Download Schwinn Mobility Scooter 250 User's Manual

250
Manual en Español Latino Americano:
http://www.schwinnfitness.com
ASSEMBLY MANUAL / OWNER’S MANUAL
Table of Contents
Important Safety Instructions - Assembly
3
Safety Warning Labels / Serial Number 4
Specifications5
Before Assembly
5
Parts6
Hardware7
Tools7
Assembly8
Leveling the Bike
21
Moving the Bike
21
Important Safety Instructions 22
Features23
Console Features
24
Remote Heart Rate Monitor
26
Operations29
Adjustments
29
Initial Setup
30
Quick Start / Manual Program
31
Guest User / Profile Program
31
User Setup Mode
32
Profile Programs
36
Fitness Test
37
Heart Rate Control Workout
37
Distance Goal Workout
38
Results/Cool Down Mode
38
Pausing or Stopping
39
User Statistics
39
Console Setup Mode
41
Maintenance43
Troubleshooting46
Limited Warranty
51
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America
(800) 605-3369, [email protected] | outside U.S. +01-360-859-5180, [email protected] |
Printed in China | © 2011 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered
trademark. Nautilus, Inc. (www.NautilusInc.com) trademarks include NAUTILUS®, BOWFLEX®, SCHWINN®
and UNIVERSAL® and respective logos. Other trademarks are the property of their respective owners
2
Important Safety Instructions
-Assembly
!
This icon means a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Obey the following warnings:
!
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not connect power supply to the machine until instructed to do so.
• Do not assemble this machine outdoors or in a wet or moist location.
• Make sure assembly is done in an appropriate work space away from foot traffic and exposure
to bystanders.
• Some components of the machine can be heavy or awkward. Use a second person when
doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or
awkward movements on your own.
• Set up this machine on a solid, level, horizontal surface.
• Do not try to change the design or functionality of this machine. This could compromise the
safety of this machine and will void the warranty.
• If replacement parts are necessary, use only genuine Nautilus® replacement parts and
hardware. Failure to use genuine replacement parts can cause a risk to users, keep the
machine from operating correctly and void the warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance
in accordance with the Manual.
• Read and understand the complete Manual supplied with this machine before first use. Keep
the Manual for future reference.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect
function.
3
Safety Warning Labels and
Serial Number
• Keep children away.
• Prior to use, read and understand the
Owners Manual.
• Injury or death is possible if Caution is not
used while using this machine.
• The maximum user weight for this
machine is 300 lbs (136 Kg).
• Replace any “Caution” “Warning” or
“Danger” label that is illegible, damaged,
or removed.
• This machine is for home use only.
•
•
•
•
300lbs. (136kg).
•
•
FCC Compliance
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4
Consult the dealer or an experienced radio/TV technician for help.
Specifications
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements: Operational Voltage: Operational Voltage 9VDC
Operating Current: 1500mA
46”
(117 cm)
Regulatory Approvals:
AC Power Adapter:UL listed, CSA certified (or
equivalent), Rated 120V 60Hz
Input, 9VDC, 1500mA Output.
Class 2 or LPS.
63” (160 cm)
25”
(63.5 cm)
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the
location must be on a hard, level surface. Allow a workout area of a minimum 103” x 65” (2.6m x
1.7m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
• The assembly requires 2 people.
5
PARTS
3
5
6
1
9
4
10
2
7
8
15
11
14
16
17
13
Item
Qty
1
1
2
Item
Qty
Rear Stabilizer
10
1
Seat Bottom
1
Front Stabilizer
11
1
Seat Rail *
3
1
Seat Frame
12
1
Console Mast
4
1
Frame
13
1
AC Adapter
5
1
Console
14
1
Left Pedal
6
1
Console Bracket
15
1
Right Pedal
7
1
Handlebar Bracket
16
1
Upright Handlebar
8
1
Seat Rail Bracket *
17
1
Side Handlebar
9
1
Seat Back
6
Description
12
* Pre-installed on Frame (Item 4).
Description
HARDWARE / TOOLs
A
B
C
D
K
Item
Qty
A
1
B
E
F
L
M
Description
G
H
I
J
N
Item
Qty
Description
Carriage Bolt, M8x85
H
1
Mounting Bracket
1
Hex Bolt, M8x85
I
2
Hex Bolt, M7x30
C
1
Console Tilt Adjustment Knob
J
4
Curved Washer, M8
D
8
Button Head Hex Screw, M8x16
K
4
Cap
E
1
Lock Nut, M8
L
8
Button Head Hex Screw, M8x45
F
4
Hex Screw, M8x16
M
2
Lock Washer, M6
G
14
Flat Washer, M8
N
2
Flat Washer, M6
Tools
Included Not Included
(recommended)
6 mm
7
ASSEMBLY
1. Remove Seat Rail from Frame and Disconnect Heart Rate Cable
NOTICE: Make sure that the heart rate cable does not fall into the frame tube. Hardware is
not on hardware card.
4
X7
D
11
G
2. Remove Seat Rail Bracket from Seat Rail
NOTICE: Hardware is not on hardware card.
X2
G
D
8
8
3. Attach Stabilizers to Frame
X4
F
1
2
4. Attach Side Handlebar to Seat Frame
3
17
X4
G
D
9
5. Attach Seat Pads to Seat Frame Assembly
9
10
X8
G
L
6. Loosen and Pull the Seat Post Adjustment Knob to Slide Seat Assembly onto Seat Rail
NOTICE: Do not crimp the Heart Rate Cable.
