Download ADC UD-50 User's Manual
Transcript
UD-50 Parts Manual 1989 thru 1991 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] 020191 071797WM/abe ADC Part No. 450097 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ UD-50 MODEL NO. __________________________________________ DISTRIBUTOR’S NAME ___________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite from the various dryer models. Be sure to check descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents High Security Control Door Assembly ..................................................................................................... 3 Phase 3 OPL Microprocessor Control Panel Assembly ........................................................................... 4 Phase 3 OPL Microprocessor Control Box Assembly ............................................................................. 5 Phase 4 OPL Non-Reversing Control Panel Assembly............................................................................. 6 Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly ..................................................... 7 Phase 4 OPL Reversing Control Panel Assembly ..................................................................................... 8 Phase 4 OPL Reversing Microprocessor Control Box Assembly.............................................................. 9 Phase 4 OPL UniSport® Microprocessor Control Panel Assembly ......................................................... 10 Phase 4 OPL Microprocessor Control Box Assembly ............................................................................11 Dual Timer Control Panel Assembly ................................................................................................ 12, 13 Dual Timer Control Box Assembly ................................................................................................. 14, 15 Main Door Assembly ........................................................................................................................... 16 Front Panel Assembly ........................................................................................................................... 17 Basket (Tumbler)/Support Assemblies............................................................................................. 18, 19 Drop Lint Door Assembly ..................................................................................................................... 20 Lint Trap Assembly ............................................................................................................................... 21 Basket (Tumbler) Bearing Assembly................................................................................................ 22, 23 Idler Bearing Assembly ................................................................................................................... 24, 25 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ........................... 26, 27 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ................................... 28, 29 Sensor Bracket Assemblies ............................................................................................................. 30, 31 Standard (Non-Hi/Lo) Burner Assembly for Globar® Ignition Models ONLY ......................................................................................... 32, 33 Hi/Lo Computerized Burner Assembly for Globar® Ignition Models ONLY ........................................................................................ 34, 35 Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 36, 37 Sail Switch/Hi-Limit Assemblies for Globar® and Direct Spark Ignition (DSI) Models ONLY ................................................. 38, 39 Replacement Coils for 3/8” Non-Hi/Lo Gas Valve for Globar® and Direct Spark Ignition (DSI) Models ONLY ....................................................... 40 Replacement Coils for 3/8” Hi/Lo Gas Valve for Globar® Ignition Models ONLY ............................................................................................... 41 Electric Oven Assembly .................................................................................................................. 42, 43 Electric Oven Component Application Chart ......................................................................................... 44 Steam Coil/Valve Assembly................................................................................................................... 45 Microprocessor Reversing Control Assembly Telemecanique ................................................................................................................................ 46 Dual Timer Reversing Control Assembly Telemecanique ................................................................................................................................ 47 Microprocessor Reversing Control Assembly Struthers-Dunn................................................................................................................................ 48 Dual Timer Reversing Control Assembly Struthers-Dunn................................................................................................................................ 49 3-Phase (3ø) Motor, Electric Relay Panel Assembly Telemecanique ................................................................................................................................ 50 3-Phase (3ø) Motor, Electric Relay Panel Assembly Furnas .............................................................................................................................................. 51 Control/Heat Step Down Transformer for Globar® and High Pressure Motorized Steam Valve Models ONLY ............................... 52 Outer Top/Back Guard Assembly ......................................................................................................... 53 Heat Reclaimer Assembly ..................................................................................................................... 54 Arc Suppressor (A.S.) Relay Board Listing ........................................................................................... 55 Globar® Burner Assembly Specifications ............................................................................................... 56 Direct Spark Ignition (DSI) Burner Assembly Specifications .................................................................. 57 Additional Parts Available ..................................................................................................................... 