Download Dell OpenManage Server Administrator Version 6.0.1 CIM Reference Guide
Transcript
Dell™ OpenManage™ Server Administrator CIM Reference Guide w w w. d e l l . c o m | s u p p o r t . d e l l . c o m Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. ____________________ Information in this document is subject to change without notice. © 2009 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, OpenManage are trademarks of Dell Inc.; Microsoft and Windows NT are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; Intel, Pentium, Xeon, Itanium, i860, i960, and Celeron are registered trademarks and MMX, i386, i486, SpeedStep, and Core are trademarks of Intel Corporation in the United States and/or other countries; AMD, AMD Athlon, AMD Duron, AMD-K5, AMD-K6, Opteron, and Turion are trademarks and AMD-K6 -2 and AMD-K6 -III are registered trademarks of Advanced Micro Devices, Inc in the United States and/or other countries; Crusoe and Efficeon are trademarks of Transmeta Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. January 2009 Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . . . . . . . . . . . . 9 Server Administrator Documenting CIM Classes and Their Properties . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . 11 . . . . . . . 11 . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . 12 . . . . . . . . . . . . 14 Typographical Conventions . . . . . . . . . . . . . . . 15 CIM_PhysicalElement . . . . . . . . . . . . . . . 17 . . . . . . . . . . . . . . . . . . 17 . . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . . . . 20 CIM_Chassis . . . . . . . . . . . . . . . . . . . . . . 21 DELL_Chassis . . . . . . . . . . . . . . . . . . . . . . 22 . . . . . . . . . . . . . . . . 24 . . . . . . . . . . . . . . . . . . . . . . . . 24 Base Classes Parent Classes Classes That Describe Relationships Dell-Defined Classes Common Properties of Classes Other Documents You May Need 2 CIM_PhysicalElement CIM_PhysicalPackage CIM_PhysicalFrame CIM_PhysicalComponent CIM_Chip Contents 3 CIM_PhysicalMemory . . . . . . . . . . . . . . . . . . CIM_PhysicalConnector . CIM_Slot 3 . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . 31 CIM_LogicalElement . . . . . . . . . . . . . . . . 35 . . . . . . . . . . . . . . . . . . 36 . . . . . . . . . . . . . . . . . . . . . . . 37 . . . . . . . . . . . . . . . . . . 38 . . . . . . . . . . . . . . . . . . . . . . 38 . . . . . . . . . . . . . . . . . . . 39 . . . . . . . . . . . . . . . . . . . . . . . . . 40 CIM_LogicalElement CIM_System CIM_ComputerSystem DELL_System . CIM_LogicalDevice CIM_FRU CIM_LogicalPort . . . . . . . . . . . . . . . . . . . . . 41 CIM_NetworkPort . . . . . . . . . . . . . . . . . . . . 42 . . . . . . . . . 43 . . . . . . . . . . . . . . . . . . . 44 . . . . . . . . . . . . . . . . . . . . . . . 47 CIM_DiscreteSensor . . . . . . . . . . . . . . . . . . 49 CIM_NumericSensor . . . . . . . . . . . . . . . . . . 49 . . . . . . . . . . . . . . . . 52 CIM_CurrentSensor . . . . . . . . . . . . . . . . . . . 53 CIM_VoltageSensor . . . . . . . . . . . . . . . . . . . 54 . . . . . . . . . . . . . . . . . . . . 55 DELL_ManagedSystemServicesDevice DELL_NetworkPort CIM_Sensor CIM_TemperatureSensor CIM_Tachometer 4 Contents 26 . . . . . . . . . . . . . . . . . . . . . 56 . . . . . . . . . . . . . . . . . . . 57 . . . . . . . . . . . . . . . . . . . . . . . . . 58 . . . . . . . . . . . . . . . . . . . . 59 . . . . . . . . . . . . . . . . . . 59 . . . . . . . . . . . . . . . . . . . . . 61 . . . . . . . . . . . . . . . . . . . 62 . . . . . . . . . . . . . . . . . . . . . 64 . . . . . . . . . . . . . . . . . 65 . . . . . . . . . . . . . . . . . . 66 . . . . . . . . . . . . . . . . . . . 67 CIM_PCIDevice . . . . . . . . . . . . . . . . . . . . . 68 CIM_PCIBridge . . . . . . . . . . . . . . . . . . . . . 69 CIM_Processor . . . . . . . . . . . . . . . . . . . . . 70 . . . . . . . . . . . . . . . . . . . 79 . . . . . . . . . . . . . . . . . . . . . . 79 . . . . . . . . . . . . . . . . . . . 80 . . . . . . . . . . . . . . . . . 82 . . . . . . . . . . . . . . . . . . . 84 CIM_WatchDog CIM_CoolingDevice CIM_Fan CIM_UserDevice CIM_PointingDevice CIM_Keyboard . CIM_PowerSupply CIM_Controller CIM_ParallelController CIM_SerialController CIM_PCIController CIM_StorageExtent CIM_Memory CIM_CacheMemory CIM_SoftwareElement CIM_BIOSElement . CIM_SoftwareFeature . . . . . . . . . . . . . . . . . . 85 DELL_SoftwareFeature . . . . . . . . . . . . . . . . . 86 Contents 5 . . . . . . . . . . . . . . . . . . 86 . . . . . . . . . . . . . . . . . . . . . . . . . 87 . . . . . . . . . . . . . . . . . 89 . . . . . . . . . . . . . . . . . . . . . . . . 90 . . . . . . . . . . . . . . . . . 91 . . . . . . . . . . . . . . . . 92 . . . . . . . . . . . . . . . 93 . . . . . . . . . . . . . . 94 . . . . . . . . . . 94 . . . . . . . . . . . . . . . . 95 CIM_SystemResource CIM_IRQ CIM_MemoryMappedIO CIM_DMA CIM_RedundancyGroup CIM_ExtraCapacityGroup DELL_PSRedundancyGroup DELL_FanRedundancyGroup CIM_EnabledLogicalElement Group CIM_ServiceAccessPoint CIM_RemoteServiceAccessPoint . . . . . . . . . . . . 95 . . . . . . . . . . . . 97 . . . . . . . . . . . . . . . 99 DELL_EsmLog . . . . . . . . . . . . . . . . . . . . . . 99 DELL_PostLog . . . . . . . . . . . . . . . . . . . . . . 100 . . . . . . . . . . . . . . . . . . 100 . . . . . . . . . . . . . . . . . . . . . 101 . . . . . . . . . . . . . . 102 . . . . . . . . . . . . . . . . . . . 103 . . . . . . . . . . . . . . . . . . . . . . . 103 . . . . . . . . . . . . . . . . . . 104 DELL_RemoteServiceAccessPort 4 Dell-Defined Classes . DELL_CMApplication DELL_CMDevice DELL_CMDeviceApplication DELL_CMInventory DELL_CMOS DELL_CMProductInfo 6 Contents DELL_BIOSExtensions . . . . . . . . . . . . . . . . . Management Object File For Change Management . . . . . . . . . . . . . . . . . . 106 . . . . . . . . . . . . 111 Classes for Power Management 5 CIM_Dependency DELL_FanSensor . 105 . . . . . . . . . . . . . . . . . 127 . . . . . . . . . . . . . . . . . . . . 128 . . . . . . . . . . . . . . . 128 . . . . . . . . . . . . . . . . 129 . . . . . . . . . . . . . . 130 . . . . . . . . . . . . . . . . 130 . . . . . . . . . . . 131 . . . . . . . . . . . . . 132 . . . . . . . . . . . . . . . . . . 132 CIM_PackageTempSensor CIM_PackageVoltSensor CIM_PackageCurrentSensor CIM_PackageFanSensor CIM_PackagePowerSupplySensor DELL_PackagePSRedundancy DELL_PSRedundancy Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Contents 7 8 Contents Introduction This reference guide documents the Dell™ OpenManage™ Server Administrator Common Information Model (CIM) provider contained in the Management Object File (MOF) dccim32.mof. CIM provides a conceptual model for describing manageable objects in a systems management environment. CIM is a modeling tool rather than a programming language. CIM provides the structure for organizing objects into a model of a managed environment. For modeling a managed environment, CIM makes available a set of abstract and concrete classes of objects. These classes model the basic characteristics of systems, networks, and applications, as well as groupings of management-related data. For more information about CIM, see the Distributed Management Task Force (DMTF) website at www.dmtf.org and the Microsoft® website at www.microsoft.com. Server Administrator Server Administrator 1.0 or later provides a suite of systems management information for keeping track of your networked systems. In addition to providing systems management agents that are independent of the management console, Server Administrator supports these systems management standards: CIM and Simple Network Management Protocol (SNMP). In addition to supporting systems management industry standards, Server Administrator provides additional systems management information about the specific components of your Dell™ system. What’s New in this Release The following changes have been made for this release: • Added two new properties — ChassisSystemProperties and ChassisSystemRevision to the DELL_Chassis class. • Added a new value to the MemoryType property of the CIM_PhysicalMemory class. Introduction 9 • Added a new property — SystemSlotType to the CIM_Slot class. • Added new values for the UpgradeMethod and Family properties of the CIM_Processor class. • Added a new property — RemoteAccessType to the DELL_RemoteServiceAccessPortGroup class. • Added the new class DELL_ManagedSystemServicesDevice to the base class CIM_LogicalDevice. Documenting CIM Classes and Their Properties The Dell CIM provider extends support to Dell-specific software and hardware components. The Dell MOF defines the classes for the Dell CIM provider. All of the supported classes and properties in the MOF are documented in this guide. The following subsections define some of the basic building blocks of CIM classes that are used in describing the dccim32 provider name. These subsections also explain how the elements used in describing these classes are organized. This section does not document the entire CIM schema, but only those classes and properties supported by the dccim32 provider. The list of properties for each supported class varies greatly. Base Classes The classes listed in the Server Administrator CIM provider class hierarchy do not have a parent property. These base classes do not derive from another class. The base classes are: 10 • CIM_ManagedSystemElement • CIM_Dependency • DELL_Esm Log • DELL_PostLog • DELL_CMApplication • DELL_CMDevice • DELL_CMDeviceApplications Introduction • DELL_CMInventory • DELL_CMOS • DELL_CMProductInfo The CIM_ManagedSystemElement class is the base class for the system element hierarchy from which all other CIM classes are derived. As a result, CIM_ManagedSystemElement has no parent. Examples of managed system elements include software components such as files, devices such as hard drives and controllers, and physical subcomponents of devices such as chip sets and cards. For the CIM_ManagedSystemElement properties, see Caption, CreationClassName, Description, Name, and Status in Table 1-1 The Dell-defined classes are not defined in the official schema by the DMTF, the industry group that defines the standards for CIM, and hence do not have parent classes. CIM_Dependency does not have a parent class because it is a relationship or association between two managed system elements. Parent Classes Most classes in the dccim32 provider document both a Class Name and a Parent Class property. The parent class is the class from which any given class inherits its core properties. For example, the CIM_Controller class has the CIM_LogicalDevice class as its parent, and has various types of controllers (CIM_ParallelController, CIM_SerialController) as its children. Classes That Describe Relationships Classes that derive from CIM_Dependency have CIM_Dependency as their parent class, but they are documented in terms of antecedent and dependent elements in a relationship rather than in terms of common properties. Consider the following relationship between two CIM_ManagedSystemElements: Antecedent CIM_PackageCurrentSensor Dependent CIM_PhysicalPackage The CIM_PackageCurrentSensor monitors an entire physical package, such as all the components contained in a given system chassis. The CIM_PhysicalPackage is dependent on the CIM_PackageCurrentSensor for this monitoring function. Introduction 11 Dell-Defined Classes Server Administrator has extended some CIM classes and has created new classes to assist in managing systems and their components. In the diagrams that appear in the documentation for each class, those classes created and populated by Dell are designated by the gold (lighter gray) triangle icon. Common Properties of Classes Many classes have properties such as Caption, Description, and CreationClassName. Table 1-1 defines properties that have the same meaning in every class that has this property and are defined more than once in this guide. Table 1-1. Common Properties of Classes Property Description Data Type Caption Describes the object using a short textual description (one-line string). string CreationClassName Indicates the name of the class or the string subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and its subclasses to be uniquely identified. CSCreationClassName Indicates the computer system’s creation class name. string CSName Indicates the computer system’s name. string CurrentReading Indicates the actual current value indicated by the sensor in amperes. sint32 Description Provides a textual description of the object. string LowerThresholdNonCritical If current reading is between lower threshold sint32 noncritical and upper threshold noncritical, the current state is normal. See Figure 3-2. LowerThresholdCritical 12 Introduction If the current reading is between upper threshold critical and upper threshold fatal, the current state is critical. See Figure 3-2. sint32 Table 1-1. Common Properties of Classes (continued) Property Description Data Type IsLinear Indicates that the sensor is linear over its dynamic range. Boolean Manufacturer Provides the name of the organization string responsible for producing the CIM_PhysicalElement or CIM_SoftwareElement. This may be the entity from whom the element is purchased, but not necessarily. Purchase information is contained in the Vendor property of CIM_Product. Name Defines the label by which the object is string known. When subclassed, the Name property can be overridden to be a Key property. Status Provides a string indicating the status of the component. Status values include: string Operational Status Values: OK indicates that the object is functioning normally. Degraded means that the item is functioning, but not optimally. Stressed indicates that the element is functioning, but needs attention. Examples of Stressed states are overloaded, overheated, and so on. Nonoperational Status Values: Non-recover means that a nonrecoverable error has occurred. Error means that an element has encountered an operational condition that is severe as compared to its normal mode of operation. Introduction 13 Table 1-1. Common Properties of Classes (continued) Property Description SystemCreationClassName Indicates the system’s creation class name. Data Type string UnitModifier Provides the unit multiplier for the values sint32 returned by this sensor. All the values returned by this sensor are represented in units of 10 raised to the power of the unit modifier. If the unit modifier is –6, then the units of the values returned are microvolts. The units apply to all numeric properties of the sensor, unless explicitly overridden by the units’ qualifier. UpperThresholdCritical If the current reading is between upper threshold critical and upper threshold fatal, the current status is critical. See Figure 3-2. sint32 UpperThresholdNonCritical If the current reading is between lower threshold noncritical and lower threshold critical, the current status is noncritical. See Figure 3-2. sint32 Version string Version should be in the form <major>.<minor>.<revision> or <major>.