Download ADC UD-50 User's Manual

UD-50 Parts Manual
1989 thru 1991
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
020191
071797WM/abe
ADC Part No. 450097
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual
included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
UD-50
MODEL NO. __________________________________________
DISTRIBUTOR’S NAME ___________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at
(508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite from
the various dryer models. Be sure to check descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
High Security Control Door Assembly ..................................................................................................... 3
Phase 3 OPL Microprocessor Control Panel Assembly ........................................................................... 4
Phase 3 OPL Microprocessor Control Box Assembly ............................................................................. 5
Phase 4 OPL Non-Reversing Control Panel Assembly............................................................................. 6
Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly ..................................................... 7
Phase 4 OPL Reversing Control Panel Assembly ..................................................................................... 8
Phase 4 OPL Reversing Microprocessor Control Box Assembly.............................................................. 9
Phase 4 OPL UniSport® Microprocessor Control Panel Assembly ......................................................... 10
Phase 4 OPL Microprocessor Control Box Assembly ............................................................................11
Dual Timer Control Panel Assembly ................................................................................................ 12, 13
Dual Timer Control Box Assembly ................................................................................................. 14, 15
Main Door Assembly ........................................................................................................................... 16
Front Panel Assembly ........................................................................................................................... 17
Basket (Tumbler)/Support Assemblies............................................................................................. 18, 19
Drop Lint Door Assembly ..................................................................................................................... 20
Lint Trap Assembly ............................................................................................................................... 21
Basket (Tumbler) Bearing Assembly................................................................................................ 22, 23
Idler Bearing Assembly ................................................................................................................... 24, 25
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ........................... 26, 27
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ................................... 28, 29
Sensor Bracket Assemblies ............................................................................................................. 30, 31
Standard (Non-Hi/Lo) Burner Assembly
for Globar® Ignition Models ONLY ......................................................................................... 32, 33
Hi/Lo Computerized Burner Assembly
for Globar® Ignition Models ONLY ........................................................................................ 34, 35
Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 36, 37
Sail Switch/Hi-Limit Assemblies
for Globar® and Direct Spark Ignition (DSI) Models ONLY ................................................. 38, 39
Replacement Coils for 3/8” Non-Hi/Lo Gas Valve
for Globar® and Direct Spark Ignition (DSI) Models ONLY ....................................................... 40
Replacement Coils for 3/8” Hi/Lo Gas Valve
for Globar® Ignition Models ONLY ............................................................................................... 41
Electric Oven Assembly .................................................................................................................. 42, 43
Electric Oven Component Application Chart ......................................................................................... 44
Steam Coil/Valve Assembly................................................................................................................... 45
Microprocessor Reversing Control Assembly
Telemecanique ................................................................................................................................ 46
Dual Timer Reversing Control Assembly
Telemecanique ................................................................................................................................ 47
Microprocessor Reversing Control Assembly
Struthers-Dunn................................................................................................................................ 48
Dual Timer Reversing Control Assembly
Struthers-Dunn................................................................................................................................ 49
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Telemecanique ................................................................................................................................ 50
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Furnas .............................................................................................................................................. 51
Control/Heat Step Down Transformer
for Globar® and High Pressure Motorized Steam Valve Models ONLY ............................... 52
Outer Top/Back Guard Assembly ......................................................................................................... 53
Heat Reclaimer Assembly ..................................................................................................................... 54
Arc Suppressor (A.S.) Relay Board Listing ........................................................................................... 55
Globar® Burner Assembly Specifications ............................................................................................... 56
Direct Spark Ignition (DSI) Burner Assembly Specifications .................................................................. 57
Additional Parts Available ..................................................................................................................... 58
3
High Security Control Door Assembly
Illus. No.
Part No.
Qty.
1
2
3
160017
160016
112312
112337
870011
800021*
1
1
1
1
1
1
800142
1
180202
102307
150201
150309
102600
102601
102502
1
3
6
4
1
1
1
4
5
6
7
8
9
10
11
Description
Special Dummy Lock ONLY
Lock Cam ONLY
UniDryer® Logo ONLY
UniSport® Logo ONLY
Logo Double Tape Kit
High Security Control Door Assembly Less Lock
(includes illus. nos. 4 through 7)
High Security Stainless Steel Control Door Assembly Less Lock
(includes illus. nos. 4 through 7)
Top Trim Strip with Lock Hole
Trim Bumper Gasket (sold by the foot)
#10-32 x 1/4” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
* Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Phase 3 OPL Microprocessor Control Panel Assembly
Illus. No.
Part No.
1
112535
112276
112275
1
1
1
112277
1
112278
1
800057
800164
800161
1
1
1
800163
1
865088*
865089*
1
1
137092
137093
1
1
137094*
137095*
152001
160005
1
1
4
1
2
3
4
5
Qty.
Description
OPL English Keyboard Label Assembly
OPL Stick-on Labels (English Only) ... Not Illustrated
OPL Stick-on Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
3-Language OPL Stick-on Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5-Language OPL Stick-on Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Microprocessor Control Panel ONLY
Microprocessor Control Panel ONLY with Battery Bracket
Phase 3 OPL Non-Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 5)
Phase 3 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete with Battery Option
(includes illus. nos. 1 through 5)
Phase 3 OPL Reversing Microprocessor Control Panel Assembly Complete
Phase 3 OPL Reversing Microprocessor Control Panel Assembly Complete
with Battery Option
(includes illus. nos. 1 through 5)
Phase 3 OPL Non-Reversing Controller (computer) ONLY
Phase 3 OPL Non-Reversing Controller (computer) ONLY
with Battery Clip
Phase 3 OPL reversing controller (computer) ONLY
Phase 3 OPL Reversing Controller (computer) ONLY with Battery Clip
#8-32 Hex Nut
Spring Turn Latch (2-piece)
* Used on dryer models with reversing option ONLY.
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
NOTE: OPL controllers listed are suitable for ALL voltage applications.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
Phase 3 OPL Microprocessor Control Box Assembly
Illus. No.
Part No.
1
2
137021
137020
122800
150315
137022
137013
--------
13 or 15
1
1
1
1
8
1
137061
131916
131930
140150
136052
150309
131030
1
1 or 2
1 or 2
1
1 or 2
2
1
131031
1
150002
120709
151000
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Qty.
