Download DT Research DT315CT
Transcript
DT315CT/ DT315CT-MD Mobile Tablet Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. DT315CT/ DT315CT-MD BASIC OPERATION GUIDE ENGLISH • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. INTRODUCTION Thank you for acquiring the latest addition to DT Research’s line of tablets — the DT315CT/ DT315CT-MD. Featuring a slim yet robust enclosure, the two-pound DT315CT/ DT315CT-MD with 9.7” TFT display is powered by the Intel® Atom™ dual-core processor, offering optimal combinations of performance and power savings. An external battery expansion option provides approximately 3-4 hours of additional battery operation for up to six hours of mobile usage. The DT315CT/ DT315CT-MD is available with Microsoft® Windows® Embedded Standard 7, Windows® 7 Professional or Linux operating systems. Each software operating system features web browser, client/ server computing software, media player, accessories, and applications support. This Class [B] digital apparatus complies with Canadian ICES-003. PACKAGE CONTENTS Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. • One DT315CT or DT315CT-MD with Internal Battery Pack (3760mAh), Handstrap and Grips • AC-DC Power Adapter with Power Cord • Basic Operation Guide Major options, depending on configuration: • Desktop Charging Cradle with DC-in Power Jack and Ethernet, USB and optional VGA Ports • External Battery Pack • External Battery Charger Kit * If your DT315CT/ DT315CT-MD contains barcode scanner or camera module, please refer to the POS module operation guide for detailed operation. DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com Copyright © 2013, DT Research, Inc. All Rights Reserved. DT Research is a registered trademark of DT Research, Inc. 8 ENGLISHsignage dtri com BOG011113DT315CTMDENG DT315CT/ DT315CT-MD The DT315CT Power/Battery LED Status: Battery/Power LED Wireless LED • Blue indicates the battery is 25% to 100% charged 1 • Blinking blue indicates the battery is charging • Orange indicates that the battery is between 11% to 25% A 2 B E C D F Precautions • Always exercise care when operating and handling the DT315CT/ DT315CT-MD. • Do NOT apply excessive pressure to the display screen. • Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT315CT/ DT315CT-MD should face away from direct light to reduce glare. Calibration Button Management Battery and Power Meter • If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other than the one provided or acquired from the manufacturer or its partners. Wireless Network Settings The DT315CT-MD • Blinking Orange indicates that the battery is below 10% Battery/Power LED Wireless LED 1 • In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the DT315CT/ DT315CT-MD and disconnect all power sources. Report the problem to your device provider immediately. A • Never attempt to disassemble the DT315CT/ DT315CT-MD, as this will void the warranty. 2 B E C D F THE DT315CT/ DT315CT-MD Basic Features The DT315CT/ DT315CT-MD wireless tablet integrates a bright and multi-touch Calibration Button Management display, one USB port, and embedded networking elements such as wireless LAN and Battery and Power Meter Bluetooth or optional 3G. The DT315CT/ DT315CT-MD is complemented by a suite of Wireless Network Settings Input/ Output Ports ENGLISH A Smart Card Reader B USB Port C Microphone Jack D Headphone Jack E SD Slot F DC Power Input 2 accessories, including battery expansion, charging cradles, and battery charger kit, for a Button Functions BUTTON 1 2 comprehensive user experience. ACTION A DT315CT/ DT315CT-MD typically integrates an 802.11a/b/g/n wireless LAN (WLAN) Programmable, As scanner trigger when equipped with the scanner module DT315CT-MD does not come with such a network adapter, please consult your device Push/release typically enters Standby mode, or Push/release exits Standby mode or restarts tablet (software dependent) Push and hold (over 4 seconds) invokes hardware shutdown adapter that may connect to other wireless devices or access points. If your DT315CT/ provider to establish the desired network connectivity. 