Download Lightolier PA1A7050 User's Manual
Transcript
PA1A7050 Calculite® ProSpec® Linear Downlight Page 1 of 2 1 Light AR 70 Series A Top View 10 8 13 1/8" 10 3/8" L X 10" W 9 11 6 5 8" 13" 17" 8 3/4" Depth 5" 7 14 4 1 3/4" 1 12, 13 2 3 Flanged 5" L X 5" W Opening Trimless Ceiling Cutout: 6 3/16" L x 6 3/16" W PA1A705EBL = (Flanged) Black/White PA1A705EWL = (Flanged) White PA1A705EBTL = (Trimless) Black PA1A705EWTL = (Trimless) White Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage Ordering Information: AR 70 Series A Cat. No. Lamp Ceiling Trim Aperture Finish PA1A705EBL PA1A705EWL PA1A7053EBTL PA1A705EWTL (1) 50W AR 70 (1) 50W AR 70 (1) 50W AR 70 (1) 50W AR 70 Overlap Overlap Trimless Trimless Black with White Flange White with White Flange Black White Features Options & Accessories 1. Aperture Frame: Provides clean support for lamp holders and overlapping flange or trimless installation. Extruded aluminum. Rigidly welded together on all corners. 2. Media Cartridge: Allows convenient loading and removal of up to two accessories (including lamp cover glass; lamp cover glass may be replaced with solid glass accessory). Easily installed and removed for lamping with a simple twisting motion. Constructed of diecast aluminum. 3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional shielding and can be easily removed. 4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on diagonal) vertical adjustment. 5. Tortiontite Spring: For easy installation of aperture frame. 6. Housing: Die formed 22 ga. steel. Finish: Black. 7. Mounting Brackets: Adjustable vertically from outside of housing. 8. Thermal Protector: Meets NEC, UL , and CSA requirements. 9. Lampholder: double contact bayonet base with 250°C #18 gauge Teflon® leads. 10. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from below. 11. Lamp and Accessory Support: .032" steel, flared for easy entry of Media Cartridge. 12. Lens Retaining Ring: .093" spring steel rod. Holds accessories in place. 13. Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement. 14. Transformer Housing: Die formed 18 ga. steel. Accessories: 2 1/2" dia. series, filters, lenses, screens and louvers. (2) accessories maximum, including lamp cover glass. Lamp guard glass may be replaced with solid glass accessory. Electrical Electronic Transformers: Offer reliable operation and are accessible frombelow for servicing. 12V Secondary. Labels UL/cUL (Suitable for Damp Location), I.B.E.W. Teflon® is a registered trademark of E.I. DuPont. US Patent Pending Job Information Job Name: Type: Cat. No.: Lamp(s): Notes: Dimming Controls: Use only dimmers specifically designed for use with electronic transformers. Low Voltage fixtures may produce audible sound when used with dimmers, which may be objectionable in acoustically critical areas. Finish All painted finishes are powder coated baked enamel. Lightolier a Genlyte Company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2005 Genlyte Group LLC • B1105 PA1A7050 Calculite® ProSpec® Linear Downlight Page 2 of 2 1 Light