Telephone: (508) 678-9000
Description
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
Microprocessor (female) Pin Extraction Tool
#6 x 3/8” Phillips Pan Head “B” Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Arc Suppressor [A.S.] Relay Board Listing on page 55)
Arc Suppressor (A.S.) Board ONLY (without relay)
P.C.B. (electromechanical) Relay ONLY - 120 Volt
P.C.B. (electromechanical) Relay ONLY - 208/230 Volt
Diode Logic Board ONLY
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay - 120 Volt
(for high pressure steam models Only)
Steam Valve Relay - 208/230 Volt
(for high pressure steam models Only)
#6-32 x 1” Phillips Round Head Machine Screw
8-Position Terminal Strip
#6-32 Pal Nut
Fax: (508) 678-9447
6
Phase 4 OPL Non-Reversing Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535
112276
112275
1
1
1
112277
1
112278
1
800057
800164
800171
1
1
1
865095
1
3
137125
137126
1
1
4*
5
306052
150108*
152001
153000
137011
160005
1
4
4
4
4
1
2
6*
7*
8
Description
OPL English Keyboard Label Assembly
OPL Stick-on Labels (English Only) ... Not Illustrated
OPL Stick-on Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
3-Language OPL Stick-on Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5-Language OPL Stick-on Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Microprocessor Control Panel ONLY
Microprocessor Control Panel ONLY with Battery Bracket
Phase 4 OPL Non-Reversing Microprocessor Control
Panel Assembly Complete
(includes illus. nos. 1 through 8)
Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete with Battery Option
(includes illus. nos. 1 through 8)
Phase 4 OPL Non-Reversing Controller (computer) ONLY
Phase 4 OPL Non-Reversing Controller (computer) ONLY
with Battery Clip
Electrostatic Shield
#8-32 x 1/2” Phillips Pan Head Machine Screw
#8-32 Hex Nut
#8 Steel Burr
1/4” Aluminum Standoff
Spring Turn Latch (2-piece)
* Used on gas dryer models with the Direct Spark Ignition (DSI) system manufactured prior to March 13, 1989.
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly
Illus. No.
Part No.
1
2
137021
137020
122800
150315
137022
137013
---------
3
4
5
6
9
10
137061
136052
131916
131930
150300
141403
11
12
150309
131030
7
8
131031
13
14
15
16
17
18
150002
120715
151000
136008
150301
136057
Qty.
7
Description
12
1
1
1
1
4
1
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
Microprocessor (female) Pin Extraction Tool
#6 x 3/8” Phillips Pan Head “B” Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Arc Suppressor [A.S.] Relay Board Listing on page 55)
1
Arc Suppressor (A.S.) Board ONLY (without relay)
1 or 2 4-Amp Fuse ONLY
1
P.C.B. (electromechanical) Relay ONLY - 120 Volt
1
P.C.B. (electromechanical) Relay ONLY - 208/230 Volt
2
#10-16 x 1/2” Hex Washer TEK Screw
1
Direct Spark Ignition (DSI) 24 VAC Transformer
(for use on gas models with Direct Spark Ignition [DSI] Only)
2
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1
Steam Valve Relay - 120 Volt
(for high pressure steam models Only)
1
Steam Valve Relay - 208/230 Volt
(for high pressure steam models Only)
2
#6-32 x 1” Phillips Round Head Machine Screw
1
30-Position Terminal Block
2
#6-32 Pal Nut
*
Fuse Block/Strip ONLY
*
#8 x 7/16” Self Drilling Screw
*
1/2-Amp (slo blo) Fuse ONLY
* As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Phase 4 OPL Reversing Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535
112276
112275
1
1
1
112277
1
112278
1
800057
800164
865092
1
1
1
865096
1
137127
137128
306052
150108*
152001
153000
137011
160005
1
1
1
4
4
4
4
1
2
3
4*
5
6*
7*
8
Description
OPL English Keyboard Label Assembly
OPL Stick-on Labels (English Only) ... Not Illustrated
OPL Stick-on Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
3-Language OPL Stick-on Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5-Language OPL Stick-on Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Microprocessor Control Panel ONLY
Microprocessor Control Panel ONLY with Battery Bracket
Phase 4 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 8)
Phase 4 OPL Reversing Microprocessor Control Panel Assembly Complete
with Battery Option
(includes illus. nos. 1 through 8)
Phase 4 OPL Reversing Controller (computer) ONLY
Phase 4 OPL Reversing Controller (computer) ONLY with Battery Clip
Electrostatic Shield
#8-32 x 1/2” Phillips Pan Head Machine Screw
#8-32 Hex Nut
#8 Steel Burr
1/4” Aluminum Standoff
Spring Turn Latch (2-piece)
* Used on gas dryer models with the Direct Spark Ignition (DSI) system manufactured prior to March 13, 1989.
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4 OPL Reversing Microprocessor Control Box Assembly
Illus. No.
Part No.
1
2
3
4
5
6
137021
137020
122800
150315
137022
137013
---------
7
8
9
10
137061
136052
131930
150300
141403
11
12
150309
131031
13
14
15
16
17
18
150002
120715
151000
136008
150301
136057
Qty.
9
Description
14
1
1
1
1
4
1
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
Microprocessor (female) Pin Extraction Tool
#6 x 3/8” Phillips Pan Head “B” Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Arc Suppressor [A.S.] Relay Board Listing on page 55)
1
Arc Suppressor (A.S.) Board ONLY (without relay)
1 or 2 4-Amp Fuse ONLY
1
P.C.B. (electromechanical) Relay ONLY - 208/230 Volt
2
#10-16 x 1/2” Hex Washer TEK Screw
1
Direct Spark Ignition (DSI) 24 VAC Transformer
(for use on gas models with Direct Spark Ignition [DSI] Only)
2
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1
Steam Valve Relay - 208/230 Volt
(for high pressure steam models Only)
2
#6-32 x 1” Phillips Round Head Machine Screw
1
30-Position Terminal Block
2
#6-32 Pal Nut
*
Fuse Block/Strip ONLY
*
#8 x 7/16” Self Drilling Screw
*
1/2-Amp (slo blo) Fuse ONLY
* As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Phase 4 OPL UniSport® Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
800057
865106
1
1
865105
1
306052
150108*
152001
153000
137011
160005
137125
137127
112523
1
4
4
4
4
1
1
1
1
2*
3
4*
5*
6
7
8
Description
OPL Microprocessor Control Panel ONLY
Phase 4 OPL UniSport® Direct Spark Ignition (DSI) Non-Reversing Control
Panel Assembly Complete
(includes illus. nos. 1 through 8)
Phase 4 OPL UniSport® Direct Spark Ignition (DSI) Reversing Control
Panel Assembly Complete
(includes illus. nos. 1 through 8)
Electrostatic Shield
8-32 x 1/2” Pan Head Machine Screw
8-32 Hex Nut
#8 Steel Burr
8/32” Aluminum Standoff
Turn Latch (2-piece)
Phase 4 OPL Non-Reversing Controller ONLY
Phase 4 OPL Reversing Controller ONLY
UniSport® OPL Keyboard Label Assembly
* Used on UniSport® dryers manufactured prior to March 13, 1989.
IMPORTANT: When ordering a replacement Phase 4 OPL microprocessor controller (computer) from the
ADC factory for UniSport® option dryers, please advise the customer service representative
that the replacement microprocessor controller (computer) is to be preprogrammed with the
special UniSport® parameters (programs).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
11
Phase 4 OPL Microprocessor Control Box Assembly
Illus. No.
Part No.
1
2
137021
137020
122800
150315
137022
137013
---------
12 or 14
1
1
1
1
4
1
9
10
137061
136052
131916
131930
150300
141403
1
1 or 2
1
1
1
1
11
12
13
14
15
16
150002
120715
151000
136008
150301
136057
2
1
2
*
*
*
3
4
5
6
7
8
Qty.