<minor><letter><revision>; for example, 1.2.3 or 1.2a3. Other Documents You May Need Besides this Dell OpenManage Server Administrator CIM Reference Guide, you can find the following guides either on the Dell Support website at support.dell.com or on the Dell Systems Management Tools and Documentation DVD: 14 • Dell OpenManage Server Administrator Online Help is context-sensitive help that you can access while running Server Administrator. Help screens provide step-by-step instructions on how to perform systems management tasks using Server Administrator. • Dell OpenManage Server Administrator User’s Guide documents the features, installation, and uninstallation of Server Administrator. Introduction • Dell OpenManage Installation and Security User’s Guide provides complete information on installation procedures and step-by-step instructions for installing, upgrading, and uninstalling Server Administrator for each operating system. • Dell OpenManage Server Administrator Command Line Interface User’s Guide explains how to perform tasks using the text-based command line interface. • Dell OpenManage Server Administrator Messages Reference Guide lists the messages that you can receive on your systems management console or on your operating system’s event viewer. This guide explains the text, severity, and cause of each message that the Server Administrator issues. • Dell OpenManage Server Administrator SNMP Reference Guide documents the SNMP management information base (MIB). The SNMP MIB defines variables that cover the capabilities of Server Administrator systems management agents. Typographical Conventions The following example shows how most of the classes in the Dell CIM provider are documented. Table 1-2 shows a partial class description for the DELL_DMA class. (For a full class description, see Table 3-42) Class Name appears in Courier typeface and provides the string that names the class in the MOF. Parent Class appears in Courier typeface and provides the name of the class from which the present class is derived. Property denotes the name of the attribute that is being defined for this class. Description includes text that defines the property. Data Type stipulates the format that the values of this property must take. Common data types include Boolean, string, and various types of integer. Boolean indicates that the property must be expressed as one of two alternatives. Introduction 15 Table 1-2. CIM_DMA Properties Class Name: CIM_DMA Parent Class: CIM_SystemResource Property Description Data Type DMAChannel A part of the object’s key value, the DMA channel number. uint32 Availability uint16 Availability of the DMA. Availability values are defined as follows: 1 - Other 2 - Unknown 3 - Available 4 - In Use/Not Available 5 - In Use and Available/Shareable 16 Introduction CIM_PhysicalElement CIM_PhysicalElement is a CIM-defined class. The CIM_PhysicalElement class contains the subclasses shown in Figure 2-1. Figure 2-1. CIM_PhysicalElement Class Structure CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalPackage CIM_PhysicalFrame CIM_Chassis DELL_Chassis CIM_PhysicalComponent CIM_Chip CIM_PhysicalMemory CIM_PhysicalConnector CIM_Slot CIM_PhysicalElement CIM_ManagedSystemElement CIM_PhysicalElement Subclasses of the CIM_PhysicalElement class listed in Table 2-1 define any component of a system that has a distinct physical identity. Physical elements are tangible managed system elements (usually actual hardware items) that have a physical manifestation of some sort. By contrast, processes, files, and logical devices are not classified as physical elements. A managed system element is not necessarily a discrete component. A single card (which is a type of physical element) can host more than one logical device. One card, for example, could implement both a modem and a local area network (LAN) adapter. In this case, the card would be represented by a single physical element associated with multiple logical devices. CIM_PhysicalElement 17 Table 2-1. CIM_PhysicalElement Properties Class Name: CIM_PhysicalElement Parent Class: CIM_ManagedSystemElement Property Description Data Type CreationClass See Table 1-1. Name Manufacturer See Table 1-1. Model The name by which the physical element is generally known. string SerialNumber A manufacturer-allocated number used to identify string the physical element. Tag 18 Uniquely identifies the physical element and serves string as the element’s key. The Tag property can contain information such as asset tag or serial number data. The key for physical element is placed very high in the object hierarchy in order to identify the hardware/entity independently, regardless of physical placement in or on cabinets, adapters, and so on. For example, a hot-swappable or removable component can be taken from its containing (scoping) package and temporarily unused. The object still continues to exist and may even be inserted into a different scoping container. Therefore, the key for physical element is an arbitrary string that is defined independently of any placement or location-oriented hierarchy. CIM_PhysicalElement CIM_PhysicalPackage CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalPackage The CIM_PhysicalPackage class listed in Table 2-2 represents physical elements that contain or host other components. Examples are a rack enclosure or an adapter card with multiple functions. Table 2-2. CIM_PhysicalPackage Properties Class Name: CIM_PhysicalPackage Parent Class: CIM_PhysicalElement Property Description Data Type Removable A CIM_PhysicalPackage is removable if it is designed to be taken in and out of the physical container in which it is normally found without impairing the function of the overall package. Boolean Replaceable A CIM_PhysicalPackage is replaceable if it is Boolean possible to substitute a physically different element for the original element, as in a field replaceable unit (FRU). For example, some computer systems allow the microprocessor to be upgraded to one of a higher clock rating. In this case, the microprocessor is said to be replaceable. CIM_PhysicalElement 19 CIM_PhysicalFrame CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalPackage CIM_PhysicalFrame The CIM_PhysicalFrame class described in Table 2-3 contains other frame enclosures such as racks and chassis. Properties like VisibleAlarm or AudibleAlarm, and data related to security breaches are also members of this class. Table 2-3. CIM_Physical Frame Properties Class Name: CIM_PhysicalFrame Parent Class: CIM_PhysicalPackage Property Description Data Type LockPresent Indicates whether the frame is protected with a lock. Boolean AudibleAlarm Indicates whether the frame is equipped with an audible alarm. Boolean VisibleAlarm Indicates that the equipment includes a visible alarm. Boolean SecurityBreach An enumerated, integer-valued property uint16 indicating that a physical breach of the frame is in progress. Values for the SecurityBreach property are: 1 - Other 2 - Unknown 3 - No breach 4 - Breach attempted 5 - Breach successful IsLocked 20 Indicates that the frame is currently locked. CIM_PhysicalElement Boolean CIM_Chassis CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalPackage CIM_PhysicalFrame CIM_Chassis The CIM_Chassis class described in Table 2-4 represents the physical elements that enclose physical elements such as power supplies, fans, and processors. Table 2-4. CIM_Chassis Parent Properties Class Name: CIM_Chassis Parent Class: CIM_PhysicalFrame Property Description Data Type ChassisTypes Values for the ChassisTypes property are: uint16 1 - Other 2 - Unknown 3 - Mini-tower 4 - Tower 5 - Space-saving 6 - Main system chassis 7 - Expansion chassis 8 - Subchassis 9 - Space-saving 10 - Main system chassis 11 - Expansion chassis 12 - Subchassis 13 - Bus expansion chassis 14 - Peripheral chassis 15 - Storage chassis 16 - Rack-mount chassis CIM_PhysicalElement 21 DELL_Chassis CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalPackage CIM_PhysicalFrame CIM_Chassis DELL_Chassis The DELL_Chassis class explained in Table 2-5 defines the identifying and status properties of the chassis. DELL_Chassis inherits from CIM-defined classes, but is populated by Dell™ properties. Table 2-5. DELL_Chassis Properties Class Name: DELL_Chassis Parent Class: CIM_Chassis Property Description Data Type AssetTag Indicates the container AssetTag string. This asset tag string is writable by the system administrator. string SystemClass Refers to the system type that is installed and running the instrumentation. Values for the SystemClass property are: uint16 1 - Other 2 - Unknown 3 - Workstation 4 - Server 5 - Desktop 6 - Portable 7 - Net PC SystemID 22 Indicates the system identifier code. CIM_PhysicalElement uint16 Table 2-5. DELL_Chassis Properties (continued) Class Name: DELL_Chassis Parent Class: CIM_Chassis Property Description LogFormat Defines whether the event log data is unicode uint16 formatted or binary (raw). Values for the event LogFormat property are: Data Type 1 - Formatted (event log only) 2 - Unformatted 3 - Events_and_POST_Formatted (both the event log and the power-on self-test (POST) log are unicode for matted) FanStatus Indicates the global status of fan sensors. string TempStatus Indicates the global status of temperature sensors. string VoltStatus Indicates the global status of voltage sensors. string AmpStatus Indicates the global status of current sensors. string PsStatus Indicates the global status of power supplies. string MemStatus Indicates the global status of memory devices. string ProcStatus Indicates the global status of processor devices. string FanRedStatus Indicates the global status of the cooling unit. string PsRedStatus Indicates the global status of the power unit. IsDefaultThrSupported Indicates whether resetting default thresholds Boolean are supported. string ChassisSystemProperties Indicates chassis characteristics, such as energy uint16 smart etc. ChassisSystemRevision Indicates the chassis revision. CIM_PhysicalElement uint16 23 CIM_PhysicalComponent CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalComponent The CIM_PhysicalComponent class listed in Table 2-6 represents any lowlevel or basic component within a package. A component object either cannot or does not need to be broken down into its constituent parts. For example, an application specific integrated circuit (ASIC) cannot be broken down into smaller discrete parts. Table 2-6. CIM_PhysicalComponent Properties Class Name: CIM_PhysicalComponent Parent Class: CIM_PhysicalElement CIM_Chip CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalComponent CIM_Chip The CIM_Chip class listed in Table 2-7 represents any type of integrated circuit hardware, including ASICs, processors, memory chips, and so on. 24 CIM_PhysicalElement Table 2-7. CIM_Chip Properties Class Name: CIM_Chip Parent Class: CIM_PhysicalComponent Property Description Data Type FormFactor 0 - Unknown uint16 1 - Other 2 - SIP 3 - DIP 4 - ZIP 5 - SOJ 6 - Proprietary 7 - SIMM 8 - DIMM 9 - TSOP 10 - PGA 11 - RIMM 12 - SODIMM 13 - SRIMM 14 - SMD 15 - SSMP 16 - QFP 17 - TQFP 18 - SOIC 19 - LCC 20 - PLCC 21 - BGA 22 - FPBGA 23 - LGA 24 - FB-DIMM CIM_PhysicalElement 25 CIM_PhysicalMemory CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalComponent CIM_Chip CIM_PhysicalMemory The CIM_PhysicalMemory class described in Table 2-8 is a subclass of CIM_Chip, representing low-level memory devices, such as SIMMS, DIMMs, and so on. Table 2-8. CIM_PhysicalMemory Properties Class Name: CIM_PhysicalMemory Parent Class: CIM_Chip Property Description Data Type FormFactor See Table 2-7. uint16 MemoryType Indicates the type of physical memory. Values for the MemoryType property are: uint16 0 - Unknown 1 - Other 2 - DRAM 3 - Synchronous DRAM 4 - Cache DRAM 5 - EDO 6 - EDRAM 7 - VRAM 8 - SRAM 9 - RAM 10 - ROM 26 CIM_PhysicalElement Table 2-8. CIM_PhysicalMemory Properties (continued) Class Name: CIM_PhysicalMemory Parent Class: CIM_Chip Property Description MemoryType (continued) 11 - Flash Data Type 12 - EEPROM 13 - FEPROM 14 - EPROM 15 - CDRAM 16 - 3DRAM 17 - SDRAM 18 - SGRAM 19 - RDRAM 20 - DDR 21 - DDR2 22 - DDR2 FB-DIMM 24 - DDR3 TotalWidth Indicates the total width, in bits, of the physical memory, including check or error correction bits. If there are no error correction bits, the value in this property should match that specified for the DataWidth property. uint16 DataWidth Indicates the data width, in bits, of the physical memory. A data width of 0 and a total width of 8 would indicate that the memory is solely used to provide error correction bits. uint16 Speed Indicates the speed of the physical memory, in nanoseconds. uint32 SpeedAsString Indicates the accurate speed of the physical memory, in string format (with units). string Capacity Indicates the total capacity of this physical memory, in bytes. uint64 CIM_PhysicalElement 27 Table 2-8. CIM_PhysicalMemory Properties (continued) Class Name: CIM_PhysicalMemory Parent Class: CIM_Chip Property Description BankLabel A string identifying the physically labeled bank string where the memory is located, for example, "Bank 0" or "Bank A." PositionInRow Specifies the position of the physical memory in a “row.” For example, if it takes two 8-bit memory devices to form a 16-bit row, then a value of 2 means that this memory is the second device. 0 is an invalid value for this property. Data Type uint32 InterleavePosition Indicates the position of this physical memory in uint32 an interleave. 0 indicates noninterleaved. 1 indicates the first position, 2 the second position, and so on. For example, in a 2:1 interleave, a value of 1 indicates that the memory is in the “even” position. CIM_PhysicalConnector CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalConnector The CIM_PhysicalConnector class explained in Table 2-9 includes physical elements such as plugs, jacks, or buses that connect physical elements. Any object that can be used to connect and transmit signals or power between two or more physical elements is a member of this class. For example, slots and D-shell connectors are types of physical connectors. See Table 2-10 for a list of valid connector type values. 