AR 70 Series A Lighting Performance Data Aiming Angle: L Beam length B Beam width C Distance to center of beam D Distance A Aiming angle FC Foot candles 0° 30° 45° or 60° Horizontal 30° 45° or 60° Vertical 60° Lamp data shown is typical, and is based on bare lamp photometrics. Contact lamp manufacturers for availability and performance. Lamp 0° Aiming Angle Lamps 50W AR70 SP (T-H) 50W AR70 FL (T-H) 50W AR70 SP GOLD (T-H) 50W AR70 FL GOLD (T-H) 50W AR111 NSP (T-H) 50W AR111 FL (T-H) Beam Spread (To 50% CBCP) Rated Life (Hrs.) D FC L 15000 2000 8’ 12’ 16’ 20’ 234 104 59 38 1.4’ 2.1’ 2.8’ 3.5’ 2000 2000 4’ 6’ 8’ 10’ 125 56 31 20 13500 2000 8’ 12’ 16’ 20’ 1800 2000 50000 3000 CBCP 45° Aiming Angle W C FC L W D 1.4’ 2.1’ 2.8’ 3.5’ 7’ 10’ 13’ 16’ 4.0’ 5.8’ 7.5’ 9.2’ 199 97 58 38 1.6’ 2.3’ 3.0’ 3.7’ 1.4’ 2.0’ 2.6’ 3.2’ 2.1’ 3.2’ 4.3’ 5.4’ 2.1’’ 3.2’ 4.3’ 5.4’ 3’ 5’ 7’ 9’ 1.7’ 2.9’ 4.0’ 5.2’ 144 52 27 16 2.2’ 3.7’ 5.1’ 6.6’ 211 94 53 34 1.4’ 2.1’ 2.8’ 3.5’ 1.4’ 2.1’ 2.8’ 3.5’ 7’ 10’ 13’ 16’ 4.0’ 5.8’ 7.5’ 9.2’ 199 97 58 38 4’ 6’ 8’ 10’ 125 56 31 20 2.1’ 3.2’ 4.3’ 5.4’ 2.1’’ 3.2’ 4.3’ 5.4’ 3’ 5’ 7’ 9’ 1.7’ 2.9’ 4.0’ 5.2’ 2000 15’ 20’ 25’ 30’ 222 125 80 56 1.3’ 1.7’ 2.2’ 2.6’ 1.3’ 1.7’ 2.2’ 2.6’ 2000 6’ 8’ 10’ 12’ 83 47 30 21 3.2’ 4.3’ 5.4’ 6.4’ 3.2’ 4.3’ 5.4’ 6.4’ 10° 30° 10° 30° 5° 30° 30° Aiming Angle D 60° Aiming Angle FC L W D C FC L W 5’ 5.0’ 7’ 7.0’ 9’ 9.0’ 11’ 11.0’ 212 108 65 44 1.8’ 2.5’ 3.2’ 3.9’ 1.2’ 1.7’ 2.2’ 2.7’ 3’ 4’ 5’ 6’ 5.2’ 6.9’ 8.7’ 10.4’ 208 117 75 52 2.1’ 2.9’ 3.6’ 4.3’ 1.0’ 1.4’ 1.7’ 2.1’ 1.9’ 3.1’ 4.3’ 5.6’ 3’ 4’ 5’ 6’ 3.0’ 4.0’ 5.0’ 6.0’ 79 44 28 20 3.5’ 4.6’ 5.8’ 6.9’ 2.3’ 3.0’ 3.8’ 4.5’ 1’ 2’ 3’ 4’ 1.7’ 3.5’ 5.2’ 6.9’ 250 63 28 16 2.7’ 5.5’ 8.2’ 10.9’ 1.1’ 2.1’ 3.2’ 4.3’ 1.6’ 2.3’ 3.0’ 3.7’ 1.4’ 2.0’ 2.6’ 3.2’ 5’ 5.0’ 7’ 7.0’ 9’ 9.0’ 11’ 11.0’ 191 97 59 39 1.8’ 2.5’ 3.2’ 3.9’ 1.2’ 1.7’ 2.2’ 2.7’ 3’ 4’ 5’ 6’ 5.2’ 6.9’ 8.7’ 10.4’ 188 105 68 47 2.1’ 2.9’ 3.6’ 4.3’ 1.0’ 1.4’ 1.7’ 2.1’ 144 52 27 16 2.2’ 3.7’ 5.1’ 6.6’ 1.9’ 3.1’ 4.3’ 5.6’ 3’ 4’ 5’ 6’ 3.0’ 4.0’ 5.0’ 6.0’ 71 40 25 18 3.5’ 4.6’ 5.8’ 6.9’ 2.3’ 3.0’ 3.8’ 4.5’ 1’ 2’ 3’ 4’ 1.7’ 3.5’ 5.2’ 6.9’ 225 56 25 14 2.7’ 5.5’ 8.2’ 10.9’ 1.1’ 2.1’ 3.2’ 4.3’ 10’ 5.8’ 15’ 8.7’ 20’ 11.5’ 25’ 14.4’ 325 144 81 52 1.2’ 1.7’ 2.3’ 2.9’ 1.0’ 1.5’ 2.0’ 2.5’ 8’ 8.0’ 12’ 12.0’ 16’ 16.0’ 20’ 20.0’ 276 123 69 44 1.4’ 2.1’ 2.8’ 3.5’ 1.0’ 1.5’ 2.0’ 2.5’ 5’ 8.7’ 8’ 13.9’ 11’ 19.1’ 14’ 24.2’ 250 98 52 32 1.8’ 2.6’ 3.9’ 4.9’ 0.9’ 1.4’ 1.9’ 2.4’ 5’ 7’ 9’ 11’ 78 40 24 16 3.7’ 5.1’ 6.6’ 8.1’ 3.1’ 4.3’ 5.6’ 6.6’ 3’ 5’ 7’ 9’ 118 42 22 13 3.5’ 5.8’ 8.1’ 10.4’ 2.3’ 3.6’ 5.3’ 6.8’ 2’ 3’ 4’ 5’ 94 42 23 15 5.5’ 8.2’ 10.9’ 13.7’ 2.1’ 3.2’ 4.3’ 5.4’ 2.9’ 4.0’ 5.2’ 6.4’ C 3.0’ 5.0’ 7.0’ 9.0’ 3.5’ 5.2’ 6.9’ 8.7’ Data are based on bare lamp photometrics. Dashed lines in beam spreads indicate narrow axes of oval shaped beams. FC is initial footcandles at center of beam. L and W are to the point that the candlepower drops 50% of maximum. Job Information Lightolier a Genlyte Company Type: www.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2005 Genlyte Group LLC • B1105