Download American Dryer Corp. AD-75THS User's Manual
Transcript
AD-75THS Parts Manual American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] 031099MFM/cj ADC Part No. 450416 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. AD-75THS __________________________________________ RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Control Door Assembly Without Trim ...................................................................................................... 2 Control Door Assembly With Trim .......................................................................................................... 3 Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 4 Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5 Phase 5 Coin and OPL Microprocessor Control Box Assembly ............................................................... 6 Coin Vault Assembly ............................................................................................................................... 7 Dual Timer Control Panel Assembly .................................................................................................... 8, 9 Dual Timer Control Box Assembly ........................................................................................................ 10 Front Panel Assembly ........................................................................................................................... 11 Main Door Assembly ............................................................................................................................ 12 Main Door Switch Housing ................................................................................................................... 13 Basket (Tumbler)/Support Assemblies ............................................................................................. 14, 15 Drop Lint Door Assembly Without Trim ................................................................................................ 16 Drop Lint Door Assembly With Trim ..................................................................................................... 17 Lint Trap Assembly ............................................................................................................................... 18 Idler Bearing Assembly ......................................................................................................................... 19 Tumbler Bearing Assembly .............................................................................................................. 20, 21 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ........................... 22, 23 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for ALL Gas and Electric Models ONLY .................................................................................. 24, 25 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for Steam Models ONLY ......................................................................................................... 26, 27 Sensor Bracket Assemblies ............................................................................................................. 28, 29 Hot Surface Ignition (HSI) Burner Assembly ................................................................................... 30, 31 Electric Oven Assembly .................................................................................................................. 32, 33 Electric Oven Component Application Chart ......................................................................................... 34 Sail Switch Assembly ............................................................................................................................ 35 Non-Reversing Electric Relay Panel Assembly ....................................................................................... 36 Microprocessor Reversing Rear Control Box Assembly ......................................................................... 37 Air Operated Steam Damper Assembly ........................................................................................... 38, 39 Dual Timer Reversing Rear Control Box Assembly ................................................................................ 40 Outer Top/Back Guard Assemblies for Gas and Electric Models ONLY ................................................................................................ 41 Back Guard Assembly for Steam Models ONLY ............................................................................................................... 