58 3 High Security Control Door Assembly Illus. No. Part No. Qty. 1 2 3 160017 160016 112312 112337 870011 800021* 1 1 1 1 1 1 800142 1 180202 102307 150201 150309 102600 102601 102502 1 3 6 4 1 1 1 4 5 6 7 8 9 10 11 Description Special Dummy Lock ONLY Lock Cam ONLY UniDryer® Logo ONLY UniSport® Logo ONLY Logo Double Tape Kit High Security Control Door Assembly Less Lock (includes illus. nos. 4 through 7) High Security Stainless Steel Control Door Assembly Less Lock (includes illus. nos. 4 through 7) Top Trim Strip with Lock Hole Trim Bumper Gasket (sold by the foot) #10-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod * Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 4 Phase 3 OPL Microprocessor Control Panel Assembly Illus. No. Part No. 1 112535 112276 112275 1 1 1 112277 1 112278 1 800057 800164 800161 1 1 1 800163 1 865088* 865089* 1 1 137092 137093 1 1 137094* 137095* 152001 160005 1 1 4 1 2 3 4 5 Qty. Description OPL English Keyboard Label Assembly OPL Stick-on Labels (English Only) ... Not Illustrated OPL Stick-on Labels (Spanish, Italian, and Hebrew) ... Not Illustrated 3-Language OPL Stick-on Labels (English, Spanish, and Hebrew) ... Not Illustrated 5-Language OPL Stick-on Labels (Italian, Dutch, French, German, and Chinese) ... Not Illustrated Microprocessor Control Panel ONLY Microprocessor Control Panel ONLY with Battery Bracket Phase 3 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 5) Phase 3 OPL Non-Reversing Microprocessor Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 5) Phase 3 OPL Reversing Microprocessor Control Panel Assembly Complete Phase 3 OPL Reversing Microprocessor Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 5) Phase 3 OPL Non-Reversing Controller (computer) ONLY Phase 3 OPL Non-Reversing Controller (computer) ONLY with Battery Clip Phase 3 OPL reversing controller (computer) ONLY Phase 3 OPL Reversing Controller (computer) ONLY with Battery Clip #8-32 Hex Nut Spring Turn Latch (2-piece) * Used on dryer models with reversing option ONLY. IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). NOTE: OPL controllers listed are suitable for ALL voltage applications. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 Phase 3 OPL Microprocessor Control Box Assembly Illus. No. Part No. 1 2 137021 137020 122800 150315 137022 137013 -------- 13 or 15 1 1 1 1 8 1 137061 131916 131930 140150 136052 150309 131030 1 1 or 2 1 or 2 1 1 or 2 2 1 131031 1 150002 120709 151000 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Qty. Telephone: (508) 678-9000 Description Microprocessor Socket ONLY 15-Pin Microprocessor Connector ONLY Microprocessor (female) Pin Extraction Tool #6 x 3/8” Phillips Pan Head “B” Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Arc Suppressor [A.S.] Relay Board Listing on page 55) Arc Suppressor (A.S.) Board ONLY (without relay) P.C.B. (electromechanical) Relay ONLY - 120 Volt P.C.B. (electromechanical) Relay ONLY - 208/230 Volt Diode Logic Board ONLY 4-Amp Fuse ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay - 120 Volt (for high pressure steam models Only) Steam Valve Relay - 208/230 Volt (for high pressure steam models Only) #6-32 x 1” Phillips Round Head Machine Screw 8-Position Terminal Strip #6-32 Pal Nut Fax: (508) 678-9447 6 Phase 4 OPL Non-Reversing Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 112275 1 1 1 112277 1 112278 1 800057 800164 800171 1 1 1 865095 1 3 137125 137126 1 1 4* 5 306052 150108* 152001 153000 137011 160005 1 4 4 4 4 1 2 6* 7* 8 Description OPL English Keyboard Label Assembly OPL Stick-on Labels (English Only) ... Not Illustrated OPL Stick-on Labels (Spanish, Italian, and Hebrew) ... Not Illustrated 3-Language OPL Stick-on Labels (English, Spanish, and Hebrew) ... Not Illustrated 5-Language OPL Stick-on Labels (Italian, Dutch, French, German, and Chinese) ... Not Illustrated Microprocessor Control Panel ONLY Microprocessor Control Panel ONLY with Battery Bracket Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 8) Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 8) Phase 4 OPL Non-Reversing Controller (computer) ONLY Phase 4 OPL Non-Reversing Controller (computer) ONLY with Battery Clip Electrostatic Shield #8-32 x 1/2” Phillips Pan Head Machine Screw #8-32 Hex Nut #8 Steel Burr 1/4” Aluminum Standoff Spring Turn Latch (2-piece) * Used on gas dryer models with the Direct Spark Ignition (DSI) system manufactured prior to March 13, 1989. IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly Illus. No. Part No. 1 2 137021 137020 122800 150315 137022 137013 --------- 3 4 5 6 9 10 137061 136052 131916 131930 150300 141403 11 12 150309 131030 7 8 131031 13 14 15 16 17 18 150002 120715 151000 136008 150301 136057 Qty. 7 Description 12 1 1 1 1 4 1 Microprocessor Socket ONLY 15-Pin Microprocessor Connector ONLY Microprocessor (female) Pin Extraction Tool #6 x 3/8” Phillips Pan Head “B” Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Arc Suppressor [A.S.] Relay Board Listing on page 55) 1 Arc Suppressor (A.S.) Board ONLY (without relay) 1 or 2 4-Amp Fuse ONLY 1 P.C.B. (electromechanical) Relay ONLY - 120 Volt 1 P.C.B. (electromechanical) Relay ONLY - 208/230 Volt 2 #10-16 x 1/2” Hex Washer TEK Screw 1 Direct Spark Ignition (DSI) 24 VAC Transformer (for use on gas models with Direct Spark Ignition [DSI] Only) 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 1 Steam Valve Relay - 120 Volt (for high pressure steam models Only) 1 Steam Valve Relay - 208/230 Volt (for high pressure steam models Only) 2 #6-32 x 1” Phillips Round Head Machine Screw 1 30-Position Terminal Block 2 #6-32 Pal Nut * Fuse Block/Strip ONLY * #8 x 7/16” Self Drilling Screw * 1/2-Amp (slo blo) Fuse ONLY * As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 8 Phase 4 OPL Reversing Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 112275 1 1 1 112277 1 112278 1 800057 800164 865092 1 1 1 865096 1 137127 137128 306052 150108* 152001 153000 137011 160005 1 1 1 4 4 4 4 1 2 3 4* 5 6* 7* 8 Description OPL English Keyboard Label Assembly OPL Stick-on Labels (English Only) ... Not Illustrated OPL Stick-on Labels (Spanish, Italian, and Hebrew) ... Not Illustrated 3-Language OPL Stick-on Labels (English, Spanish, and Hebrew) ... Not Illustrated 5-Language OPL Stick-on Labels (Italian, Dutch, French, German, and Chinese) ... Not Illustrated Microprocessor Control Panel ONLY Microprocessor Control Panel ONLY with Battery Bracket Phase 4 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 