Download Intronics DX254 cable network tester
Transcript
Hobbes 256713D SmarTone & SmartProbe Kit™ The Hobbes SmarTone & SmartProbe Kit™ is a revolutionary network installation and troubleshooting tool beyond the traditional Methods to trace and identify cables. It uses advanced digital signal technology to trace and Identify cables in high speed and with high precision; Avoiding noise and false signals. It’s compatible with traditional analog tone generators and has also a cable tester; it can test cable continuity, telephone service/ polarity and even wire mapping. 256711D Features • Uses digital technology, avoiding noise and false signals • Traces/ identifies cables quickly • Sends digital tones in two distinct mode • Receiving tone sensitivity level: 9 levels • LED Bar and speaker are used as indicators • Can use probe to trace traditional 1 KHz analog tone • Cable map: pin to pin test for cable opened/ shorted/ Reversed/ crossed/ miss-wired • Cable continuity test: open/ continuity • Telephone service and polarity test: + polarity; - polarity; ringing • Probe has an adjustable speaker volume level suitable for various 256712D work environments 256713D 256711D Hobbes SmarTone™ Specifications Output power 5v Voltage protection 100V (Tel Check) Tone frequencies SmarTone: Encoded digital tone signal Legacy 1 KHz analog tone signal Power supply and life 9V square battery; the power consumption is less than 15mA Auto power off Soft switch, push to select the power on/off, with 30 min auto power off ability Dimensions 104 x 63 x 25 mm Weight 112g 1 256712D Hobbes SmartProbe™ Specifications Detect digital tone form SmarTone and 1K Hz analog tone from Tone detection traditional toner Power supply and life 9V square battery; the power consumption is about 45~ Max. 70mA Power switch Manual power on/off switch Dimensions 205mm * 35mm * 33.5mm Weight 98g Order information 256711D Hobbes SmarTone™ digital Tone Generator 256712D Hobbes SmartProbe™ digital tone receiver 256713D Hobbes Digital SmarTone & SmartProbe Kit™ 2