28 CIM_PhysicalElement Table 2-9. CIM_PhysicalConnector Properties Class Name: CIM_PhysicalConnector Parent Class: CIM_PhysicalElement Property Description Data Type ConnectorPinout A free-form string describing the pin configuration and signal usage of a physical connector. ConnectorType Table 2-10. string An array of integers defining the type of uint16 physical connector. An array is specified to allow the description of “combinations” of connector information. For example, one array entry could specify RS-232, another DB-25, and a third entry could define the connector as male. See Table 2-10 for the values of the ConnectorType property. Connector Type Values 0 - Unknown 30 - unused 60 - Micro-DIN 1 - Other 31 - unused 61 - PS/2 2 - Male 3 - Female 32 - IEEE-48 33 - AUI 62 - Infrared 63 - unused 92 - 9 Pin Dual Inline 93 - 25 Pin Dual Inline 4 - Shielded 34 - UTP Category 3 64 - Access. bus 94 - 50 Pin Dual Inline 5 - Unshielded 35 - UTP Category 4 36 - UTP Category 5 65 - unused 95 - 68 Pin Dual Inline 66 - Centronics 96 - On Board Sound Connector 7 - SCSI (A) Low-Density (50 pins) 37 - BNC 67 - Mini-Centronics 97 - Mini-jack 8 - SCSI (P) High-Density (68 pins) 38 - RJ11 68 - Mini-Centronics 98 - PCI-X Type-14 6 - SCSI (A) High-Density (50 pins) 9 - SCSI SCA-I (80 pins) 39 - RJ45 10 - SCSI SCA-II (80 pins) 69 - Mini-Centronics Type-20 40 - Fiber MIC 70 - Mini-Centronics Type-26 90 - On Board IDE Connector 91 - On Board Floppy Connector 99 - Sbus IEEE 1396-1993 32-bit 100 - Sbus IEEE 1396-1993 64-bit CIM_PhysicalElement 29 Table 2-10. Connector Type Values (continued) 11 - Fibre Channel (DB-9 Copper) 41 - unused 71 - Bus Mouse 101 - unused 12 - Fibre Channel (Fiber Optical) 42 - unused 72 - ADB 102 - GIO 13 - Fibre Channel SCA- 43 - PCI II (40 pins) 14 - Fibre Channel SCA- 44 - ISA II (20 pins) 73 - AGP 103 - XIO 74 - VME Bus 104 - HIO 15 - Fibre Channel BNC 45 - unused 16 - ATA 3-1/2 Inch 46 - VESA (40 pins) 75 - VME64 76 - Proprietary 105 - NGIO 106 - PMC 17 - ATA 2-1/2 Inch (44 pins) 18 - ATA-2 47 - unused 77 - Proprietary Processor Card Slot 78 - Proprietary Memory Card Slot 107 - MTRJ 19 - ATA-3 49 - unused 79 - Proprietary I/O Riser Slot 109 - Future I/O 20 - ATA/66 21 - DB-9 50 - unused 51 - unused 80 - PCI-66 MHz 81 - AGP2X 110 - SC 111 - SG 22 - DB-15 23 - DB-25 52 - unused 53 - USB 82 - AGP4X 83 - PC-98 112 - Electrical 113 - Optical 24 - DB-36 54 - IEEE 1394 84 - PC-98-Hireso 114 - Ribbon 25 - RS-232C 55 - HIPPI 115 - GLM 26 - RS-422 56 - HSSDC (6 86 - PC-98Note pins) 116 - 1x9 27 - RS-423 57 - GBIC 87 - PC-98Full 117 - Mini SG 28 - RS-485 29 - RS-449 58 - DIN 59 - Mini-DIN 88 - SSA SCSI 89 - Circular 118 - LC 119 - HSSC 30 48 - unused CIM_PhysicalElement 85 - PC-H98 108 - VF-45 CIM_Slot CIM_ManagedSystemElement CIM_PhysicalElement CIM_PhysicalConnector CIM_Slot The CIM_Slot class described in Table 2-11 represents connectors into which packages are inserted. For example, a physical package that is a hard drive can be inserted into a small computer system interface-single connector attachment (SCSI-SCA) slot. As another example, a card can be inserted into a 16-, 32-, or 64-bit expansion slot on a host board. Table 2-11. CIM_Slot Properties Class Name: class CIM_Slot Parent Class: CIM_PhysicalConnector Property Description Data Type ConnectorType See Table 2-10. uint16 SupportsHotPlug Indicates whether the slot supports hot-plug adapter cards. Boolean MaxDataWidth uint16 Indicates the maximum bus width in bits of adapter cards that can be inserted into this slot. Values for the MaxDataWidth property are as follows: 0 - Unknown 1 - Other 8 - Bits 16 - Bits 32 - Bits 64 - Bits 128 - Bits CIM_PhysicalElement 31 Table 2-11. CIM_Slot Properties (continued) SystemSlotType Indicates the type of system slot. Values for the SystemSlotType property are as follows: Other Unknown ISA MCA EISA PCI PCMCIA VL-VESA Proprietary Processor Card Slot Proprietary Memory Card Slot I/O Riser Card Slot NuBus PCI - 66MHz Capable AGP AGP 2X AGP 4X PCI-X AGP 8X PC-98/C20 PC-98/C24 PC-98/E PC-98/Local Bus PC-98/Card PCI Express PCI Express x1 PCI Express x2 PCI Express x4 PCI Express x8 32 CIM_PhysicalElement Table 2-11. Contd. CIM_Slot Properties (continued) PCI Express x16 PCI Express Gen 2 PCI Express Gen 2 x1 PCI Express Gen 2 x2 PCI Express Gen 2 x4 PCI Express Gen 2 x8 PCI Express Gen 2 x16 CIM_PhysicalElement 33 34 CIM_PhysicalElement CIM_LogicalElement CIM_LogicalElement is a CIM-defined class containing the subclasses shown in Figure 3-1. Figure 3-1. CIM_LogicalElement CIM_ManagedSystemElement CIM_LogicalElement CIM_System CIM_ComputerSystem DELL_Chassis CIM_LogicalDevice CIM_FRU CIM_Sensor CIM_DiscreteSensor CIM_NumericSensor CIM_TemperatureSensor CIM_CurrentSensor CIM_VoltageSensor CIM_Tachometer CIM_LogicalPort CIM_NetworkPort DELL_NetworkPort CIM_Watchdog CIM_CoolingDevice CIM_Fan CIM_UserDevice CIM_PointingDevice CIM_Keyboard CIM_PowerSupply CIM_Controller CIM_ParallelController CIM_SerialController CIM_PCIController CMI_PCIDevice CMI_PCIBridge CIM_Processor CIM_StorageExtent CIM_Memory CIM_CacheMemory CIM_SoftwareElement CIM_BIOSElement CIM_LogicalElement 35 CIM_SoftwareFeature DELL_SoftwareFeature CIM_SystemResource CIM_IRQ CIM_MemoryMappedIO CIM_DMA CIM_RedundancyGroup CIM_ExtraCapacityGroup DELL_PSRedundancyGroup DELL_FanRedundancyGroup CIM_EnabledLogicalElement CIM_ServiceAccessPoint CIM_RemoteServiceAccessPoint DELL_RemoteServiceAccessPort CIM_LogicalElement CIM_ManagedSystemElement CIM_LogicalElement Table 3-1 lists the following characteristics for members of the CIM_LogicalElement class: • Represent abstractions used to manage and coordinate aspects of a physical environment such as files, processes, systems, system capabilities, and network components in the form of logical devices • Represent devices, where devices are abstractions of hardware entities that may or may not be realized in physical hardware Table 3-1. CIM_LogicalElement Properties Class Name: CIM_LogicalElement Parent Class: CIM_ManagedSystemElement 36 CIM_LogicalElement CIM_System CIM_ManagedSystemElement CIM_LogicalElement CIM_System The CIM_System class shown in Table 3-2 defines a collection of managed system elements that operates as a functional whole. An instance of the CIM_System class contains a well-defined list of components that work together to perform a specific function. Table 3-2. CIM_System Properties Class Name: CIM_System Parent Class: CIM_LogicalElement Property Description Data Type CreationClassName See Table 1-1. string Name Indicates the name of a specific system, such as a string particular storage system or server. PrimaryOwnerContact Provides information on how the primary system string owner can be reached, for example, a phone number or e-mail address. PrimaryOwnerName Indicates the name of the primary system owner. string Roles An array of strings that specifies the roles this string system plays in the IT environment. For example, for an instance of a network system, the Roles property might contain the string "storage system." CIM_LogicalElement 37 CIM_ComputerSystem CIM_ManagedSystemElement CIM_LogicalElement CIM_System CIM_ComputerSystem The CIM_ComputerSystem class listed in Table 3-3 contains some or all of the following CIM_ManagedSystemElements: file system, operating system, processor, and memory (volatile and/or nonvolatile storage). For properties, see Table 3-2. Table 3-3. CIM_ComputerSystem Properties Class Name: CIM_ComputerSystem Parent Class: CIM_System DELL_System CIM_ManagedSystemElement CIM_LogicalElement CIM_System CIM_ComputerSystem DELL_System The DELL_System class listed in Table 3-4 is the set of all Dell™ instrumented systems, including server, and storage systems. For properties, see Table 3-2. Table 3-4. DELL_System Properties Class Name: DELL_System Parent Class: CIM_ComputerSystem 38 CIM_LogicalElement CIM_LogicalDevice CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice The CIM_LogicalDevice class described in Table 3-5 models a hardware entity that may be realized in physical hardware. CIM_LogicalDevice includes any characteristics of a logical device that manages its operation or configuration. An example of a logical device is a temperature sensor’s reading of actual temperature. Table 3-5. CIM_Logical Device Properties Class Name: CIM_LogicalDevice Parent Class: CIM_LogicalElement Property Description Data Type SystemCreationClassName See Table 1-1. string SystemName Indicates the scoping system’s name. string CreationClassName See Table 1-1. string DeviceID Identifies an address or other identifying string information to uniquely name the logical device. CIM_LogicalElement 39 CIM_FRU CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_FRU The CIM_FRU class described in Table 3-6 contains manufacturing information related to the Field Replaceable Units (FRU) of a system such as a system planar or I/O riser card. Table 3-6. CIM_FRU Properties Class Name: CIM_FRU Parent Class: CIM_LogicalDevice Property Description Data Type FRUInformationState Indicates the state and availability of FRU information. uint 16 FRUDeviceName Indicates the device name of the FRU string FRUManufacturingDateName Indicates the manufacturing date of the datetime FRU in ticks. FRUManufacturerName Indicates the name of the manufacturer. string FRUPartNumberName Indicates the FRU part number. string FRUSerialNumberName Indicates the FRU serial number. string FRURevisionName Indicates the FRU Revision number. string 40 CIM_LogicalElement CIM_LogicalPort CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_LogicalPort The CIM_LogicalPort class listed in Table 3-7 represents the abstraction of a port or connection point of a device. For example, a USB port can be abstracted to represent a port. This feature is used when the abstracted port has independent management characteristics from the device that includes it. Table 3-7. CIM_LogicalPort Properties Class Name: CIM_LogicalPort Parent Class: CIM_LogicalDevice Property Description Data Type Speed Indicates the bandwidth of the port in bits per second. uint64 MaxSpeed Indicates the maximum bandwidth of the port in bits per second. uint64 RequestedSpeed Indicates the requested bandwidth of the port in bits uint64 per second. UsageRestriction Indicates usage parameters for the port. For uint16 example, a storage array may have back end ports to communicate with disk drives and front end ports to communicate with hosts. CIM_LogicalElement 41 CIM_NetworkPort CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_LogicalPort CIM_NetworkPort The CIM_NetworkPort class listed in Table 3-8 describes the logical representation of a network. Table 3-8. CIM_NetworkPort Properties Class Name: CIM_NetworkPort Parent Class: CIM_LogicalPort Property Description Data Type Speed Indicates the bandwidth of the port in bits per second. uint64 PortType Identifies port type and whether it is DMTF reserved or vendor reserved. When this property is set to 1 (Other), the OtherPropertyType property contains a string description of the port type. uint16 OtherPortType When used in conjunction with PortType, this property identifies port type. string LinkTechnology Enumerates the types of links to the device. When uint16 this property is set to 1, the OtherLinktechnology property displays relevant links to the device. 42 CIM_LogicalElement Table 3-8. CIM_NetworkPort Properties (continued) Class Name: CIM_NetworkPort Parent Class: CIM_LogicalPort Property Description Data Type OtherLinkTechnology When used in conjunction with Link Technology, this property displays relevant links to the device. string PermanentAddress Defines the network address hardcoded into a port. string NetworkAddresses Indicates the network addresses for a port. string FullDuplex Indicates whether the port is operating in a full duplex mode. Boolean AutoSense Indicates whether the Network Port is capable of automatically determining the speed or other characteristics of network attached media. Boolean SupportedMaximum TransmissionUnit Indicates the maximum transmission unit supported. uint64 ActiveMaximumTran Indicates the active or negotiated maximum smissionUnit transmission unit supported. uint64 DELL_ManagedSystemServicesDevice The DELL_ManagedSystemServicesDevice class listed in Table 3-9 defines the type, size of storage devices in MB, and related information. CIM_LogicalElement 43 Table 3-9. DELL_ManagedSystemServicesDevice properties Class Name: DELL_ManagedSystemServicesDevice Parent Class: CIM_LogicalDevice Property Description Data Type deviceType Defines the type of storage device. The values for this property can be: uint8 0 - Base managed device 1 - Optional managed device storagePresent Defines the storage device present on the card. boolean deviceSize Indicates the size of storage uint32 device in MB. DELL_NetworkPort CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_LogicalPort CIM_NetworkPort DELL_NetworkPort The DELL_NetworkPort class listed in Table 3-10 represents the abstraction of a port or connection point of a device. For example, a USB port can be abstracted to represent a port. This feature is used when the abstracted port has independent management characteristics from the device that includes it. 44 CIM_LogicalElement Table 3-10. DELL_NetworkPort Properties Class Name: Dell_NetworkPort Parent Class: CIM_NetworkPort Property Description Data Type NicTOECapability Defines NIC TCP Offload Engine (TOE) capability. The following values, with explanations, are possible for this property: uint32 0 - NIC/driver does not support querying for capability. 1 - NIC/driver supports querying for capability but query returned an error. 2 - NIC/driver supports querying for capability and query says it is capable. 4 - NIC/driver supports querying for capability and query says it is not capable. 8 - NIC/driver supports querying for capability but error prevented querying NIC/driver. 16 - NIC/driver supports querying for capability but NIC/driver did not respond to query. NicRDMACapability Defines NIC Remote Direct Memory Access uint32 (RDMA) capability. The following values, with explanations, are possible for this property: 0 - NIC/driver does not support querying for capability. 1 - NIC/driver supports querying for capability but query returned an error. 2 - NIC/driver supports querying for capability and query says it is capable. 4 - NIC/driver supports querying for capability and query says it is not capable. 8 - NIC/driver supports querying for capability but error prevented querying NIC/driver. 16 - NIC/driver supports querying for capability but NIC/driver did not respond to query. CIM_LogicalElement 45 Table 3-10. DELL_NetworkPort Properties (continued) Class Name: Dell_NetworkPort Parent Class: CIM_NetworkPort Property Description NiciSCSICapability Defines NIC Internet Small Computer System uint32 Interface (iSCSI) Capability. The following values, with explanations, are possible for this property: Data Type 0 - NIC/driver does not support querying for capability. 1 - NIC/driver supports querying for capability but query returned an error. 2 - NIC/driver supports querying for capability and query says it is capable. 4 - NIC/driver supports querying for capability and query says it is not capable. 8 - NIC/driver supports querying for capability but error prevented querying NIC/driver. 16 - NIC/driver supports querying for capability but NIC/driver did not respond to query. IsTOEEnable Indicates whether TOE is enabled. Boolean IsRDMAEnable Indicates whether RDMA is enabled. Boolean IsiSCSIEnable Indicates whether SCSI is enabled. Boolean NicStatus Indicates NIC /driver status. The following values are possible: uint32 0 - Unknown 1 - Connected 2 - Disconnected 3 - Driver Bad 4 - Driver Disabled 10 - Hardware initializing 11 - Hardware resetting 12 - Hardware closing 13 - Hardware not ready 46 CIM_LogicalElement Table 3-10. DELL_NetworkPort Properties (continued) Class Name: Dell_NetworkPort Parent Class: CIM_NetworkPort Property Description Data Type BusNumber Indicates the PCI bus number. uint8 FunctionNumber Indicates the PCI Function number. uint8 Driver version Indicates the NIC driver version. string IPAddress Indicates the NIC IP Address. string SubnetMask Indicates the NIC subnet mask. string DHCPServer Indicates the NIC DHCP Server. string DefaultGateway Indicates the NIC default gateway. string CurrentMACAddress Indicates the NIC current MAC address. string OSAdapterDescription Describes the OS Adapter. string OSAdapterVendor Provides OS Adapter vendor details. string OSAdapterProductName Identifies the OS Adapter name. string ServiceName string Identifies the Service Name. CIM_Sensor CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Sensor CIM_NumericSensor CIM_CurrentSensor The CIM_Sensor class explained in Table 3-11 contains hardware devices capable of measuring the characteristics of some physical property, for example, the temperature or voltage characteristics of a computer system. CIM_LogicalElement 47 Table 3-11. CIM_Sensor Properties Class Name: CIM_Sensor Parent Class: CIM_LogicalDevice Property Description Data Type SensorType The type of the sensor, for example, voltage or temperature sensor. uint16 Values for the SensorType property are: 0 - Unknown 1 - Other 2 - Temperature sensors measure the environmental temperature. 