3 ENGLISH DT315CT/ DT315CT-MD OPERATION Start Up Powering ON and OFF If the power up (from Standby or otherwise) is successful, the appropriate interface will To activate the DT315CT/ DT315CT-MD, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT315CT/ DT315CT-MD in Standby mode, push and quickly release the Power Button. To turn the DT315CT/ DT315CT-MD off for extended storage, power off safely using any software function that “shuts down computer” provided in the software operating system. be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established. Configuring the Mobile Tablet The DT315CT/ DT315CT-MD may be configured using the utilities and methods dictated by the software operating system. The DT315CT/ DT315CT-MD should be configurable for various properties such as user profiles, network features, and several system NOTE: elements. The battery packs shipped with your tablet may be low in power—please use the AC-DC adapter with the DT315CT/ DT315CT-MD when setting up for the first time to fully charge the internal battery pack. You may charge the external battery pack with it attached to the DT315CT/ DT315CT-MD, or with the optional external battery charger kit. Calibration NOTE: When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may have been drained substantially. Try unplugging/ replugging the AC-DC adapter to the DT315CT/ DT315CT-MD a few times to activate the charging process. The touch display for the DT315CT/ DT315CT-MD is calibrated before shipping. In the event that the calibration has been modified or is unsatisfactory, the respective calibration routines (e.g., PenMount (PM)) to calibrate the touch interface may be used. Wireless Networking Wireless LAN The DT315CT/ DT315CT-MD is often delivered with an embedded (user-inaccessible) 802.11a/b/g/n WLAN adapter equipped with a hidden custom antenna. • Through the support of typical WLAN adapters, the DT315CT/ DT315CT-MD should be able to detect all 802.11 access points in the vicinity for you to select the access NOTE: To conserve power, use (push and quick release) the Power Button to put the tablet in “Standby” mode while not in use. Pushing briefly on the same button will wake up the system within seconds. point of your choice for connection. • The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT315CT/ DT315CTMD and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access. NOTE: Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal operation. ENGLISH 4 • When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc. • Refer to the access point operating manuals for setting up the 802.11 access points. 5 ENGLISH DT315CT/ DT315CT-MD USING THE Mobile Tablet Bluetooth The DT315CT/ DT315CT-MD features a built-in Bluetooth adapter that operates on the Microsoft Windows Bluetooth protocol. The Bluetooth configuration application is invoked from the System Tray or from the Control. Follow the instructions and options provided within the application to configure and invoke Bluetooth connectivity with the corresponding peripherals. Peripherals Support Through its USB port, the DT315CT/ DT315CT-MD supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, and system software recovery and updates. The DT315CT/ DT315CT-MD is also compatible with custom mountable cradle options. These securable NOTE: Bluetooth devices or accessories that are not compatible with the Microsoft and mountable cradles provide an interface to VESA mounts and arms, and to ports that Windows Bluetooth protocol may not work with the DT315CT/ DT315CT-MD. may include USB, Ethernet, and pass-through power. Button Management Remote Management Where supported by software, the hard buttons on the left side of DT315CT/ DT315CT- Depending on software configuration, the DT315CT/ DT315CT-MD can be centrally MD are programmable to perform a function of the user’s choice. To activate the button managed for asset monitoring and for software control. Please consult your device re-assignment application, invoke the Button Manager application provider. . Battery and Power Management The DT315CT/ DT315CT-MD is equipped with an internal 3760mAh Li-Ion battery pack that is capable of supporting approximately 1.5–2 hours of continuous operation. With the optional external battery pack that clips (hot-pluggable) onto the back of the tablet, the maximum period of continuous operation will be approximately 3–4 hours. The period between battery recharges can be significantly lengthened by putting the device into Standby mode through the Power Button (see Buttons Function Table) whenever the tablet is not in use. Depending on the operating software, the DT315CT/ DT315CTMD may also be configured to enter various power-saving modes via the Power Button or through timed entry. Desktop Cradle The DT315CT/ DT315CT-MD is complemented by an optional Desktop Cradle for support, pass-through charging, and connection to a range of USB peripherals, including keyboard and mouse. The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter, an Ethernet port, a VGA port (optional) and USB ports. Always seat the DT315CT/ DT315CT-MD securely onto the cradle. The cradle must be powered by the AC-DC adapter for the Ethernet and USB ports to function. The battery packs on the DT315CT/ DT315CT-MD may be recharged by connecting the AC-DC adapter directly to the DC-in port on the DT315CT/ DT315CT-MD or through the DC-in port on the Desktop Cradle while the DT315CT/ DT315CT-MD is docked to the Cradle. ENGLISH 6 7 ENGLISH