Note: Lock the Adjustment Knob into one of the Seat Rail locking holes.
11
10
7. Connect Heart Rate Cable to Seat Assembly
NOTICE: Do not crimp the Heart Rate Cable.
8. Attach Seat Rail Bracket to Seat Rail Assembly
NOTICE: Do not crimp the Heart Rate Cable. Hardware was pre-installed and not on
hardware card.
X2
8
G
D
11
9. Attach Seat Rail Assembly to Frame Assembly
NOTICE: Do not crimp the Heart Rate Cable. Hardware was pre-installed and not on
hardware card.
X7
G
D
12
10. Attach Console Mast to Frame Assembly
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do
not crimp Console Cable.
12
J
X4
D
13
11. Attach Upright Handlebar to Console Mast
X2
16
N
M
I
H
7
14
12. Attach Console Bracket to Console Mast
NOTICE: Do not crimp the cables.
X1
A
6
G
B
X1
C
E
G
15
13. Remove Hardware from Console
NOTICE: Do not crimp the cables.
Note: H
ardware is pre-installed *.
5
X4
*
16
14. Connect Cables and Attach Console to Frame Assembly
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not
crimp Console Cable. Do not fully tighten the hardware.
X4
*
17
15. Adjust and Tighten the Console Mast and Console
NOTICE: Tighten hardware and install Caps.
X4
#2
K
18
16. Attach Pedals to Frame Assembly
15
14
19
17. Connect AC Adapter to Frame Assembly
13
18. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in
accordance with the Owner’s Manual.
20
BEFORE YOU START
Leveling the Bike
Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer,
turn the knob to adjust the stabilizer foot.
To adjust the leveler on the Frame Rail:
1.Loosen the upper locking nut.
2.Turn the leveler to adjust the height.
3.Tighten the upper locking nut to lock the leveler.
Make sure the bike is level and stable before you exercise.
13 mm
Moving the Bike
To move the recumbent bike, carefully lift the rear end of the bike
and slowly push it to the desired location.
NOTICE: B
e careful when you move the bike. All abrupt motions
can affect the computer operation.
21
Important Safety Instructions
!
This icon means a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Before using this equipment, obey the following warnings:
!
Read and understand the complete Manual. Keep the Manual for future reference.
ead and understand all warnings on this machine. If at any time the Warning stickers
R
become loose, unreadable or dislodged, contact Nautilus® Customer Service for
replacement stickers.
•
Children must not be let on or near to this machine. Moving parts and other features of the
machine can be dangerous to children.
•
Not intended for use by anyone under 14 years of age.
•
Consult a physician before you start an exercise program. Stop exercising if you feel pain
or tightness in your chest, become short of breath, or feel faint. Contact your doctor before
you use the machine again. Use the values calculated or measured by the machine’s
computer for reference purposes only.
•
Before each use, examine this machine for loose parts or signs of wear. Do not use if found
in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus®
Customer Service for repair information.
•
Maximum user weight limit: 300 lbs. (136 kg). Do not use if you are over this weight.
•
This machine is for home use only.
•
Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put
fingers or other objects into moving parts of the exercise equipment.
•
Set up and operate this machine on a solid, level, horizontal surface.
•
Make the Pedals stable before you step on them. Use caution when you step on and off the
machine.
•
Disconnect all power before servicing this machine.
•
Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals
clean and dry.
•
Keep at least 19.7” (0.5 m) on each side of the machine clear. This is the recommended
safe distance for access and passage around and emergency dismounts from the machine.
Keep third parties out of this space when machine is in use.
•
Do not over exert yourself during exercise. Operate the machine in the manner described in
this manual.
•
Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the
Adjustment Devices do not hit the user.
22
FEATURES
A
P
Q
O
B
C
D
N
M
J
H
U
Q
T
S
L
K
R
E
I
G
F
H
A
Console
L
Seat Adjustment Knob
B
Console Bracket
M
Contact Heart Rate (CHR) Sensors
C
Console Adjustment Knob
N
Adjustable Seat
D
Handlebar, Upright
O
Handlebar, Side
E
Fully Shrouded Flywheel
P
Transport Handle
F
Transport Wheel
Q
MP3 Input
G
AC Adapter Plug
R
Water Bottle Holder
H
Stabilizer
S
Speakers
I
Pedals
T
Fan
J
Leveler
U
Media Tray
K
Entertainment Rack
23
Console Features
The Console provides important information about your workout and lets you control the
resistancelevelswhileyouexercise.TheConsolehasagriddisplaywithtouchcontrolbuttonsto
navigateyouthroughtheexerciseprograms.
Keypad Functions
FAN button- Controls 3-speed fan
Schwinn Advantage™ button- Controls the two
programmed users
QUICKSTARTbutton-BeginsaQuickStart
workout
STOP button- Pauses an active workout, ends
a paused workout, or goes back to the previous
screen.
Increase () button- Increases a value (age, time,
distance, calories, or workout resistance level) or
moves through options
TIME
SPEED
INTERVAL
RPM K M WATT
DISTANCE
START/ENTER button- Starts a Program
workout, confirms information, or resumes a
paused workout. Push and hold for 3 seconds to
begin a Guest User / Profile Program workout.
