuous short beeps) Press P again to resume play. Find the beginning of the current track Press = once. Turn the control to = on the remote control. (Three short beeps) Find the beginning of the next track Press + once. Turn the control to ( •+ on the remote control. (Two short beeps) Go backwards Keep pressing =. while playing* Keep the control turned to = on the remote control. Keep pressing +. Go forward while playing* Keep the control turned to ( •+ on the remote control. Remove the MD ? 900 rpm CLV ACIRC 44.1 kHz • DISC b 4 Play the MD. ATRAC No EFM • 2 1 b HOLD • 20 b 20,000 Hz 3 dB • Lo BATT : 5 mW+5 mW 16 Ω b • 1 Push the OPEN button and open the lid. 2 Insert the MD with the label side facing up, and press the lid down to close. 1 Connect the headphones (supplied) to the remote control. 2 Connect the headphones with remote control (supplied) to the 2 (headphones)/REMOTE jack of the player. 3 Press (. (Turn the control to (•+ on the remote control.) The player starts to play the first track. A short beep sounds in the headphones. 4 Press the VOL +/– buttons to adjust the volume. The volume will be shown in the display on the remote control. To stop play, press p. A long beep sounds in the headphones. b ‘ If the playing does not start Make sure the player is not locked. See “To lock the controls”. Playing tracks repeatedly B Press the PLAY MODE button while the player is playing an MD. Each time you press the PLAY MODE button, the play mode indication changes as follows: (none) (normal play) All the tracks are played once. v "f" (all repeat) All the tracks are played repeatedly. v "f 1" (single repeat) A single track is played repeatedly. v NH-9WM 3 1 DC 1.5 V BLANK b • Err ERROR AC AC 100 V 50 60 Hz b • 82.5 19.1 80 mm b 1 2 3 30 "f SHUF" (shuffle repeat) All the tracks are played repeatedly in random order. Using other functions To know the track name and time C Press the DISPLAY button on the remote control while the player is playing an MD. Each time you press the DISPLAY button, the elapsed time of the current track and the track number, the track name and number, and the disc name and the number of the track recorded on the MD appear. Note Disc and track names appear only with MDs that have been electronically labeled. To lock the controls D On the unit, close the cover over the buttons to lock the controls of the unit. On the remote control, slide the HOLD switch in the direction of the c. To emphasize bass (Digital Mega Bass function) E ’ • p and press OPEN to open the lid.** * To go backwards or forward quickly without listening, press P and hold down =or + ( keep the control turned to =or (•+ on the remote control). ** Once you open the lid, the point to start play will change to the beginning of the first track. 3 Insert an MD. 400 rpm • • • • Pause v Full-charging takes about 60 minutes (the charger lamp goes off). A fully-charged battery should power consecutive playback for about 6 hours before you need to recharge it. • • Do this (Beeps in the headphones) Welcome! 1 • AC To 1 b= zPower Sources Other disc operation 115 g 155 g NH-9WM Slide the DIGITAL MEGA BASS switch and choose 1 (slight effect) or 2 (strong effect). To protect your hearing (AVLS) F Set the AVLS (Automatic Volume Limiter System) switch to LIMIT. The volume is kept at a moderate level, even if you try to turn the volume above the limited level. Using on a battery G Attach the supplied battery case to the player, and then insert one LR6 alkaline battery (supplied) with the correct polarity. The battery should power consecutive playback for about 8 hours before you need to replace it. When to recharge or replace the battery When b flashes in the display, the rechargeable battery or the dry battery is weak. Recharge the rechargeable battery or replace the dry battery . When the battery power is gone, "LoBATT" flashes in the display of the remote control and the power goes off. Using on house current H Before using the player, remove the rechargeble battery if it is installed. Attach the supplied battery case and connect the AC-E15L AC power adaptor (not supplied) to the DC IN 1.5V jack of the battery case. Do not use any other AC power adaptor.