Download Lightolier Paraplus PPH1G6FW132 User's Manual
Transcript
Paraplus PPH1G6FW132 or 232 Direct/Indirect 1' x 4' Recessed Fluorescent 6 Cell White Parabolic Louver With Lens Overlay, 1 Lamp or 2 Lamp T8 Page 1 of 2 Features • • • • • • • • • • • • • • • Direct/indirect louver appearance with soft contoured interior. 6 cell flat white louver with lens overlay. Air return models meet UL 1598, Paragraph 12.2.2.3 requirements. 60.2% efficient (2 lamp T8 W lens). 63.6% efficient (2 lamp T8 V lens). Only 4-31/32" deep. Same fixture fits both G and T ceiling types. Fits flush to face of slot grid (T) ceiling. Static, optional. Louver hinges from either side. End of louver gasketed to eliminate light leak. Can be continuous row mounted. Wiring access plate standard. Meets NYC Code requirements. Construction to meet Chicago Plenum requirement is available. Mounting Methods Dimensions Exposed T-bar by others Exposed T-bar by others 1-1/2" max. Acoustical material by others 1-7/8" max. Acoustical material by others 15/16" * 24" 9/16" exposed t-grid ceiling * For flush mounting when using 9/16" Exposed T-Grid ceiling system consult factory 24" exposed slot t-grid ceiling hold-down clips (1 at each end) louver hinges from either side Job Information Type: Job Name: Cat. No.: air return flow Lamp(s): Volts/Ballast: 05/08 For Factory Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 a Philips Group Section 5/Folio M10-12 Rev. A Lightolier is a Philips group brand Paraplus PPH1G6FW132 or 232 Direct/Indirect 1' x 4' Recessed Fluorescent 6 Cell White Parabolic Louver With Lens Overlay, 1 Lamp or 2 Lamp T8 Page 2 of 2 Model No. PPH1G6FW232UNVHI Model No. PPH1G6FV232UNVHI LER = FP - 46.6 IW - 64.1 BF - 0.87 Comparative yearly lighting energy cost per 1000 lumens = $5.15 LER = FP - 56.1 IW - 56.9 BF - 0.88 Comparative yearly lighting energy cost per 1000 lumens = $4.28 CANDELA DISTRIBUTION Report Number: G01076 Catalog Number: PPH1G6FW232120SO Lamps: (2) F32/T8 Luminaire: Paraplus with white painted interior, white painted 6 cell parabolic louver with .140 prismatic overlay Ballast: Howard Industries E3-32/120 Report is based on 2850 Lumens per lamp. Efficiency: 60.2% CIE Type-Direct-Indirect Plane: 0-Deg 90-Deg Spacing Criteria: 1.2 1.1 Shielding Angles: 90 90 Plane: 0-Deg 90-Deg Luminous Length: 46.920 10.920 COEFFICIENTS OF UTILIZATION – ZONAL CAVITY METHOD. EFFECTIVE FLOOR CAVITY REFLECTANCE 0.200 RC 80 50 30 RW 70 50 30 50 30 10 50 30 01 66 64 62 60 59 57 58 57 02 61 57 54 54 51 49 52 50 03 57 51 47 48 45 42 47 44 04 52 46 41 44 40 37 42 39 05 49 42 37 40 36 33 39 35 06 45 38 33 36 32 29 35 32 07 42 35 30 33 29 26 32 29 08 39 32 27 31 27 24 30 26 09 37 29 25 28 24 21 28 24 10 35 27 23 26 22 20 26 22 0.0 45.0 90.0 0 1701 1701 1701 FLUX 5 1673 1686 1699 160 15 1583 1583 1583 447 25 1444 1393 1376 646 35 1235 1154 1146 734 45 920 829 726 631 55 550 419 356 404 65 347 220 198 251 75 183 106 91 125 85 36 27 25 32 90 0 0 0 Report Number: G2007095 Catalog Number: PPH1G6FV232UNVHI Lamps: (2) F32/T8 Luminaire: Paraplus with white painted interior, white painted 6 cell parabolic louver with .095 prismatic overlay. Ballast: B232IUNVHP-B (Triad) Report is based on 2850 Lumens per lamp. Efficiency: 63.6% CIE Type-Direct-Indirect Plane: 0-Deg 90-Deg Spacing Criteria: 1.2 1.1 Shielding Angles: 90 90 Plane: 0-Deg 90-Deg Luminous Length: 47.040 11.040 ZONAL LUMEN SUMMARY ZONE 00-030 00-040 00-060 00-090 90-180 00-180 10 55 48 41 36 32 29 26 23 21 20 LUMENS % LAMP 1253 22.0 1987 34.9 3021 53.0 3429 60.2 0000 0.0 3429 60.2 CANDELA DISTRIBUTION