Decrease () button- Decreases a value (age,
time, distance, calories, or workout resistance
level) or moves through options
24
LEVEL
CALORIES
PULSE
LCD Display Data
Program Display
The Program Display shows the name of the program selection and
the grid display area shows the course profile for the program. Each
column in the profile shows one interval (workout segment). The
higher the column, the higher the resistance level. The flashing column
shows your current interval.
TIME
Time / Interval
The TIME display field shows the time count of the workout for 6
seconds, and then the current INTERVAL segment of the workout for
6 seconds.
If the workout has a preset time, the time display starts at the preset
value and counts down to zero. If no preset time is set up for the
current workout program, the display value starts at zero and counts
forwarduntiltheendoftheworkout.Maximumtimeis99:59.The
time display shows the total time count for the workout.
SPEED
INTERVAL
RPM K M WATT
DISTANCE
LEVEL
CALORIES
PULSE
Speed / RPM
The SPEED display field shows the machine speed in miles per hour (mph) or kilometers per hour
(km/h) for 6 seconds , and then the machine revolutions per minute (RPM) for 6 seconds.
Distance
The Distance display shows the distance count (miles or km) in the workout.
Note: To change the measurement units to English Imperial or metric, refer to the “Console
Setup Mode” section in this manual.
Watt / Level
The WATT display field shows the power that you are producing at the current resistance level
(1 horsepower = 746 watts) for 6 seconds, and then the current resistance LEVEL (1–16) for 6
seconds.
Calories
TheCaloriesdisplayfieldshowstheestimatedcaloriesthatyouhaveburnedduringtheexercise.
25
Pulse (Heart Rate)
The Pulse display shows the heart rate in beats per minute (BPM) from the heart rate monitor.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or
tightness in your chest, become short of breath, or feel faint. Contact your doctor before you
use the machine again. Use the values calculated or measured by the machine’s computer
for reference purposes only.
Remote Heart Rate Monitor
Monitoring your Heart Rate is one of the best procedures to control the intensity of your exercise.
Contact Heart Rate (CHR) sensors are installed to send your heart rate signals to the Console. The
Console can also read telemetry HR signals from a Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.
Note: T
he heart rate chest strap must be an uncoded heart rate strap from Polar Electro or an
uncoded POLAR® compatible model. (Coded POLAR® heart rate straps such as POLAR®
OwnCode® chest straps will not work with this equipment.)
If you have a pacemaker or other implanted electronic device, consult your doctor before
using a wireless chest strap or other telemetric heart rate monitor.
Contact Heart Rate Sensors
Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors
are the stainless steel parts of the Handlebars. To use, put your hands comfortably around the
sensors. Be sure that your hands touch both the top and the bottom of the sensors. Hold firm, but
not too tight or loose. Both hands must make contact with the sensors for the Console to detect a
pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.
Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds.
The Console will now validate the heart rate. Many factors influence the ability of the sensors to
detect your heart rate signal:
• Movement of the upper body muscles (including arms) produces an electrical signal (muscle
artifact) that can interfere with pulse detection. Slight hand movement while in contact with the
sensors can also produce interference.
• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.
26
• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be
detected by the sensors.
• The proximity of other electronic machines can generate interference.
CHR detection may be limited to walking or slow jogging due to the extreme muscle artifacts and
hand motion generated by a comfortable running style. If your heart rate signal ever seems erratic
after validation, wipe off your hands and the sensors and try again.
Heart Rate Calculations
Your maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in childhood
to approximately 160 BPM by age 60. This fall in heart rate is usually linear, decreasing by
approximately one BPM for each year. There is no indication that training influences the decrease
in maximum heart rate. Individuals of the same age could have different maximum heart rates. It is
more accurate to find this value by completing a stress test than by using an age related formula.
Your at-rest heart rate is influenced by endurance training. The typical adult has an at rest heart
rate of approximately 72 BPM, where as highly trained runners may have readings of 40 BPM or
lower.
The Heart Rate table is an estimate of what Heart Rate Zone (HRZ) is effective to burn fat and
improve your cardiovascular system. Physical conditions vary, therefore your individual HRZ could
be several beats higher or lower than what is shown.
27
The most efficient procedure to burn fat during exercise is to start at a slow pace and gradually increase your intensity until your heart rate reaches between 60 – 85% of your maximum heart rate.
Continue at that pace, keeping your heart rate in that target zone for over 20 minutes. The longer
you maintain your target heart rate, the more fat your body will burn.
The graph is a brief guideline, describing the generally suggested target heart rates based on age.
As noted above, your optimal target rate may be higher or lower. Consult your physician for your
individual target heart rate zone.
Note: As with all exercises and fitness regimens, always use your best judgment when you
increase your exercise time or intensity.
FAT-BURNING TARGET HEART RATE
Heart Rate BPM (beats per minute)
250
200
196
167
191
162
186
181
158
154
150
100
118
115
112
109
176
171
150
145
106
103
141
100
161
137
97
156
133
94
151
128
91
146
126
88
50
0
20-24 25-29 30-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69
Age
Maximum Heart Rate
Target Heart Rate Zone
(keep within this range
for optimum fat-burning)
28
166
70+
Operations
What to Wear
Wear rubber-soled athletic shoes. You will need the appropriate clothes for exercise that allow you
to move freely.
How Often Should You Exercise
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the
machine again. Use the values calculated or measured by the machine’s computer for reference
purposes only.