8) Phase 4 OPL Reversing Microprocessor Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 8) Phase 4 OPL Reversing Controller (computer) ONLY Phase 4 OPL Reversing Controller (computer) ONLY with Battery Clip Electrostatic Shield #8-32 x 1/2” Phillips Pan Head Machine Screw #8-32 Hex Nut #8 Steel Burr 1/4” Aluminum Standoff Spring Turn Latch (2-piece) * Used on gas dryer models with the Direct Spark Ignition (DSI) system manufactured prior to March 13, 1989. IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4 OPL Reversing Microprocessor Control Box Assembly Illus. No. Part No. 1 2 3 4 5 6 137021 137020 122800 150315 137022 137013 --------- 7 8 9 10 137061 136052 131930 150300 141403 11 12 150309 131031 13 14 15 16 17 18 150002 120715 151000 136008 150301 136057 Qty. 9 Description 14 1 1 1 1 4 1 Microprocessor Socket ONLY 15-Pin Microprocessor Connector ONLY Microprocessor (female) Pin Extraction Tool #6 x 3/8” Phillips Pan Head “B” Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Arc Suppressor [A.S.] Relay Board Listing on page 55) 1 Arc Suppressor (A.S.) Board ONLY (without relay) 1 or 2 4-Amp Fuse ONLY 1 P.C.B. (electromechanical) Relay ONLY - 208/230 Volt 2 #10-16 x 1/2” Hex Washer TEK Screw 1 Direct Spark Ignition (DSI) 24 VAC Transformer (for use on gas models with Direct Spark Ignition [DSI] Only) 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 1 Steam Valve Relay - 208/230 Volt (for high pressure steam models Only) 2 #6-32 x 1” Phillips Round Head Machine Screw 1 30-Position Terminal Block 2 #6-32 Pal Nut * Fuse Block/Strip ONLY * #8 x 7/16” Self Drilling Screw * 1/2-Amp (slo blo) Fuse ONLY * As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 10 Phase 4 OPL UniSport® Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 800057 865106 1 1 865105 1 306052 150108* 152001 153000 137011 160005 137125 137127 112523 1 4 4 4 4 1 1 1 1 2* 3 4* 5* 6 7 8 Description OPL Microprocessor Control Panel ONLY Phase 4 OPL UniSport® Direct Spark Ignition (DSI) Non-Reversing Control Panel Assembly Complete (includes illus. nos. 1 through 8) Phase 4 OPL UniSport® Direct Spark Ignition (DSI) Reversing Control Panel Assembly Complete (includes illus. nos. 1 through 8) Electrostatic Shield 8-32 x 1/2” Pan Head Machine Screw 8-32 Hex Nut #8 Steel Burr 8/32” Aluminum Standoff Turn Latch (2-piece) Phase 4 OPL Non-Reversing Controller ONLY Phase 4 OPL Reversing Controller ONLY UniSport® OPL Keyboard Label Assembly * Used on UniSport® dryers manufactured prior to March 13, 1989. IMPORTANT: When ordering a replacement Phase 4 OPL microprocessor controller (computer) from the ADC factory for UniSport® option dryers, please advise the customer service representative that the replacement microprocessor controller (computer) is to be preprogrammed with the special UniSport® parameters (programs). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 11 Phase 4 OPL Microprocessor Control Box Assembly Illus. No. Part No. 1 2 137021 137020 122800 150315 137022 137013 --------- 12 or 14 1 1 1 1 4 1 9 10 137061 136052 131916 131930 150300 141403 1 1 or 2 1 1 1 1 11 12 13 14 15 16 150002 120715 151000 136008 150301 136057 2 1 2 * * * 3 4 5 6 7 8 Qty. Description Microprocessor Socket ONLY 15-Pin Microprocessor Connector ONLY Microprocessor (female) Pin Extraction Tool #6 x 3/8” Phillips Pan Head “B” Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Arc Suppressor [A.S.] Relay Board Listing on page 55) Arc Suppressor (A.S.) Board ONLY (without relay) 4-Amp Fuse ONLY P.C.B. (electromechanical) Relay ONLY - 120 Volt P.C.B. (electromechanical) Relay ONLY - 208/230 Volt #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for use on gas models with Direct Spark Ignition [DSI] Only) #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Strip #6-32 Pal Nut Fuse Block/Strip ONLY #8 x 7/16” Self Drilling Screw 1/2-Amp (slo blo) Fuse ONLY * As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 12 American Dryer Corporation Dual Timer Control Panel Assembly 88 Currant Road / Fall River, MA 02720-4781 13 Dual Timer Control Panel Assembly Illus. No. Part No. Qty. 1 123000 123001 122400 824015 1 1 1 1 824015 1 800051 131812 131813 150207 154001 152000 153010 120713 1 1 1 2 2 2 2 1 120708 1 150002 150110 150001 131030 131031 151000 112050 160005 124103 124020 124021 124032 124023 122602 122700 122801 2 4 2 1 1 2 1 1 2 1 1 1 1 1 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 --- Telephone: (508) 678-9000 Description Red Indicator Light - 120 Volt Red Indicator Light - 230 Volt Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 120 Volt (includes illus. nos. 1 through 21) Dual Timer Control Panel Assembly Complete - 230 Volt (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push-to-Start Relay - 120 Volt Push-to-Start Relay - 230 Volt #10-24 x 1/2” Phillips Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 18-Position Terminal Block (for models mfd. as of May 3, 1989) 3-Position Terminal Block (for models mfd. prior to May 3, 1989) #6-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw #6-32 x 1/2” Phillips Round Head Machine Screw Dual Timer Relay - 120 Volt Dual Timer Relay - 230 Volt #6-32 Pal Nut Dual Timer Label ONLY Spring Turn Latch (2-piece) Arrow Timer Knob 60-Minute Timer - 120 Volt 60-Minute Timer - 230 Volt 15-Minute Timer - 120 Volt 60-Minute Timer - 230 Volt 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool Fax: (508) 678-9447 14 Dual Timer Control Box Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 15 Dual Timer Control Box Assembly Illus. No. Part No. Qty. 1 2 122603 122701 122801 150300 141403 1 9 1 2 1 3 4 5 6 7 150309 131030 131031 131814 8 9 150309 875250 10* 136052 136054 136056 136002 11 12* 13 14*** 15 16 17 136052 136054 136056 137013 140150 152002 120715 120709 151000 Description 9-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for use on gas models with Direct Spark Ignition [DSI] Only) 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 1 Steam Valve Relay (High Pressure Steam Only) - 120 Volt 1 Steam Valve Relay (High Pressure Steam Only) - 208/230 Volt 1 Motor Control Relay ONLY (120 Volt controls Only) 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 2 In-Line Fuse Holder Assembly ONLY (model application varies) ** 4-Amp Fuse ONLY ** 15-Amp (Slo Blo) Fuse ONLY ** 20-Amp (Slo Blo) Fuse ONLY 1 or 2 Panel Mount Fuse Holder Assembly ONLY (model application varies) ** 4-Amp Fuse ONLY ** 15-Amp (slo blo) Fuse ONLY ** 20-Amp (slo blo) Fuse ONLY 4 Nylon Standoff 1 Diode Logic Board 2 #6-32 x 