Download Dacor Food Warmer MRWD User's Manual
Transcript
EWD, IWD, MWDV, MWDH, MRWD, PWD Warming Drawers Revised 06/03/08 24”, 27”, 30”, 36” Wide, Warming Drawers Warming Drawer 36" Typ. (914 mm) Warming Drawer C 1/2 3/4" Min.* (19 mm) 27"/30"/36" Dacor single oven D 120 Vac electrical receptacle PLANNING GUIDE C 3/4" Min.* (19 mm) Warming Drawer 120 Vac Elect. A B Warming Drawer C Warming Drawer 120 Vac Elect. 3/4” Min.* (19 mm) Toe Kick A B Model IWD24 EWD24 C 3/4" Min.* (19 mm) A 36" Typ. (914 mm) C D 1 1/2" (38 mm) Typical counter top Cooktop D 120 Vac electrical receptacle “A” Cutout Width “B” Min. Width to Adjacent Doors/Drawers 22 1/2” (572mm) 24 1/4”* (616mm) 25 1/2” (648mm) 27 1/4”* (692mm) “C” Cutout Height “D” Min. Vertical Gap Between Cutouts 9 1/8” (232mm) 1 1/16”* (27mm) EWD27 IWD27 MWDH27 MWDV27 MRWD27 PWD27 EWD30 IWD30 MWDH30 MWDV30 28 1/2” (724mm) 30 1/4”* (768mm) 34 1/4” (870mm) 36 1/4” (921mm) MRWD30 PWD30 EWD36 * EWD36 cannot be stacked. Bare minimum spacing shown allows extra space to avoid scrapping and allow for ventilation. On IWD series models, additional space may be required if an oversized drawer front is used. Use the drawer face dimensions for the corresponding EWD series model for reference. Cutouts Dimensions Cutout Depth: 24” Min. (610mm) Web: http://www.Dacor.com Corporate Phone: 800-793-0093 Specifications are subject to change without notice. See installation instructions for additional details. 2.8 3 5/16" (84mm) EWO 1" (25mm) 2 3/16" (56mm) EWD, IWD, MRWD, MWDV, MWDH, PWD Warming Drawers PWO 1" (25mm) 1 5/16" (33mm) EW MWO PW 3 7/16" (87mm) 1" (25mm) EWD 1 5/32" (29mm) 1 1/8" (29mm) MWDH/V MRWD 1" (25mm) 2 1/4" (57mm) 24”, 27”, 30”, 36” Wide, Warming Drawers 1" (25mm) Revised 06/03/08 3 7/16" (87 mm) MW 3 1/4" (83mm) 3 1/4" (83 mm) 1" (25mm) PWD 10 1/8" (257 mm) 2 1/4" (57 mm) 1" (25mm) 2/2 PLANNING GUIDE 1" (25mm) Handle Dimensions A B C Drawer Face Dimensions (MW Series Shown) 40" (1016 mm) 3 prong 120 Vac power cord Mounting Hole 9 Places Chassis 23 3/8" (594 mm) 9" (229 mm) 1/2" (13 mm) 10" (254 mm) Chassis without drawer inserted 5/64" (2mm) Drawer open 23 13/16 (605 mm) 1/2" (13 mm) Chassis Dimensions Overall Dimensions Top View (EWD Series Shown) Model EWD24 “A” Drawer Face Width “B” Chassis Face Width “C” Chassis Width 24” (610mm) 23 5/8” (600mm) 22 1/4” (565mm) 27” (686mm) 26 5/8” (676mm) 25 1/4” (641mm) 30” (762mm) 29 5/8” (752mm) 28 1/4” (718mm) 36” (914mm) 35 5/8” (905mm) 34 1/4” (870mm) EWD27 MRWD27 MWDH27 MWDV27 PWD27 EWD30 MRWD30 MWDH30 MWDV30 PWD30 EWD36 Warming Drawer Overall Dimensions Web: http://www.Dacor.com Corporate Phone: 800-793-0093 Specifications are subject to change without notice. See installation instructions for additional details. 2.9