42 Coin Acceptors Listing .......................................................................................................................... 43 Transformer Usage Listing for Electric Models ONLY .............................................................................................................. 44 Step Down Transformer Usage Listing ................................................................................................. 45 Additional Parts Available ..................................................................................................................... 46 2 Control Door Assembly Without Trim Illus. No. 1 2 3 4 5 6 7 8 Part No. Qty. 882052 870011 881045* 1 1 1 881046 1 117604 150300 102600 102601 102502 160005 4 4 1 1 1 2 Description ADC Logo ONLY Logo Double Adhesive Tape Kit ONLY Control Door (includes illus. nos. 2 and 3) Stainless Steel Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Retainer Clip Control Door Rod Turn Latch * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Control Door Assembly With Trim Illus. No. Part No. Qty. 1 160015 1 160017 1 160104 160016 882052 870011 800020* 1 1 1 1 1 800144 1 180202 117603 150201 150309 102600 102601 102502 1 3 6 4 1 1 1 2 3 4 5 6 7 8 9 10 11 3 Description High Security MK-100 Lock Assembly with Key (for Coin Models Only) Special Dummy Lock ONLY (for non-Coin Models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo ONLY Logo Double Tape Kit High Security Control Door Assembly (includes illus. nos. 4 through 7) Stainless Steel High Security Control Door Assembly (includes illus. nos. 4 through 7) Top Trim Strip (Gray) with Lock Hole (38-1/4” length) Suppressor Tape/Gasket (sold by the foot) #10-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod * Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 4 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 112275 1 1 1 112277 1 112278 1 801255 801256 801206 1 1 1 801207 1 137222 137231 824998 153010 150005 150429 150433 1 1 1 2 2 1 1 136048 1 2 3 4 5 6 7 Description OPL English Keyboard Label Assembly OPL Stick-on Labels (English ONLY) ... Not Illustrated OPL Stick-on Labels ... Not Illustrated (Spanish, Italian, and Hebrew) 3-Language OPL Stick-on Labels ... Not Illustrated (English, Spanish, and Hebrew) 5-Language OPL Stick-on Labels ... Not Illustrated (Italian, Dutch, French, German, and Chinese) Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” TORX Head Crimptite Screw TORX Hand Driver (for removal of TORX Head Screw) 1/8-Amp (Slo Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 112526 801213 1 1 801229 1 801259 801258 150309 137213 824998 153010 150005 -------- 1 1 1 1 1 2 2 1 137056 137023 137021* 880772 824080 122800 136048 1 1 3 1 1 1 1 3 4 5 6 7 8* 9* 10 11 Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Coin Acceptor (refer to Coin Acceptors Listing on page 43) Optic Switch ONLY Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo Blo) Fuse * For dual coin models double the quantity shown. IMPORTANT: Check label on computer chip to verify correct part number of controller (computer). Telephone: (508) 678-9000 Fax: (508) 678-9447 6 Phase 5 Coin and OPL Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 141403 1 -------- 1 150300 120715 150002 151000 136057 150301 136008 122641 122706 112801 2 1 2 2 * * * 1 * 1 2 3 4 5 6 7 8 9 10 --- Description Transformer - 24 VAC (for ALL 380/416/480 volt Gas and Steam Models) Transformer - 24 VAC (for Electric Models Only) (Refer to Transformer Usage Listing on page 44) #10 x 1/2” Hex Washer TEK Screw 30-Position Terminal Block #6-32 x 1” Phillips Round Head Screw #6-32 Pal Nut 1/2-Amp (Slo Blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY 15-Pin Microprocessor Connector Socket ONLY Pin/Socket Extraction Tool * As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 7 Coin Vault Assembly Illus. No. Part No. Qty. 1 802112 1 4 802117 160028 875061 160105* 802020 1 1 1 1 1 5 6 7 8 9 802019 125915 802018 152014 102502 102601 102600 1 1 1 4 1 1 1 2 3 Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box ONLY without Face Plate High Security (Greenwald) Coin Box ONLY with Key 1/4 Turn Coin Box Face Plate ONLY 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch * Specify key number when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 8 American Dryer Corporation Dual Timer Control Panel Assembly 88 Currant Road / Fall River, MA 02720-4781 9 Dual Timer