COEFFICIENTS OF UTILIZATION – ZONAL CAVITY METHOD. EFFECTIVE FLOOR CAVITY REFLECTANCE 0.200 RC 80 50 30 RW 70 50 30 50 30 10 50 30 01 70 67 65 63 61 60 61 59 02 64 59 55 56 53 50 54 51 03 59 53 48 50 46 43 48 45 04 54 47 42 45 41 37 43 40 05 50 42 37 40 36 33 39 35 06 46 38 33 37 32 29 36 32 07 43 35 30 34 29 26 33 29 08 40 32 27 31 26 23 30 26 09 38 30 25 28 24 21 28 24 10 35 27 22 26 22 19 26 24 % FIXT 36.5 57.9 88.1 100.0 000.0 100.0 LUMINANCE DATA IN CANDELA/SQ. METER AVERAGE AVERAGE AVERAGE AVERAGE IN DEG. 0-DEG. 45-DEG. 90-DEG. 45 3935. 3545. 3105. 55 2900. 2209. 1877. 65 2483. 1574. 1417. 75 02138. 1239. 1063. 85 01249. 937. 867. 0.0 45.0 90.0 0 1612 1612 1612 FLUX 5 1582 1600 1613 152 15 1488 1511 1526 426 25 1341 1348 1340 620 35 1155 1119 1065 697 45 939 843 790 660 55 709 573 540 534 65 464 330 275 343 75 218 134 119 158 85 40 31 29 36 90 4 3 3 ZONAL LUMEN SUMMARY ZONE 00-030 00-040 00-060 00-090 90-180 00-180 10 58 49 42 37 32 29 26 23 21 19 LUMENS % LAMP 1197 21.0 1894 33.2 3088 54.2 3625 63.6 0000 00.0 3625 63.6 % FIXT 33.0 52.2 85.2 100.0 000.0 100.0 LUMINANCE DATA IN CANDELA/SQ. METER AVERAGE AVERAGE AVERAGE AVERAGE IN DEG. 0-DEG. 45-DEG. 90-DEG. 45 3962. 3557. 3333. 55 3688. 2981. 2809. 65 3276. 2330. 1941. 75 2513. 1545. 1372. 85 1369. 1061. 993. Ordering Information Explanation of Catalog Number. Example: PPH1G6FW232UNVHI Paraplus PP PN Body Style: H = Air Return S = Static 1 G Fixture Width Ceiling Type: Fits both Standard Grid and Slot Grid F 6 Number of Cells: 1 row of 6 cells Flat White Louver and Body Standard Paraplus For NYC Code – Local 3 Manufactured - 32 Lens Overlay: M = Matte White Acrylic .040 Thick W = Pattern 20 Prismatic .140 Thick O = K20 with White Overlay V = .095 Pattern 12 Lamp Quantity 1=1 Lamp 2=2 Lamp Lamp: (By Others) 32=T8 (Nominal 48") Voltage: 120, 277 or UNV=120-277 Options: Add appropriate suffix to catalog no., ie: (GLR) Ballast Type: < 20THD SO * PS * 1 or 2 Lamp Elec. T8 LOL Dimming T8 < 10THD HI * – *Instant Start Standard Other dimming options. Consult factory. NOTE: For T8 UNV, you must use HI Ballast Code. Options/Accessories Specifications (continued) Fusing: Internal fast blow fusing: SUFFIX: GLR. Internal slow blow fusing: SUFFIX: GMF. Drywall Kit: Order Catalog Number: FK91X4. Electrical Wiring Options: Consult factory. Chicago Plenum: SUFFIX: C. Overlay: M=Matte white acrylic .040 thick. W=Pattern 20 prismatic .140 thick. O=K20 with white overlay. V=.095 acrylic pattern 12. Electrical: Thermally protected class “P’ ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°. UL Listed for damp locations. Labels: I.B.E.W./UL and ULc Listed. This product may have a mercury containing lamp. Manage in accord with Disposal Laws. See: www.lamprecycle.org Specifications Performance: In an installation of 2 lamp 32W luminaires in a room cavity ratio of 1, with reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .67. To reduce glare the average brightness at 65° shall not exceed 1941 candelas per square meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 63.5%. Materials: Chassis parts are die-formed 20 gauge steel. Housing has all edges turned for safe-handling. Finish: Chassis exterior – baked white powder coated polyester enamel. Cavity – baked white powder coated polyester enamel. Louver – baked white powder coated polyester enamel, minimum 86% reflectance. Rust preventative undercoating. Lightolier is a Philips group brand Job Information Type: For Factory Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 a Philips Group Section 5/Folio M10-12 Rev. A