• 3 times a week for 30 minutes each day.
• Schedule workouts in advance. Try to work out even when you do not want to.
Seat Adjustment
Correct seat placement encourages exercise efficiency and comfort,
while reducing the risk of injury.
1.With a Pedal in the forward position, place the ball of your foot
over the center of it. Your leg should be bent slightly at the knee.
2.If your leg is too straight or your foot cannot touch the Pedal,
move the seat forward. If your leg is bent too much, move the
seat toward the back.
Step off the bike before you adjust the seat.
3.
Loosen and pull the adjustment knob on the seat tube. Adjust the
seat to the desired height.
4.
Release the adjustment knob to engage the locking pin. Be sure
that the pin is fully engaged and fully tighten the knob.
Foot Position / Pedal Strap Adjustment
Foot pedals with straps provide secure footing to the exercise bike.
1.Rotate the Pedals until one can be reached.
2.Put the ball of each foot on the Pedals.
3.Fasten the strap over the shoe.
4.Repeat for the other foot.
29
Be sure toes and knees point directly forward to ensure maximum Pedal efficiency. Pedal straps
can be left in position for subsequent workouts.
Console Adjustment
To adjust the Console tilt position:
1.Loosen the knob behind the Console.
2. Carefully move the Console tilt to one of the available positions.
3.Tighten the knob.
Power-Up / Idle Mode
The Console will enter Power-Up / Idle Mode if it is plugged into a
power source, any button is pushed, or if it receives a signal from the
RPM sensor as a result of pedaling the machine.
Auto Shut-Off (Sleep Mode)
If the Console does not receive any input in approximately 5 minutes, it will automatically shut off.
The LCD display is off while in Sleep Mode.
Note: The Console does not have an On/Off switch.
Initial Setup
During the first power-up, the Console must be setup for your preferred measurement units, the
machine type, and brightness of the screen.
1.Units of Measurement: Push the Increase/Decrease buttons to change between “Miles-Lb”
(Imperial English) or “Km-Kg” (metric).
2. Push START/ENTER to set.
3. M
achine Type: Push the Increase/Decrease buttons to change between “BIKE” and
“ELLIPTICAL”.
4. Push START/ENTER to set.
5.Backlight: Push the Increase/Decrease buttons to change the screen brightness, with “1” the
brightest and “5” the darkest.
6. Push START/ENTER to set. The Console goes back to the Power-Up / Idle Mode screen.
Note: To change these choices, consult the “Console Set-Up Mode” section.
30
Quick Start / Manual Program
The Quick Start / Manual program lets you start a workout without entering any information.
1. Sit on the machine.
2. Push the QUICK START button to start the QUICK START / MANUAL program.
3.To change the resistance level, push the Increase/Decrease buttons. The current interval
and future intervals are set to the new level. The default Quick Start resistance level is 3. The
time will count up from 00:00.
Note: The maximum time value is 99:59.
4. Push STOP when done with your workout.
Guest User / Profile Program
The Guest User / Profile program lets you select a profile workout without entering any information.
1. Sit on the machine.
2. Push and hold the the START/ENTER button for 3 seconds.
3. Use the Increase() or Decrease() buttons to select one of the profile programs. Push
START/ENTER to select the profile program.
4. Use the Increase() and Decrease() buttons to adjust the workout time. Push START/ENTER.
Note: T
he range of values for TIME is 5 - 99 minutes; the default value is 30:00.
5. Use the Increase() and Decrease() buttons to adjust the resistance level. Push START/
ENTER.
Note: T
he range of values for LEVEL is 1 - 16; the default resistance level is 3.
6. Push the START/ENTER button to start the profile workout. The time will count down from
the set time.
31
Schwinn Advantage™ User Setup Mode
The Schwinn® 50 Series console lets you store and use 2 User profiles. The User profiles automatically record the workout results for each User profile, and lets you view your workout data.
The User profile stores the following data:
•
•
•
•
•
ame—up to 19 characters
N
Age
Weight
Gender
a Custom Workout (program profile)
•
•
•
•
•
otal time (last workout, average, and total)
T
Average speed (last workout, average, and total)
Total distance (last workout, average, and total)
Total calories (last workout, average, and total)
Total workouts
Note: Push the STOP button to go back to the previous screen.
Add User Profile
1.From the Power-Up Mode screen, push the Schwinn Advantage™ button and hold for 3 seconds to go to User Setup Mode.
Note: If no User Profile is set up, the Console will show the Name prompt for User 1. If a User
Profile does exist, use the Increase/ Decrease buttons to select User 2 and push START/
ENTER.
2.The Console display scrolls across the screen “ENTER NAME” with the first character prompt
of “A”.
Note: U
se the Increase/Decrease buttons to move through the alphabet and blank space
(found between A and Z). To set each letter, push the START/ENTER button.
Push and hold the START/ENTER button for 3 seconds to complete the entry and go to the
next data prompt.
3.The Console display shows the “AGE 30” prompt. Use the Increase/Decrease buttons to
adjust the default value, and push START/ENTER to complete the entry and go to the next
prompt.
4.The Console display shows the “WEIGHT 150” prompt. Use the Increase/Decrease buttons
to adjust the default value, and push START/ENTER to complete the entry and go to the next
prompt.