Description
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
Microprocessor (female) Pin Extraction Tool
#6 x 3/8” Phillips Pan Head “B” Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Arc Suppressor [A.S.] Relay Board Listing on page 55)
Arc Suppressor (A.S.) Board ONLY (without relay)
4-Amp Fuse ONLY
P.C.B. (electromechanical) Relay ONLY - 120 Volt
P.C.B. (electromechanical) Relay ONLY - 208/230 Volt
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for use on gas models with Direct Spark Ignition [DSI] Only)
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Strip
#6-32 Pal Nut
Fuse Block/Strip ONLY
#8 x 7/16” Self Drilling Screw
1/2-Amp (slo blo) Fuse ONLY
* As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
American Dryer Corporation
Dual Timer Control Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
13
Dual Timer Control Panel Assembly
Illus. No.
Part No.
Qty.
1
123000
123001
122400
824015
1
1
1
1
824015
1
800051
131812
131813
150207
154001
152000
153010
120713
1
1
1
2
2
2
2
1
120708
1
150002
150110
150001
131030
131031
151000
112050
160005
124103
124020
124021
124032
124023
122602
122700
122801
2
4
2
1
1
2
1
1
2
1
1
1
1
1
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
---
Telephone: (508) 678-9000
Description
Red Indicator Light - 120 Volt
Red Indicator Light - 230 Volt
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete - 120 Volt
(includes illus. nos. 1 through 21)
Dual Timer Control Panel Assembly Complete - 230 Volt
(includes illus. nos. 1 through 21)
Dual Timer Control Panel ONLY
Push-to-Start Relay - 120 Volt
Push-to-Start Relay - 230 Volt
#10-24 x 1/2” Phillips Round Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
18-Position Terminal Block
(for models mfd. as of May 3, 1989)
3-Position Terminal Block
(for models mfd. prior to May 3, 1989)
#6-32 x 1” Phillips Round Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
Dual Timer Relay - 120 Volt
Dual Timer Relay - 230 Volt
#6-32 Pal Nut
Dual Timer Label ONLY
Spring Turn Latch (2-piece)
Arrow Timer Knob
60-Minute Timer - 120 Volt
60-Minute Timer - 230 Volt
15-Minute Timer - 120 Volt
60-Minute Timer - 230 Volt
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
Fax: (508) 678-9447
14
Dual Timer Control Box Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Dual Timer Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
122603
122701
122801
150300
141403
1
9
1
2
1
3
4
5
6
7
150309
131030
131031
131814
8
9
150309
875250
10*
136052
136054
136056
136002
11
12*
13
14***
15
16
17
136052
136054
136056
137013
140150
152002
120715
120709
151000
Description
9-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for use on gas models with Direct Spark Ignition [DSI] Only)
2
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1
Steam Valve Relay (High Pressure Steam Only) - 120 Volt
1
Steam Valve Relay (High Pressure Steam Only) - 208/230 Volt
1
Motor Control Relay ONLY
(120 Volt controls Only)
2
#10-16 x 1/2” Hex Head TEK Crimptite Screw
2
In-Line Fuse Holder Assembly ONLY
(model application varies)
** 4-Amp Fuse ONLY
** 15-Amp (Slo Blo) Fuse ONLY
** 20-Amp (Slo Blo) Fuse ONLY
1 or 2 Panel Mount Fuse Holder Assembly ONLY
(model application varies)
** 4-Amp Fuse ONLY
** 15-Amp (slo blo) Fuse ONLY
** 20-Amp (slo blo) Fuse ONLY
4
Nylon Standoff
1
Diode Logic Board
2
#6-32 x 1” Phillips Round Head Machine Screw
1
30-Position Terminal Block
1
8-Position Terminal Strip
2
#6-32 Pal Nut
* Check fuse rating for verification.
** As applicable.
*** For use on Globar® dryer models ONLY.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Illus. No.
Main Door Assembly
Part No.
Qty.
800136
1
800133
1
800134
1
2
3
4
5
6
7
8
9
10
11
12
13
103050
150410
152014
102350
102210
150002
102105
152013
306802
102102
150410
800131
1
4
4
1
1
2
2
2
6
4
4
2
---
170730
1
1*
Description
Main Door Assembly Complete
(includes illus. nos. 1 through 12)
Main Door Assembly Less Accessories
(includes illus. nos. 1, 2, and 3)
Main Door with Glass and Gasket ONLY
(includes illus. nos. 1, 2, 3, 5, and 6)
12-1/2” Stainless Steel Main Door Hinge
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
68-1/2” Main Door Gasket
20-7/16” Door Glass
6-32 x 1” Phillips Round Head Machine Screw
Magnet Holder ONLY
#6-32 Hex Nut
Magnet Keeper ONLY
Door Magnet (.215)
#10-24 x 3/8” Phillips Pan Head Taptite Screw
Cast Aluminum Magnet Holder Assembly Complete
(includes illus. nos. 7 through 11)
Main Door Gasket/Glass Adhesive (10.3 oz. cartridge)
* ALL model dryers manufactured as of June 1, 1989 are built with a lightweight main door assembly.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
17
Front Panel Assembly
Illus. No.
Part No.
Qty.
1
800367*
1
800373*
800355
2
3
4
5
6
313903
154200
121405
150309
137003
7
8
9
401551
152003
870010
10
11
313209
150301
150300
Description
Right Hand Front Panel Assembly Complete
(includes illus. nos. 1 through 4)
1
Right Hand Insulated Front Panel Assembly Complete
(includes illus. nos. 1 through 4)
1
Stainless Steel Right Hand Front Panel Assembly Complete
(includes illus. nos. 1 through 4)
2
3-1/2” Stainless Steel Striker Pad
4
5/32” Pop Rivet
1
Rubber Grommet
8
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1
Door Switch ONLY
(includes illus. nos. 6, 7, and 8)
1 or 2 Door Switch Spacer/Washer
1
#3/8-32 x 1/2 x 1/16” Door Switch Nut
1
Door Switch Housing Assembly Complete
(includes illus. nos. 6 through 9)
1
Door Switch Housing ONLY
2
#8-18 x 7/16” Phillips Pan Head TEK Screw
1
#10-16 x 1/2” Hex Washer TEK Screw
* Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
18
American Dryer Corporation
Basket (Tumbler)/Support Assemblies
88 Currant Road / Fall River, MA 02720-4781
19
Basket (Tumbler)/Support Assemblies
Illus. No.
Part No.
Qty.
1
800706
800856
800806*
1
1
1
800866*
1
800818*
1
800875*
1
150309
301301
301401
150500
100902
153001
800606
800615
152004
153002
153001
116002
401010
40
4
4
1
4
4
1
1
4
4
4
1
1
2
3
4
5
6
7
8
9
10
11
---
Description
Basket (tumbler) ONLY without Felt Collar
Stainless Steel Basket (tumbler) ONLY without Felt Collar
1-3/8” Non-Reversing Basket (tumbler)
and Support Assembly Complete
(includes illus. nos. 1 through 10)
1-3/8” Stainless Steel Non-Reversing Basket (tumbler)
and Support Assembly Complete
(includes illus. nos. 1 through 10)
1-3/4” Reversing Basket (tumbler)
and Support Assembly Complete
(includes illus. nos. 1 through 10)
1-3/4” Stainless Steel Reversing Basket (tumbler)
and Support Assembly Complete
(includes illus. nos. 1 through 10)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Basket (tumbler) Rib ONLY
Stainless Steel Basket (tumbler) Rib ONLY
5/16-18 x 3/4” Socket Button Head Screw
5/16-18 x 31” Tie Rod
5/16” Flat Washer
1-3/8” Non-Reversing Basket (tumbler) Support ONLY
1-3/4” Reversing Basket (tumbler) Support ONLY
5/16-18” Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar
* Felt collar is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Drop Lint Door Assembly
Illus. No.