3 - Voltage sensors measure electrical voltage. 4 - Current sensors measure current readings. 5 - Tachometers measure speed/revolutions of a device. For example, a fan device can have an associated tachometer that measures its speed. 6 - Batteries maintain the time and date and save the system’s BIOS configuration when the system is switched off. OtherSensorType The type of sensor when the SensorType property is string Description set to Other. PossibleStates Enumerates the string outputs of the sensor. For example, a NumericSensor can report states based on threshold readings. CurrentState Indicates the current state of the sensor. This value string is always one of the Possible States. PollingInterval Indicates the polling interval, in nanoseconds, that the sensor hardware or instrumentation uses to determine the current state of the sensor. 48 CIM_LogicalElement string uint64 CIM_DiscreteSensor CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Sensor CIM_DiscreteSensor The CIM_DiscreteSensor class described in Table 3-12 has a set of legal string values that it can report. The CIM_DiscreteSensor will always have a "current reading" that corresponds to one of the enumerated values. Table 3-12. CIM_DiscreteSensor Properties Class Name: CIM_DiscreteSensor Parent Class: CIM_Sensor Property Description Data Type CurrentReading See Table 1-1. PossibleValues sint32 Enumerates the string outputs that can be reported by sint32 the sensor. CIM_NumericSensor CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Sensor CIM_NumericSensor The CIM_NumericSensor class described in Table 3-13 returns numeric settings and may also support threshold settings. Figure 3-2 shows the relationship among upper and lower critical and upper and lower non-critical threshold values. The normal range falls between upper and lower non-critical thresholds. CIM_LogicalElement 49 Figure 3-2. Ranges for Threshold Values FATAL CRITICAL UPPER WARNING UPPER User Definable NONCRITICAL NORMAL LOWER User Definable NONCRITICAL WARNING LOWER CRITICAL FATAL Table 3-13 provides definitions for NumericSensor properties. Table 3-13. CIM_NumericSensor Properties Class Name: CIM_NumericSensor Parent Class: CIM_Sensor Property Description Data Type UnitModifier See Table 1-1. sint32 CurrentReading See Table 1-1. sint32 IsLinear See Table 1-1. Boolean LowerThresholdNonCritical See Table 1-1. 50 CIM_LogicalElement sint32 Table 3-13. CIM_NumericSensor Properties (continued) Class Name: CIM_NumericSensor Parent Class: CIM_Sensor Property Description Data Type UpperThresholdNonCritical See Table 1-1. sint32 LowerThresholdCritical See Table 1-1. sint32 UpperThresholdCritical See Table 1-1. sint32 SupportedThresholds An array representing the thresholds supported by this sensor. The supported values are as follows: uint16 1 - LowerThresholdNonCritical 2 - UpperThresholdNonCritical 3 - LowerThresholdCritical 4 - UpperThresholdCritical EnabledThresholds An array representing the thresholds that are uint16 currently enabled for this sensor. Enabled threshold values are as follows: 1 - LowerThresholdNonCritical 2 - UpperThresholdNonCritical 3 - LowerThresholdCritical 4 - UpperThresholdCritical SettableThresholds An array representing the writable thresholds supported by sensor. uint16 Settable threshold values are: 1 - LowerThresholdNonCritical 2 - UpperThresholdNonCritical CIM_LogicalElement 51 CIM_TemperatureSensor CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Sensor CIM_NumericSensor CIM_TemperatureSensor The CIM_TemperatureSensor class listed in Table 3-14 contains sensors that sample ambient temperature and return a value in degrees Celsius. Table 3-14. CIM_TemperatureSensor Properties Class Name: CIM_TemperatureSensor Parent Class: CIM_NumericSensor Property Description Data Type UnitModifier See Table 1-1. sint32 CurrentReading See Table 1-1. sint32 IsLinear See Table 1-1. Boolean LowerThresholdNonCritical See Table 1-1. sint32 UpperThresholdNonCritical See Table 1-1. sint32 LowerThresholdCritical See Table 1-1. sint32 UpperThresholdCritical See Table 1-1. sint32 52 CIM_LogicalElement CIM_CurrentSensor CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Sensor CIM_NumericSensor CIM_CurrentSensor The CIM_CurrentSensor class listed in Table 3-15 contains sensors that measure amperage and returns a value in amperes and watts. Table 3-15. CIM_CurrentSensor Properties Class Name: CIM_CurrentSensor Parent Class: CIM_NumericSensor Property Description Data Type UnitModifier See Table 1-1. sint32 CurrentReading See Table 1-1. sint32 IsLinear See Table 1-1. Boolean LowerThresholdNonCritical See Table 1-1. sint32 UpperThresholdNonCritical See Table 1-1. sint32 LowerThresholdCritical See Table 1-1. sint32 UpperThresholdCritical See Table 1-1. sint32 CIM_LogicalElement 53 CIM_VoltageSensor CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Sensor CIM_NumericSensor CIM_VoltageSensor The CIM_VoltageSensor class shown in Table 3-16 contains sensors that measure voltage and return a value in volts. Table 3-16. CIM_VoltageSensor Properties Class Name: CIM_VoltageSensor Parent Class: CIM_NumericSensor Property Description Data Type UnitModifier See Table 1-1. sint32 CurrentReading See Table 1-1. sint32 IsLinear See Table 1-1. Boolean LowerThresholdNonCritical See Table 1-1. sint32 UpperThresholdNonCritical See Table 1-1. sint32 LowerThresholdCritical See Table 1-1. sint32 UpperThresholdCritical See Table 1-1. sint32 54 CIM_LogicalElement CIM_Tachometer CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Sensor CIM_NumericSensor CIM_Tachometer The CIM_Tachometer class listed in Table 3-17 contains devices that measure revolutions per minute (RPM) of a fan and return the value in RPMs. Table 3-17. CIM_Tachometer Properties Class Name: CIM_Tachometer Parent Class: CIM_NumericSensor Property Description Data Type SensorType See Table 1-1. uint16 UnitModifier See Table 1-1. sint32 CurrentReading See Table 1-1. sint32 IsLinear See Table 1-1. Boolean LowerThresholdNonCritical See Table 1-1. sint32 UpperThresholdNonCritical See Table 1-1. sint32 CIM_LogicalElement 55 CIM_WatchDog CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Watchdog The CIM_WatchDog class described in Table 3-18 represents a timer that is implemented in system hardware. The watchdog feature allows the hardware to monitor the state of the operating system, BIOS, or a software component installed on the system. If the monitored component fails to rearm the timer before its expiration, the hardware assumes that the system is in a critical state and could reset the system. This feature can also be used as an application watchdog timer for a mission-critical application. In this case, the application would assume responsibility for rearming the timer before expiration. Table 3-18. CIM_WatchDog Properties Class Name: CIM_WatchDog Parent Class: CIM_LogicalDevice Property Description Data Type MonitoredEntity Indicates the entity that is currently being monitored by the watchdog feature. This property is used to identify the module that is responsible for rearming the watchdog at periodic intervals. Values for the MonitoredEntity property are: uint16 1 - Unknown 2 - Other 3 - Operating System MonitoredEntity Description 56 A string describing additional textual information about the monitored entity. CIM_LogicalElement string Table 3-18. CIM_WatchDog Properties (continued) Class Name: CIM_WatchDog Parent Class: CIM_LogicalDevice Property Description Data Type TimeoutInterval Indicates the time-out interval used by the watchdog, in microseconds. uint32 TimerResolution Indicates the resolution of the watchdog timer. For example, if this value is 100, then the timer can expire anytime between –100 microseconds and +100 microseconds. uint32 CIM_CoolingDevice CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_CoolingDevice The CIM_CoolingDevice class described in Table 3-19 contains a set of devices that work to keep the ambient internal temperature of the system at a safe value. Table 3-19. CIM_CoolingDevice Properties Class Name: CIM_CoolingDevice Parent Class: CIM_LogicalDevice Property Description Data Type ActiveCooling Specifies whether the device provides active (as opposed to passive) cooling. Boolean CIM_LogicalElement 57 CIM_Fan CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_CoolingDevice CIM_Fan The CIM_Fan class explained in Table 3-20 contains a set of devices that work to keep the ambient internal temperature of the system at a safe value by circulating air. Table 3-20. CIM_Fan Properties Class Name: CIM_Fan Parent Class: CIM_CoolingDevice Property Description Data Type VariableSpeed Specifies whether the fan supports variable speeds. Boolean DesiredSpeed Indicates the currently requested fan speed, defined in uint64 RPM. When the value = TRUE, the fan supports variable speeds. When a variable speed fan is supported (VariableSpeed Boolean = TRUE), the actual speed is determined using a sensor (CIM_Tachometer) that is associated with the fan. 58 CIM_LogicalElement CIM_UserDevice CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_UserDevice The CIM_UserDevice class shown in Table 3-21 contains logical devices that allow a computer system’s users to input, view, or hear data. Classes derived from CIM_UserDevice include CIM_Keyboard and CIM_PointingDevice. Table 3-21. CIM_UserDevice Properties Class Name: CIM_UserDevice Parent Class: CIM_LogicalDevice Property Description IsLocked Indicates whether the device is locked, preventing user Boolean input or output. Data Type CIM_PointingDevice CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_UserDevice CIM_PointingDevice The CIM_PointingDevice class described in Table 3-22 includes those devices used to point to regions of a display. Examples are a mouse or a trackball. CIM_LogicalElement 59 Table 3-22. CIM_PointingDevice Properties Class Name: CIM_PointingDevice Parent Class: CIM_UserDevice Property Description PointingType Indicates the type of pointing device. Values for the uint16 PointingType property are: Data Type 1 - Other 2 - Unknown 3 - Mouse 4 - Trackball 5 - Trackpoint 6 - Glidepoint 7 - Touch pad 8 - Touch screen 9 - Mouse—optical sensor NumberOfButtons Indicates the number of buttons. If the CIM_PointingDevice has no buttons, a value of 0 is returned. Handedness Integer indicating whether the CIM_PointingDevice uint16 is configured for right- or left-handed operation. Values for the Handedness property are as follows: 0 - Unknown 1 - Not applicable 2 - Right-handed operation 3 - Left-handed operation 60 uint8 CIM_LogicalElement CIM_Keyboard CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_UserDevice CIM_Keyboard The CIM_Keyboard class explained in Table 3-23 includes devices that allow users to enter data. Table 3-23. CIM_Keyboard Properties Class Name: CIM_Keyboard Parent Class: CIM_UserDevice Property Description Data Type NumberOfFunctionKeys Indicates the number of function keys on the keyboard. uint16 Layout A free-form string indicating the format and layout of the keyboard. string Password An integer indicating whether a hardware-level uint16 password is enabled at the keyboard, preventing local input. Values for the Password property are: 1 - Other 2 - Unknown 3 - Disabled 4 - Enabled 5 - Not implemented CIM_LogicalElement 61 CIM_PowerSupply CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_PowerSupply The CIM_PowerSupply class described in Table 3-24 contains devices that provide current and voltage for the operation of the system and its components. Table 3-24. CIM_PowerSupply Properties Class Name: CIM_PowerSupply Parent Class: CIM_LogicalDevice Property Description Data Type IsSwitchingSupply Indicates that the power supply is a switching power supply and not a linear power supply. Boolean Range1InputVoltageLow Indicates the low voltage in millivolts of input uint32 voltage range 1 for this power supply. A value of 0 denotes unknown. Range1InputVoltageHigh Indicates the high voltage in millivolts of input uint32 voltage range 1 for this power supply. A value of 0 denotes unknown. 