32
5.The Console display shows the “GENDER MALE” prompt. Use the Increase/Decrease buttons
to adjust the default value, and push START/ENTER to complete the entry and go to the next
prompt.
Note: D
ue to screen limitations, “FEMLE” is the abbreviation for female.
6.The Console display shows the “CREATE CUSTOM YES” prompt. Use the Increase/Decrease
buttons to move to the YES or NO option. To start setup of your Custom Workout, go to YES
and push START/ENTER.
To complete User Setup without a Custom Workout, go to the NO option and push START/
ENTER. The Console goes back to the Power-Up Mode screen.
Note: T
he Custom workout can be created at a later time by editing the User.
7.If you start the Custom Workout setup, the Program Display will show the left column (workout
interval) is active, with a default resistance level of 3. Use the Increase/Decrease buttons to
adjust the resistance level of the active interval. Push START/ENTER to record the resistance
level. The next column to the right becomes active.
Note: T
he Console display shows the message “N of 20” during setup (N is the current interval).
The maximum number of intervals is 20. A minimum of 10 intervals must be set.
Push and hold START/ENTER to complete the Custom Workout setup.
8.The Console goes back to the Power-Up Mode screen
User Profile Workout Program
1.From the Power-Up Mode screen, push the Schwinn Advantage™ button to go to User Selection Mode.
2.Use the Increase/ Decrease buttons to select a User Profile and push START/ENTER.
Note: If no User Profile is set up, the Console will go to the User Setup Mode.
3.
VIEW STATS and WORKOUT. Use the Increase/Decrease buttons to choose an option,
and push START/ENTER to make your selection. The User Statistics option lets you see a
summary of your workout data (see the User Statistics section). The Workout option lets you
select a workout profile program and begin a workout.
4. To workout, use the Increase() or Decrease() buttons to select one of the profile programs.
Push START/ENTER to select the profile program.
Note: The Custom workout will be one of the profile programs if setup.
33
5. Use the Increase() and Decrease() buttons to adjust the workout time. Push START/ENTER.
Note: T
he range of values for TIME is 5 - 99 minutes; the default value is 30:00.
6. Use the Increase() and Decrease() buttons to adjust the workout LEVEL. Push START/ENTER.
Note: T
he range of values for LEVEL is 1 - 16; the default start value is 3.
7. Push the START/ENTER button to start the profile workout. The time will count down from the
set time.
Edit User Profile
1.From the Power-Up Mode screen, push Schwinn Advantage™ button and hold for 3 seconds to
go to User Setup Mode. The Console will display the name of User Profile 1. Use the Increase/
Decrease buttons to move through the User Profiles, and push START/ENTER to make your
selection.
o exit the User Selection option, push STOP and the console will go back to the Power-Up
T
Mode screen.
2.The Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE
<Name>). Use the Increase/Decrease buttons to move through the Edit menu options, and
push START/ENTER to make your selection.
o exit the Edit User option, push STOP and the console will go back to the User Selection
T
option.
3.
After you start the Edit function, the Console will show the Name prompt. To edit the name,
push START/ENTER.
Note: U
se the Increase/Decrease buttons to move through the alphabet and blank space
(found between A and Z). To set each letter, push the START/ENTER button.
ush and hold START/ENTER to complete the entry and go to the next data prompt. Or you
P
can tap the START/ENTER button to add spaces until the next data screen appears.
4.To edit the other User data, push START/ENTER at the screen prompt: EDIT AGE, EDIT
WEIGHT, EDIT GENDER. Use the Increase/Decrease buttons to adjust, and push START/
ENTER to complete each entry and go to the next prompt.
5.The Console display shows the CUSTOM prompt. To edit your Custom Workout, push START/
ENTER.
34
6.The Program Display will show the left column (workout interval) is active. Use the Increase/
Decrease buttons to adjust the resistance level of the active interval. Push START/ENTER to
record the resistance level. The next column to the right becomes active.
Note: T
he Console display shows the message “N of 20” during setup (N is the current
interval). The maximum number of intervals is 20. A minimum of 10 intervals must be set.
Push and hold START/ENTER to accept the Custom Workout.
7. When done, push STOP and the Console will go back to the User Selection option.
Delete a User Profile
1.From the Power-Up Mode screen, push the Schwinn Advantage™ button and hold for 3 seconds to go to User Setup Mode. The Console will display the name of User Profile 1. Use the
Increase/Decrease buttons to move through the User Profiles, and push START/ENTER to
make your selection.
o exit the Schwin® Advantage option, push STOP and the console will go back to the PowerT
Up Mode screen.
2.
The Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE
<Name>). Use the Increase/Decrease buttons to go to the Delete option, and push START/
ENTER to make your selection.
o exit the Delete option, push STOP and the console will go back to the Edit and Delete
T
options.
3.
After you start the Delete function, the Console will show a prompt to delete the User profile, or
not delete the user and go back to the Edit and Delete options. Push START/ENTER to make
your selection.
4. After you delete the user, the Console will go to the Create, Edit and Delete options.
Custom Workout
After your Custom Workout is set up in your User Profile, you can start the program from the
CUSTOM workout option in the Program Menu. The Console display will prompt you to set the
Time for the workout (default is 30:00). Use the Increase/Decrease buttons to adjust the Time
value, and push START/ENTER to set the time.
35
Profile Programs
These programs automate different resistances and workout levels.