Part No.
Qty.
1
160003
160104
800150
160200
160008
160009
150425
1
1
1
1
1
1
1
157000
800217*
1
1
800235*
1
800241
1
150201
117604
102307
180212
150419
108120
150418
10
7
3
2
2
1
1
2
3
4
5
6
7
8
9
10
---
Description
Dummy Lock ONLY
MK-100 Key ONLY
Knob Latch Kit Assembly ... Not Illustrated
Knob Latch with 2 Screws
Lock Cam ONLY
Knob Latch Adjustable Cam ONLY
#12-24 x 3/8” Phillips Round Head Machine Screw
(screw for knob latch adjustable cam)
Drop Lint Door Spring
Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
Stainless Steel Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
#10-32 x 1/4” Phillips Round Head Machine Screw
Neoprene Sponge Tape (sold by the foot)
Trim Bumper Gasket (sold by the foot)
Trim/Kick Plate (38-1/4” length)
#6 x 1/2” Tamperproof TEK Screw
Chain for Drop Lint Door (10-1/2” length)
Tamperproof Screw Hand Driver
* Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
21
Lint Trap Assembly
Illus. No.
Part No.
Qty.
1
800402
1
800404
800407
1
1
800406
154200
304101
150300
800501
150419
108120
150418
1
7
1
2
1
2
1
1
2
3
4
5
6
7
-
Telephone: (508) 678-9000
Description
Non-Reversing Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
Non-Reversing Lint Trap ONLY
Reversing Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
Reversing Lint Trap ONLY
5/32” Pop Rivet
Lint Screen Holder ONLY
#10-16 x 1/2” Hex Washer TEK Screw
Lint Screen ONLY
#6 x 1/2” Tamperproof TEK Screw
Chain for Drop Lint Door (10-1/2” length)
Tamperproof Screw Hand Driver
Fax: (508) 678-9447
22
American Dryer Corporation
Basket (Tumbler) Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
Illus. No.
Part No.
Qty.
1
100203
1
100220
2
153005
153025
3
152005
152050
4
5
6
7
8
9
10
11
12
13
14
15
16
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
801103
17
18
19
20
21
801105
801104
100202
152005
154303
101100
101118
101119
22
23
24
154301
100713
100106
23
Description
1-3/8” Flange Bearing
(for non-reversing models Only)
1
1-3/4” Flange Bearing
(for reversing models Only)
4
3/8” Lock Washer
(for non-reversing models Only)
4
9/16” Lock Washer
(for reversing models Only)
4
3/8-16 Hex Nut
(for non-reversing models Only)
4
9/16-12 Hex Nut
(for reversing models Only)
2
3/8-16 x 3/4” Hex Head Machine Bolt
2
3/8” Lock Washer
2
3/8-16 Hex Nut
2
3/8-16 x 1/2” Hex Head Machine Bolt
2 or 4 3/8” Flat Washer
2
3/8” Lock Washer
2
3/8-16 Hex Nut
4
5/16-18 x 3/4” Hex Head Machine Bolt
4
5/16” Lock Washer
4
5/16” Flat Washer
2
5/16-18 x 1-1/2” Hex Head Machine Bolt
2
5/16-18 Hex Nut
1
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
1
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
1
1-3/8” Bearing Box ONLY
1
Pillow Block Bearing Support ONLY
1
1-3/8” Pillow Block Bearing ONLY
2
3/8-16 Hex Nut
2
3/8-16 x 1/4” Allen Set Screw
1
18” Pulley
(for non-reversing models Only)
1
18-3/4” Sprocket Pulley
(for reversing models Only)
1
1-3/8” Taper Lock Hub
(for reversing models Only)
2
5/16-18 x 5/16” Allen Set Screw
1
1/4” x 1/4” x 7/8” Key
1
5L-690 V-Belt (basket [tumbler] to idler)
Telephone: (508) 678-9000
Fax: (508) 678-9447
24
American Dryer Corporation
Idler Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
100106
101140
100114
1
1
1
100117
1
4
5
6
7
8
9
10
11
154301
100705
301850
152002
153007
100214
150521
801007
2
1
1
3
3
2
3
1
12
13
14
15
16
17
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
Telephone: (508) 678-9000
25
Description
5L-690 V-Belt (idler to basket [tumbler])
14” x 3” Compound Pulley
4L-630 V-Belt (idler to motor)
(for dryers mfd. as of August 1, 1990)
4L-620 V-Belt (idler to motor)
(for dryers mfd. prior to August 1, 1990)
5/16-18 x 1” Allen Set Screw
3/16” x 3/16” x 1-3/8” Key
5/8” x 3/4” Idler Shaft ONLY
1/4-20 Hex Nut
1/4” Lock Washer
5/8” Flange Bearing
1/4-20 x 2” Carriage Bolt
Idler Bearing Assembly Complete
(includes illus. nos. 6 through 17)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
26
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
100114
1
100117
1
100701
101133
101130
150501
153002
153001
120200
100033*
100034
100007*
152004
153002
153001
117604
154000
800906
803772*
1
1
1
4
4
4
1
1
1
1
4
4
4
4
4
1
1
803778
1
803771*
1
803776*
1
15
16
17
153050
100604
100702
100723
**
1
1
1
18
19
153050
152006
**
2
2
3
4
5
6
7
8
9
10
11
12
13
14
27
Description
4L-630 V-Belt (motor to idler assembly)
(for dryers mfd. as of August 1, 1990)
4L-620 V-Belt (motor to idler assembly)
(for dryers mfd. prior to August 1, 1990)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (50 Hz Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
3/8” x 90º Connector
3/4 HP 120/230v 1ø 60 Hz T.E.F.C. Motor (56Z frame)
3/4 HP 230v 1ø 50 Hz T.E.F.C. Motor (56Z frame)
1/2 HP 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame)
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Neoprene Sponge Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY (56Z frame)
3/4 HP 120/230v 1ø 60 Hz Non-Reversing T.E.F.C. Motor Mount
Assembly Complete
(includes illus. nos. 2 through 8 and 12 through 19)
3/4 HP 230v 1ø 50 Hz Non-Reversing T.E.F.C. Motor Mount Assembly
Complete
(includes illus. nos. 2 through 8 and 12 through 19)
1/2 HP 208/230/380/460v 3ø 60 Hz Non-Reversing T.E.F.C. Motor Mount
Assembly Complete
(includes illus. nos. 2 through 8 and 12 through 19)
1/2 HP 208/230/380/460v 3ø 50 Hz Non-Reversing T.E.F.C. Motor Mount
Assembly Complete
(includes illus. nos. 2 through 8 and 12 through 19)
1/2” S.A.E. Flat Washer
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/8” x 1/8” x 1-3/8” Key
(for models with Part No. 100034 T.E.F.C. motor Only)
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
* Specify voltage when ordering.