62 CIM_LogicalElement Table 3-24. CIM_PowerSupply Properties (continued) Class Name: CIM_PowerSupply Parent Class: CIM_LogicalDevice Property Description ActiveInputVoltage Indicates which input voltage range is currently uint16 in use. Range 1, 2, or both can be specified using the values 3, 4, or 5, respectively. If the supply is not drawing power, a value of 6 (neither) can be specified. This information is necessary in the case of an uninterruptible power supply (UPS), a subclass of power supply. Values for the ActiveInputVoltage property are: Data Type 1 - Other 2 - Unknown 3 - Range 1 4 - Range 2 5 - Both range 1 and range 2 6 - Neither range 1 nor range 2 TotalOutputPower Represents the total output power of the power uint32 supply in milliwatts. A value of 0 denotes that the power output is unknown. PMCapable Indicates the Power Monitoring capability. CIM_LogicalElement Boolean 63 CIM_Controller CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Controller The CIM_Controller class shown in Table 3-25 groups miscellaneous controlrelated devices. Examples of controllers are small computer system interface (SCSI) controllers, Universal Serial Bus (USB) controllers, and serial controllers. Table 3-25. CIM_Controller Properties Class Name: CIM_Controller Parent Class: CIM_LogicalDevice Property Description Data Type ProtocolSupported The protocol used by the controller to access controlled devices. Values for the ProtocolSupported property are: uint16 1 - Other 2 - Unknown 3 - PCI 4 - Parallel protocol 64 CIM_LogicalElement CIM_ParallelController CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Controller CIM_ParallelController The CIM_ParallelController class identified in Table 3-26 contains a set of objects that control parallel devices. Parallel controllers transfer 8 or 16 bits of data at a time to the devices they control, for example, a parallel port controlling a printer. Table 3-26. CIM_ParallelController Properties Class Name: CIM_ParallelController Parent Class: CIM_Controller Property Description Data Type DMASupport Set to TRUE if the parallel controller supports DMA. Boolean Security An enumeration indicating the operational security for uint16 the controller. Values for the Security property are: 1 - Other 2 - Unknown 3 - None 4 - External interface locked out 5 - External interface enabled 6 - Boot bypass CIM_LogicalElement 65 CIM_SerialController CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Controller CIM_SerialController The CIM_SerialController class explained in Table 3-27 contains controllers that transfer data one bit at a time to the devices they control, for example, a serial port controlling a modem. Table 3-27. CIM_SerialController Properties Class Name: CIM_SerialController Parent Class: CIM_Controller Property Description MaxBaudRate Indicates the maximum baud rate in bits per second uint32 supported by the serial controller. Security An enumeration indicating the operational security for the controller. Values for the Security property are: 1 - Other 2 - Unknown 3 - None 4 - External interface locked out 5 - External interface enabled 6 - Boot bypass 66 CIM_LogicalElement Data Type uint16 CIM_PCIController CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Controller CIM_PCIController The CIM_PCIController class listed in Table 3-28 contains a set of devices that follow the Peripheral Component Interconnect (PCI) protocol defined by the Personal Computer Memory Card International Association (PCMCIA). The PCI protocol defines how data is transferred between devices. The CIM_PCIController class contains PCI adapters and bridges. Table 3-28. CIM_PCIController Properties Class Name: CIM_PCIController Parent Class: CIM_Controller Property Description Data Type CommandRegister The current contents of the register that provides uint16 basic control over the device’s ability to respond to, and/or perform PCI accesses. The data in the capabilities array is gathered from the PCI status register and the PCI capabilities list as defined in the PCI specification. CIM_LogicalElement 67 Table 3-28. CIM_PCIController Properties (continued) Class Name: CIM_PCIController Parent Class: CIM_Controller Property Description Data Type Values for the CommandRegister property are: 0 - Unknown 1 - Other 2 - Supports 66 MHz 3 - Supports user-definable features 4 - Supports fast back-to-back transactions 5 - PCI-X capable 6 - PCI power management supported 7 - Message signaled interrupts supported 8 - Parity error recovery capable 9 - AGP supported 10 - Vital product data supported 11 - Provides slot identification 12 - Hot swap supported CIM_PCIDevice CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Controller CIM_PCIController CIM_PCIDevice The CIM_PCIDevice class shown in Table 3-29 describes the capabilities and management of a PCI device controller on an adapter card. 68 CIM_LogicalElement Table 3-29. CIM_PCIDevice Properties Class Name: CIM_PCIDevice Parent Class: CIM_PCIController Property Description Data Type BaseAddress Identifies an array of up to six doubleword base memory addresses. uint32 SubsystemID Identifies a subsystem identifier code. uint16 SubsystemVendorID Identifies a subsystem vendor ID. ID uint16 information is reported from a PCI device via protocol-specific requests. This information is also present in the CIM_PhysicalElement class (the manufacturer property) for hardware, and the CIM_Product class (the vendor property) for information related to product acquisition. ExpansionROMBaseAddress Identifies a double-word expansion ROM uint32 base memory address. CIM_PCIBridge CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Controller CIM_PCIController CIM_PCIBridge The CIM_PCIBridge class shown in Table 3-30 describes the capabilities and management of a PCI controller providing bridge-to-bridge capability. An example is a PCI to Industry-Standard Architecture (ISA) bus bridge. CIM_LogicalElement 69 Table 3-30. CIM_PCIBridge Properties Class Name: CIM_PCIBridge Parent Class: CIM_PCIController Property Description Data Type BaseAddress Identifies an array of double-word base memory addresses. uint32 BridgeType Indicates the type of bridge. A bridge is PCI to <value>, except for the Host, which is a host-to-PCI bridge. Values for the BridgeType property are as follows: uint16 0 - Host 1 - ISA 128 - Other BaseAddress Identifies an array of double-word base memory addresses. uint32 CIM_Processor CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_Processor The CIM_Processor class described in Table 3-31 contains devices that interpret and execute commands, for example, the Intel® Xeon® microprocessor. 70 CIM_LogicalElement Table 3-31. CIM_Processor Properties Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description Data Type Role A string describing the role of the microprocessor, for example, central microprocessor or math processor. string UpgradeMethod uint16 Provides microprocessor socket information including data on how this microprocessor can be upgraded (if upgrades are supported). This property is an integer enumeration. Values for the UpgradeMethod property are as follows: 1 - Other 2 - Unknown 3 - Daughter board 4 - ZIF socket 5 - Replacement/piggy back 6 - None 7 - LIF socket 8 - Slot 1 9 - Slot 2 10 - 370-pin socket 19 - Socket mPGA604 20 - Socket LGA771 21 - Socket LGA775 22 - Socket S1 23 - Socket AM2 24- Socket F (1207) 25- Socket LGA1366 MaxClockSpeed Indicates the maximum speed (in MHz) of this microprocessor. uint32 Core count Indicates the number of core processors detected. uint16 CIM_LogicalElement 71 Table 3-31. CIM_Processor Properties (continued) Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description Data Type CoreEnabledCount Indicates the number of core processors enabled. uint16 CurrentClockSpeed Indicates the current speed (in MHz) of this microprocessor. uint32 DataWidth Indicates the processor data width in bits. uint16 AddressWidth Indicates the processor address width in bits. uint16 Stepping Indicates the revision level of the processor within the microprocessor family. string UniqueID Identifies a globally unique identifier for the string microprocessor. This identifier may only be unique within a microprocessor family. Brand Indicates the brand name of the processor. string Model Indicates the model name of the processor. string ExtendedCharacteri Indicates the extended capabilities of the processor. uint16 stics This attribute is a bit field. The following are the definitions of a bit when set to one: Bit 0 — Virtualization Technology (VT) supported Bit 1 — Demand-Based Switching (DBS) supported Bit 2 — eXecute Disable (XD) supported Bit 3 — Hyper Threading (HT) supported 72 CIM_LogicalElement Table 3-31. CIM_Processor Properties (continued) Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description ExtendedStates Indicates the setting of the extended capabilities of uint16 the processor. This attribute is a bit field. The following are the definitions of a bit when set to one: Data Type Bit 0 — Virtualization Technology (VT) enabled Bit 1 — Demand-Based Switching (DBS) enabled Bit 2 — eXecute Disable (XD) enabled Bit 3 — Hyper Threading (HT) enabled CPUStatus Indicates the current status of the microprocessor. For example, it may be disabled by the user via the BIOS or disabled due to a POST error. Values for the CPUStatus property are as follows: uint16 0 - Unknown 1 - Microprocessor enabled 2 - Microprocessor disabled by user via BIOS setup 3 - Microprocessor disabled by BIOS (POST error) 4 - Microprocessor is idle 5 - Other CIM_LogicalElement 73 Table 3-31. CIM_Processor Properties (continued) Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description Data Type Family Refers to the processor family type. Values for the Family property are as follows: uint16 1 - Other 2 - Unknown 3 - 8086 4 - 80286 5 - 80386 6 - 80486 7 - 8087 8 - 80287 9 - 80387 10 - 80487 11 - Pentium® Brand 12 - Pentium Pro 13 - Pentium II 14 - Pentium processor with MMX™ technology 15 - Celeron™ 16 - Pentium II Xeon 17 - Pentium III 18 - M1 family 19 - M2 family 24 - AMD® Duron™ Processor 25 - K5 family 26 - K6 family 27 - K6 -2 28 - K6-3 74 CIM_LogicalElement Table 3-31. CIM_Processor Properties (continued) Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description Family (continued) 29 - AMD Athlon™ Processor Family Data Type 30 - AMD29000 Family 31 - K6-2+ 32 - Power PC Family 33 - Power PC 601 34 - Power PC 603 35 - Power PC 603+ 36 - Power PC 604 37 - Power PC 620 38 - Power PC X704 39 - Power PC 750 48 - Alpha Family 49 - Alpha 21064 50 - Alpha 21066 51 - Alpha 21164 52 - Alpha 21164PC 53 - Alpha 21164a 54 - Alpha 21264 55 - Alpha 21364 64 - MIPS Family 65 - MIPS R4000 66 - MIPS R4200 67 - MIPSR4400 68 - MIPS R4600 69 - MIPS R10000 80 - SPARC Family 81 - SuperSPARC CIM_LogicalElement 75 Table 3-31. CIM_Processor Properties (continued) Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description Family (continued) 82 - microSPARC II 83 - microSPARC IIep 84 - UltraSPARC 85 - UltraSPARC II 86 - UltraSPARC IIi 87 - UltraSPARC III 88 - UltraSPARC IIIi 96 - 68040 97 - 68xxx Family 98 - 68000 99 - 68010 100 - 68020 101 - 68030 112 - Hobbit family 120 - Crusoe™ 5000 Family 121 - Crusoe™ 3000 Family 122 - Efficeon™8000 Family 128 - Weitek 130 - Itanium™ Processor 131 - AMD Athlon™ 64 Processor Family 132 - AMD Opteron™ Processor Family 133 - AMD Sempron Processor Family 134 - AMD Turion 64 Mobile Technology 135 - Dual-Core AMD Opteron Processor family 136 - AMD Athlon 64 X2 Dual-Core Processor family 137 - AMD Turion™ 64 X2 Mobile Technology 138 - Quad-Core AMD Opteron™ Processor Family 76 CIM_LogicalElement Data Type Table 3-31. CIM_Processor Properties (continued) Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description Family (continued) 139 - Third-Generation AMD Opteron™ Processor Family Data Type 144 - PA-RISC family 145 - PA-RISC 8500 146 - PA-RISC 8000 147 - PA-RISC 7300LC 148 - PA-RISC 7200 149 - PA-RISC 7100LC 150 - PA-RISC 7100 160 - V30 family 171- Dual-Core Intel® Xeon processor 5200 Series 172- Dual-Core Intel Xeon processor 7200 Series 173- Quad-Core Intel Xeon processor 7300 Series 174- Quad-Core Intel Xeon processor 7400 Series 175- Multi-Core Intel Xeon processor 7400 Series 176 - Pentium® III Xeon 177 - Pentium III Processor with Intel SpeedStep™ 178 - Technology 179 - Pentium® 4 180 - Intel Xeon 181 - AS400 Family 182 - Intel Xeon Processor MP 183 - AMD Athlon XP family 184 - AMD Athlon™ MP family 185 - Intel Itanium 2 186 - Intel Pentium M processor 187 - Intel Celeron D Processor 188 - Intel Pentium D Processor CIM_LogicalElement 77 Table 3-31. CIM_Processor Properties (continued) Class Name: CIM_Processor Parent Class: CIM_LogicalDevice Property Description 189 - Intel Pentium Extreme Edition processor 190 - Intel Core 2 processor 200 - S/390 and zseries family 201 - ESA/390 G4 202 - ESA/390 G5 203 - ESA/390 G6 204 - z/Architecture base 214 - Multi-Core Intel Xeon® processor 215 - Dual-Core Intel Xeon processor 3xxx Series 216 - Quad-Core Intel Xeon processor 3xxx Series 218 - Dual-Core Intel Xeon processor 5xxx Series 219 - Quad-Core Intel Xeon processor 5xxx Series 221 - Dual-Core Intel Xeon processor 7xxx Series 222 - Quad-Core Intel Xeon processor 7xxx Series 223 - Multi-Core Intel Xeon processor 7xxx Series 250 - i860™ 251 - i960™ 260 - SH-3 261 - SH-4 280 - ARM 281 - StrongARM 300 - 6x86 301 - MediaGX 302 - MII 320 - WinChip 350 - DSP 500 - Video processor 78 CIM_LogicalElement Data Type CIM_StorageExtent CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_StorageExtent CIM_StorageExtent identified in Table 3-32 contains devices that manage data storage, for example, hard drives or microprocessor memory. Table 3-32. CIM_StorageExtent Properties Class Name: CIM_StorageExtent Parent Class: CIM_LogicalDevice CIM_Memory CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_StorageExtent CIM_Memory The CIM_Memory class identified in Table 3-33 describes the capabilities and management of storage extent devices, for example, cache memory or system memory. Table 3-33. CIM_Memory Properties Class Name: CIM_Memory Parent Class: CIM_StorageExtent CIM_LogicalElement 79 CIM_CacheMemory CIM_ManagedSystemElement CIM_LogicalElement CIM_LogicalDevice CIM_StorageExtent CIM_Memory CIM_CacheMemory The CIM_CacheMemory class explained in Table 3-34 describes the capabilities and management of cache memory. Cache memory allows a microprocessor to access data and instructions faster than normal system memory. Table 3-34. CIM_CacheMemory Properties Class Name: CIM_CacheMemory Parent Class: CIM_Memory Property Description Data Type Level Defines whether this is the primary, secondary, or tertiary cache. Values for the Level property are as follows: uint16 1 - Other 2 - Unknown 3 - Primary 4 - Secondary 5 - Tertiary 6 - Not applicable 80 CIM_LogicalElement Table 3-34. Class Name: CIM_CacheMemory Properties (continued) CIM_CacheMemory Parent Class: CIM_Memory Property Description Data Type WritePolicy Either defines whether this cache is a write-back or uint16 write-through cache or whether this information varies with address or is defined individually for each input/output (I/O). Values for the WritePolicy property are as follows: 1 - Other 2 - Unknown 3 - Write-back 4 - Write-through 5 - Varies with address 6 - Determination per I/O CacheType Defines whether this cache is for instruction caching, uint16 data caching, or both (unified). Values for the CacheType property are as follows: 1 - Other 2 - Unknown 3 - Instruction 4 - Data 5 - Unified LineSize Indicates the size, in bytes, of a single cache bucket or uint32 line. ReadPolicy Defines the policy used by the cache for handling read uint16 requests. Values for the ReadPolicy property are as follows: 1 - Other 2 - Unknown 3 - Read 4 - Read-ahead 5 - Read and read-ahead 6 - Determination per I/O CIM_LogicalElement 81 CIM_SoftwareElement CIM_ManagedSystemElement CIM_LogicalElement CIM_SoftwareElement The CIM_SoftwareElement class described in Table 3-35 is used to define a CIM_SoftwareFeature. The CIM_SoftwareElement class consists of individually manageable or deployable parts for a particular platform. A software element’s platform is uniquely identified by its underlying hardware architecture and operating system (for example, a system running Microsoft® Windows NT® on an Intel microprocessor). A software element’s implementation on a particular platform depends on the platform’s operating system. Table 3-35. CIM_SoftwareElement Properties Class Name: CIM_SoftwareElement Parent Class: CIM_LogicalElement Property Description Data Type Name Indicates the name that identifies this software element. string Version Provides the version in the form <major>.<minor>.<revision> or <major>.