1” Phillips Round Head Machine Screw 1 30-Position Terminal Block 1 8-Position Terminal Strip 2 #6-32 Pal Nut * Check fuse rating for verification. ** As applicable. *** For use on Globar® dryer models ONLY. Telephone: (508) 678-9000 Fax: (508) 678-9447 16 Illus. No. Main Door Assembly Part No. Qty. 800136 1 800133 1 800134 1 2 3 4 5 6 7 8 9 10 11 12 13 103050 150410 152014 102350 102210 150002 102105 152013 306802 102102 150410 800131 1 4 4 1 1 2 2 2 6 4 4 2 --- 170730 1 1* Description Main Door Assembly Complete (includes illus. nos. 1 through 12) Main Door Assembly Less Accessories (includes illus. nos. 1, 2, and 3) Main Door with Glass and Gasket ONLY (includes illus. nos. 1, 2, 3, 5, and 6) 12-1/2” Stainless Steel Main Door Hinge #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut 68-1/2” Main Door Gasket 20-7/16” Door Glass 6-32 x 1” Phillips Round Head Machine Screw Magnet Holder ONLY #6-32 Hex Nut Magnet Keeper ONLY Door Magnet (.215) #10-24 x 3/8” Phillips Pan Head Taptite Screw Cast Aluminum Magnet Holder Assembly Complete (includes illus. nos. 7 through 11) Main Door Gasket/Glass Adhesive (10.3 oz. cartridge) * ALL model dryers manufactured as of June 1, 1989 are built with a lightweight main door assembly. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 17 Front Panel Assembly Illus. No. Part No. Qty. 1 800367* 1 800373* 800355 2 3 4 5 6 313903 154200 121405 150309 137003 7 8 9 401551 152003 870010 10 11 313209 150301 150300 Description Right Hand Front Panel Assembly Complete (includes illus. nos. 1 through 4) 1 Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1 through 4) 1 Stainless Steel Right Hand Front Panel Assembly Complete (includes illus. nos. 1 through 4) 2 3-1/2” Stainless Steel Striker Pad 4 5/32” Pop Rivet 1 Rubber Grommet 8 #10-16 x 1/2” Hex Head TEK Crimptite Screw 1 Door Switch ONLY (includes illus. nos. 6, 7, and 8) 1 or 2 Door Switch Spacer/Washer 1 #3/8-32 x 1/2 x 1/16” Door Switch Nut 1 Door Switch Housing Assembly Complete (includes illus. nos. 6 through 9) 1 Door Switch Housing ONLY 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 1 #10-16 x 1/2” Hex Washer TEK Screw * Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 18 American Dryer Corporation Basket (Tumbler)/Support Assemblies 88 Currant Road / Fall River, MA 02720-4781 19 Basket (Tumbler)/Support Assemblies Illus. No. Part No. Qty. 1 800706 800856 800806* 1 1 1 800866* 1 800818* 1 800875* 1 150309 301301 301401 150500 100902 153001 800606 800615 152004 153002 153001 116002 401010 40 4 4 1 4 4 1 1 4 4 4 1 1 2 3 4 5 6 7 8 9 10 11 --- Description Basket (tumbler) ONLY without Felt Collar Stainless Steel Basket (tumbler) ONLY without Felt Collar 1-3/8” Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) 1-3/8” Stainless Steel Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) 1-3/4” Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) 1-3/4” Stainless Steel Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” Hex Head TEK Crimptite Screw Basket (tumbler) Rib ONLY Stainless Steel Basket (tumbler) Rib ONLY 5/16-18 x 3/4” Socket Button Head Screw 5/16-18 x 31” Tie Rod 5/16” Flat Washer 1-3/8” Non-Reversing Basket (tumbler) Support ONLY 1-3/4” Reversing Basket (tumbler) Support ONLY 5/16-18” Hex Nut 5/16” Lock Washer 5/16” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar * Felt collar is not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 20 Drop Lint Door Assembly Illus. No. Part No. Qty. 1 160003 160104 800150 160200 160008 160009 150425 1 1 1 1 1 1 1 157000 800217* 1 1 800235* 1 800241 1 150201 117604 102307 180212 150419 108120 150418 10 7 3 2 2 1 1 2 3 4 5 6 7 8 9 10 --- Description Dummy Lock ONLY MK-100 Key ONLY Knob Latch Kit Assembly ... Not Illustrated Knob Latch with 2 Screws Lock Cam ONLY Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Phillips Round Head Machine Screw (screw for knob latch adjustable cam) Drop Lint Door Spring Drop Lint Door Assembly (includes illus. nos. 4 through 8) Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Drop Lint Door Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Round Head Machine Screw Neoprene Sponge Tape (sold by the foot) Trim Bumper Gasket (sold by the foot) Trim/Kick Plate (38-1/4” length) #6 x 1/2” Tamperproof TEK Screw Chain for Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 21 Lint Trap Assembly Illus. No. Part No. Qty. 1 800402 1 800404 800407 1 1 800406 154200 304101 150300 800501 150419 108120 150418 1 7 1 2 1 2 1 1 2 3 4 5 6 7 - Telephone: (508) 678-9000 Description Non-Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Non-Reversing Lint Trap ONLY Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Reversing Lint Trap ONLY 5/32” Pop Rivet Lint Screen Holder ONLY #10-16 x 1/2” Hex Washer TEK Screw Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain for Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver Fax: (508) 678-9447 22 American Dryer Corporation Basket (Tumbler) Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 Basket (Tumbler) Bearing Assembly Illus. No. Part No. Qty. 1 100203 1 100220 2 153005 153025 3 152005 152050 4 5 6 7 8 9 10 11 12 13 14 15 16 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101 801103 17 18 19 20 21 801105 801104 100202 152005 154303 101100 101118 101119 22 23 24 154301 100713 100106 23 Description 1-3/8” Flange Bearing (for non-reversing models Only) 1 1-3/4” Flange Bearing (for reversing models Only) 4 3/8” Lock Washer (for non-reversing models Only) 4 9/16” Lock Washer (for reversing models Only) 4 3/8-16 Hex Nut (for non-reversing models Only) 4 9/16-12 Hex Nut (for reversing models Only) 2 3/8-16 x 3/4” Hex Head Machine Bolt 2 3/8” Lock Washer 2 3/8-16 Hex Nut 2 3/8-16 x 1/2” Hex Head Machine Bolt 2 or 4 3/8” Flat Washer 2 3/8” Lock Washer 2 3/8-16 Hex Nut 4 5/16-18 x 3/4” Hex Head Machine Bolt 4 5/16” Lock Washer 4 5/16” Flat Washer 2 5/16-18 x 1-1/2” Hex Head Machine Bolt 2 5/16-18 Hex Nut 1 1-3/8” Bearing Box Assembly Complete (includes illus. nos. 4 through 20) 1 1-3/8” Bearing Box and Support ONLY (includes illus. nos. 4, 5, 6, 16, and 17) 1 1-3/8” Bearing Box ONLY 1 Pillow Block Bearing Support ONLY 1 1-3/8” Pillow Block Bearing ONLY 2 3/8-16 Hex Nut 2 3/8-16 x 1/4” Allen Set Screw 1 18” Pulley (for non-reversing models Only) 1 18-3/4” Sprocket Pulley (for reversing models Only) 1 1-3/8” Taper Lock Hub (for reversing models Only) 2 5/16-18 x 5/16” Allen Set Screw 1 1/4” x 1/4” x 7/8” Key 1 5L-690 V-Belt (basket [tumbler] to idler) Telephone: (508) 678-9000 Fax: (508) 678-9447 24 American