** As required.
IMPORTANT: Check part number on motor data label to verify correct motor.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
100114
1
100117
1
100701
101133
101130
120200
100007*
150501
153002
153001
100004*
100035
120200
150501
153002
153001
154000
152004
153002
153001
800912
803870*
1
1
1
1
1
4
4
4
1
1
1
4
4
4
4
4
4
4
1
1
803941
1
117604
153050
100702
100604
153050
152006
4
**
1
1
**
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
29
Description
4L-630 V-Belt (motor to idler assembly)
(for dryers mfd. as of August 1, 1990)
4L-620 V-Belt (motor to idler assembly)
(for dryers mfd. prior to August 1, 1990)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (50 Hz Only)
3/8” x 90º Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 HP 120/230v 1ø 60 Hz T.E.F.C. Motor (56Z frame)
1/2 HP 230v 1ø 50 Hz T.E.F.C. Motor (56Z frame)
3/8” x 90º Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
Reversing T.E.F.C. Motor Mount Assembly Complete - 60 Hz ONLY
(includes illus. nos. 2 through 14 and 18 through 24)
Reversing T.E.F.C. Motor Mount Assembly Complete - 50 Hz ONLY
(includes illus. nos. 2 through 14 and 18 through 24)
Neoprene Sponge Tape (sold by the foot)
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
* Specify voltage when ordering.
** As required.
IMPORTANT: Check part number on motor data label to verify correct motor.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
Sensor Bracket Assemblies
Microprocessor Sensor Bracket Assembly
Noncomputer Sensor Bracket Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
7
8
9
10
130103
153010
152000
121028
122701
122605
154007
150000
801425
1
2
2
2
4
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
305007
122604
122700
150301
150000
130109
130107
130103
130101
153010
152000
840065
121028
122701
122605
840062
1
1
4
2
5
1
1
1
1
5
5
1
8
4
1
1
25
801411
1
305007
122604
122700
122801
150301
1
26
27
28
4
1
2
Telephone: (508) 678-9000
31
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Large Automatic Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push-on Fastener
#6-32 x 1/4” Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Round Head Machine Screw
140° Large Thermostat
160° Large Thermostat
225° Large Automatic Reset Thermostat
180° Large Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper ONLY
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
Sensor (4) Bracket Harness Assembly
(includes illus. nos. 22, 23, and 24)
NonComputer Sensor (4) Bracket Assembly Complete
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
32
American Dryer Corporation
Standard (Non-Hi/Lo) Burner Assembly
for Globar® Ignition Models ONLY
88 Currant Road / Fall River, MA 02720-4781
33
Standard (Non-Hi/Lo) Burner Assembly
for Globar® Ignition Models ONLY
Illus. No.
Part No.
Qty.
1
--------*
1
2
3
4
5
6
7
8
9
10
11
12
804005
804008
150309
150001
130401
319704
151000
152001
153012
130500
150108
150309
802706
1
1
2
2
1
1
2
1
1
1
1
2
1
802705
1
13
14
15
16
17
18
19
20
21**
150108
153000
151001
141105
150002
153017
128910
151000
--------
2 or 3
2 or 3
2 or 3
2 or 3
1
1
1
1
2 or 3
22
141203
1
141205
1
26
27
28
29
---
318700
150309
140005
140411
318700
150309
142809
881367
--------**
1
2
1
1
2
4
1
1
1
---
410001
1
23
24
25
Description
Standard (non-hi/lo) Burner Assembly Complete
(includes illus. nos. 1 through 20 and 22 through 29)
Refer to Globar® Burner Assembly Listing on page 56
Non-Heat Reclaimer Burner Box ONLY
Heat Reclaimer Burner Box ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Hi-Limit ONLY
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#8-32 Hex Nut
#8 Star Washer
IR Sensor ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
IR/Globar® Mounting Bracket
(for non-heat reclaimer models Only)
IR/Globar® Mounting Bracket
(for heat reclaimer models Only)
#8-32 x 1/2” Phillips Pan Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
Large Tube Burner
6-32 x 1” Phillips Round Head Machine Screw
#6 Steel Burr
Globar® ONLY
#6-32 Pal Nut
Burner Orifice
(refer to Globar® Burner Orifice Listing on page 56)
1/2” (3-port) Manifold
(for non-heat reclaimer models Only)
1/2” (2-port) Manifold
(for heat reclaimer models Only)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” Globar® (natural gas) Gas Valve
1/2” Valve Liquid Propane (L.P.) Conversion Kit
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” x 29-1/8” Pipe
1/2” Union Shut Off with Tail Piece
Liquid Propane L.P.) Conversion Kit
(refer to Globar® L.P. Conversion Kit Listing on page 56)
1/2” Allen Wrench
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
American Dryer Corporation
Hi/Lo Computerized Burner Assembly
for Globar® Ignition Models ONLY
88 Currant Road / Fall River, MA 02720-4781
35
Hi/Lo Computerized Burner Assembly
for Globar® Ignition Models ONLY
Illus. No.
Part No.
Qty.
1
--------*
1
2
3
4
5
6
7
8
9
10
11
12
804005
804008
150309
150001
130401
319704
151000
152001
153012
130500
150108
150309
802706
1
1
2
2
1
1
2
1
1
1
1
2
1
802705
1
13
14
15
16
17
18
19
20
21**
150108
153000
151001
141105
150002
153017
128910
151000
--------
2 or 3
2 or 3
2 or 3
2 or 3
1
1
1
1
2 or 3
22
141203
1
141205
1
26
27
28
29
---
318700
150309
140010
140411
318700
150309
142809
881367
--------**
1
2
1
1
2
4
1
1
1
---
410001
1
23
24
25
Description
Standard (hi/lo) Burner Assembly Complete
(includes illus. nos. 1 through 20 and 22 through 29)
Refer to Globar® Burner Assembly Listing on page 56
Non-Heat Reclaimer Burner Box ONLY
Heat Reclaimer Burner Box ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Hi-Limit ONLY
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#8-32 Hex Nut
#8 Star Washer
IR Sensor ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
IR/Globar® Mounting Bracket
(for non-heat reclaimer models Only)
IR/Globar® Mounting Bracket
(for heat reclaimer models Only)
#8-32 x 1/2” Phillips Pan Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
Large Tube Burner
6-32 x 1” Phillips Round Head Machine Screw
#6 Steel Burr
Globar® ONLY
#6-32 Pal Nut
Burner Orifice
(refer to Globar® Burner Orifice Listing on page 56)
1/2” (3-port) Manifold
(for non-heat reclaimer models Only)
1/2” (2-port) Manifold
(for heat reclaimer models Only)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” Hi/Lo (natural gas) Gas Valve
1/2” Valve Liquid Propane (L.P.) Conversion Kit
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” x 29-1/8” Pipe
1/2” Union Shut Off with Tail Piece
Liquid Propane (L.P.) Conversion Kit
(refer to Globar® Liquid Propane (L.P.) Conversion Kit Listing
on page 56)
1/2” Allen Wrench
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
American Dryer Corporation
Direct Spark Ignition (DSI) Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly
Illus. No.