Control Panel Assembly Illus. No. Part No. Qty. 1 2 3 123005 122400 824015 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 --- 800051 131917 150207 154001 152000 153010 120730 150002 150110 150001 131931 151000 112050 150309 124103 124025 124030 122602 122700 122801 1 1 2 2 2 2 1 2 4 2 1 2 1 1 2 1 1 1 8 1 Telephone: (508) 678-9000 Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push-to-Start Relay - 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw #6-32 x 1/2” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw) Arrow Timer Knob 60-Minute Timer - 24 VAC 15-Minute Timer - 24 VAC 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool Fax: (508) 678-9447 10 Dual Timer Control Box Assembly Illus. No. Part No. Qty. 1 2 122603 122701 122801 315010 150300 150300 141403 1 8 1 1 2 2 1 -------- 1 136008 136057 150301 150002 120715 151000 * * * 2 1 2 3 4 5 6 7 8** 9 10 11 12 Description 9-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2” Hex Washer TEK Screw #10 x 1/2” Hex Washer TEK Screw Transformer - 24 VAC (for ALL 380/416/480 volt Gas and Steam Models) Transformer - 24 VAC (for Electric Models Only) (Refer to Transformer Usage Listing on page 44) Fuse Block/Strip ONLY 1/2-Amp (Slo Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut * As required. ** Check fuse rating for verification. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 11 Front Panel Assembly Illus. No. 1 2 3 4 5 6 Part No. Qty. 875302* 1 875313 1 154215 170330 150300 150309 121405 2 1 1 8 1 Description Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) Stainless Steel Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) 5/32” Pop Rivet Friction Door Latch #10 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet * Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 12 Main Door Assembly Illus. No. Part No. Qty. 1 881421 1 2 3 4 5 6 800448 150410 152014 102349 102212 170730 150448 170319 150431 4 4 4 1 1 1 4 4 1 7 8 9 American Dryer Corporation Description Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with (4) Holes Main Door Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (Nylon) Spacer Main Door Latch Screw (#10 x 7/16” Dome Hex Head) 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Housing Illus. No. Part No. Qty. 1 2 3 4 5 6 152013 153008 137005 121028 154281 800448 2 2 1 2 2 1 7 8 9 10 153565 313218 150201 121405 2 1 2 1 Telephone: (508) 678-9000 13 Description #6-32 Hex Nut #6 Lock Washer Single-Pole Door Switch Insulated Female Terminal 3/8” Standard Nylon Spacer 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head Machine Screw Rubber Grommet Fax: (508) 678-9447 14 American Dryer Corporation Basket (Tumbler)/Support Assemblies 88 Currant Road / Fall River, MA 02720-4781 Basket (Tumbler)/Support Assemblies Illus. No. Part No. Qty. 1* 800708 800857 800816 1 1 1 800873 1 800819 1 800876 1 2 150413 150429 40 1 3 301308 301408 150500 100905 153004 800613 800615 152005 153005 153004 116000 401010 4 4 1 4 4 1 1 4 4 4 1 1 4 5 6 7 8 9 10 11 --- 15 Description Basket (Tumbler) ONLY without Felt Collar Stainless Steel Basket (Tumbler) ONLY without Felt Collar Non-Reversing Basket (Tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Non-Reversing Basket (Tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Reversing Basket (Tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Reversing Basket (Tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX Head Crimptite Screw TORX Hand Driver (for removal of TORX Head Screw) Basket (Tumbler) Rib ONLY Stainless Steel Basket (Tumbler) Rib ONLY 5/16-18 x 3/4” Socket Button Head Screw 3/8-16 x 37” Tie Rod 3/8” Flat Washer Non-Reversing Basket (Tumbler) Support ONLY Reversing Basket (Tumbler) Support ONLY 3/8” Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive For Felt Collar * Felt collar is not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 16 Drop Lint Door Assembly Without Trim Illus. No. Part No. Qty. 1 160001 160103 800150 1 1 1 160200 160003 160104 160008 160009 150425 1 1 1 1 1 1 157000 802104* 1 1 882106 1 150201 117604 150419 150418 108120 6 7 2 1 1 2 3 4 5 6 7 8 Description AD-100 Lock Assembly with Key (for Coin Models Only) AD-100 Key ONLY Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Knob Latch ONLY with 2 Screws (without cam) Dummy Lock ONLY (for Non-Coin Models) MK-100 Key ONLY (for Dummy Lock) Lock Cam for AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for Knob Latch Adjustable Cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) #6 x 