Course 1 Course 2
Course 3 Pursuit 1 Pursuit 2
Circuit 1 Circuit 2
Circuit 3
Changing Resistance Levels
Push the Increase() or Decrease() buttons to change the resistance level at any time in a workout program.
36
Fitness Test
The Fitness Test measures the improvements of your physical fitness level. The test compares
your power output (in Watts) to your heart rate. As your fitness level improves, your power output
will increase at a given heart rate.
You can start the Fitness Test from the FITNESS TEST option in the Program Menu. The Fitness
Test program first prompts you to select your fitness level—Beginner or Advanced. The program
will use the Age and Weight values in your User profile to calculate your Fitness Score. If you are a
Guest User, the program will prompt you to enter your age and weight before you start the test.
Start to pedal and hold the Heart Rate Sensors. When the test starts, the power (Watts) slowly
increases. This means you will work harder, and as a result, your heart rate increases. The Watts
continues to increase automatically until your heart rate reaches the “Test Zone.” This zone is
individually computed to be near 75 percent of your maximum heart rate. When you reach the Test
Zone your machine holds the Watts steady for 3 minutes. This lets you reach a stable condition
(where your heart rate becomes steady). At the end of the 3 minutes, the Console measures your
heart rate and the power output (Watts). These numbers, along with information about your age
and weight, are computed to produce a “Fitness Score”.
Note: F
itness Test scores should only be compared to your previous scores and not other
users.
Compare your Fitness Scores to see your improvement.
Heart Rate Control (HRC) Workout
The Heart Rate Control (HRC) program lets you set a heart rate goal for your workout. The program monitors your heart rate in beats per minute (BPM) from the Contact Heart Rate (CHR) sensors on the machine or from a Heart Rate Monitor (HRM) chest strap.
Note: T
he console must be able to read the heart rate information from the CHR sensors or
HRM for the HRC program to work correctly.
If you go to the HRC program from your User profile, the Target Heart Rate program uses your
age and other user setup information to set the Heart Rate Zone values for your workout. If you
are a Guest User, the program will prompt you to enter your age and weight before you start the
workout. The console display then gives prompts for you to set up your workout:
1.Set the workout level: BEGINNER or ADVANCED.
2. Set the percentage of maximum heart rate: 60–70%, 70–80%, 80–90%.
Consult a physician before you start to exercise in the 80–90% heart rate zone.
37
3.Set the Time for the workout. (The default value is 10:00.)
For more detailed information about fitness zones, please refer to the fitness information on our
website: www.schwinnfitness.com.
Distance Goal Program
The Distance Goal Program lets you set the total Distance and Pacer Speed for your workout.
If you go to the Distance Goal program from your User profile, the program will use the Age and
Weight values in your User profile. If you are a Guest User, the program will prompt you to enter
your age and weight before you start the workout. The console display then gives prompts for you
to set up your workout:
1.Enter the distance with the Increase() and Decrease() buttons (default is 20 mi/ 20 km).
Push START/ENTER
2.Enter the pacer speed with the Increase() and Decrease() buttons (default is 25 mph/ 25
km/h). Push START/ENTER.
3.The workout starts at level 1. To adjust the resistance, use the Increase/Decrease buttons.
4.The TIME display starts to count up from 00:00.
Results / Cool Down Mode
After a workout the TIME display shows 00:00 and then starts to count up. During this Cool Down
period, the Console shows the Workout Results and your current Heart Rate. All workouts except
Quick Start have a 3-minute Cool Down period.
The LCD display shows each workout data value for 4 seconds: TIME, DISTANCE, CALORIES,
AVG/MPH (KMH), AVG/HR, MAX HR. You can use the Increase/Decrease buttons to move
through the results manually. The HR display shows the current BPM value.
The Level during Cool Down is based on the Level at the end of the workout:
End Level
Level ≤ 3
3 < Level ≤ 10
10 < Level
Cool Down Level
1
3
5
You can push STOP to stop the Results display and go back to Power-Up Mode. If there is no
RPM or HR signal, the Console automatically goes into Sleep Mode.
38
Pausing or Stopping
The Console will go into Pause Mode if the user pushes STOP during a workout, or there is no
RPM signal for 5 seconds (user not pedaling). The Console display shows WORKOUT PAUSED,
and after 4 seconds the current workout data starts to scroll automatically (the same format as
Results Mode). You can use the Increase/Decrease buttons to move through the results manually.
1. Push the STOP button to pause your workout.
2. To continue your workout, push START/ENTER or start pedaling.
o stop the workout, push the STOP button. The Console will go into Results / Cool Down
T
mode.
User Statistics
Each User Profile stores the statistics from all workout data recorded for that user in three capacities - Last Workout, Averages, and Totals.
When the TOTALS displayed for a statistic exceeds the maximum value, the count will start again
at zero.
•
•
•
•
•
otal number of workouts—maximum is 9999.
T
Total hours—maximum is 999:59 (999 hours, 59 minutes).
Average speed—mph or km (per units in setup)
Total distance—maximum is 9999.9.
Total calories—maximum is 999999.
The Statistics option in the User profile menu lets you look at the recorded data or delete it.
1.Push the Schwinn Advantage™ button at the Power-Up Mode screen. The Console display
shows the User Profiles.
2.Use the Increase() and Decrease() buttons to select a User profile, and push START/ENTER to make your selection.
3. A
fter you select the User profile option, you have two options: VIEW STATS and WORKOUT.