Part No.
Qty.
1
318104
1
318030
1
2
3
4
150300
150309
128915
880134
2
2
1
1
5
6
7
8
9
10
880330
1
150103
2 or 3
153000
2 or 3
151001
2 or 3
141105
2 or 3
---------* 2 or 3
11
141232
1
141230
1
318700
150300
128927
140411
881367
142809
150309
318700
850852
850863
--------*
1
2
1
1
1
1
4
2
1
1
1
20
21
---
880815
150300
--------**
1
4
1
---
410001
1
12
13
14
15
16
17
18
19
37
Description
Direct Spark Ignition (DSI) Burner Shield (3-Tube)
For Heat Reclaimer Models ONLY
Direct Spark Ignition (DSI) Burner Shield (2-Tube)
For Non-Heat Reclaimer Models ONLY
#10 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Direct Spark Ignition (DSI) Ignitor/Flame-Probe Assembly
Ignitor/Flame-Probe Kit Assembly
(includes illus. nos. 4 and 6)
High Voltage (HV) Wire and Connector Assembly
#8-32 x 1/2” Phillips Pan Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
Large Tube Burner ONLY
Burner Orifice
(refer to Direct Spark Ignition (DSI) Burner Orifice Listing on page 57)
1/2” Direct Spark Ignition (DSI) Manifold (3-Port)
For Non-Heat Reclaimer Models ONLY
1/2” Direct Spark Ignition (DSI) Manifold (2-Port)
For Heat Reclaimer Models ONLY
Pipe Bracket (bent)
#10 x 1/2” Hex Washer TEK Screw
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” Valve Liquid Propane (L.P.) Conversion Kit
1/2” Union Shut Off with Tail Piece
1/2” x 29-1/8” Pipe
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Pipe Bracket (bent)
Non-Heat Reclaimer Burner Box ONLY
Heat Reclaimer Burner Box ONLY
Direct Spark Ignition (DSI) Burner Assembly
(refer to Direct Spark Ignition (DSI) Burner Assembly Specifications
on page 57)
ADC Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz
#10-16 x 1/2” Hex Washer TEK Screw
Liquid Propane (L.P.) Conversion Kit
(refer to Direct Spark Ignition (DSI) Liquid Propane (L.P.)
Conversion Kit Listing on page 57)
1/2” Allen Wrench
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
Sail Switch/Hi-Limit Assemblies
for Globar® and Direct Spark Ignition (DSI) Models ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sail Switch/Hi-Limit Assemblies
39
for Globar® and Direct Spark Ignition (DSI) Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
154004
150309
802799
150303
122200
105500
319202
154002
802800
802801
1
2
1
2
1
1
1
1
1
1
10
11
12
13
14
15
16
17
18*
19*
20*
21*
142809
840055
830000
150309
319704
151000
151001
130401
150108
153012
152001
130500
1
1
1
2
1
2
2
1
1
1
1
1
Description
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 9)
1/2” x 29-1/8” Pipe
Sail Switch Harness
Hi-Limit Harness
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330º Hi-Limit ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
#8 Star Washer
#8-32 Hex Nut
IR Sensor ONLY
* For Globar® ignition models ONLY. Items 18 through 21 are not illustrated.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Replacement Coils for 3/8” Non-Hi/Lo Gas Valve
for Globar® Ignition Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
140111
140112
140110
1
1
1
American Dryer Corporation
Description
Holding Coil
Booster Coil
Secondary Coil
88 Currant Road / Fall River, MA 02720-4781
Replacement Coils for 3/8” Hi/Lo Gas Valve
41
for Globar® Ignition Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
140116
140115
140117
140118
1
1
1
1
Telephone: (508) 678-9000
Description
Holding Coil
Booster Coil
Secondary Coil
Hi/Lo Coil
Fax: (508) 678-9447
42
American Dryer Corporation
Electric Oven Assembly
88 Currant Road / Fall River, MA 02720-4781
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803001
--------*
--------*
150300
802800
802801
1
1
2
1
1
154004
150309
802799
122200
150303
105500
319202
154002
150300
803100
321000
150402
130400
150300
154001
150103
120704*
154001
152001
121010
152014
--------*
--------*
120081
120080
152008
121011*
--------*
153009
321301
150402
1
2
1
1
2
1
1
1
2
1
1
2
1
2
2
2
2
2
1
3
1
1
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
43
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-on Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#10-24 x 5/8” Slotted Truss Head Machine Screw
290° Hi-Limit ONLY
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
#8-32 x 3/4” Phillips Round Head Machine Screw
Terminal Block
#10-24 Speed Nut
#8-32 Hex Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 5/8” Slotted Truss Head Machine Screw
* Refer to Electric Oven Component Application Chart on page 44.
Telephone: (508) 678-9000
Fax: (508) 678-9447
44
American Dryer Corporation
OVEN WIRE
TERMINAL LUG
ELEMENTS
OVEN ASSY*
PART NO. Qty. Size Part No. Qty. Size Part No. Qty. Part No.
OVEN RELAY
T. BLOCK
P/N 120704
121010
1
1
DEAG
131305
131809
7
121010
1
1
DEAF
131304
131808
133100
7
121010
1
1
CEAG
131303
131809
#8
133100
4
121010
2
-
CEAG
131303
131809
3
#8
133100
4
121010
2
-
BEAG
131311
131809
120012
3
#8
133100
4
121010
2
-
BEAG
131311
131809
4
120010
5
#8
133100
7
121010
1
1
CEAG
131303
131809
6
4
120010
5
#8
133100
7
121010
1
1
CEAF
131302
131808
815307
6
4
120011
5
#10
133000
7
121010
1
1
BEAG
131311
131809
3 or 4
815604
6
4
120010
3
#8
133100
4
121010
2
-
BEAG
131311
131809
3ø
3 or 4
815704
6
4
120011
3
#10
133000
4
121010
2
-
BEAG
131311
131809
208
1ø
2
815005
5
4
120010
2
#4
133300
2
121012
2
-
GEAG
131312
131811
20
230
1ø
2
815205
5
4
120011
2
#4
133300
2
121012
2
-
FEAG
131309
131811
20
380
3ø
3 or 4
815404
6
4
120010
3
#10
133300
4
121010
2
-
BEAG
131311
131809
VOLT
PHASE WIRE
30
208
3ø
3
815105
6
5
120012
6
#6
133200
7
30
208
3ø
4
815105
6
5
120012
6
#6
133200
30
230
3ø
3
815305
6
5
120013
5
#8
30
416
3ø
3 or 4
815605
6
5
120012
3
30
460/480
3ø
3 or 4
815705
6
5
120013
25
380
3ø
3 or 4
815405
6
5
24
208
3ø
3
815107
6
24
208
3ø
4
815107
24
230
3ø
3
24
416
3ø
24
460/480
20
RELAY COIL
Cat. No. Part No. PART NO.
