Transcript
Technical Specifications VFS-DH Freestanding l Double Horizontal General Features Display Compatibility: Visidec Freestanding Double Horizontal is compatible with Flat Panel Displays measuring up to 635mm (25”) wide, with either 75mm x 75mm or 100mm x 100mm VESA mounting hole patterns. 3 Display Weight Compatibility: Each Quickshift Donut supports a maximum weight of 12kg (26.5lbs) Cable Management: Cable Slot, Cable Clips and Cable Balls (included in package) 4 Colour Options: - Pole available in Matt Silver Anodised only. - Quickshift Donut available in Black only. - Base available in Black/Silver only. 2 Warranty: 10 years limited 1 1 Vertical height adjustment 2 Horizontal adjustment 3 360°Portrait/Landscape adjustment 4 ±20° Pan/Tilt adjustment Overall Dimensions 682mm (27”) 89mm (3.5”) 42mm (1.65”) 42mm (1.65”) 475mm (18.70”) Note: This product supports a maximum width (from edge to edge) of up to 635mm (25”) per display. Max Height 449mm (17.68”) 422mm (16.61”) 305mm 12” Base Dimensions VESA Display Mounting Options Choose the correct Mounting Screws supplied in the Hardware box and attach the display as shown. 100mm 75mm 305mm (12”) 302mm (12”) 222mm (8.75”) 75mm 100mm 422mm (16.61”) No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 02.02.12 C