Use the Increase() and Decrease() buttons to go to the Statistics option, and push START/
ENTER to make your selection.
4. T
he Console display shows the User Statistics menu options—LAST WORKOUT, AVERAGES
and TOTALS. Use the Increase/Decrease buttons to move between the menu options, and
push START/ENTER to make your selection.
5.Use the Increase/Decrease buttons to move between the values, or after a few seconds the
workout statistics start to scroll automatically. You can use the Increase/Decrease buttons to
move through the results manually. Push STOP to exit to the User Statistics menu.
39
In TOTALS, there is a RESET STATS option to clear the accumulated workout values. Use the
Increase/Decrease buttons to change your selection between YES and NO, and push START/
ENTER. Push STOP to exit the RESET STATS option.
6. Push STOP to go back to the User profile menu—Stats and Workout options.
40
CONSOLE SETUP MODE
The Console Setup Mode lets you set the units of measurement to either English or Metric,
change the machine type, or see maintenance statistics (Error Log and Run Hours – for service
technician use only).
1.Hold down the Increase button and Decrease button together for 3 seconds while in the
Power-Up Mode to go into the Console Setup Mode.
Note: Push STOP to go back to the previous screen or the Power-Up Mode screen.
2.The Console display shows the Units prompt. Push START/ENTER to start Units option. Push
the Increase/Decrease buttons to change between “Miles-Lb” (Imperial English units) and
“Km-Kg” (metric units).
Note: If the units change when there is data in User Statistics, the statistics convert to the new
units.
3. Push START/ENTER to set.
4.The Console display shows the Machine Type prompt. Push START/ENTER to start Machine
Type option. Push the Increase/Decrease buttons to change between ELLIPTICAL and BIKE.
5. Push START/ENTER to set.
6.The Console display shows the Brightness prompt. Push START/ENTER to start the
brightness option. Push the Increase/Decrease buttons to change the brightness levels from 1
(brightest) to 5 (darkest).
7. Push START/ENTER to set.
8.The Console display shows the Error Log prompt. Push START/ENTER to start Error Log
option. The Error Log stores the last 10 errors (error type and system time of error), listed
newest to oldest. Push the Increase/Decrease buttons to move through the Error Log. If there
are no errors, the Console display shows “Index=0”.
9. Push STOP to exit.
10.The Console shows the TOTAL HOURS prompt. Push START/ENTER to see total hours for
the machine.
11. Push STOP to exit.
12.The Console display shows the Units prompt again. Push STOP to go back to the Power-Up
Mode screen.
41
42
MAINTENANCE
Read all maintenance instructions fully before you start any repair work. In some conditions, an
assistant is required to do the necessary tasks.
!
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance is done. Worn or damaged components
must be repaired or replaced immediately. Only manufacturer supplied components can
be used to maintain and repair the equipment.
!
This product, its packaging, and components contain chemicals known to the State of
California to cause cancer, birth defects, or reproductive harm. This Notice is provided in
accordance with California’s Proposition 65. If you would like additional information,
please refer to our website at www.nautilus.com/prop65.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure location.
Before each use, examine the exercise machine for loose, broken,
damaged, or worn parts. Do not use if found in this condition. Repair or
replace all parts at the first sign of wear or damage. After each workout,
use a damp cloth to wipe your machine and Console free of sweat.
Daily:
Note: Avoid excessive moisture on the Console.
Weekly:
Clean the machine to remove any dust, dirt, or grime from the surfaces.
Check for smooth seat slider operation. If needed, apply a very thin
coating of silicone lube to ease operation.
Note: Do not use petroleum based products.
Monthly
or after 20 hours:
Check pedals and crank arms and tighten as necessary. Make sure all
bolts and screws are tight. Tighten as necessary.
NOTICE: D
o not clean with a petroleum based solvent or an automotive cleaner. Be
sure to keep the Console free of moisture.
43
Maintenance Parts
B
C
K
D
A
J
E
F
L
M
I
H
G
CC
Q
N
O
BB
AA
Z
Y
T
U
V
W
X
44
Q
S
R
P
A
Console
K
Seat Back
U
Speed Sensor Magnet
B
Console Bracket
L
Transport Handle
V
Drive Belt
C
Console Cable
M
HR Sensors
W
Flywheel
D
Heart Rate Sensor
Cable, Upper
N
Leveler
X
Brake Magnet
E
Console Adjustment
Knob
O
Rear Stabilizer
Y
Front Stabilizer
F
Handlebar, Upper
P
Pedal, Left
Z
Transport Wheel
G
Console Mast
Q
Center Plate
AA
Shroud, Right
H
Seat Adjustment
Knob
R
Shroud, Left
BB
AC Adapter Plug
I
Seat Bottom
S
Crank Arm
CC
Pedal, Right
J
Handlebar, Side
T
Speed Sensor
45
Troubleshooting
Condition/Problem
No display/partial display/
unit will not turn on
Things to Check
Solution
Check electrical (wall)
outlet
Make sure unit is plugged into a functioning wall outlet.
Check connection at front
of unit
Connection should be secure and undamaged. Replace adapter or connection at unit if either are damaged.
Check data cable integrity
All wires in cable should be intact. If
any are visibly crimped or cut, replace
cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Check console display for
damage
Check for visual sign that console display is cracked or otherwise damaged.
Replace Console if damaged.
