Transcript
Technical Bulletin Bulletin No: PRO-01-15 Subject: Effective Date: 1/10/80 Cancels: NA Page: 1 of 1 TU-FLO 700 COMPRESSOR 292503 CONNECTING ROD BOLT The Tu-Flo 700 compressor connecting rod cap screw is a pointed special cap screw used to provide adequate crankcase clearance. Removal or installation of the screw requires a special socket that is available with either 1/4” or 3/8” drives. Socket part numbers are as follows: 1/4” square drive – Part TX-1E10 3/8” square drive – Part TX-3E10 We understand that these sockets are available from “Snap-On” Tools or, if unavailable from this source, contact: The Apex Machine & Tool Company 1025 S. Patterson Boulevard P. O. Box 952 Dayton, Ohio 45401 Phone: (a/c 513) 222-7871