1/2” Tamperproof TEK Screw Tamperproof Screw Hand Driver Chain for Drop Lint Door (10-1/2” length) * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 17 Drop Lint Door Assembly With Trim Illus. No. Part No. Qty. 1 160001 160103 800150 1 1 1 160200 160003 160104 160008 160009 150425 1 1 1 1 1 1 157000 800237* 1 1 880229 1 150201 117604 117603 180212 150419 150418 108120 6 7 3 1 2 1 1 2 3 4 5 6 7 8 9 10 Description AD-100 Lock Assembly with Key (for Coin Models Only) AD-100 Key ONLY Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Knob Latch ONLY with 2 Screws (without cam) Dummy Lock ONLY (for Non-Coin Models) MK-100 Key ONLY (for Dummy Lock) Lock Cam for AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for Knob Latch Adjustable Cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) Suppressor Tape/Gasket (sold by the foot) Mid Trim/Kick Plate - Gray (8-1/4” length) #6 x 1/2” Tamperproof TEK Screw Tamperproof Screw Hand Driver Chain for Drop Lint Door (10-1/2” length) * Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 18 Lint Trap Assembly Illus. No. Part No. Qty. 1 800420 1 2 3 4 5 6 7 - 850181 154200 304101 150300 800506 150419 108120 150418 1 7 1 3 1 2 1 1 American Dryer Corporation Description Non-Reversing and Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Non-Reversing and Reversing Lint Trap ONLY 5/32” Pop Rivet Lint Screen Holder ONLY #10 x 1/2” Hex Washer TEK Screw Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain for Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver 88 Currant Road / Fall River, MA 02720-4781 Idler Bearing Assembly Illus. No. Part No. Qty. 1 2 3 100108 101140 100117 1 1 1 100114 1 4 5 6 7 8 9 10 11 154301 100705 301850 150529 880214 153007 152002 801007 2 1 1 3 2 3 3 1 12 13 14 15 16 17 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 Telephone: (508) 678-9000 19 Description 5L-680 V-Belt (idler to basket [tumbler]) 14” x 3” Compound Pulley 4L-620 V-Belt (idler to motor) For Non-Reversing Models ONLY 4L-630 V-Belt (idler to motor) For Reversing Models ONLY 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key 5/8” x 3/4” Idler Shaft 1/4-20 x 2-1/4” Carriage Bolt 5/8” Flange Bearing 1/4” Lock Washer 1/4-20 Hex Nut Idler Bearing Assembly Complete (includes illus. nos. 5 through 17) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Fax: (508) 678-9447 20 American Dryer Corporation Tumbler Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 Tumbler Bearing Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 880220 153025 152050 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101 1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1 801103 1 17 18 801105 801104 880202 880779 1 1 1 1 19 20 21 152004 150610 101100 2 2 1 101118 1 22 101119 1 23 154301 2 24 100735 1 25 26 100108 824807 1 1 21 Description 1-3/4” Flange Bearing 9/16” Lock Washer 9/16-12 Hex Nut 3/8-16 x 3/4” Hex Head Machine Bolt 3/8” Lock Washer 3/8-16 Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 1-1/2” Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8” Bearing Box Assembly Complete (includes illus. nos. 4 through 20) For models mfd. without Rotational Sensor 1-3/8” Bearing Box and Support ONLY (includes illus. nos. 4, 5, 6, 16, and 17) 1-3/8” Bearing Box ONLY Pillow Block Bearing Support ONLY 1-3/8” Pillow Block Bearing ONLY 1-3/8” Pillow Block Bearing Assembly with Magnet (for models mfd. with Optional Rotational Sensor) 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 18” Pulley (for Non-Reversing Models Only) 18-3/4” Pulley (for Reversing Models Only) 1-3/8” Taper Lock Hub (key is not included) For Reversing Models ONLY 5/16-18 x 5/16” Allen Setscrew (for Non-Reversing Models Only) Shaft Key (for taper lock hub) For Reversing Models ONLY 5L-680 V-Belt (idler to basket [tumbler]) Rotational Sensor Assembly (for models mfd. with Optional Rotational Sensor) * As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 22 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. 