Download ENCORE ENL832-TX-EN
Transcript
ENL832-TX-EN Encore 32 bit LAN PCI Card Encore ENL832-TX-EN is an internal Auto switching 10/100 Mbps Fast Ethernet PCI interface LAN Card. ENL832-X-EN uses advanced IC Plus single-chip Fast Ethernet solution with complete set of industry standard features for high-speed Internet access. ENL832-TX-EN offers easy installation and cost-effective connection for SOHO and residential users. Features: ‧ ‧ ‧ ‧ ‧ 32-bit PCI V2.2 and ACPI Rev. 1.0 compliant Plug and play compatible for easy installation and configuration Supports 10Mbps and 100Mbps operation Friendly GUI configuration and management software Supports Half/Full duplex capability Specifications: Data Transfer Rates • 10 Mbps and 100 Mbps With two 2K byte independent receive and transmit FIFO’s Protocol • IEEE 802.3 10 Base-T • IEEE 802.3u 1000 Base-TX • IEEE 802.3x Full Duplex Flow Control Power Consumption • 1.5 Watts Interface • PCI Specification 2.2 Compliant Connector • RJ-45 X 1 Dimensions (Approximate) • 119 mm (L) x 35.8 mm (W) x 16 mm (H) Net Weight (Approximate) • 50 grams Operating Temperature • 0°C ~ 80°C Supported Operating Systems • Windows® 98SE, ME, 2000, XP, NT 4.0, • Linux • MAC 10.x • Novell • SCO 5 • Solaris • Unixware 7 Minimum System Requirements • Pentium Compatible Processor 200 MHz and above, 32 MB RAM and above, 30 MB available HDD space, CDROM Drive (fro driver installation) and 1 availabel PCI slot Regulations • FCC Part 15 Class B, CE