Download PYLE Audio OTXTM 300 User's Manual
Transcript
Making, Answering, and Hanging Up Calls Quick Tips for Polycom® Open Telepresence Experience™ (OTX™) 300 • From the Start screen, touch Start. To... Do this... Speed dial a video or audio call with the Enhanced UI 1.Touch Speed dial a video or audio call with the Classic UI 1.Touch touch Manually dial a video or audio call with the Enhanced UI See Making Calls Using Meeting Composer on the other side of this card. Manually dial a video or audio call with the Classic UI 1.Touch touch Polycom. 2.Touch the video or audio Speed Dial button that corresponds to the site you want to call. Polycom if you want to call a video site or Audio Dial if you want to call an audio site. 2.Touch the video or audio Speed Dial button that corresponds to the site you want to call. Video Dial if you want to call a video site or Audio Dial if you want to call an audio site. 2.Enter the number of the site you want to call using the touch pad. 3.Touch Dial to call the video site or touch Dial/Answer to call the audio site. • From any other screen, touch Polycom. Controlling Audio • Touch Volume Up or Volume Down to increase or decrease the sound you hear from the far-end site. • Touch Mute to mute or unmute the sound you are sending from your site. Getting Help Make a video or audio call using the calendar (if Polycom Conferencing for Microsoft® Outlook® is enabled) 1.Touch Answer a video or audio call When you receive a call, you will hear a ringing sound. • For video calls, you do not have to do anything; the call will be automatically answered. Calendar. 2.Touch the meeting you want to join from the list that appears on the right side of the screen. 3.Touch 1.If the touch 1.Touch Join Now. • For audio calls, touch Hang up a video or audio call Accessing Home Dial/Answer. Hang Up button is not visible on the screen, Polycom. Help Desk. 2.Touch the larger Help Desk button that appears. Alternatively, if your Touch Panel has an audio Speed Dial button for the Help Desk, you can touch that instead. 2.Do one of the following: www.polycom.com | 1725-09819-001/A • For the Enhanced UI, touch Hang Up on the left side of the screen for video calls or touch Hang Up on the right side of the screen for audio calls. • For the Classic UI, touch Hang Up. Copyright © 2010 Polycom, Inc. Polycom and the Polycom logo are registered trademarks of Polycom, Inc. Making Calls Using Meeting Composer Showing Content When you show content, it automatically appears on the content displays. Depending on how your system is configured, the content displays may automatically lift when content is shared; therefore, be sure to keep the area above the content monitors clear. Also note that, if you are not in a call, content may also appear on the three main display screens. To... To... Do this... Show content with 1.Access the VGA cable in one of the Collaboration Tanks, a laptop which are located between the tabletop content monitors. 2.Connect the VGA cable to the VGA Out connector on your laptop. 3.If required, enable VGA output on your laptop (such as by pressing Shift-F5). Refer to your laptop documentation for more information. 4.Display the content on your laptop screen. 5.Do one of the following: • For the Enhanced UI, touch Content if the laptop is the only content source, or touch Content and then touch Laptop if there is more than one content source. • For the Classic UI, touch Laptop. 6.To stop showing content, do one of the following: Content or touch • For the Enhanced UI, touch Laptop. • For the Classic UI, touch VGA and audio cable. Show content with a document camera With the Enhanced UI, you can use Meeting Composer to easily place calls to multiple sites or to Immersive Telepresence sites, as well as to call traditional video conferencing systems and audio-only sites. Some Meeting Composer features may not be available if your system is not configured to use the Polycom RMX™ or the Polycom CMA™. Laptop or disconnect the 1.Power on the document camera. Select a site using 1. manual dial 2. 3. 4. • For the Classic UI, touch 3.Place your document on the table. 4.To stop showing content, do one of the following: • For the Enhanced UI, touch • For the Classic UI, touch Doc Cam. Doc Cam. Meeting Composer. Select a site using 1. Touch Meeting Composer. speed dial 2. Touch Speed Dial. 3. Touch the Speed Dial button that corresponds to the site that you want to add to the list of sites to call. Select a site using 1. the address book 2. 3. 4. 5. Touch Meeting Composer. Touch Address Book. Touch Local or Global directory. Touch the group to which the site belongs. Touch the name of the site that you want to add to the list of sites to call. Select a site using 1. search 2. 3. 4. 5. Touch Meeting Composer. Touch Search. Touch Local or Global directory. Touch Keyboard. Using the keyboard, enter any string of characters to search for the name of the site. 6. Touch Enter. 7. Touch the name of the site that you want to add to the list of sites to call. Content and then Doc Cam. Touch Touch Number Pad. Touch Video or Audio. Enter the video or phone number, IP address, or E.164 extension. 5. Touch Add. 2.Do one of the following: • For the Enhanced UI, touch touch Doc Cam. Do this... Make a multipoint call or a point-topoint plus call 1. Ensure that the sites listed in the Conference List include all the sites you want to call. For point-to-point plus calls, the Conference List should include no more than one video site plus one audio site. 2. Touch Connect.