Console Display
If Console only has partial display and
all connections are fine, replace the
Console.
If the above steps do not resolve the
problem, contact Customer Care for
further assistance.
Unit operates but Contact
HR not displayed
46
HR cable connection at
Console
Be sure cable is connected securely to
Console.
HR cable box connection
Be sure cables from handlebars and
cable to Console are secure and undamaged.
Sensor grip
Be sure hands are centered on HR
sensors. Hands must be kept still with
relatively equal pressure applied to each
side.
Dry or calloused hands
Sensors may have difficulty with dried
out or calloused hands. A conductive electrode cream such as “Signa
Crème” or “Buh-Bump” can help make
better conduct. These are available on
the web or at medical or some larger
fitness stores.
Unit operates but Telemetric HR not displayed
Handlebars
If tests reveal no other issues, Handlebars should be replaced.
Chest Strap (optional)
Strap should be “POLAR®” compatible and uncoded. Make sure strap is
directly against skin and contact area
is wet.
Interference
Try moving unit away from sources of
interference (TV, Microwave, etc).
Replace Chest Strap
If interference is eliminated and HR
does not function, replace strap.
Replace Console
If HR still does not function, replace
Console.
Console displays “E2” error Check data cable integrity
code
No speed/RPM reading,
Console displays “Please
Pedal” error code
All wires in cable should be intact. If any
are cut or crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Console Electronics
If tests reveal no other issues, Console
should be replaced.
Check data cable integrity
All wires in cable should be intact. If any
are cut or crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor (requires shroud removal)
Speed sensor should be aligned with
magnet and connected to data cable.
Realign sensor if necessary. Replace if
there is any damage to the sensor or
the connecting wire.
47
Condition/Problem
Console shuts off (enters
sleep mode) while in use
Fan will not turn on or will
not turn off
Fan will not turn on, but
Console operates
48
Things to Check
Solution
Check electrical (wall)
outlet
Make sure unit is plugged into a functioning wall outlet.
Check connection at front
of unit
Connection should be secure and undamaged. Replace adapter or connection at unit if either are damaged.
Check data cable integrity
All wires in the cable should be intact. If
any are cut or crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Reset machine
Unplug unit from electrical outlet for 3
minutes. Reconnect to outlet.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor
Contact Customer Care for further
assistance.
Check data cable integrity
All wires in cable should be intact. If any
are cut or crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Reset machine
Unplug unit from electrical outlet for 3
minutes. Reconnect to outlet.
Check for blockage of fan
Unplug unit from electrical outlet for 5
minutes. Remove material from fan. If
necessary, detach the Console to help
with removal. Replace the Console if
unable to remove blockage.
Unit rocks/does not sit
level
Check leveler adjustment
Adjust levelers until bike is level.
Check surface under unit
Adjustment may not be able to compensate for extremely uneven surfaces.
Move bike to level area.
Check pedal to crank arm
connection
Pedal should be tightened securely to
crank. Insure connection is not crossthreaded.
Check crank arm to axle
connection
Crank should be tightened securely to
axle. Be sure cranks are connected at
180 degrees from each other.
Clicking sound when
pedaling
Check pedal to crank arm
connection
Remove pedals and reattach.
Seat post movement
Check locking pin
Be sure adjustment pin is locked into
one of the seat rail adjustment holes.
Check adjustment knob
Be sure knob is securely tightened.
Pedals loose/unit difficult
to pedal
49
50
LIMITED WARRANTY
Who Is Covered
This warranty is valid only to the original purchaser and is not transferable or applicable to any other
person(s).
What Is Covered
Sears, Roebuck and Co. warrants that this product is free from defects in materials and workmanship,
when used for the purpose intended, under normal conditions, and provided it receives proper care
and maintenance as described in the Product’s Assembly and Owner’s manual. This warranty is good
only for authentic, original, legitimate machines manufactured by Nautilus, Inc. and sold through an
authorized agent and used in the United States or Canada.
Terms
•
•
•
•
•
Frame 5 years
Mechanical parts
1 year
Electronics1 year
Wear items 3 months
Labor 3 months
(Labor support does not include the installation of replacement parts involved in the initial product assembly and preventative maintenance services.)
What You Must Do
•
To arrange for warranty service, call 1-800-4-MY-HOME®.
What Is Not Covered
•
•
•
•
•
Damage due to abuse, tampering or modification of the Product, failure to properly follow assembly
instructions, maintenance instructions, or safety warnings as stated in the Product Documentation
(Assembly, Owner’s Manuals, etc), damage due to improper storage or the effect of environmental
conditions such as moisture or weather, misuse, mishandling, accident, natural disasters, power
surges.
A machine placed or used in a commercial or institutional setting. This includes gyms,
corporations, work places, clubs, fitness centers and any public or privately entity that has a
machine for use by its members, customers, employees or affiliates.
Damage caused by exceeding maximum user weights as defined in the Product’s Owner’s manual
or warning label.
Damage due to normal usage and wear and tear.
This warranty does not extend to any territories or countries outside the United States and Canada.
State Laws
This warranty gives you specific legal rights. You may also have other rights, which vary from state to
state.
International Purchases
If you purchased your machine outside of the United States consult your local distributor or dealer for
warranty coverage.dealer for warranty coverage.
51
Nautilus®
004-4650.052611.A
Bowflex®
Schwinn® Fitness
Universal®