Transcript
7004330 GB EyeToy® USB Camera PLAYSTATION®Eye (for PlayStation®2) SCEH-00047010571 Notes Using the PLAYSTATION®Eye camera It is recommended to•stand metres and 2.0parts, metreswhich, away from the camera. Thisbetween product1.5contains small if removed, may present a chok • Any cleaning of the EyeToy® USB Camera should be done by an adult, o ™ adult supervision. blue lens angle indicator red lens angle indicator • Do not use a moistened cloth to clean the EyeToy® USB Camera. If wate Instruction Manual Instruction Manual lens angle marker the camera to malfunction. Congratulations on your purchase of the PLAYSTATION®Eye camera. Before using the camera, Thank purchasing EyeToy® USB CameraThis (forcamera PlayStation ®2).for Before using this product, • Do not use benzene, paint thinner,lens or other chemicals, as these may dam carefullyyou readforthis manual andthe retain it for future reference. is designed use with angle selector the PLAYSTATION ®3 computer entertainment system. carefully read this manual and retain it for future reference. USB Camera. This EyeToy® USB Camera is designed for use with the PlayStation®2 computer entertainment system. • When using a commercially available cleaning cloth, follow the instructio WARNING Ensure the lens angle selector is rotated to the appropriate setting. Turn the lens angle selector to To avoid potential electric shock or starting a fire, do not expose the camera to rain, water or moisture. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Precautions Safety This product has been designed with the highest concern for safety. However, any electrical device, Precautions if used improperly, has the potential for causing fire, electric shock or personal injury. To ensure the right so that the lens angle marker is in line with the blue lens angle indicator for “wide angle view”. Alternatively, turn the lens angle selector to the left so that the lens angle marker is in line with the red lens angle indicatorthe forconnector “standard view”. Holding for the EyeToy® USB Camera with the USB mark fa ®2 con connector connector theelevation front of orthe PlayStation If your camera is positioned on theinto floor,either simplyUSB tilt the camera foronextra swivel the Connecting the EyeToy® USB Camera on theit. Players front ofofthe camera should light up angle blue to indicate camera base around (blue) to reposition different heights should tilt the of the camerathat the E to move use. the whole camera, just tilt it gently. for extra convenience.ready DO NOT accident-free operation, be sure to follow these guidelines. Safety •Observe all warnings, precautions instructions. This product has been designedand with the highest concern for safety. However, any electrical device, if that the background behind you is as motionless as possible, as background motion Make sure •Do not use the camera if it functions an causing abnormalfire, manner. may accidenthinder gameplay. Ensure there is enough room to play – watch out for shelves, doors, walls, used improperly, has the potentialinfor electrical shock or personal injury. To ensure •If the camera does not function properly, call the appropriate PlayStation® Customer Service You can pets and above all, other people. free operation, be sure to follow these guidelines. number which can be found: EyeToy® • –Observe all warnings, For further information about the PLAYSTATION®Eye camera’s voice/video chat feature, please w ithin every PlayStation®precautions , PlayStation®and 2 andinstructions. PLAYSTATION®3 format software manual; and console i • –Doonnot theplaystation.com device if it functions in an abnormal manner. refer to the PLAYSTATION®3 System Software User’s Guide at playstation.com our use website software • If the device does not function properly, call the appropriate PlayStation® customer service number Troubleshooting impaired Using and handling the PLAYSTATION®Eye camera which can be found: not expose the camera to high temperatures, high humidity or direct sunlight (operate in an Camera r The PLAYSTATION®Eye camera does not recognise your movements. –•Do within every PlayStation® and PlayStation®2 format software manual; and environment where temperatures range between 5°C and 35°C). –You may be experiencing problems with the light in your room. –Check that there are no flickering lights and that you are evenly lit from the front. •Do not put heavy objects on the camera. –Avoid using low-energy bulbs and fluorescent tubes if possible and switch on any extra Use and handling Disconnecting the EyeToy® USB Camera or modify the camera. available lights. ••Never Do notdisassemble expose the EyeToy® USB Camera to high temperatures, high humidity or direct sunlight To disconnect the EyeToy® USB Camera, pull it out by the connector. Do n •Do