Dryer Corporation Idler Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 Idler Bearing Assembly Illus. No. Part No. Qty. 1 2 3 100106 101140 100114 1 1 1 100117 1 4 5 6 7 8 9 10 11 154301 100705 301850 152002 153007 100214 150521 801007 2 1 1 3 3 2 3 1 12 13 14 15 16 17 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 Telephone: (508) 678-9000 25 Description 5L-690 V-Belt (idler to basket [tumbler]) 14” x 3” Compound Pulley 4L-630 V-Belt (idler to motor) (for dryers mfd. as of August 1, 1990) 4L-620 V-Belt (idler to motor) (for dryers mfd. prior to August 1, 1990) 5/16-18 x 1” Allen Set Screw 3/16” x 3/16” x 1-3/8” Key 5/8” x 3/4” Idler Shaft ONLY 1/4-20 Hex Nut 1/4” Lock Washer 5/8” Flange Bearing 1/4-20 x 2” Carriage Bolt Idler Bearing Assembly Complete (includes illus. nos. 6 through 17) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Fax: (508) 678-9447 26 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. Part No. Qty. 1 100114 1 100117 1 100701 101133 101130 150501 153002 153001 120200 100033* 100034 100007* 152004 153002 153001 117604 154000 800906 803772* 1 1 1 4 4 4 1 1 1 1 4 4 4 4 4 1 1 803778 1 803771* 1 803776* 1 15 16 17 153050 100604 100702 100723 ** 1 1 1 18 19 153050 152006 ** 2 2 3 4 5 6 7 8 9 10 11 12 13 14 27 Description 4L-630 V-Belt (motor to idler assembly) (for dryers mfd. as of August 1, 1990) 4L-620 V-Belt (motor to idler assembly) (for dryers mfd. prior to August 1, 1990) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (60 Hz Only) 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 3/8” x 90º Connector 3/4 HP 120/230v 1ø 60 Hz T.E.F.C. Motor (56Z frame) 3/4 HP 230v 1ø 50 Hz T.E.F.C. Motor (56Z frame) 1/2 HP 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame) 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Neoprene Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 3/4 HP 120/230v 1ø 60 Hz Non-Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 8 and 12 through 19) 3/4 HP 230v 1ø 50 Hz Non-Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 8 and 12 through 19) 1/2 HP 208/230/380/460v 3ø 60 Hz Non-Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 8 and 12 through 19) 1/2 HP 208/230/380/460v 3ø 50 Hz Non-Reversing T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 2 through 8 and 12 through 19) 1/2” S.A.E. Flat Washer 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/8” x 1/8” x 1-3/8” Key (for models with Part No. 100034 T.E.F.C. motor Only) 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut * Specify voltage when ordering. ** As required. IMPORTANT: Check part number on motor data label to verify correct motor. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. Part No. Qty. 1 100114 1 100117 1 100701 101133 101130 120200 100007* 150501 153002 153001 100004* 100035 120200 150501 153002 153001 154000 152004 153002 153001 800912 803870* 1 1 1 1 1 4 4 4 1 1 1 4 4 4 4 4 4 4 1 1 803941 1 117604 153050 100702 100604 153050 152006 4 ** 1 1 ** 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 29 Description 4L-630 V-Belt (motor to idler assembly) (for dryers mfd. as of August 1, 1990) 4L-620 V-Belt (motor to idler assembly) (for dryers mfd. prior to August 1, 1990) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (60 Hz Only) 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 3/8” x 90º Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 120/230v 1ø 60 Hz T.E.F.C. Motor (56Z frame) 1/2 HP 230v 1ø 50 Hz T.E.F.C. Motor (56Z frame) 3/8” x 90º Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 Tinnerman Nut 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY (56Z frame) Reversing T.E.F.C. Motor Mount Assembly Complete - 60 Hz ONLY (includes illus. nos. 2 through 14 and 18 through 24) Reversing T.E.F.C. Motor Mount Assembly Complete - 50 Hz ONLY (includes illus. nos. 2 through 14 and 18 through 24) Neoprene Sponge Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut * Specify voltage when ordering. ** As required. IMPORTANT: Check part number on motor data label to verify correct motor. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 Sensor Bracket Assemblies Microprocessor Sensor Bracket Assembly Noncomputer Sensor Bracket Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Sensor Bracket Assemblies Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 7 8 9 10 130103 153010 152000 121028 122701 122605 154007 150000 801425 1 2 2 2 4 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 305007 122604 122700 150301 150000 130109 130107 130103 130101 153010 152000 840065 121028 122701 122605 840062 1 1 4 2 5 1 1 1 1 5 5 1 8 4 1 1 25 801411 1 305007 122604 122700 122801 150301 1 26 27 28 4 1 2 Telephone: (508) 678-9000 31 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push-on Fastener #6-32 x 1/4” Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Round Head Machine Screw 140° Large Thermostat 160° Large Thermostat 225° Large Automatic Reset Thermostat 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper ONLY Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor (4) Bracket Harness Assembly (includes illus. nos. 22, 23, and 24) NonComputer Sensor (4) Bracket Assembly Complete (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw Fax: (508) 678-9447 32 American Dryer Corporation Standard (Non-Hi/Lo) Burner Assembly for Globar® Ignition Models ONLY 88 Currant Road / Fall River, MA 02720-4781 33 Standard (Non-Hi/Lo) Burner Assembly for Globar® Ignition Models ONLY Illus. No. Part No. Qty. 1 --------* 1 2 3 4 5 6 7 8 9 10 11 12 804005 804008 150309 150001 130401 319704 151000 152001 153012 130500 150108 150309 802706 1 1 2 2 1 1 2 1 1 1 1 2 1 802705 1 13 14 15 16 17 18 19 20 21** 150108 153000 151001 141105 150002 153017 128910 151000 -------- 2 or 3 2 or 3 2 or 3 2 or 3 1 1 1 1 2 or 3 22 141203 1 141205 1 26 27 28 29 --- 318700 150309 140005 140411 318700 150309 142809 881367 --------** 1 2 1 1 2 4 1 1 1 --- 410001 1 23 24 25 Description Standard (non-hi/lo) Burner Assembly Complete (includes illus. nos. 1 through 20 and 22 through 29) Refer to Globar® Burner Assembly Listing on page 56 Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit ONLY Hi-Limit Mounting Bracket #6-32 Pal Nut #8-32 Hex Nut #8 Star Washer IR Sensor ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw IR/Globar® Mounting Bracket (for non-heat reclaimer models Only) IR/Globar® Mounting Bracket (for heat reclaimer models Only) #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Large Tube Burner 6-32 x 1” Phillips Round Head Machine Screw #6 Steel Burr Globar® ONLY #6-32 Pal Nut Burner Orifice (refer to Globar® Burner Orifice Listing on page 56) 1/2” (3-port) Manifold (for non-heat reclaimer models Only) 1/2” (2-port) Manifold (for heat reclaimer models Only) Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” Globar® (natural gas) Gas Valve 1/2” Valve Liquid Propane (L.P.) Conversion Kit Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” x 29-1/8” Pipe 1/2” Union Shut Off with Tail Piece Liquid Propane L.P.) Conversion Kit (refer to Globar® L.P. Conversion Kit Listing on page 56) 1/2” Allen Wrench * Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 34 American Dryer Corporation Hi/Lo Computerized Burner Assembly for Globar® Ignition Models ONLY 88 Currant Road / Fall River, MA 02720-4781 35 Hi/Lo Computerized Burner Assembly for Globar® Ignition Models ONLY Illus. No. Part No. Qty. 1 --------* 1 2 3 4 5 6 7 8 9 10 11 12 804005 804008 150309 150001 130401 319704 151000 152001 153012 130500 150108 150309 802706 1 1 2 2 1 1 2 1 1 1 1 2 1 802705 1 13 14 15 16 17 18 19 20 21** 150108 153000 151001 141105 150002 153017 128910 151000 -------- 2 or 3 2 or 3 2 or 3 2 or 3 1 1 1 1 2 or 3 22 141203 1 141205 1 26 27 28 29 --- 318700 150309 140010 140411 318700 150309 142809 881367 --------** 1 2 1 1 2 4 1 1 1 --- 410001 1 23 24 25 Description Standard (hi/lo) Burner Assembly Complete (includes illus. nos. 1 through 20 and 22 through 29) Refer to Globar® Burner Assembly Listing on page 56 Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit ONLY Hi-Limit Mounting Bracket #6-32 Pal Nut #8-32 Hex Nut #8 Star Washer IR Sensor ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw IR/Globar® Mounting Bracket (for non-heat reclaimer models Only) IR/Globar® Mounting Bracket (for heat reclaimer models Only) #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Large Tube Burner 6-32 x 1” Phillips Round Head Machine Screw #6 Steel Burr Globar® ONLY #6-32 Pal Nut Burner Orifice (refer to Globar® Burner Orifice Listing on page 56) 1/2” (3-port) Manifold (for non-heat reclaimer models Only) 1/2” (2-port) Manifold (for heat reclaimer models Only) Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” Hi/Lo (natural gas) Gas Valve 1/2” Valve Liquid Propane (L.P.) Conversion Kit Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” x 29-1/8” Pipe 1/2” Union Shut Off with Tail Piece Liquid Propane (L.P.) Conversion Kit (refer to Globar® Liquid Propane (L.P.) Conversion Kit Listing on page 56) 1/2” Allen Wrench * Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 36 American Dryer Corporation Direct Spark Ignition (DSI) Burner Assembly 88 Currant Road / Fall River, MA 02720-4781 Direct Spark Ignition (DSI) Burner Assembly Illus. No. Part No. Qty. 1 318104 1 318030 1 2 3 4 150300 150309 128915 880134 2 2 1 1 5 6 7 8 9 10 880330 1 150103 2 or 3 153000 2 or 3 151001 2 or 3 141105 2 or 3 ---------* 2 or 3 11 141232 1 141230 1 318700 150300 128927 140411 881367 142809 150309 318700 850852 850863 --------* 1 2 1 1 1 1 4 2 1 1 1 20 21 --- 880815 150300 --------** 1 4 1 --- 410001 1 12 13 14 15 16 17 18 19 37 Description Direct Spark Ignition (DSI) Burner Shield (3-Tube) For Heat Reclaimer Models ONLY Direct Spark Ignition (DSI) Burner Shield (2-Tube) For Non-Heat Reclaimer Models ONLY #10 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition (DSI) Ignitor/Flame-Probe Assembly Ignitor/Flame-Probe Kit Assembly (includes illus. nos. 4 and 6) High Voltage (HV) Wire and Connector Assembly #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Large Tube Burner ONLY Burner Orifice (refer to Direct Spark Ignition (DSI) Burner Orifice Listing on page 57) 1/2” Direct Spark Ignition (DSI) Manifold (3-Port) For Non-Heat Reclaimer Models ONLY 1/2” Direct Spark Ignition (DSI) Manifold (2-Port) For Heat Reclaimer Models ONLY Pipe Bracket (bent) #10 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” Valve Liquid Propane (L.P.) Conversion Kit 1/2” Union Shut Off with Tail Piece 1/2” x 29-1/8” Pipe #10-16 x 1/2” Hex Head TEK Crimptite Screw Pipe Bracket (bent) Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY Direct Spark Ignition (DSI) Burner Assembly (refer to Direct Spark Ignition (DSI) Burner Assembly Specifications on page 57) ADC Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz #10-16 x 1/2” Hex Washer TEK Screw Liquid Propane (L.P.) Conversion Kit (refer to Direct Spark Ignition (DSI) Liquid Propane (L.P.) Conversion Kit Listing on page 57) 1/2” Allen Wrench * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 38 Sail Switch/Hi-Limit Assemblies for Globar® and Direct Spark Ignition (DSI) Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Sail Switch/Hi-Limit Assemblies 39 for Globar® and Direct Spark Ignition (DSI) Models ONLY Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 154004 150309 802799 150303 122200 105500 319202 154002 802800 802801 1 2 1 2 1 1 1 1 1 1 10 11 12 13 14 15 16 17 18* 19* 20* 21* 142809 840055 830000 150309 319704 151000 151001 130401 150108 153012 152001 130500 1 1 1 2 1 2 2 1 1 1 1 1 Description Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push-On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 9) 1/2” x 29-1/8” Pipe Sail Switch Harness Hi-Limit Harness #10-16 x 1/2” Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330º Hi-Limit ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Star Washer #8-32 Hex Nut IR Sensor ONLY * For Globar® ignition models ONLY. Items 18 through 21 are not illustrated. Telephone: (508) 678-9000 Fax: (508) 678-9447 40 Replacement Coils for 3/8” Non-Hi/Lo Gas Valve for Globar® Ignition Models ONLY Illus. No. Part No. Qty. 1 2 3 140111 140112 140110 1 1 1 American Dryer Corporation Description Holding Coil Booster Coil Secondary Coil 88 Currant Road / Fall River, MA 02720-4781 Replacement Coils for 3/8” Hi/Lo Gas Valve 41 for Globar® Ignition Models ONLY Illus. No. Part No. Qty. 1 2 3 4 140116 140115 140117 140118 1 1 1 1 Telephone: (508) 678-9000 Description Holding Coil Booster Coil Secondary Coil Hi/Lo Coil Fax: (508) 678-9447 42 American Dryer Corporation Electric Oven Assembly 88 Currant Road / Fall River, MA 02720-4781 Electric Oven Assembly Illus. No. Part No. Qty. 1 803001 --------* --------* 150300 802800 802801 1 1 2 1 1 154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 321000 150402 130400 150300 154001 150103 120704* 154001 152001 121010 152014 --------* --------* 120081 120080 152008 121011* --------* 153009 321301 150402 1 2 1 1 2 1 1 1 2 1 1 2 1 2 2 2 2 2 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 43 Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push-on Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw 290° Hi-Limit ONLY #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut #8-32 x 3/4” Phillips Round Head Machine Screw Terminal Block #10-24 Speed Nut #8-32 Hex Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw * Refer to Electric Oven Component Application Chart on page 44. Telephone: (508) 678-9000 Fax: (508) 678-9447 44 American Dryer Corporation OVEN WIRE TERMINAL LUG ELEMENTS OVEN ASSY* PART NO. Qty. Size Part No. Qty. Size Part No. Qty. Part No. OVEN RELAY T. BLOCK P/N 120704 121010 1 1 DEAG 131305 131809 7 121010 1 1 DEAF 131304 131808 133100 7 121010 1 1 CEAG 131303 131809 #8 133100 4 121010 2 - CEAG 131303 131809 3 #8 133100 4 121010 2 - BEAG 131311 131809 120012 3 #8 133100 4 121010 2 - BEAG 131311 131809 4 120010 5 #8 133100 7 121010 1 1 CEAG 131303 131809 6 4 120010 5 #8 133100 7 121010 1 1 CEAF 131302 131808 815307 6 4 120011 5 #10 133000 7 121010 1 1 BEAG 131311 131809 3 or 4 815604 6 4 120010 3 #8 133100 4 121010 2 - BEAG 131311 131809 3ø 3 or 4 815704 6 4 120011 3 #10 133000 4 121010 2 - BEAG 131311 131809 208 1ø 2 815005 5 4 120010 2 #4 133300 2 121012 2 - GEAG 131312 131811 20 230 1ø 2 815205 5 4 120011 2 #4 133300 2 121012 2 - FEAG 131309 131811 20 380 3ø 3 or 4 815404 6 4 120010 3 #10 133300 4 121010 2 - BEAG 131311 131809 VOLT PHASE WIRE 30 208 3ø 3 815105 6 5 120012 6 #6 133200 7 30 208 3ø 4 815105 6 5 120012 6 #6 133200 30 230 3ø 3 815305 6 5 120013 5 #8 30 416 3ø 3 or 4 815605 6 5 120012 3 30 460/480 3ø 3 or 4 815705 6 5 120013 25 380 3ø 3 or 4 815405 6 5 24 208 3ø 3 815107 6 24 208 3ø 4 815107 24 230 3ø 3 24 416 3ø 24 460/480 20 RELAY COIL Cat. No. Part No. PART NO. * Oven assembly complete does not include oven relay or terminal block. These items must be ordered separately. When ordering oven assembly complete, specify 3-wire or 4-wire when applicable, as well as if dryer has computer or noncomputer controls. Electric Oven Component Application Chart 88 Currant Road / Fall River, MA 02720-4781 BUS BAR P/N 121011 KW Steam Coil/Valve Assembly Illus. No. Part No. Qty. 1 803500 1 803501 1 150300 165002 6 1 165003 1 142711 1 142713 1 165107 1 165102 1 165103 1 2 3 4 5 Telephone: (508) 678-9000 45 Description Large Steam Rack (for models mfd. with high pressure Only) Large Steam Rack (for models mfd. with low pressure Only) #10-16 x 1/2” Hex Washer TEK Screw Large Steam Coil (for models mfd. with high pressure Only) Large Steam Coil (for models mfd. with low pressure Only) 1” Closed Nipple (for models mfd. with high pressure Only) 1-1/4” Closed Nipple (for models mfd. with low pressure Only) 1” Motorized Steam Valve (for models mfd. with high pressure Only) 1-1/4” Steam Valve - 120 Volt (for models mfd. with low pressure Only) 1-1/4” Steam Valve - 230 Volt (for models mfd. with low pressure Only) Fax: (508) 678-9447 46 Microprocessor Reversing Control Assembly Telemecanique Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 150301 322808 137060 137013 153002 152004 150108 132426 6 1 1 4 2 2 4 1 132427 2 322807 151001 1 4 9 10 American Dryer Corporation Description #8-18 x 7/16” Phillips Pan Head TEK Screw Relay Box Cover Plate ONLY Arc Suppressor (A.S.) Board (3) Nylon Standoff 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Contactor (208/230/240 Volt - 50/60 Hz) Reversing Contactor Replacement Coil (208/230/240 Volt - 50/60 Hz) Contactor Mounting Panel ONLY #8-32 Pal Nut 88 Currant Road / Fall River, MA 02720-4781 Dual Timer Reversing Control Assembly 47 Telemecanique Illus. No. Part No. Qty. 1 2 3 4 150301 322808 150108 132200 132202 151001 153002 152004 150108 132426 6 1 4 1 1 2 2 2 4 1 132427 2 322807 151001 1 4 5 6 7 8 9 10 11 Telephone: (508) 678-9000 Description #8-18 x 7/16” Phillips Pan Head TEK Screw Relay Box Cover Plate ONLY #8-32 x 1/2” Pan Head Machine Screw Reversing Timer - 60 Hz ONLY Reversing Timer - 50 Hz ONLY #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Contactor (208/230/240 Volt - 50/60 Hz) Reversing Contactor Replacement Coil (208/230/240 Volt - 50/60 Hz) Contactor Mounting Panel ONLY #8-32 Pal Nut Fax: (508) 678-9447 48 Microprocessor Reversing Control Assembly Struthers-Dunn Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 150301 322808 137060 137013 153002 152004 150108 132404 132401 132416 6 1 1 4 2 2 4 1 1 2 132415 2 132407 2 322807 151001 1 2 9 10 11 American Dryer Corporation Description #8-18 x 7/16” Phillips Pan Head TEK Screw Relay Box Cover Plate ONLY Arc Suppressor (A.S.) Board (3) Nylon Standoff 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Pan Head Machine Screw Reversing Contactor - 208 Volt Reversing Contactor - 220/230 Volt Reversing Contactor Replacement Coil (208 Volt - 60 Hz) Reversing Contactor Replacement Coil (220/230 Volt - 60 Hz) Reversing Contactor Replacement Coil (240 Volt - 50 Hz) Contactor Mounting Panel ONLY #8-32 Pal Nut 88 Currant Road / Fall River, MA 02720-4781 Dual Timer Reversing Control Assembly 49 Struthers-Dunn Illus. No. Part No. Qty. 1 2 3 4 150301 322808 150108 132200 132202 151001 153002 152004 150108 132404 132401 132416 6 1 2 1 1 2 2 2 2 1 1 2 132415 2 132407 2 322807 151001 1 2 5 6 7 8 9 10 11 12 Telephone: (508) 678-9000 Description #8-18 x 7/16” Phillips Pan Head TEK Screw Relay Box Cover Plate ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Timer - 60 Hz ONLY Reversing Timer - 50 Hz ONLY #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Pan Head Machine Screw Reversing Contactor - 208 Volt Reversing Contactor - 220/230 Volt Reversing Contactor Replacement Coil (208 Volt - 60 Hz) Reversing Contactor Replacement Coil (220/230 Volt - 60 Hz) Reversing Contactor Replacement Coil (240 Volt - 50 Hz) Contactor Mounting Panel ONLY #8-32 Pal Nut Fax: (508) 678-9447 50 3-Phase (3ø) Motor, Electric Relay Panel Assembly Telemecanique Illus. No. Part No. Qty. 1 2 150309 311913 311921 137015 132425 6 1 1 1 1 132427 1 151000 150300 151001 311920 4 2 4 1 3* 4 5 6 7 8 Description #10-16 x 1/2” Hex Head TEK Crimptite Screw Service Box Cover Plate (9-7/8” x 4-3/8”) Service Box Cover Plate (9-7/8” x 5-3/4”) Arc Suppressor (A.S.) - capacitor - ONLY Impellor Contactor (208/230/240 Volt - 50/60 Hz) Impellor Contactor Replacement Coil (208/230/240 Volt - 50/60 Hz) #8-32 x 1/2” Phillips Round Head Machine Screw #10 x 1/2” Hex Washer TEK Screw #8-32 Pal Nut 3-Phase (3ø) Non-Reversing Contactor Mounting Bracket * For use on 3-phase (3ø) non-reversing microprocessor controlled dryer models ONLY. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 3-Phase (3ø) Motor, Electric Relay Panel Assembly 51 Furnas Illus. No. Part No. Qty. 1 2 150309 311913 311921 880662 132400 151001 6 1 1 1 1 2 3* 4 5 Description #10-16 x 1/2” Hex Head TEK Crimptite Screw Service Box Cover Plate (9-7/8” x 4-3/8”) Service Box Cover Plate (9-7/8” x 5-3/4”) Dual RC Suppressors ONLY Impellor Contactor ONLY 8-32 Pal Nut * Used on computer models ONLY. Telephone: (508) 678-9000 Fax: (508) 678-9447 52 Control/Heat Step Down Transformer for Globar® and High Pressure Motorized Steam Valve Models ONLY Illus. No. Part No. Qty. 1* 132002 1 2 3 - 150309 121400 880210 2 2 1 Description 200-Watt Transformer - 120 Volt (terminals are not included) #10-16 x 1/2” Hex Head TEK Crimptite Screw Universal Bushing Terminal Package for Globar® Transformer * Used on 208/230 Volt models ONLY. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Outer Top/Back Guard Assemblies Illus. No. Part No. Qty. 1 312513 1 2 3 150300 121101 7 1 4 121100 1 5 6 7 801521 152014 880501 1 3 1 8 103500 4 Telephone: (508) 678-9000 53 Description Outer Top Assembly (for gas and electric models Only) #10-16 x 1/2” Hex Washer TEK Screw Junction Box Cover ONLY (for gas and steam models Only) Junction Box ONLY (for gas and steam models Only) Back Guard Assembly 1/4-20 Free Spin Wash Nut 8” Damper Replacement (for non-heat reclaimer Models Only) Leveling Leg Fax: (508) 678-9447 54 Illus. No. 1 2 3 4 5 6* 7 8 - Heat Reclaimer Assembly Part No. Qty. 121101 121100 801521 152014 103500 143501 880502 143509 117505 1 1 1 3 4 1 1 1 2 Description Junction Box Cover ONLY Junction Box ONLY Back Guard Assembly 1/4-20 Free Spin Wash Nut Leveling Leg 8” x 6” x 6” Tee 6” Replacement Damper Assembly 6” Flexible Duct Aluminum Duct Tape (sold by the foot) * Damper assembly must be purchased separately. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 55 Arc Suppressor (A.S.) Relay Board Listing TYPE ELECTRIC VOLTAGE OF HEAT WIRE S ERVICE ARC SUPPRESSOR (A.S.) R ELAY B OARD PART N UMBERS (C ONTROL VOLTAGE ) S ERVICE VOLTAGE PHASE Glo Bar Non-Hi/Lo 120 1ø 2 137077 or 137150 --- Glo Bar Non-Hi/Lo 208/230 1ø 2 --- 137079 Glo Bar Non-Hi/Lo 208-480 3ø 3 --- 137079 Glo Bar Hi/Lo 120 1ø 2 137077 or 137150 --- Glo Bar Hi/Lo 208/230 1ø 2 137077 --- Glo Bar Hi/Lo 208-480 3ø 3 --- 137079 or 137150 Direct Spark Ignition (DSI) 120 1ø 2 137076 or 137151 --- Direct Spark Ignition (DSI) 208/230 1ø 2 --- 137078 or 137151 Direct Spark Ignition (DSI) 208-480 3ø 3 --- 137078 208/230 1ø 2 --- 137078 or 137151 208-480 3ø 3 --- 137078 or 137151* 208 3ø 4 137076 or 137151* --- 380-480 3ø 4 --- 137078 or 137151* Low Pressure 120 1ø 2 137076 or 137151 --- Low Pressure 208/230 1ø 2 --- 137078 or 137151 Low Pressure 208-480 3ø 3 --- 137078 High Pressure 120 1ø 2 137076 or 137151 --- High Pressure 208/230 1ø 2 --- 137078 or 137151 High Pressure 208-480 3ø 3 --- 137078 120 VOLT 208/230 VOLT GAS ELECTRIC 20 Kw through 30 Kw STEAM * ADC Part No. 137151 Solid State Relay (SSR) Board cannot be used with 3-phase (3ø) motors. IMPORTANT: Check label on Arc Suppressor (A.S.) Board to verify correct part number. NOTE: Solid State Relay (SSR) Boards (ADC Part No. 137150 and ADC Part No. 137151) can be used in place of electromechanical relay boards as noted. Telephone: (508) 678-9000 Fax: (508) 678-9447 56 Globar® Burner Assembly Specifications G LOBAR® BURNER ORIFICE L ISTING* ADC HEAT QTY. MODEL NUMBER R ECLAIMER NATURAL GAS LIQUID PROPA NE (L.P.) GAS D.M.S. PART NO . D.M.S. P ART N O. UDG-50B UDG-50BH No Yes 3 2 #31 #30 140818 140819 #49 #47 140803 140805 * Consult factory for elevations over 2,000 feet. G LOBAR ® B URNER A SSEMBLY L ISTING ADC MOD EL N UMBER UDG-50B UDG-50B UDG-50BH UDG-50BH D RYER C ONTROLS HEAT N ATURA L GAS LIQUID PROPANE (L.P.) GAS PART NO . P AR T N O. 809607 808704 809594 809543 809608 808804 809604 809548 R ECLAIMER Computer Noncomputer Computer Noncomputer No No Yes Yes NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately 2. Models with computer controls and optional heat reclaimer systems have hi/lo computerized gas valve system. 3. When ordering burner assemblies, specify model number and if computer or noncomputer controls. G LOBAR® L IQUID P ROP ANE (L.P.) CONVERSION KIT L ISTING* ADC MODEL NUMBER HEAT RECLAIMER LIQUID PROPANE (L.P.) KIT PART NUMBER UDG-50B UDG-50B UDG-50BH UDG-50BH No No Yes Yes 874035 874017 874019 874018 * Consult factory for elevations over 2,000 feet. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 57 Direct Spark Ignition (DSI) Burner Assembly Specifications DIRECT SPARK IGNITION (DSI) BURNER ORIFICE L ISTING * ADC MODEL NU MBER HEAT RECLAIMER N ATURA L GAS QTY. LIQUID PROPAN E (L.P.) GAS D.M.S. P ART NO . D.M.S. UDG-50D UDG-50DH No Yes 3 2 #29 #23 140820 140856 #48 #42 PART NO . 140804 140810 * Consult factory for elevations over 2,000 feet. DIRECT SP ARK IGNITION (DSI) B URNER A SSEMBLY LISTING ADC MODEL NUMBER BTU/H RATING UDG-50D UDG-50DH 160,000 140,000 HEAT NATURAL GAS LIQUID PROPANE (L.P.) GAS P ART NO. PART N O. 809627 809629 809628 809630 RECLAIMER NO YES NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately 2. When ordering burner assemblies, specify model number and if computer or noncomputer controls DIRECT S PARK IGNITION (DSI) LIQUID P ROPANE (L.P.) CONVERSION KIT L ISTING* ADC MODEL NUMBER LIQUID PROPANE (L.P.) KIT PART NUMBER UDG-50D UDG-50DH 874046 874047 * Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 58 Part No. 112039 112090 112280 114001 114006 120100 120300 120400 120500 120600 120707 120708 120800 120802 120902 120903 121014 121026 121499 121500 121503 122804 404500 404502 404506 404507 880200 Additional Parts Available Description “Black/White/Green Ground” Label “Phase 4 OPL Program Location Summary” Label “Clean Lint Screen” Label “CAUTION - Exhausted/Lint Screen” Label “WARNING - Fire Hazards” Label 3/8” Straight (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX Retainer Clip) 3/8” Greenfield (BX) Terminal Strip (2-position) Terminal Strip (3-position) 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-on Wire Nut 1/4” Insulated (female) Terminal Tab Receptacle Combination 4” Harness Tie 7” Harness Tie Harness Tie Mounting Clip Manometer (Hydro Gauge) for Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Almond “B” Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint Electrical Terminal (assortment) Kit American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADC 450097 1- 02/01/91-250 4- 10/20/94-100 7* 06/30/00-25 2- 03/25/92-100 5- 07/29/97-50 3* 11/19/93-100 6- 01/29/98-50