1 2 3 4 5 6 7* 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Part No. Qty. 100117 100701 101133 101130 150501 153002 153001 100073 122701 122801 137030 152004 153002 153001 117604 154000 800919 803992* 1 1 1 1 4 4 4 1 8 1 1 4 4 4 4 4 1 1 803953 1 803955* 1 803958* 1 153051 100603 100714 153050 152006 120200 100075* 100076 1 1 1 2 2 1 1 1 23 Description 4L-620 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (60 Hz Only) 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 120/208/230v 1ø 60 Hz T.E.F.C. Motor with Plug (56Z frame) Socket Terminal Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Neoprene Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 1 HP 120/230v 1ø 60 Hz T.E.F.C. Motor Mount Assembly with Plug Complete (includes illus. nos. 2 through 7 and 13 through 20) 3/4 HP 230v 1ø 50 Hz Non-Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1 HP 230/380/460v 3ø 60 Hz Non-Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1 HP 230/380/460v 3ø 50 Hz Non-Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 3/4” S.A.E. Flat Washer 16” Impellor with 3/4” Bore 3/16” x 3/16” x 1-7/8” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90° Connector 1 HP 208/230/240/460v 3ø 50/60 Hz T.E.F.C. Motor 3/4 HP 230v 1ø T.E.F.C. Motor (50 Hz Only) * Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 24 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for ALL Gas and Electric Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 25 for ALL Gas and Electric Models ONLY Illus. No. Part No. Qty. 1 2 3 100114 100701 101130 101139 120200 181003 150501 153002 153001 100075 1 1 1 1 1 1 4 4 4 1 4 5 6 7 8 9* 10 11 12 13 14 15 16 17 18 120200 150501 153002 153001 154000 152004 153002 153001 800920 803952** 803987** 19 20 21 22 23 24 117604 153051 100714 100603 153050 152006 Description 4L-630 V-Belt (to idler assembly) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (60 Hz Only) 5/8” x 2-3/4” Motor Pulley (50 Hz Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 220/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor with 3/4” Shaft (56Z frame) 1 3/8” x 90° Connector 4 5/16-18 x 3/4” Hex Head Machine Bolt 4 5/16” Lock Washer 4 5/16” Flat Washer 8 5/16” Tinnerman Nut 7 5/16” Hex Nut 7 5/16” Lock Washer 7 5/16” Flat Washer 1 Reversing Motor Mount ONLY (56Z frame) 1 60 Hz Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 1 50 Hz Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 4 Neoprene Sponge Tape (sold by the foot) 1 3/4” S.A.E. Flat Washer 1 3/16” x 3/16” x 1-7/8” Key 1 16” Impellor with 3/4” Bore *** 1/2” S.A.E. Flat Washer 2 1/2-20 Left Hand Jam Nut * Check part number on motor data label to verify correct motor. ** Specify voltage when ordering. *** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 26 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for Steam Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 27 for Steam Models ONLY Illus. No. Part No. Qty. 1 2 3 100114 100701 101130 101139 120200 181003 150501 153002 153001 100075 1 1 1 1 1 1 4 4 4 1 4 5 6 7 8 9* 10 11 12 13 14 15 16 17 18 120200 150501 153002 153001 154000 152004 153002 153001 800920 803952** 803987** 19 20 21 22 23 24 117604 153051 100702 100603 153050 152006 Description 4L-630 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (60 Hz Only) 5/8” x 2-3/4” Motor Pulley (50 Hz Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 220/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor with 3/4” Shaft (56Z frame) 1 3/8” x 90° Connector 4 5/16-18 x 3/4” Hex Head Machine Bolt 4 5/16” Lock Washer 4 5/16” Flat Washer 8 5/16” Tinnerman Nut 7 5/16” Hex Nut 7 5/16” Lock Washer 7 5/16” Flat Washer 1 Reversing Motor Mount ONLY (56Z frame) 1 60 Hz Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 1 50 Hz Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 4 Neoprene Sponge Tape (sold by the foot) 1 3/4” S.A.E. Flat Washer 1 1/8” x 1/8” x 1-1/2” Key 1 16” Impellor with 3/4” Bore *** 1/2” S.A.E. Flat Washer 2 1/2-20 Left Hand Jam Nut * Check part number on motor data label to verify correct motor. ** Specify voltage when ordering. *** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 Sensor Bracket Assemblies Microprocessor Sensor Bracket Assembly MAN0238 Non-Computer Sensor Bracket Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 29 Sensor Bracket Assemblies Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 130103 153010 152000 121028 122701 112801 122605 154007 150005 801425 1 2 2 2 4 1 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 305007 122604 122700 150301 150005 130111 130100 130103 130101 153010 152000 840065 121028 122701 122605 840062 1 1 4 2 * 1 1 1 1 * * 1 * * 1 1 25 801418 1 305007 122604 122700 122801 150301 1 7 8 9 10 26 27 28 * 1 2 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 4-Pin Socket Connector ONLY 1/4” Tinnerman Push-on Fastener #6-32 x 1/4” Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Large Thermostat ) 150° Large Thermostat 225° Large Automatic Reset Thermostat 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper (4) ONLY Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor (4) Bracket Harness Assembly (includes illus. nos. 22, 23, and 24) Non-computer Sensor (4) Bracket Assembly Complete (includes Thermostats) (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw * As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 American Dryer Corporation Hot Surface Ignition (HSI) Burner Assembly 88 Currant Road / Fall River, MA 02720-4781 31 Hot Surface Ignition (HSI) Burner Assembly Illus. No. Part No. Qty. 1 881781* 1 881784* 1 15 16 17 18 19 20 21 22 802237 881231** 318041 150309 810029 881797 141105 150103 153000 151001 140820 140804 141210 318700 150300 128927 880960 140411 881367 142809 323737 319704 151000 150001 130201 -------- 1 1 1 5 1 1 4 4 4 4 4 4 1 2 2 1 1 1 1 1 1 1 2 2 1 1 23 24 25 26 27 28 29 30 31 143000 150309 150309 151001 150309 128921 150301 881597 150309 1 2 2 2 3 1 1 1 1 2 3 4 5 6 7 8 9 10** 11 12 13 14 Description Natural Gas Burner Assembly Complete Less Orifices (includes illus. nos 1 through 9 and 11 through 29) For models mfd. with Natural Gas ONLY L.P. (liquid propane) Gas Burner Assembly Complete Less Orifices (includes illus. nos 1 through 9 and 11 through 29) For models mfd. with L.P. (liquid propane) Gas ONLY Burner Box ONLY ADG-75THS L.P. Conversion Kit Burner Box Front ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Hot Surface Ignition (HSI) Module Mounting Bracket HSI (Hot Surface Ignition) Module II Large Burner Tube #8-32 x 1/2” Phillips Round Head Machine Screw #8 Steel Burr #8-32 Pal Nut #29 Burner Orifice (natural gas) ONLY #48 Burner Orifice (liquid propane gas) ONLY 4-Port Manifold Pipe Bracket #10 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC L.P. (liquid propane) Gas Valve Assembly 24 VAC Gas Valve L.P. (liquid propane) Conversion Kit 1/2’ Union Shut Off with Tail Piece 1/2” x 29-1/8” Nipple Pipe Bracket Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330º Manual Reset Hi-Limit ONLY Sail Switch (refer to Sail Switch Assembly on page 35) 3/4” to 1/2” Reducing Coupling #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw #8-32 Pal Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw HSI Flame Sensor #8-18 x 7/16” Phillips Pan Head TEK Screw Hot Surface Ignitor (2-1/2” length) - 24 VAC #10-16 x 1/2” Hex Head TEK Crimptite Screw * Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 32 Electric Oven Assembly ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Electric Oven Assembly Illus. No. Part No. Qty. 1 803005 --------* --------* 150300 802800 802801 1 1 2 1 1 154004 150413 802799 122200 150303 105500 319202 154002 150300 803100 320611 150402 130400 150300 154001 121012 152014 --------* --------* 120081 120080 152008 121011* --------** 153009 320607 150402 1 2 1 1 2 1 1 1 2 1 1 2 1 2 1 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 33 Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Phillips Round Head Crimptite Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push-on Fastener #10 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw 290° Hi-Limit #10 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut Terminal Lug for 110-8 Wire 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5/8” Truss Head Machine Screw * Refer to Electric Oven Component Application Chart on page 34. ** Consult factory for Wiring Harness required. Telephone: (508) 678-9000 Fax: (508) 678-9447 34 American Dryer Corporation Kw Volt Phase Wire Elements Oven Wire Terminal Lug Oven Assembly* B u s B ar Part No. P / N 121011 Qty. Size Part No. Qty. Size Part No. Qty. Part No. Oven Relay Cat. No. Part No. 416 3ø 3 or 4 8 2 48 2 2 6 6.6 120027 4 #6 133200 9 121010 1 DFAG 131361 36 208 3ø 3 or 4 824921 6 6 120015 4 #2 133302 4 121012 1 G EA J 131385 36 230 3ø 3 824920 6 6 120014 4 #2 133302 9 121012 1 FE A J 131375 36 416 3ø 3 or 4 8 2 49 2 1 6 6 120015 4 #4 133300 4 121012 1 DFAG 131361 36 460/480 3ø 3 or 4 824920 6 6 120014 4 #2 133302 9 121012 1 DPA43 131357 33 380 3ø 3 or 4 8 2 49 2 1 6 6 120015 4 #2 133302 4 121012 1 DFAJ 131361 30 208 3ø 3 or 4 8 2 49 1 8 6 5 120012 6 #4 133300 3 121012 1 FE A J 131375 30 230 3ø 3 824935 6 5 120013 3 #4 133300 4 121012 1 FE A J 131375 30 416 3ø 3 or 4 824947 6 5 120012 4 #8 133100 6 121010 2 DPA43 131357 30 460/480 3ø 3 or 4 824953 6 5 120013 4 #8 133100 6 121010 2 BFAJ 131351 25 380 3ø 3 or 4 824940 6 5 120012 4 #8 133100 6 121010 2 BFAJ 131351 24 208 3ø 3 or 4 824916 6 4 120010 3 #4 133300 4 121012 1 DPA63 131369 24 230 3ø 3 8 2 49 3 3 6 4 