not twist the cable or pull it forcibly. (operate in an environment where temperatures range between 5 °C – 35 °C). The on-screen buttons activate without your interaction. this may damage it. •Do not throw or drop the camera, or physically damage it any way. ••DDo not allow liquid or small particles to get into the EyeToy® USB Camera. –There may be background motion behind you. o not touch the metal parts or insert foreign objects into the PLAYSTATION®Eye camera’s Removal of the EyeToy® USB Camera during play will result in termination –Make sure the background behind you is as motionless as possible. • USB Do not put heavy objects on the EyeToy® USB Camera. connector. –If there is a window in your background, consider drawing the curtains and using artificial lights ••Do Never disassemble modify EyeToy® USB Camera. not place or use theor camera on the an unstable surface. instead. ••Make Do not twist orroom pull to it forcibly. sure you the havecable enough play. • Do not throw or drop the EyeToy® USB Camera, or subject it to strong physical shock. Your on-screen image appears too bright or too dark. Cleaning the PLAYSTATION®Eye camera The isusage and function of the EyeToy® USB Camera may vary depending –The lighting in the room not suitable. • Do not touch the metal parts or insert foreign objects into the connector for the Dust may build up on the camera after an extended period of time. the appropriate for lights details. –If your on-screen image looks too dark,software switch onmanual all available in the room and point them EyeToy® USBthe Camera. •Before cleaning camera, disconnect it from the PLAYSTATION®3 system for safety. at you. ••Wipe Do not or surface use, the EyeToy® theplace, camera’s with a soft, dryUSB cloth.Camera on an unstable surface. –If your on-screen image looks too bright, draw the curtains and use artificial light instead. ••Use Make youtohave room play. air sure pressure cleanenough off any dust thattohas collected on the lens. You cannot see yourself on-screen. Cleaning Notes the EyeToy® USB Camera Positi –The camera is not plugged in. After EyeToy® an extended period of time, youtomay find that dust–The has camera is not positioned correctly. •Thisusing productthe contains smallUSB parts,Camera which, if for removed, may present a choking hazard children. Came •The camera be cleaned by an adult, or cleaned under close adult supervision. collected on should the unit. Place not use a damp the clothEyeToy® to clean the camera. If water it may causeit the camera to ••Do Before cleaning USB Camera, begets sureinside, to disconnect from the PlayStation ®2 top of, Interface Connector Power consumption Dimension (approx.) malfunction. console for safety. televis USB 2.0 USB DC5V, Max. 500mA 84 x 67 x 57mm •Do not use benzene, paint thinner or other chemicals, as these may damage the camera. • Wipe off the surface of the EyeToy® USB Camera with a soft, dry cloth. 1.0 m •When using a commercially available cleaning cloth, follow the instructions supplied with the •cloth. Use air pressure to clean off any dust that has collected on the lens. Weight (approx.) Cable length (approx.) Operation temperature Video capture –•Do on not ourallow website www.playstation.com liquid or small particles to get into the camera. Using the EyeToy® USB Camera Connecting the PLAYSTATION®Eye camera Securely insert the camera’s USB connector into one of the USB connectors on the front of the PLAYSTATION®3 system. The blue LED power indicator on the front of the camera should light up to indicate that it is now ready to use. Caméra USB EyeToy® To disconnect the camera, gently pull the camera’s USB connector out of(pour the PLAYSTATION 3 system. Do not pull SCEH-0004 PlayStation®2) on the cable itself as this may damage it. Removal of the camera during play will result in the Disconnecting the PLAYSTATION®Eye camera ® termination of the live feed. Mode d'emploi 173g 2 metres 5°C to 35°C 640 x 480 pixel Video format Lenshead Uncompressed or JPEG 2.1 F-stop, <1% distortion, fixed focus (25cm to ∞ at 75º FOV) Field of view Frame rate 56º to 75º FOV zoom Remarques lens 640 x 480 at 60 frames/second 320 x 240 at 120 de frames/second • Ce produit contient petits éléments qui, s'ils se détachent, présentent jeunes enfants. Design and specifications are subject to change without notice. ™ • Le nettoyage de la caméra USB EyeToy® doit être effectué par un adulte ©2007 Sony Computer Entertainment Europe. are registered trademarks of Sony Computer Entertainment Inc. All rights reserved. “2”, “PlayStation” and “PLAYSTATION” constante d'un adulte. Nous vous remercions d'avoir acheté la caméra USB EyeToy® (pour PlayStation®2). Avant de l'utiliser, • Ne nettoyez pas la caméra USB EyeToy® à l'aide d'un chiffon humide. S la caméra risque de mal fonctionner.