<minor><letter><revision>; for example, 1.2.3 or 1.2a3. string Manufacturer See Table 1-1. string BuildNumber Indicates the internal identifier for this build of the software element. string IdentificationCode Provides the manufacturer’s identifier for this software element. Often this will be a stock keeping unit (SKU) or a part number. string 82 CIM_LogicalElement Table 3-35. CIM_SoftwareElement Properties (continued) Class Name: CIM_SoftwareElement Parent Class: CIM_LogicalElement Property Description Data Type SoftwareElementType Indicates the type of software element. Values for SoftwareElementType are: uint16 1 - Other 2 - Unknown 3 - BIOS 4 - ESM 5 - PSPB 6 - System Backplane 7 - Hendrix (PV20x) Kernel 8 - Hendrix (PV20x) Application 9 - Front Panel 10 - BMC 11 - Hot Plug PCI 12 - SDR 13 - Peripheral Bay Backplane 14 - Slimfast Secondary Backplane 15 - Generic Secondary Backplane (ESM 3&4) 16 - RAC4 17 - iDRAC CIM_LogicalElement 83 CIM_BIOSElement CIM_ManagedSystemElement CIM_LogicalElement CIM_SoftwareElement CIM_BIOSElement The CIM_BIOSElement class listed in Table 3-36 describes the BIOS for the system. The BIOS controls the following: • Communications between the microprocessor and peripheral devices, such as the keyboard and the video adapter • Miscellaneous functions, such as system messages Table 3-36. CIM_BIOSElement Properties Class Name: CIM_BIOSElement Parent Class: CIM_SoftwareElement Property Description Data Type Version Provides the product version information. string Manufacturer See Table 1-1 PrimaryBIOS 84 string Specifies whether a given BIOS is the primary BIOS for Boolean the system. When the value = TRUE, the BIOS is the primary BIOS. CIM_LogicalElement CIM_SoftwareFeature CIM_ManagedSystemElement CIM_LogicalElement CIM_SoftwareFeature The CIM_SoftwareFeature class shown in Table 3-37 defines a particular function or capability of a product or application system. This class is intended to be meaningful to a consumer, or user of a product, rather than to explain how the product is built or packaged. When a software feature can exist on multiple platforms or operating systems (for example, a client component of a three-tiered client/server application might run on Windows NT), a software feature is a collection of all the software elements for these different platforms. The users of the model must be aware of this situation because typically they will be interested in a sub-collection of the software elements required for a particular platform. Table 3-37. CIM_SoftwareFeature Properties Class Name: CIM_SoftwareFeature Parent Class: CIM_LogicalElement Property Description Data Type IdentifyingNumber Provides product identification such as a serial number on software. string ProductName Identifies the commonly used product name. string Vendor Identifies the name of the product’s supplier. Corresponds to the vendor property in the product object in the DMTF solution exchange standard. string Version Identifies the product version information. Corresponds to the version property in the product object in the DMTF solution exchange standard. string Name Defines the label by which the object is known to the string users. This label is a user-defined name that uniquely identifies the element. CIM_LogicalElement 85 DELL_SoftwareFeature CIM_ManagedSystemElement CIM_LogicalElement CIM_SoftwareFeature DELL_SoftwareFeature DELL_SoftwareFeature described in Table 3-38 defines the universal resource locator (URL) of the systems management software and the language in which systems management information displays. Defining these properties enables users to manage a system using an Internet browser. You can access Server Administrator using the secure hypertext transfer protocol (https) and a preassigned port number of 1311, or you can specify a port number of your own choice. Table 3-38. DELL_SoftwareFeature Properties Class Name: DELL_SoftwareFeature Parent Class: CIM_SoftwareFeature Property Description Data Type OmsaURL Defines the URL for Server Administrator. string Language Sets the language for systems management information. string CIM_SystemResource CIM_ManagedSystemElement CIM_LogicalElement CIM_SystemResource The CIM_SystemResource class listed in Table 3-39 provides access to system resources from an operating system. SystemResources consist of interrupt requests (IRQs) and direct memory access (DMA) capabilities. 86 CIM_LogicalElement Table 3-39. CIM_SystemResource Properties Class Name: CIM_SystemResource Parent Class: CIM_LogicalElement CIM_IRQ CIM_ManagedSystemElement CIM_LogicalElement CIM_SystemResource CIM_IRQ The CIM_IRQ class described in Table 3-40 contains IRQ information. An IRQ is a signal that data is about to be sent to or received by a peripheral device. The signal travels by an IRQ line to the microprocessor. Each peripheral connection must be assigned an IRQ number. For example, the first serial port in your computer (COM1) is assigned to IRQ4 by default. Table 3-40. CIM_IRQ Properties Class Name: CIM_IRQ Parent Class: CIM_SystemResource Property Description Data Type CSCreationClassName See Table 1-1. string CSName See Table 1-1. string CreationClassName See Table 1-1. string IRQNumber Identifies the interrupt request number. uint32 CIM_LogicalElement 87 Table 3-40. CIM_IRQ Properties (continued) Class Name: CIM_IRQ Parent Class: CIM_SystemResource Property Description Availability Indicates the availability of the IRQ. Values for uint16 the Availability property are as follows: Data Type 1 - Other 2 - Unknown 3 - Available 4 - In use/not available 5 - In use and available TriggerLevel Indicates whether the interrupt is triggered by uint16 the hardware signal going high or low. Values for the TriggerLevel property are as follows: 1 - Other 2 - Unknown 3 - Active low 4 - Active high TriggerType Indicates whether edge (value=4) or level triggered (value=3) interrupts occur. 1 - Other 2 - Unknown 3 - Level 4 - Edge 88 CIM_LogicalElement uint16 Table 3-40. CIM_IRQ Properties (continued) Class Name: CIM_IRQ Parent Class: CIM_SystemResource Property Description Shareable Indicates whether the IRQ can be shared. Boolean A value of TRUE indicates that the IRQ can be shared. Hardware Indicates whether the interrupt is hardware- or Boolean software-based. (A value of TRUE indicates that the interrupt is hardware based.) On a personal computer, a hardware IRQ is a physical wire to a programmable interrupt controller (PIC) chip set through which the microprocessor can be notified of time critical events. Some IRQ lines are reserved for standard devices such as the keyboard, diskette drive, and the system clock. A software interrupt is a programmatic mechanism to allow an application to get the attention of the processor. Data Type CIM_MemoryMappedIO CIM_ManagedSystemElement CIM_LogicalElement CIM_SystemResource CIM_MemoryMappedIO The CIM_MemoryMappedIO class explained in Table 3-41 addresses both memory and port I/O resources for personal computer architecture memory mapped I/O. CIM_LogicalElement 89 Table 3-41. CIM_MemoryMappedIO Properties Class Name: CIM_MemoryMappedIO Parent Class: CIM_SystemResource Property Description Data Type CSCreationClassName See Table 1-1. string CSName See Table 1-1. string CreationClassName See Table 1-1. string StartingAddress Identifies the starting address of memory mapped I/O. uint64 EndingAddress Identifies the ending address of memory mapped I/O. uint64 MappedResource Indicates the type of memory mapped I/O. uint16 MappedResource defines whether memory or I/O is mapped, and for I/O, whether the mapping is to a memory or a port space. Memory mapped I/O values are as follows: 1 - Other 2 - Mapped memory 3 - I/O mapped to memory space 4 - I/O mapped to port space CIM_DMA CIM_ManagedSystemElement CIM_LogicalElement CIM_SystemResource CIM_DMA The CIM_DMA class explained in Table 3-42 contains DMA information. A DMA channel allows certain types of data transfer between RAM and a device to bypass the microprocessor. 90 CIM_LogicalElement Table 3-42. CIM_DMA Properties Class Name: CIM_DMA Parent Class: CIM_SystemResource Property Description Data Type CSCreationClassName See Table 1-1. string CSName See Table 1-1. string CreationClassName See Table 1-1. string DMAChannel Identifies a part of the object’s key value, the DMA channel number. uint32 Availability Indicates the availability of the DMA. Values for the Availability property are as follows: uint16 1 - Other 2 - Unknown 3 - Available 4 - In use/not available 5 - In use and available/shareable CIM_RedundancyGroup CIM_ManagedSystemElement CIM_LogicalElement CIM_RedundancyGroup The CIM_RedundancyGroup class explained in Table 3-43 is a set of components that provide more instances of a critical component than are required for the system’s operation. The extra components are used in case of critical component failure. For example, multiple power supplies allow a working power supply to take over when another power supply has failed. CIM_LogicalElement 91 Table 3-43. CIM_RedundancyGroup Properties Class Name: CIM_RedundancyGroup Parent Class: CIM_LogicalElement Property Description Data Type CreationClassName See Table 1-1 string Name Serves as the key for the redundancy group’s instance in an enterprise environment. string RedundancyStatus Provides information on the state of the redundancy uint16 group. Values for the RedundancyStatus property are as follows: 0 - Unknown 1 - Other 2 - Fully redundant. Fully redundant means that all of the configured redundancy is still available. 3 - Degraded redundancy. Degraded redundancy means that some failures have been experienced but some reduced amount of redundancy is still available. 4 - Redundancy lost. Redundancy lost means that a sufficient number of failures have occurred so that no redundancy is available and the next failure experienced will cause overall failure. CIM_ExtraCapacityGroup CIM_ManagedSystemElement CIM_LogicalElement CIM_RedundancyGroup CIM_ExtraCapacityGroup The CIM_ExtraCapacityGroup class explained in Table 3-44 applies to systems that have more capability and components than are required for normal operation, for example, systems that have extra fans or power supplies. 92 CIM_LogicalElement Table 3-44. CIM_ExtraCapacityGroup Properties Class Name: CIM_ExtraCapacityGroup Parent Class: CIM_RedundancyGroup Property Description Data Type MinNumberNeeded Specifies the smallest number of elements that must uint32 be operational in order to have redundancy. For example, in an N+1 redundancy relationship, the MinNumberNeeded property should be set to N. DELL_PSRedundancyGroup CIM_ManagedSystemElement CIM_LogicalElement CIM_RedundancyGroup CIM_ExtraCapacityGroup DELL_PSRedundancyGroup The DELL_PSRedundancyGroup described in Table 3-45 is a Dell-specific extension of the CIM_PowerSupply class. The DELL_PSRedundancyGroup class defines what constitutes power supply redundancy in a system. Table 3-45. DELL_PSRedundancyGroup Properties Class Name: DELL_PSRedundancyGroup Parent Class: CIM_ExtraCapacityGroup CIM_LogicalElement 93 DELL_FanRedundancyGroup CIM_ManagedSystemElement CIM_LogicalElement CIM_RedundancyGroup CIM_ExtraCapacityGroup DELL_FanRedundancyGroup The DELL_FanRedundancyGroup described in Table 3-46 defines what constitutes fan redundancy in a system. Table 3-46. DELL_FanRedundancyGroup Properties Class Name: DELL_FanRedundancyGroup Parent Class: CIM_ExtraCapacityGroup CIM_EnabledLogicalElement Group CIM_ManagedSystemElement CIM_LogicalElement CIM_EnabledLogicalElement The CIM_EnabledLogicalElementGroup class described in Table 3-47 extends the CIM_LogicalElementGroup class to abstract the concept of an element that is enabled or disabled, such as a LogicalDevice or ServiceAccessPoint. Table 3-47. CIM_EnabledLogicalElementGroup Properties Class Name: CIM_EnabledLogicalElementGroup Parent Class: CIM_LogicalElementGroup 94 CIM_LogicalElement CIM_ServiceAccessPoint CIM_ManagedSystemElement CIM_LogicalElement CIM_EnabledLogicalElement CIM_ServiceAccessPoint The CIM_ServiceAccessPointGroup class described in Table 3-48 represents the ability to utilize or invoke a service. Access points indicate that a service is available to other entities for use. Table 3-48. CIM_ServiceAccessPointGroup Properties Class Name: CIM_ServiceAccessPointGroup Parent Class: CIM_EnabledLogicalElement CIM_RemoteServiceAccessPoint CIM_ManagedSystemElement CIM_LogicalElement CIM_EnabledLogicalElement CIM_ServiceAccessPoint CIM_RemoteServiceAccessPoint The CIM_RemoteServiceAccessPointGroup class identified in Table 3-49 describes the accessing and addressing of information for a remote connection that is known to a local network element. This information is contained in the local network element since this is the context in which it is remote. The relevance of the remote service access point and information on its use are described by subclassing or associating to the CIM_RemoteServiceAccessPointGroup class. CIM_LogicalElement 95 Table 3-49. CIM_RemoteServiceAccessPointGroup Properties Class Name: CIM_RemoteServiceAccessPointGroup Parent Class: CIM_ServiceAccessPointGroup Property Description AccessInfo Describes accessing or addressing of information for string a remote connection. This can be a host name, network address, and other similar information. InfoFormat uint16 Indicates an enumerated integer describing the format and interpretation of the AccessInfo property. This property can have the following values: 1 - Other 2 - Host Name 3 - Ipv4 Address 4 - Ipv6 Address 5 - IPX Address 6 - DECnet Address 7 - SNA Address 8 - Autonomous System Number 9 - MPLS Label 10..99 - DMTF Reserved 100 - Dial String 101 - Ethernet Address 102 - Token Ring Address 103 - ATM Address 104 - Frame Relay Address 105..199 - DMTF Reserved 200 - URL 32768..65535 - Vendor Specific 96 CIM_LogicalElement Data Type DELL_RemoteServiceAccessPort CIM_ManagedSystemElement CIM_LogicalElement CIM_EnabledLogicalElement CIM_ServiceAccessPoint CIM_RemoteServiceAccessPoint DELL_RemoteServiceAccessPort The DELL_RemoteServiceAccessPortGroup class described in Table 3-50 is an extended class of the CIM_RemoteServiceAccessPointGroup class. The DELL_RemoteServiceAccessPortGroup class provides information about Dell implementation-specific attributes. Table 3-50. DELL_RemoteServiceAccessPortGroup Properties Class Name: DELL_RemoteServiceAccessPortGroup Parent Class: CIM_RemoteServiceAccessPointGroup Property Description Data Type PortName Displays the name of the service access port. string VersionString Indicates the version of the access point service. string RemoteAccessType Indicated the type of remote access service. This property can have the following values: uint16 0 - BMC 8 - IMC 9 - CMC 10 - iDRAC6 11 - iDRAC6 for modular systems 13 - BMC CIM_LogicalElement 97 98 CIM_LogicalElement Dell-Defined Classes The Dell-defined classes are defined and populated by Dell™ rather than by CIM. None of these classes have a parent class and are on the same level as CIM_ManagedSystemElement. For information on how the logs are formatted, see Table 2-5. DELL_EsmLog CIM_ManagedSystemElement DELL_EsmLog The DELL_EsmLog class described in Table 4-1 records failure threshold violations collected by Server Administrator’s embedded server management (ESM) capabilities. Table 4-1. DELL_EsmLog Properties Class Name: DELL_EsmLog Parent Class: None Property Description Data Type recordNumber Provides an index to the ESM table. uint32 logRecord Provides the ESM message content. string eventTime Indicates the time that the message is generated. datetime status Indicates the severity of the event that caused the log string to be generated. Dell-Defined Classes 99 DELL_PostLog CIM_ManagedSystemElement DELL_PostLog The DELL_PostLog identified in Table 4-2 is a record of the system’s power-on self-test (POST). When you turn on a system, the POST tests various system components, such as random-access memory (RAM), the hard drives, and the keyboard. Table 4-2. DELL_PostLog Properties Class Name: DELL_PostLog Parent Class: None DELL_CMApplication NOTE: Dell-updateable components, such as BIOS and FW, are considered applications. CIM_ManagedSystemElement DELL_CMApplication The DELL_CMApplication class identified in Table 4-3 contains information related to the Dell Change Management applications. 