* Oven assembly complete does not include oven relay or terminal block. These items must be ordered separately. When ordering oven assembly
complete, specify 3-wire or 4-wire when applicable, as well as if dryer has computer or noncomputer controls.
Electric Oven Component Application Chart
88 Currant Road / Fall River, MA 02720-4781
BUS BAR
P/N 121011
KW
Steam Coil/Valve Assembly
Illus. No.
Part No.
Qty.
1
803500
1
803501
1
150300
165002
6
1
165003
1
142711
1
142713
1
165107
1
165102
1
165103
1
2
3
4
5
Telephone: (508) 678-9000
45
Description
Large Steam Rack
(for models mfd. with high pressure Only)
Large Steam Rack
(for models mfd. with low pressure Only)
#10-16 x 1/2” Hex Washer TEK Screw
Large Steam Coil
(for models mfd. with high pressure Only)
Large Steam Coil
(for models mfd. with low pressure Only)
1” Closed Nipple
(for models mfd. with high pressure Only)
1-1/4” Closed Nipple
(for models mfd. with low pressure Only)
1” Motorized Steam Valve
(for models mfd. with high pressure Only)
1-1/4” Steam Valve - 120 Volt
(for models mfd. with low pressure Only)
1-1/4” Steam Valve - 230 Volt
(for models mfd. with low pressure Only)
Fax: (508) 678-9447
46
Microprocessor Reversing Control Assembly
Telemecanique
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
150301
322808
137060
137013
153002
152004
150108
132426
6
1
1
4
2
2
4
1
132427
2
322807
151001
1
4
9
10
American Dryer Corporation
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Relay Box Cover Plate ONLY
Arc Suppressor (A.S.) Board (3)
Nylon Standoff
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Contactor
(208/230/240 Volt - 50/60 Hz)
Reversing Contactor Replacement Coil
(208/230/240 Volt - 50/60 Hz)
Contactor Mounting Panel ONLY
#8-32 Pal Nut
88 Currant Road / Fall River, MA 02720-4781
Dual Timer Reversing Control Assembly
47
Telemecanique
Illus. No.
Part No.
Qty.
1
2
3
4
150301
322808
150108
132200
132202
151001
153002
152004
150108
132426
6
1
4
1
1
2
2
2
4
1
132427
2
322807
151001
1
4
5
6
7
8
9
10
11
Telephone: (508) 678-9000
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Relay Box Cover Plate ONLY
#8-32 x 1/2” Pan Head Machine Screw
Reversing Timer - 60 Hz ONLY
Reversing Timer - 50 Hz ONLY
#8-32 Pal Nut
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Contactor
(208/230/240 Volt - 50/60 Hz)
Reversing Contactor Replacement Coil
(208/230/240 Volt - 50/60 Hz)
Contactor Mounting Panel ONLY
#8-32 Pal Nut
Fax: (508) 678-9447
48
Microprocessor Reversing Control Assembly
Struthers-Dunn
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
150301
322808
137060
137013
153002
152004
150108
132404
132401
132416
6
1
1
4
2
2
4
1
1
2
132415
2
132407
2
322807
151001
1
2
9
10
11
American Dryer Corporation
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Relay Box Cover Plate ONLY
Arc Suppressor (A.S.) Board (3)
Nylon Standoff
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Pan Head Machine Screw
Reversing Contactor - 208 Volt
Reversing Contactor - 220/230 Volt
Reversing Contactor Replacement Coil
(208 Volt - 60 Hz)
Reversing Contactor Replacement Coil
(220/230 Volt - 60 Hz)
Reversing Contactor Replacement Coil
(240 Volt - 50 Hz)
Contactor Mounting Panel ONLY
#8-32 Pal Nut
88 Currant Road / Fall River, MA 02720-4781
Dual Timer Reversing Control Assembly
49
Struthers-Dunn
Illus. No.
Part No.
Qty.
1
2
3
4
150301
322808
150108
132200
132202
151001
153002
152004
150108
132404
132401
132416
6
1
2
1
1
2
2
2
2
1
1
2
132415
2
132407
2
322807
151001
1
2
5
6
7
8
9
10
11
12
Telephone: (508) 678-9000
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Relay Box Cover Plate ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Timer - 60 Hz ONLY
Reversing Timer - 50 Hz ONLY
#8-32 Pal Nut
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Pan Head Machine Screw
Reversing Contactor - 208 Volt
Reversing Contactor - 220/230 Volt
Reversing Contactor Replacement Coil
(208 Volt - 60 Hz)
Reversing Contactor Replacement Coil
(220/230 Volt - 60 Hz)
Reversing Contactor Replacement Coil
(240 Volt - 50 Hz)
Contactor Mounting Panel ONLY
#8-32 Pal Nut
Fax: (508) 678-9447
50
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Telemecanique
Illus. No.
Part No.
Qty.
1
2
150309
311913
311921
137015
132425
6
1
1
1
1
132427
1
151000
150300
151001
311920
4
2
4
1
3*
4
5
6
7
8
Description
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Service Box Cover Plate (9-7/8” x 4-3/8”)
Service Box Cover Plate (9-7/8” x 5-3/4”)
Arc Suppressor (A.S.) - capacitor - ONLY
Impellor Contactor
(208/230/240 Volt - 50/60 Hz)
Impellor Contactor Replacement Coil
(208/230/240 Volt - 50/60 Hz)
#8-32 x 1/2” Phillips Round Head Machine Screw
#10 x 1/2” Hex Washer TEK Screw
#8-32 Pal Nut
3-Phase (3ø) Non-Reversing Contactor Mounting Bracket
* For use on 3-phase (3ø) non-reversing microprocessor controlled dryer models ONLY.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
3-Phase (3ø) Motor, Electric Relay Panel Assembly
51
Furnas
Illus. No.
Part No.
Qty.
1
2
150309
311913
311921
880662
132400
151001
6
1
1
1
1
2
3*
4
5
Description
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Service Box Cover Plate (9-7/8” x 4-3/8”)
Service Box Cover Plate (9-7/8” x 5-3/4”)
Dual RC Suppressors ONLY
Impellor Contactor ONLY
8-32 Pal Nut
* Used on computer models ONLY.
Telephone: (508) 678-9000
Fax: (508) 678-9447
52
Control/Heat Step Down Transformer
for Globar® and High Pressure Motorized Steam Valve Models ONLY
Illus. No.
Part No.
Qty.
1*
132002
1
2
3
-
150309
121400
880210
2
2
1
Description
200-Watt Transformer - 120 Volt
(terminals are not included)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Universal Bushing
Terminal Package for Globar® Transformer
* Used on 208/230 Volt models ONLY.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Outer Top/Back Guard Assemblies
Illus. No.
Part No.
Qty.
1
312513
1
2
3
150300
121101
7
1
4
121100
1
5
6
7
801521
152014
880501
1
3
1
8
103500
4
Telephone: (508) 678-9000
53
Description
Outer Top Assembly
(for gas and electric models Only)
#10-16 x 1/2” Hex Washer TEK Screw
Junction Box Cover ONLY
(for gas and steam models Only)
Junction Box ONLY
(for gas and steam models Only)
Back Guard Assembly
1/4-20 Free Spin Wash Nut
8” Damper Replacement
(for non-heat reclaimer Models Only)
Leveling Leg
Fax: (508) 678-9447
54
Illus. No.