120011 3 #6 133200 3 121010 1 DFAG 131361 24 416 3ø 3 or 4 824946 6 4 120010 4 #8 133100 6 121010 2 BFAJ 131351 24 460/480 3ø 3 or 4 8 2 49 5 2 6 4 120011 4 #10 133000 6 121010 2 BFAJ 131351 20 208 1ø 2 824904 5 4 120010 2 #4 133300 2 121010 2 G EA J 131385 20 230 1ø 2 8 2 49 2 6 5 4 120011 2 #4 133300 3 121010 2 FE A J 131375 20 380 3ø 3 or 4 824939 6 4 120010 4 #10 133000 6 121010 2 BFAJ 131351 * Oven assembly complete does not include oven relay. This item must be ordered separately. When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor (computer) or non-microprocessor controls. Electric Oven Component Application Chart 88 Currant Road / Fall River, MA 02720-4781 40 35 Sail Switch Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 319203 319202 319201 319200 154004 154002 150309 150303 122200 881706 1 1 1 1 1 1 4 2 1 1 10 105500 1 Telephone: (508) 678-9000 Description Sail Switch Mounting Bracket Sail Switch Damper (flat) Sail Switch Box Cover Sail Switch Box Twin Speed Nut 1/8" Push-on Fastener #10-16 x 1/2” Hex Head TEK Crimptite Screw #4 x 3/4" Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 10) Sail Switch Actuator Rod Fax: (508) 678-9447 36 Non-Reversing Electric Relay Panel Assembly Computer and Dual Timer Models Illus. No. Part No. Qty. 1 2 3 322812 132445 137015 1 1 1 4 5 6 7 8 9 10 11 ------- 150103 151001 153002 152004 120701 150008 151000 121300 322809 150301 -------- 2 2 1 1 1 2 2 3 1 4 1 American Dryer Corporation Description Back Electrical Box Component Plate 12-Amp Contactor Single-Phase (1ø) and 3-Phase (3ø) - 24 VAC RC Network (for microprocessor [computer] models ONLY) #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated Transformer ... Not Illustrated (refer to Step Down Transformer Usage Listing on page 45) 88 Currant Road / Fall River, MA 02720-4781 37 Microprocessor Reversing Rear Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 322812 137060 137013 132431 132432 150103 151001 153002 152004 132430 132432 150103 151001 120701 150008 151000 121300 322809 150301 -------- 1 1 4 1 2 2 2 1 1 1 1 2 2 1 2 2 3 1 4 1 5 6 7 8 9 10 11 12 13 14 15 ------- Telephone: (508) 678-9000 Description Back Electrical Box Component Plate Arc Suppressor Board Nylon Standoff Reversing Contactor (208/230/240v, 50/60 Hz) - 24 VAC Reversing Contactor Replacement Coil (208/230/240v, 50/60 Hz) - 24 VAC 8-32 x 3/4” Phillips Round Head Machine Screw 8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60Hz) 24 VAC Impellor Contactor Replacement Coil (208/230/240v, 50/60 Hz) - 24 VAC 8-32 x 3/4” Phillips Round Head Machine Screw 8-32 Pal Nut 4-Position Terminal Block 6-32 x 1-1/4” Slotted Round Head Machine Screw 6-32 Pal Nut Open/Close Bushing Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated Transformer ... Not Illustrated (refer to Step Down Transformer Usage Listing on page 45) Fax: (508) 678-9447 38 American Dryer Corporation Air Operated Steam Damper Assembly 88 Currant Road / Fall River, MA 02720-4781 Air Operated Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165009 153002 152004 152002 153007 820321 803415 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151007 152007 100497 100492 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 39 Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 4 1/4” Lock Washer 4 1/4-20 Hex Nut 108 Steam Damper Gasket (sold by the inch) 1 Steam Damper Foam (68-1/2” length) 1 7/16-20 Stainless Steel Acorn Nut 1 7/16-20 Hex Nut 1 1-1/4” Bore x 3” Stroke Piston 1 Piston Support Bracket 4 1/4-20 Hex Nut 4 1/4” Lock Washer 1 1/4” x 1/8” Connector 1 1/4” Tubing (sold in feet) 1 1/4” x 1/8” Connector 1 1/8” Needle Valve 1 1/8” Close Nipple 1 3-Way Micro Valve - 24 VAC 2 #6-32 x 1” Phillips Round Head Machine Screw 2 #6 Star Washer 2 6-32 Hex Nut 1 Micro Valve Support Bracket 2 1/4-20 Hex Nut 2 1/4” Lock Washer 1 1/8” N.P.T. Silencer (muffler) Telephone: (508) 678-9000 Fax: (508) 678-9447 40 Dual Timer Reversing Rear Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 322812 132198 150301 132431 132432 150103 151001 153002 152004 132430 132432 150103 151001 120701 150008 151000 121300 322809 150301 -------- 1 1 2 1 2 2 2 1 1 1 1 2 2 1 2 2 3 1 4 1 5 6 7 8 9 10 11 12 13 14 15 ------- American Dryer Corporation Description Back Electrical Box Component Plate Reversing Timer (50/60 Hz) - 24 VAC #8-18 x 7/16” Phillips Pan Head TEK Screw Reversing Contactor (208/230/240v, 50/60 Hz) - 24 VAC Reversing Contactor Replacement Coil (208/230/240v, 50/60 Hz) - 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC Impellor Contactor Replacement Coil (208/230/240v, 50/60 Hz) - 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated Transformer (refer to Step Down Transformer Usage Listing on page 45) 88 Currant Road / Fall River, MA 02720-4781 Outer Top/Back Guard Assemblies 41 for Gas and Electric Models ONLY Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 322809 150301 323738 150301 150301 312527 314526 150301 103500 1 5 1 6 8 1 1 10 4 Telephone: (508) 678-9000 Description Rear Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Outer Top Guard Lower Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg Fax: (508) 678-9447 42 Back Guard Assembly for Steam Models ONLY Illus. No. Part No. Qty. 1 2 314511 150300 150301 322809 150301 103500 1 2 8 1 4 4 3 4 5 American Dryer Corporation Description Bottom Back Guard #10 x 1/2” Hex Washer TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Rear Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 88 Currant Road / Fall River, MA 02720-4781 43 Coin Acceptors Listing NOTE: Coin Acceptors listed included Optical Switch (ADC Part No. 137056). Single Coin* ADC Part No. Nation Description 125100 125101 125114 125120 125124 125107 125130 125123 881604 125103 125121 125129 125132 125133 U.S. and Canada United Kingdom United Kingdom France France Australia Australia New Zealand Japan ------Singapore Hong Kong 25¢ Optic Coin Acceptor 10 New Pence Optic Coin Acceptor 20 New Pence Optic Coin Acceptor 2 French Franc Optic Coin Acceptor 5 French Franc Optic Coin Acceptor 20¢ Australian Optic Coin Acceptor $1 Australian Optic Coin Acceptor 50¢ New Zealand Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor .882 Token Optic Coin Acceptor .800 Token Optic Coin Acceptor Muller Token Optic Coin Acceptor 50¢ Singapore Optic Coin Acceptor $1 Hong Kong Optic Coin Acceptor Dual Coin* 881508 881842 881542 881846 125134 125126 U.S. and Canada Canada United Kingdom France Denmark Netherlands 10¢ / 25¢ Hanke Dual Optic Coin Acceptor 25¢ / $1 Hanke Dual Optic Coin Acceptor 1£ / 20 Pence Hanke Dual Optic Coin Acceptor 2 / 5 Franc Hanke Dual Optic Coin Acceptor 1 / 5 Danish Krone Dual Optic Coin Acceptor 25¢ / 1 Guilder Dual Optic Coin Acceptor * Consult factory for coin acceptors not listed. Telephone: (508) 678-9000 Fax: (508) 678-9447 44 Transformer Usage Listing for Electric Models ONLY TRANSFORMER USAGE LISTING (for Electric Models Only) Kw Voltage Phase Wire Transformer Part No. Control Rear 40 416 3ø 3 or 4 132070 132062 36 208 3ø 3 132070 -------- 36 208 3ø 4 132070 -------- 36 230 3ø 3 or 4 132063 -------- 36 416 3ø 3 or 4 132070 132062 36 460/480 3ø 3 or 4 141403 132053 33 380 3ø 3 or 4 132070 132059 30 208 3ø 3 or 4 132063 -------- 30 230 3ø 3 132063 -------- 30 416 3ø 3 141403 132053 30 460/480 3ø 3 or 4 141403 132053 25 380 3ø 3 or 4 141403 132059 24 208 3ø 3 or 4 132070 -------- 24 230 3ø 3 132070 -------- 24 416 3ø 3 or 4 141403 132062 24 460/480 3ø 3 or 4 141403 132053 20 208 1ø 2 132070 -------- 20 230 1ø 2 132063 -------- 20 380 3ø 3 or 4 141403 132059 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 45 Step Down Transformer Usage Listing S TEP DOWN TRANSFORMER USAGE LISTING Voltage Wire Service Transformer Part No. 380 3 132059 380 4 132059 GAS 416 3 132062 E LECTRIC S TEAM 416 4 132062 460/480 3 132053 460/480 4 132053 575 3 132050 Heat Telephone: (508) 678-9000 Fax: (508) 678-9447 46 Part No. 112039 112280 112041 112534 114006 114094 117505 120100 120300 120400 120500 120600 120800 120802 120902 120903 121014 121499 121500 121503 122804 404500 404502 404506 404507 410001 880200 880884 Additional Parts Available Description “Black/White/Green Ground” Label “Clean Lint Screen” Label “CAUTION - Exhaust/Lint Screen” Label “Phase 5 OPL Program Location Summary” Label “WARNING - Fire Hazards” Label “MOP HEAD WARNING” Label Aluminum Duct Tape (sold by the foot) 3/8” Straight (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX Retainer Clip) 3/8” Greenfield (BX) 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-on Wire Nut 1/4” Insulated (female) Terminal 4” Harness Tie 7” Harness Tie Harness Tie Mounting Clip Manometer (Hydro Gauge) for measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Beige Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 1/2” Allen Wrench (for removal of Shut-Off Valve Tail Piece) Electrical Terminal (assortment) Kit Tumbler Bearing Puller American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADC 450416 1 - 08/06/99-50 2 * 04/13/01-25