100 Dell-Defined Classes Table 4-3. DELL_CMApplication Properties Class Name: DELL_CMApplication Parent Class: None Property Description Data Type componentType Defines the application type string subComponentID Defines an application string string version Indicates the current version of the application string name Indicates the name of the application string deviceKey Indicates the device key of the application string DELL_CMDevice CIM_ManagedSystemElement DELL_CMDevice The DELL_CMDevice identified in Table 4-4 contains information related to the Dell Change Management device. Table 4-4. DELL_CMDevice Properties Class Name: DELL_CMDevice Parent Class: None Property Description Data Type componentID Defines a component string string name Indicates the name of the device string vendorID Defines an ID for vendor supplying the device string Dell-Defined Classes 101 Table 4-4. DELL_CMDevice Properties (continued) Class Name: DELL_CMDevice Parent Class: None Property Description Data Type subVendorID Defines an ID for an additional vendor supplying the device string deviceID Indicates the ID of the device string subDeviceID Indicates the ID for additional device string bus Indicates the PCI bus number string device Indicates the PCI device number string function Indicates the PCI Function number string DELL_CMDeviceApplication CIM_ManagedSystemElement DELL_CMDeviceApplications The DELL_CMDeviceApplication class identified in Table 4-5 contains information related to the Dell Change Management association between the device and application. Table 4-5. DELL_CMDeviceApplication Properties Class Name: DELL_CMDeviceApplication Parent Class: None Property Description Data Type antecedent Refers to the device string dependent Refers to the application string 102 Dell-Defined Classes DELL_CMInventory CIM_ManagedSystemElement DELL_CMInventory The DELL_CMInventory identified in Table 4-6 contains information related to the Dell Change Management inventory. .. Table 4-6. DELL _CMInventory Properties Class Name: DELL_CMInventory Parent Class: None Property Description Data Type local Indicates the locale of the system string schemaVersion Indicates the Inventory schema implemented by the system string systemID Defines the System ID string DELL_CMOS CIM_ManagedSystemElement DELL_CMOS The DELL_CMOS class identified in Table 4-7 contains information related to the Dell Change Management operating system. Dell-Defined Classes 103 Table 4-7. DELL_CMOS Properties Class Name: DELL_CMOS Parent Class: None Property Description Data Type architecture Indicates the architecture of the operating system string vendor Indicates the vendor of the operating system string majorVersion Indicates the major version of the operating system string minorVersion Indicates the minor version of the operating system string spMajorVersion Indicates the current service pack number for the operating system’s major version string spMinorVersion Indicates the current service pack number for the operating system’s minor version string DELL_CMProductInfo CIM_ManagedSystemElement DELL_CMProductInfo The DELL_CMProductInfo identified in Table 4-8 contains information related to the Dell Change Management product. 104 Dell-Defined Classes Table 4-8. DELL_CMProductInfo Properties Class Name: DELL_CMProductInfo Parent Class: None Property Description Data Type name Indicates the name of the product string description Provides a short description of the product string vendor Indicates the name of the product manufacturer string version Indicates the current version number of the product string DELL_BIOSExtensions The DELL_BIOSExtensions identified in Table 4-9 contain information related to the specific extension of the data attributes on your system. Table 4-9. DELL_BIOSExtensions Properties Class Name: DELL_BIOSExtensions Parent Class: CIM_ManagedSystemElement Property Description Data Type systemBIOSCharacteristics Indicates the characteristics of BIOS on your system uint64 systemBIOSCharacteristicsExt1 Indicates the specifc extension of the data attributes on your system uint8 systemBIOSCharacteristicsExt2 Indicates the specific extension of the data attributes on your system uint8 Dell-Defined Classes 105 Management Object File For Change Management This section shows the Management Object File (MOF) invcim.mof. #pragma classflags("forceupdate") #pragma namespace("\\\\.\\Root\\CIMV2") [Locale(1033) : ToInstance] Instance of __Namespace { Name = "Dell"; }; #pragma namespace ("\\\\.\\Root\\CIMV2\\Dell") //************************************** //***Registers omprov Win32 Provider *** //************************************** instance of __Win32Provider as $P { Name = "omprov"; ClsId = "{EF6540AC-870F-445c-9401-10AAADB45CCF}"; HostingModel = "NetworkServiceHost"; }; instance of __InstanceProviderRegistration { Provider = $P; SupportsGet = "TRUE"; SupportsPut = "FALSE"; SupportsDelete = "FALSE"; 106 Dell-Defined Classes SupportsEnumeration = "TRUE"; }; instance of __MethodProviderRegistration { Provider = $P; }; //core.mof //===================================== // Using my own MOF instead of inheriting from existing MOFs, for rapid prototyping. // ===================================== [Dynamic, Provider ("omprov"), Description("The Dell_CMDevice class contains all the information related to the Dell Change Management Device.") ] class Dell_CMDevice { [write (true), key: ToSubClass] string componentID; [write (true), key: ToSubClass] string name; [write (true), key: ToSubClass] string vendorID; [write (true), key: ToSubClass] string deviceID; [write (true), key: ToSubClass] string subDeviceID; Dell-Defined Classes 107 [write (true), key: ToSubClass] string subVendorID; [write (true), key: ToSubClass] string bus; [write (true), key: ToSubClass] string device; [write (true), key: ToSubClass] string function; }; [Dynamic, Provider ("omprov"), Description("The Dell_CMInventory class contains all the information related to the Dell Change Management Inventory.") ] class Dell_CMInventory { [write (true), key: ToSubClass] string local; [write (true), key: ToSubClass] string schemaVersion; [write (true), key: ToSubClass] string systemID; }; [Dynamic, Provider ("omprov"), Description("The Dell_CMProductInfo class contains all the information related to the Dell Change Management Product.") ] class Dell_CMProductInfo 108 Dell-Defined Classes { [write (true), key: ToSubClass] string name; [write (true), key: ToSubClass] string description; [write (true), key: ToSubClass] string vendor; [write (true), key: ToSubClass] string version; }; [Dynamic, Provider ("omprov"), Description("The Dell_CMOS class contains all the information related to the Dell Change Management operating system.") ] class Dell_CMOS { [write (true), key: ToSubClass] string vendor; [write (true), key: ToSubClass] string majorVersion; [write (true), key: ToSubClass] string minorVersion; [write (true), key: ToSubClass] string spMajorVersion; [write (true), key: ToSubClass] string spMinorVersion; [write (true), key: ToSubClass] string architecture; Dell-Defined Classes 109 }; [Dynamic, Provider ("omprov"), Description("The Dell_CMApplication class contains all the information related to the Dell Change Management Application.") ] class Dell_CMApplication { [write (true), key: ToSubClass] string componentType; [write (true), key: ToSubClass] string subComponentID; [write (true), key: ToSubClass] string version; [write (true), key: ToSubClass] string name; [write (true), key: ToSubClass] string deviceKey; }; [Association, Dynamic, Provider ("omprov"), Description("The Dell_CMDeviceApplication class contains all the information related to the Dell Change Management association between the device and the application (1:n).") ] class Dell_CMDeviceApplication { [key, Override ("Antecedent"), Description ("The Device.") ] 110 Dell-Defined Classes Dell_CMDevice REF Antecedent; [key, Override ("Dependent"), Description ("The Application") ] Dell_CMApplication REF Dependent; }; // ===== // end of file // ===== Classes for Power Management The new classes introduced for power management are: // ================================================== // DELL_PowerConsumptionAmpsSensor // ================================================== [Dynamic, Provider ("dccim32"), Description ( "Monitors the power consumption") ] class DELL_PowerConsumptionAmpsSensor : CIM_NumericSensor { [Override("SensorType") ] uint16 SensorType = 4; [Override("BaseUnits") ] uint16 BaseUnits = 6; Dell-Defined Classes 111 [Override("UnitModifier") ] sint32 UnitModifier = -1; [Override("RateUnits") ] uint16 RateUnits = 0; [Override ("CurrentReading"), // Override is used to define the MappingString qualifier MappingStrings {"MIF.DMTF|Electrical Current Probe|001.5"} ] sint32 CurrentReading; [Override ("NominalReading"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.6"} ] sint32 NominalReading; [Override ("NormalMax"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.7"} ] sint32 NormalMax; 112 Dell-Defined Classes [Override ("NormalMin"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.8"} ] sint32 NormalMin; [Override ("MaxReadable"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.9"} ] sint32 MaxReadable; [Override ("MinReadable"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.10"} ] sint32 MinReadable; [Override ("Resolution"), Units ("Tenths of MilliAmps"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.17"} ] uint32 Resolution; [Override ("Tolerance"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.18"} Dell-Defined Classes 113 ] sint32 Tolerance; [Override ("Accuracy"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.19"} ] sint32 Accuracy; [read, write,MappingStrings {"MIF.DMTF|Electrical Current Probe|001.11"} ] sint32 LowerThresholdNonCritical; [read, write,MappingStrings {"MIF.DMTF|Electrical Current Probe|001.12"} ] sint32 UpperThresholdNonCritical; [read,MappingStrings {"MIF.DMTF|Electrical Current Probe|001.13"} ] sint32 LowerThresholdCritical; [Override ("UpperThresholdCritical"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.14"} ] 114 Dell-Defined Classes sint32 UpperThresholdCritical; [Override ("LowerThresholdFatal"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.15"} ] sint32 LowerThresholdFatal; [Override ("UpperThresholdFatal"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.16"} ] sint32 UpperThresholdFatal; }; // ================================================== // DELL_PowerConsumptionWattsSensor // ================================================== [Dynamic, Provider ("dccim32"), Description ( "Monitors the power consumption") ] class DELL_PowerConsumptionWattsSensor : CIM_NumericSensor { [Override("SensorType") ] uint16 SensorType = 4; Dell-Defined Classes 115 [Override("BaseUnits") ] uint16 BaseUnits = 7; [Override("UnitModifier") ] sint32 UnitModifier = 0; [Override("RateUnits") ] uint16 RateUnits = 0; [Override ("CurrentReading"), // Override is used to define the MappingString qualifier MappingStrings {"MIF.DMTF|Electrical Current Probe|001.5"} ] sint32 CurrentReading; [Override ("NominalReading"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.6"} ] sint32 NominalReading; [Override ("NormalMax"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.7"} 116 Dell-Defined Classes ] sint32 NormalMax; [Override ("NormalMin"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.8"} ] sint32 NormalMin; [Override ("MaxReadable"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.9"} ] sint32 MaxReadable; [Override ("MinReadable"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.10"} ] sint32 MinReadable; [Override ("Resolution"), Units ("Tenths of MilliAmps"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.17"} ] uint32 Resolution; Dell-Defined Classes 117 [Override ("Tolerance"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.18"} ] sint32 Tolerance; [Override ("Accuracy"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.19"} ] sint32 Accuracy; [read, write,MappingStrings {"MIF.DMTF|Electrical Current Probe|001.11"} ] sint32 LowerThresholdNonCritical; [read, write,MappingStrings {"MIF.DMTF|Electrical Current Probe|001.12"} ] sint32 UpperThresholdNonCritical; [read,MappingStrings {"MIF.DMTF|Electrical Current Probe|001.13"} ] sint32 LowerThresholdCritical; 118 Dell-Defined Classes [Override ("UpperThresholdCritical"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.14"} ] sint32 UpperThresholdCritical; [Override ("LowerThresholdFatal"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.15"} ] sint32 LowerThresholdFatal; [Override ("UpperThresholdFatal"), MappingStrings {"MIF.DMTF|Electrical Current Probe|001.16"} ] sint32 UpperThresholdFatal; }; // ================================================== // DELL_PowerConsumptionData // ================================================== [Dynamic, Provider ("dccim32"), Description ( "Dell Power Consumption Data includes, but is not limited to Cumulative power consumption from a start time, and peak values registered during a time period. ") ] Dell-Defined Classes 119 class DELL_PowerConsumptionData : CIM_LogicalDevice { [Description ( "total power consumed from a start time") ] uint32 cumulativePowerReading; [Description ( "The time from which the power reading is accumulated") ] datetime cprStartTime; [Description ( "Peak amperage reading") ] unint16 peakAmpReading; [Description ( "The time from which the peak amp reading is being monitored") ] datetime parStartTime; [Description ( "The time of the peak amp reading") ] 120 Dell-Defined Classes datetime parTime; [Description ( "Peak wattage reading") ] unint16 peakWattReading; [Description ( "The time from which the peak watt reading is being monitored") ] datetime pwrStartTime; [Description ( "The time of the peak watt reading") ] datetime pwrTime; [Description ( "function to be used to reset the peak readings") ] uint32 ResetCounters([IN]sint32 counter); }; // ================================================== // DELL_AssociatedSupplyPCAmps Dell-Defined Classes 121 // ================================================== [Association, Description ( "A PowerConsumptionAmpsSensor associated with a CIM_PowerSupply which is defined by this class.") ] class DELL_AssociatedSupplyPCAmps : CIM_Dependency { [Override ("Antecedent"), Description ("The PowerSupply instance.") ] CIM_PowerSupply REF Antecedent; [Override ("Dependent"), Description ( "The PowerConsumptionAmpsSensor associated with the CIM_PowerSupply.") ] DELL_PowerConsumptionAmpsSensor REF Dependent; }; // ================================================== // DELL_AssociatedSystemPCWatts // ================================================== [Association, Description ( 122 Dell-Defined Classes "A PowerConsumptionWattsSensor associated with a DELL_System which is defined by this class.") ] class DELL_AssociatedSystemPCWatts: CIM_Dependency { [Override ("Antecedent"), Description ("The DELL_System instance.") ] DELL_System REF Antecedent; [Override ("Dependent"), Description ( "The PowerConsumptionWattsSensor associated with the system.") ] DELL_PowerConsumptionWattsSensor REF Dependent; }; // ================================================== // AssociatedSystemPCData // ================================================== [Association, Description ( "A PowerConsumptionData associated with a DELL_System which is defined by this class.") ] class DELL_AssociatedSystemPCData: CIM_Dependency Dell-Defined Classes 123 { [Override ("Antecedent"), Description ("The DELL_System instance.") ] DELL_System REF Antecedent; [Override ("Dependent"), Description ( "The PowerConsumptionData associated with the PowerSupply.") ] DELL_PowerConsumptionData REF Dependent; }; // ================================================== // DELL_BIOSSettings // ================================================== [Dynamic, Provider("dccim32"): ToInstance, Description ( "This class defines properties used for setting parameters in the DellSystem Management BIOS."), DisplayName("BIOS Settings")] class DELL_BIOSSettings : CIM_ManagedSystemElement { [key, read, Description( "This property defines the instance ID of this class."), DisplayName("Dell Instance ID")] 124 Dell-Defined Classes uint32 DellInstanceID; [read, Description ( "Enables or Disables the Trusted Platform Module (TPM)."), DisplayName("TPM Security"), ValueMap{"0", "1", "2", "3", "4"}, Values{"Other", "Unsupported", "Off", "On with BIOS Measurement", "On without BIOS Measurement" }] uint8 TrustedPlatformModule; }; Dell-Defined Classes 125 126 Dell-Defined Classes CIM_Dependency The CIM_Dependency class is an association used to establish dependency relationships between two managed system elements. CIM_Dependency shown in Figure 5-1 does not have a parent class because it is a relationship or association between two elements. Figure 5-1. CIM_Dependency Class Structure CIM_ManagedSystemElement CIM_Dependency DELL_FanSensor CIM_PackageTempSensor CIM_PackageVoltSensor CIM_PackageCurrentSensor CIM_PackageFanSensor CIM_PackagePowerSupplySensor DELL_PackagePSRedundancy DELL_PS Redundancy Each class derived from CIM_Dependency has an element called an antecedent that represents the independent object in this association, and another element called a dependent that represents the object that is dependent on the antecedent. For example, consider two managed system elements: Chassis1 and PowerSupply3. Chassis1 is the antecedent element because a managed power supply would always be either contained in, or grouped with, a chassis. CIM_Dependency 127 DELL_FanSensor CIM_ManagedSystemElement CIM_Dependency DELL_FanSensor The DELL_FanSensor class described in Table 5-1 defines a Dell-specific association between a fan and a sensor. The CIM_PackageFanSensor class contains fans that assist in cooling the entire package as opposed to a fan that is dedicated to cooling only some of the components in the package. Table 5-1. DELL_FanSensor Properties Class Name: DELL_FanSensor Parent Class: CIM_Dependency Element Description Antecedent CIM_Tachometer refers to the tachometer (fan sensor) that measures the RPM of the fan. Dependent CIM_Fan refers to the fan whose revolutions are measured by the tachometer. CIM_PackageTempSensor CIM_ManagedSystemElement CIM_Dependency CIM_PackageTempSensor The CIM_PackageTempSensor class listed in Table 5-2 contains temperature sensors that are often installed in a package such as a chassis or a rack to assist in the monitoring of the package in general. This relationship is described by the CIM_PackageTempSensor association. 128 CIM_Dependency Table 5-2. CIM_PackageTempSensor Properties Class Name: CIM_PackageTempSensor Parent Class: CIM_Dependency Element Description Antecedent CIM_TempSensor refers to the temperature sensor for the package. Dependent CIM_PhysicalPackage refers to the physical package whose environment is being monitored. CIM_PackageVoltSensor CIM_ManagedSystemElement CIM_Dependency CIM_PackageVoltSensor The CIM_PackageVoltSensor identified in Table 5-3 contains voltage sensors that are often installed in a package such as a chassis or a rack to assist in the monitoring of the package in general. This relationship is described by the CIM_PackageVoltSensor association. Table 5-3. CIM_PackageVoltage Properties Class Name: CIM_PackageVoltSensor Parent Class: CIM_Dependency Element Description Antecedent CIM_PackageVoltSensor refers to the voltage sensor for the package. Dependent CIM_PhysicalPackage refers to the physical package whose voltages are being monitored. CIM_Dependency 129 CIM_PackageCurrentSensor CIM_ManagedSystemElement CIM_Dependency CIM_PackageCurrentSensor The CIM_PackageCurrentSensor shown in Table 5-4 contains amperage sensors that are often installed in a package such as a chassis or a rack to assist in the monitoring of the package in general. This relationship is described by the CIM_PackageCurrentSensor association. Table 5-4. CIM_PackageCurrentSensor Properties Class Name: CIM_PackageCurrentSensor Parent Class: CIM_Dependency Element Description Antecedent CIM_CurrentSensor refers to the amperage sensor for the package. Dependent CIM_PhysicalPackage refers to the physical package whose amperage is being monitored. CIM_PackageFanSensor CIM_ManagedSystemElement CIM_Dependency CIM_PackageFanSensor The CIM_PackageFanSensor class described in Table 5-5 contains fan sensors that monitor the whole package. 130 CIM_Dependency Table 5-5. CIM_PackageFanSensor Properties Class Name: CIM_PackageFanSensor Parent Class: CIM_Dependency Element Description Antecedent CIM_Fan refers to the cooling device for the package. Dependent CIM_PhysicalPackage refers to the physical package whose environment is being monitored. CIM_PackagePowerSupplySensor CIM_ManagedSystemElement CIM_Dependency CIM_PackagePowerSupplySensor The CIM_PackagePowerSupplySensor class described in Table 5-6 contains power supplies that provide power to the whole package. Table 5-6. CIM_PackagePowerSupplySensor Properties Class Name: CIM_PackagePowerSupplySensor Parent Class: CIM_Dependency Element Description Antecedent CIM_PowerSupplySensor refers to the power supply sensor that monitors wattage for the entire package. Dependent CIM_PhysicalPackage refers to the package whose wattage is being monitored. CIM_Dependency 131 DELL_PackagePSRedundancy CIM_ManagedSystemElement CIM_Dependency DELL_PackagePSRedundancy The DELL_PackagePSRedundancy class listed in Table 5-7 defines what constitutes power supply redundancy for an entire package. Table 5-7. DELL_PackagePSRedundancy Properties Class Name: DELL_PackagePSRedundancy Parent Class: CIM_Dependency Element Description Antecedent DELL_PSRedundancyGroup refers to power supplies that deliver wattage for the entire package. Dependent CIM_PhysicalPackage refers to the package to which the wattage is being supplied. DELL_PSRedundancy CIM_ManagedSystemElement CIM_Dependency DELL_PSRedundancy The DELL_PSRedundancy class shown in Table 5-8 defines what constitutes power supply redundancy for Dell™ systems. 132 CIM_Dependency Table 5-8. DELL_PSRedundancy Properties Class Name: DELL_PSRedundancy Parent Class: CIM_Dependency Element Description Antecedent CIM_PowerSupplySensor refers to the power supply sensor that monitors wattage for the entire package. Dependent CIM_PhysicalPackage refers to the package whose wattage is being monitored. CIM_Dependency 133 134 CIM_Dependency Glossary The following list defines or identifies technical terms, abbreviations, and acronyms used in user documents. asset tag code An individual code assigned to a computer, usually by a system administrator, for security or tracking purposes. attribute An attribute, or property, contains a specific piece of information about a manageable component. For example, a component can have attributes for settings, capabilities, and status. CIM Acronym for Common Information Model, which is a model for describing management information from the DMTF. CIM is implementation independent, allowing different management applications to collect the required data from a variety of sources. CIM includes schemas for systems, networks, applications, and devices. It provides mapping techniques for interchange of CIM data with MIB data from SNMP agents. CIMOM Acronym for common information model object manager. CI/O Acronym for comprehensive input/output. class For the purposes of the Dell™ CIM provider, a class is a set of managed system elements that can be monitored and managed using a systems management console capable of receiving CIM information. Managed system elements can have various levels of complexity, from rack systems containing multiple servers and storage systems, to individual fans, power supplies, processors, and chips. Physical objects that contain systems can be associated with the CIM_PhysicalPackage class. Managed objects of intermediate complexity can be represented by such classes as CIM_SoftwareElement or CIM_PowerSupplyRedundancy. Simple managed system elements can be represented by classes such as CIM_Processor. Glossary 135 component Manageable components are operating systems, computer systems, expansion cards, or peripherals that are compatible with a systems management standard such as CIM and SNMP. Each component is made up of groups and attributes that are defined as relevant to that component. controller A chip that controls the transfer of data between the microprocessor and memory or between the microprocessor and a peripheral device such as a disk drive or the keyboard. DMTF Abbreviation for Distributed Management Task Force, a consortium of companies representing hardware and software providers. ix86 Variable used to represent microprocessors such as Intel® i386™, i486™, and so forth. IHV Acronym for independent hardware vendor. IHVs often develop their own SNMP MIBs for components that they manufacture. IT Assistant A comprehensive systems management application that integrates event management, configuration management, and asset management for systems distributed throughout an enterprise. MIB Acronym for management information base. A MIB is used to send detailed status/commands from or to an SNMP managed device. MOF Acronym for managed object format, which is an ASCII file that contains the formal definition of a CIM schema. NIC Acronym for network interface controller. 136 Glossary property A property is a capability or characteristic of a CIM class. The temperature probe class, for example, has a property that describes its thresholds for normal, lower critical, and upper critical ranges of operation. Defining where normal operation ends and where critical temperatures begin determines when warnings should be sent to the systems manager for corrective action. Every property has a Description and a Data Type. The Description provides a brief explanation of what a particular managed object does. The Data Type specifies the form that the values of a property must take. For example, some values are bit fields and others are integers or strings. provider A provider is an extension of a CIM schema that communicates with managed objects. The provider accesses data and generates event notifications from a variety of sources. The Dell CIM provider extends the standard CIM schema to make it easier to manage systems. MOF A MOF is a management object file that models objects in a systems management environment. The MOF models the relationships between different managed objects. For example, the CIM_RedundancyGroup is a parent class for components that are so critical to the proper functioning of a system that the system is designed to have additional critical components. When a critical component fails, redundancy allows the system to continue operation because there are other components that can compensate for the loss. The DELL_PowerSupply and DELL_FanRedundancy classes are derived from the CIM redundancy group. The relationship is one of child to parent. RAID Acronym for redundant array of independent disks. response file The file that records the features that an administrator wants to incorporate into an unattended installation is called a “response file” or an “answer file.” set operation An operation used to write or “set” data to MIB variables maintained by the SNMP agent. Glossary 137 SNMP Abbreviation for Simple Network Management Protocol. SNMP is an industrystandard interface that allows a network manager to remotely monitor and manage workstations. unattended installation An unattended installation requires far less operator involvement than an interactive installation. Also called a “silent installation,” unattended installation programs record the administrator’s preferences about which features of an application program to install. The file that records these installation feature preferences is called a “response file” or an “answer file.” System administrators typically create packages that include the response file and any other files needed to install the program, distribute the package to multiple systems, and activate the unattended installation. 138 Glossary Index C CIM classes and properties, 10 base classes, 10 classes that describe relationships, 11 common properties of classes, 12 conventions, 12 parent classes, 11 CIM_Chip, 24 CIM_Dependency CIM_PackageCurrentSensor, 130 CIM_PackageFanSensor, 130 CIM_PackagePowerSupplySensor, 131 CIM_PackageTempSensor, 128 CIM_PackageVoltSensor, 129 DELL_FanSensor, 128 DELL_PackagePSRedundancy, 1 32 DELL_PSRedundancy, 132 CIM_LogicalElement CIM_BIOSElement, 82 CIM_CacheMemory, 80 CIM_ComputerSystem, 38 CIM_Controller, 64 CIM_CoolingDevice, 57 CIM_CurrentSensor, 53 CIM_DiscreteSensor, 49 CIM_DMA, 90 CIM_ExtraCapacityGroup, 92 CIM_Fan, 58 CIM_FRU, 40 CIM_IRQ, 87 CIM_Keyboard, 61 CIM_LogicalDevice, 39 CIM_LogicalPort, 41 CIM_Memory, 79 CIM_MemoryMappedIO, 89 CIM_NumericSensor, 49 CIM_ParallelController, 65 CIM_PCIBridge, 69 CIM_PCIController, 67 CIM_PointingDevice, 59 CIM_PowerSupply, 62 CIM_Processor, 70 CIM_RedundancyGroup, 91 CIM_Sensor, 40, 47 CIM_SerialController, 66 CIM_SoftwareElement, 82 CIM_SoftwareFeature, 85-86 CIM_System, 37 CIM_SystemResource, 86 CIM_Tachometer, 55 CIM_TemperatureSensor, 52 CIM_UserDevice, 59 CIM_VoltageSensor, 54 CIM_Watchdog, 56 DELL_FanExtraCapacityGroup, 94 DELL_NetworkPort, 43 DELL_PSRedundancyGroup, 93 DELL_System, 38 Index 139 CIM_PhysicalComponent, 24 DELL_CMProductInfo, 104 CIM_PhysicalElememt CIM_PhysicalConnector, 28 CIM_PhysicalMemory, 26 DELL_EsmLog, 99 CIM_PhysicalElement, 17 CIM_Chassis, 21 CIM_Chip, 24 CIM_PhysicalComponent, 24 CIM_PhysicalFrame, 20 CIM_PhysicalPackage, 19 CIM_Slot, 31 DELL_Chassis, 22 structure of, 17 DELL_PostLog, 100 CIM_PhysicalElementClass structure of, 17 DELL_ManagedSystemServices Device, 43 DELL_PSRedundancy, 132 description, 15 P parent class, 15 property, 15 CIM_SoftwareElement, 82 S class name, 15 Server Administrator 1.0, 9 common properties of classes, 12 current reading, 12 version, 14 D data type, 15 Dell OpenManage Server Agent, 9 DELL_CMApplication, 100 DELL_CMDevice, 101 DELL_CMDeviceApplication, 1 02 DELL_CMInventory, 103 DELL_CMOS, 103 140 V Index