1
2
3
4
5
6*
7
8
-
Heat Reclaimer Assembly
Part No.
Qty.
121101
121100
801521
152014
103500
143501
880502
143509
117505
1
1
1
3
4
1
1
1
2
Description
Junction Box Cover ONLY
Junction Box ONLY
Back Guard Assembly
1/4-20 Free Spin Wash Nut
Leveling Leg
8” x 6” x 6” Tee
6” Replacement Damper Assembly
6” Flexible Duct
Aluminum Duct Tape (sold by the foot)
* Damper assembly must be purchased separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
55
Arc Suppressor (A.S.) Relay Board Listing
TYPE
ELECTRIC VOLTAGE
OF
HEAT
WIRE
S ERVICE
ARC SUPPRESSOR (A.S.)
R ELAY B OARD
PART N UMBERS
(C ONTROL VOLTAGE )
S ERVICE
VOLTAGE
PHASE
Glo Bar Non-Hi/Lo
120
1ø
2
137077 or 137150
---
Glo Bar Non-Hi/Lo
208/230
1ø
2
---
137079
Glo Bar Non-Hi/Lo
208-480
3ø
3
---
137079
Glo Bar Hi/Lo
120
1ø
2
137077 or 137150
---
Glo Bar Hi/Lo
208/230
1ø
2
137077
---
Glo Bar Hi/Lo
208-480
3ø
3
---
137079 or 137150
Direct Spark Ignition (DSI)
120
1ø
2
137076 or 137151
---
Direct Spark Ignition (DSI)
208/230
1ø
2
---
137078 or 137151
Direct Spark Ignition (DSI)
208-480
3ø
3
---
137078
208/230
1ø
2
---
137078 or 137151
208-480
3ø
3
---
137078 or 137151*
208
3ø
4
137076 or 137151*
---
380-480
3ø
4
---
137078 or 137151*
Low Pressure
120
1ø
2
137076 or 137151
---
Low Pressure
208/230
1ø
2
---
137078 or 137151
Low Pressure
208-480
3ø
3
---
137078
High Pressure
120
1ø
2
137076 or 137151
---
High Pressure
208/230
1ø
2
---
137078 or 137151
High Pressure
208-480
3ø
3
---
137078
120 VOLT
208/230
VOLT
GAS
ELECTRIC
20 Kw through 30 Kw
STEAM
* ADC Part No. 137151 Solid State Relay (SSR) Board cannot be used with 3-phase (3ø) motors.
IMPORTANT: Check label on Arc Suppressor (A.S.) Board to verify correct part number.
NOTE: Solid State Relay (SSR) Boards (ADC Part No. 137150 and ADC Part No. 137151) can be used
in place of electromechanical relay boards as noted.
Telephone: (508) 678-9000
Fax: (508) 678-9447
56
Globar® Burner Assembly Specifications
G LOBAR® BURNER ORIFICE L ISTING*
ADC
HEAT
QTY.
MODEL NUMBER R ECLAIMER
NATURAL GAS
LIQUID PROPA NE
(L.P.) GAS
D.M.S. PART NO . D.M.S. P ART N O.
UDG-50B
UDG-50BH
No
Yes
3
2
#31
#30
140818
140819
#49
#47
140803
140805
* Consult factory for elevations over 2,000 feet.
G LOBAR ® B URNER A SSEMBLY L ISTING
ADC
MOD EL N UMBER
UDG-50B
UDG-50B
UDG-50BH
UDG-50BH
D RYER
C ONTROLS
HEAT
N ATURA L GAS
LIQUID PROPANE
(L.P.) GAS
PART NO .
P AR T N O.
809607
808704
809594
809543
809608
808804
809604
809548
R ECLAIMER
Computer
Noncomputer
Computer
Noncomputer
No
No
Yes
Yes
NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately
2. Models with computer controls and optional heat reclaimer systems have hi/lo
computerized
gas valve system.
3. When ordering burner assemblies, specify model number and if computer or noncomputer
controls.
G LOBAR® L IQUID P ROP ANE (L.P.)
CONVERSION KIT L ISTING*
ADC
MODEL NUMBER
HEAT
RECLAIMER
LIQUID PROPANE (L.P.)
KIT PART NUMBER
UDG-50B
UDG-50B
UDG-50BH
UDG-50BH
No
No
Yes
Yes
874035
874017
874019
874018
* Consult factory for elevations over 2,000 feet.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
57
Direct Spark Ignition (DSI) Burner Assembly Specifications
DIRECT SPARK IGNITION (DSI) BURNER ORIFICE L ISTING *
ADC
MODEL NU MBER
HEAT
RECLAIMER
N ATURA L GAS
QTY.
LIQUID PROPAN E
(L.P.) GAS
D.M.S. P ART NO . D.M.S.
UDG-50D
UDG-50DH
No
Yes
3
2
#29
#23
140820
140856
#48
#42
PART NO .
140804
140810
* Consult factory for elevations over 2,000 feet.
DIRECT SP ARK IGNITION (DSI) B URNER A SSEMBLY LISTING
ADC
MODEL NUMBER
BTU/H
RATING
UDG-50D
UDG-50DH
160,000
140,000
HEAT
NATURAL GAS
LIQUID PROPANE
(L.P.) GAS
P ART NO.
PART N O.
809627
809629
809628
809630
RECLAIMER
NO
YES
NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately
2. When ordering burner assemblies, specify model number and if computer or noncomputer
controls
DIRECT S PARK IGNITION (DSI) LIQUID
P ROPANE (L.P.) CONVERSION KIT L ISTING*
ADC
MODEL NUMBER
LIQUID PROPANE (L.P.)
KIT PART NUMBER
UDG-50D
UDG-50DH
874046
874047
* Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
58
Part No.
112039
112090
112280
114001
114006
120100
120300
120400
120500
120600
120707
120708
120800
120802
120902
120903
121014
121026
121499
121500
121503
122804
404500
404502
404506
404507
880200
Additional Parts Available
Description
“Black/White/Green Ground” Label
“Phase 4 OPL Program Location Summary” Label
“Clean Lint Screen” Label
“CAUTION - Exhausted/Lint Screen” Label
“WARNING - Fire Hazards” Label
3/8” Straight (BX) Connector
3/8” x 45° (BX) Connector
3/8” Red Jacket (BX) Insulator
3/8” Jiffy Clip (BX Retainer Clip)
3/8” Greenfield (BX)
Terminal Strip (2-position)
Terminal Strip (3-position)
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-on Wire Nut
1/4” Insulated (female) Terminal
Tab Receptacle Combination
4” Harness Tie
7” Harness Tie
Harness Tie Mounting Clip
Manometer (Hydro Gauge) for Measuring Gas Pressure
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Almond “B” Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
Electrical Terminal (assortment) Kit
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450097
1- 02/01/91-250
4- 10/20/94-100
7* 06/30/00-25
2- 03/25/92-100
5- 07/29/97-50
3* 11/19/93-100
6- 01/29/98-50